GemTek Technology C920128G 802.11g Wireless LAN PCI Adapter User Manual WL 360g generic

Gemtek Technology Co., Ltd. 802.11g Wireless LAN PCI Adapter WL 360g generic

Manual

                                                                                                                                                                                                                                                                     User’s Guide  0Gemtek Technology Co., Ltd. WL-360G 802.11g Wireless LAN PCI Adapter  User's Manual                                                                                                          Mar. 29, 2003 (Draft 1.0)
                                                                                                                                                                                                                                                         User’s Guide  1Copyright statement  No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording, or otherwise without the prior writing of the publisher.  March 2003
                                                                                                                                                                                                                                                                     User’s Guide  2Gemtek Technology Co., Ltd. .Contents  1. Introduction.................................................................................................................... 3 2. Wireless LAN Basics .................................................................................................... 4 3. Installation for Windows platform............................................................................... 5 3.1. Installation Overview.............6 3.2. Install Procedure for Windows XP 7 3.3. Install Procedure for Windows 98/ME/2000 9 4. Configuration Utility....................................................................................................16 4.1 Link Information......................18 4.2 Connections .............................20 4.3 Profile Setting ..........................21 4.4 About...........................................24 4.5 Windows XP Zero Configuration 25 5. Troubleshooting..........................................................................................................27
                                                                                                                                                                                                                                                         User’s Guide  31. Introduction  Thank you for purchasing your Wireless LAN, Wireless LAN 802.11g Adapter. This Quick Installation Guide will assist you with the installation procedure.   The package you have received should contain the following items:  • Wireless LAN  802.11g Adapter • Quick Installation Guide • CD containing Wireless LAN Management utility, drivers and Multi-lingual User’s Guide Note: if anything is missing, please contact your vendor   The CD contains drivers and Configuration Utility program that is used for managing the Wireless LAN Adapters and establishing the wireless connection with your Local Area Network.   Note: This manual is valid for all Wireless LAN 11g Series products.
                                                                                                                                                                                                                                                                     User’s Guide  4Gemtek Technology Co., Ltd.2. Wireless LAN Basics Wireless LAN (Local Area Networks) systems offer a great number of advantages over a traditional, wired system. Wireless LANs (WLANs) are more flexible, easier to setup and manage and often more cost effective than their wired equivalence.  Using radio frequency (RF) technology, WLANs transmit and receive data over the air, minimizing the need for wired connections. Thus, WLANs combine data connectivity with user mobility, and, through simplified configuration, enable movable LANs.  With wireless LANs, users can access shared information without looking for a place to plug in and network managers can set up or augment networks without installing or moving wires. Wireless LANs offer the following productivity, convenience and cost advantages over traditional wired networks:     • Mobility  - Wireless LAN systems can provide LAN users with access to real-time information anywhere in their organization. This mobility supports productivity and service opportunities not possible with wired networks.  • Installation Speed and Simplicity  - Installing a wireless LAN system can be fast and easy and can eliminate the need to pull cable through walls and ceilings.   • Installation Flexibility - Wireless technology allows the network to go where wires cannot go.  • Reduced Cost-of-Ownership - While the initial investment required for wireless LAN hardware might be higher than the cost of wired LAN hardware, overall installation expenses and life-cycle costs will be significantly lower. Long-term cost benefits are greatest in dynamic environments requiring frequent moves, adds, and changes.   • Scalability - Wireless LAN systems can be configured in a variety of topologies to meet the needs of specific applications and installations. Configurations are easily changed and range from peer-to-peer to full infrastructure networks, also allow roaming over a broad area.
                                                                                                                                                                                                                                                         User’s Guide  53. Installation for Windows platform The following section will assist you in installing wireless LAN Adapter successfully. You will first install software (Utility) and then insert / attach the Wireless LAN Adapter to your system, and finally set the network properties to accommodate resource sharing and select the type of wireless network that you wish to install. The Wireless LAN card can easily be installed and used, without bothering to connect cables for keeping your computer to use network resources.
                                                                                                                                                                                                                                                                     User’s Guide  6Gemtek Technology Co., Ltd.3.1. Installation Overview Here are some steps you will perform in establishing your wireless network connection:  l Install the Access Point at first. AP is needed in case of Infrastructure network mode.  l Install the software using the Install CD.  l Install the Wireless LAN Card (WIRELESS LAN 802.11g Adapter). l Install the network protocol(s) required to communicate on your network. Most likely you will need the TCP/IP protocol.
                                                                                                                                                                                                                                                         User’s Guide  73.2. Install Procedure for Windows XP  1.   Insert the given Installation CD in the CD-ROM and then click on the Setup. Follow the instruction to finish the installation.  2. Insert your WLAN card into PCMCIA/PCI slot or USB connector of your system, and then system will detect new hardware.          Select “Install the software automatically (Recommended) ”, and then click Next to continue.                          Once your system detected the driver, Microsoft will show a warning message as below.
                                                                                                                                                                                                                                                                     User’s Guide  8Gemtek Technology Co., Ltd.  Click “ Continue Anyway ” for next step.        After copy the file to your system, then the setup is finish.
                                                                                                                                                                                                                                                         User’s Guide  93.3. Install Procedure for Windows 98/ME/2000    Please follow the following steps one by one in order to install the WLAN  Adapter successfully.  1. Power on your computer and allow Windows 98/ME/2000 to load fully. 2. Be sure that there is no Wireless LAN 11Mbps Adapter inserted yet.  3. Insert the given Installation CD in the CD-ROM and then click on the Setup.     At the “ Welcome” window, click Next.          Note: Do not insert the WLAN Adapter until you are asked to do so, failure of which may result in unsuccessful ins tallation of your  WLAN device.
                                                                                                                                                                                                                                                                     User’s Guide  10Gemtek Technology Co., Ltd.   4. Accept the license agreement.                                      Accept the license agreement. Click Yes to accept.                                             Click Yes to finish the setup.
                                                                                                                                                                                                                                                         User’s Guide  115. Insert / attach Wireless LAN 802.11g Adapter to your system Windows will recognize the WLAN adapter and auto detect the driver, if the system did not find the driver automatically, please install the driver manually.                         Click Yes to finish the installation.                                                6. Click the right button of mouse on My Computer à Properties à Device Manager.   Check whether it has WLAN adapter in one of the sockets or not.  If you find Wireless LAN 802.11g Card in one of the sockets, it means the card is detected properly.                      7.  Click right button of mouse on the Network Neighborhood.
                                                                                                                                                                                                                                                                     User’s Guide  12Gemtek Technology Co., Ltd.8. Select Properties from the pop up menu. The network box appears and you see two main tables: General and Sharing..     9. Click on the General tab and then click on the Install button. Select Network Component Type box appears. Click on the Protocol then click the Add button.   10. Select Network Protocols box appears.  From the list of network protocols list, select NetBEUI, then click OK.
                                                                                                                                                                                                                                                         User’s Guide  1311.                                      12. The NetBEUI protocol is now installed. After clicking on  OK return back to Network Component Type box. 13. Repeat the step 15 and 16 to add IPX/SPX protocol. 14. Repeat the step 15 and 16 to add TCP/IP protocol. 15. Click  on the TCP/IP option for setting the IP address for your computer. You can select either Obtain an IP address automatically or Use the following IP address setting. If you choose first setup then enter the IP value, Subnet masking, DNS, Domain/ Workgroup name, and Gateway Address values. After setting these parameters appropriately, click OK to return to Network Component Type and you can select the File and Printer Sharing options as well as the Access to your computer like other users connected to that network by setting the computer sharing options. Click on OK.
                                                                                                                                                                                                                                                                     User’s Guide  14Gemtek Technology Co., Ltd.                                         16. Screen message do want to restart your Computer will pop up. Select Yes. It will shut down your computer and restart.                        Important: Restart your computer to make the changes effective before you reinstall the driver.
                                                                                                                                                                                                                                                         User’s Guide  15Uninstall Procedure   Step 1:              If you want to uninstall the WLAN adapter, just simply click                                   Start Menu à Program  à  Wireless Lan à Uninstalled,                        it shall uninstall all related programs.                           Step 2:    Restart your Computer.
                                                                                                                                                                                                                                                                     User’s Guide  16Gemtek Technology Co., Ltd.4. Configuration Utility Wireless LAN 802.11g Wireless LAN adapter uses its own management software. All functions controlled by user are provided by this application. Usually this application starts automatically,  or click    icon from Start Menu to start the Utility application. A new icon  -  should appear in your Icon tray. If the icon is in red, it means that Wireless LAN 802.11g NIC configuration is invalid or incomplete. Sometimes icon can be colored in yellow. This may happen when communication is defined poor connection or incorrectly.  Figure 1 Icon tray with a new icon
                                                                                                                                                                                                                                                         User’s Guide  17  User can navigate through “sheets”, by clicking tabs.  “X” button will minimize window.  To provide more information, click “More…” button. Below description explains the use  and meanings of the various screen messages.
                                                                                                                                                                                                                                                                     User’s Guide  18Gemtek Technology Co., Ltd.4.1 Link Information  - Connected To Network -  -   This field is used to display the current status of connection. When the state shows “Connected to Network“ means normal flow of operation in Infrastructure mode. The PC is connected to access point.  Networking is available.  A state of “Scanning” means that the node is searching for available access point and detecting  the SSID for an available access point within range.  This field will also display an error message for some reason if the driver fails to initialize.   Network Type Infrastructure Mode   - The driver will scan all available channels continuously until it finds one or more Access Points that match its SSID.  At that point it will try and authenticate and associate with the Access Point.       Peer to Peer Mode   - The driver will scan for 5 seconds looking for an existing Ad Hoc network      using the same SSID.
                                                                                                                                                                                                                                                         User’s Guide  19- Current Channel and Transmit Rate     Shows the channel of the radio and transmit rate being currently used for an active connection.        This value has no meaning when the radio is “Scanning”  - Link Quality The Link Quality bar graph is only active when the node is in Infrastructure Mode.  The bar graph displays the quality of the link between the node and Access Point.     - Signal Strength       The Signal Strength bar graph is only active when the node is in Infrastructure Mode. The bar           graph displays normalized signal strength as reported by the radio, averaged over all frames over      100 bytes long that are received from the Access Point.
                                                                                                                                                                                                                                                                     User’s Guide  20Gemtek Technology Co., Ltd. 4.2 Availiable Networks   The Connections Tab shows  current status of available APs within the network.                                       User may select profile or ESSID from above list, click “Connect” to connect with the AP.  Click “Refresh” to rescan the network, this utility with site survey function, it will detect and list all available APs within network.     .
                                                                                                                                                                                                                                                         User’s Guide  214.3 Profile Setting  Profile Setting allows user to create profiles for different network environments.                                     Click “Add” button to create new profiles.  “Edit” for editing current exist profile. Click “Delete” button if you wish to delete profiles.                                        - Network Type        This field allows you to select from a list of supported Network “Modes”.  The modes displayed will have two values:  “Peer to Peer” and “Access Point”.
                                                                                                                                                                                                                                                                     User’s Guide  22Gemtek Technology Co., Ltd.    Peer to Peer   - This is the 802.11b peer-to-peer mode of operation.  In 802.11b Ad Hoc, only one wireless “cell” is supported for each different SSID.  All communication is done from Client to Client without the use of an Access Point. 802.11b  Ad Hoc networking uses the same SSID for establishing the wireless connection.        Access Point - This mode of operation requires the presence of an 802.11b  Access Point.  All communication is done via the Access Point, which relays packets to other wireless Clients in the BSS as well as to nodes on a wired network such as Ethernet.       Transmit Rate – The transmission rate at which client of AP transmits the data packets. You may set this to fixed 1Mbps, fixed 2 Mbps, fixed 5.5 Mbps, fixed 11 Mbps or Automatic.             Encryption (WEP) - You may desire an additional measure of security on your wireless network, which can be achieved by using WEP (Wired Equivalent Privacy) encryption.                        When an encrypted frame is received it will only be accepted if it decrypts correctly.  This will only happen if the receiver has the WEP Key used by the transmitter.
                                                                                                                                                                                                                                                         User’s Guide  23   This panel allows to entry for 64/128-bit encryption according to WEP function select. To be written to the driver and registry, such as Hexadecimal format, each key must consist of hex digits, which means that only digit 0-9 and letters A-F are valid entries. If entered incorrectly program will not write keys to a driver.                                                                .
                                                                                                                                                                                                                                                                     User’s Guide  24Gemtek Technology Co., Ltd. 4.4 About       “About” tab shows the product version including the detail of Driver, Application and firmware versions. Users must use this version number when reporting their problems to technical support.
                                                                                                                                                                                                                                                         User’s Guide  254.5 Windows XP Zero Configuration   Microsoft provides Windows XP Zero Configuration, which means user doesn’t need to use software provided by the manufacturer. Instead, Windows XP recognizes the adapter and provides the necessary driver and configuration software.   If your station is within range of a WLAN, Windows XP announces that one or more wireless networks are available and it suggests that you click the Network icon to see a list of available networks.                                                                Configuring Automatic Network Connections   To configure one or more wireless networks for auto connection, follow these steps:   1. Right-click a Network icon in the notification area at the bottom of the screen to display a pop-up menu. Click the Open Network Connections option.   2. Right-click the Wireless Network Connection icon and click Properties in the Pop-up menu. Windows XP displays the Wireless Network Connection Properties dialog.   3. Click the Wireless Networks tab, shown as below. Notice that the wireless network, that was presented when you first insert the wireless NIC, is already listed.
                                                                                                                                                                                                                                                                     User’s Guide  26Gemtek Technology Co., Ltd.                                                     4. To add another network to the list, click the Add button on the Wireless Networks tab to display the Wireless Network Properties dialog.   5. Type a network name (SSID) in the Network name test box.   6. If you have implemented a system automatically providing users with network keys and /or WEP keys, click OK to save this network SSID and move on to the next network that you want to configure.    7. If you are setting up an ad hoc mode wireless connection, click the last check box in the dialog. Otherwise, if you are configuring a connection to an AP, leave the check box uncheck and click OK. Windows XP adds the network to the list of preferred networks in the Wireless Network Connection Properties dialog box.   8. When you finish adding all wireless networks to which you expect this computer to need access, click OK.   Note: XP includes support for IEEE 802.1X standard for port –level authentication of stations in the network.
                                                                                                                                                                                                                                                         User’s Guide  275. Troubleshooting             If you encounter any problems during the installation, or to confirm that the WLAN 11Mbps device is installed properly, please read the following troubleshooting section.    In Windows 98:      To check that the WLAN 802.11g device is installed properly, please do the following: 1. Go to START>SETTINGS>CONTROL PANEL>NETWORK.  Choose the Configuration Tab.  If you find the  WLAN  802.11g Adapter, it means the card is installed properly. If you see the  Yellow Question-mark (?) means the resources are conflicting. (Please read further in this section for solutions.) -or- 2. Right click on  My Computer  and select  Properties.  Select the  Device Manager  and click on the Network Adapter. You will find the WLAN 802.11g Adapter if it is installed successfully.  If you see the Yellow sign, the resources are conflicting.  Click on the PCMCIA Card and then on the PCMCIA Card Service, you can see the status of the PC card.  If there is a yellow sign either on the adapter or the PC card, please check the following.  1. Check to see if your computer has a free IRQ.  If not, make an IRQ free by assigning the same IRQ to some devices, for example COM 1; COM 2 can be assigned the same IRQ values. 2. Check that you have inserted the right card and have installed the proper driver.             In Windows 2000:     1. Check the Windows 2000 Diagnostics.  See if there is any conflict in the resource allocation or the I/O Address, IRQ allocations.  If you find that the IRQ or I/O Addresses are already assigned to some other devices, you must change that value.  I/O Address needs 40h byte length.  2. Go to the Control panel.  Double click on the PCMCIA Card and you will see WLAN Adapter.  Double clicking on that will show you the Card Information, driver name and the driver file. If you do not find the names, there are some problems and the driver is not installed properly.  Reinstall the driver.  Note: Check the PnP BIOS setup menu and select no in case of the WLAN Adapter installation.
                                                                                                                                                                                                                                                                     User’s Guide  28Gemtek Technology Co., Ltd.Federal Communication Commission Interference Statement  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.  FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.              FCC RF Radiation Exposure Statement:            This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.  This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.  This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
                                                                                                                                                                                                                                                         User’s Guide  29 R&TTE Compliance Statement This equipment complies with all the requirements of the DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of 9 March 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE).  The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000.  Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this manual and of the computer manufacturer must therefore be allowed at all times to ensure the safe use of the equipment.  EU Countries intended for use The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark, Finland, France (with Frequency channel restrictions), Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden and United Kingdom.  The ETSI version of this device is also authorized for use in EFTA member states Iceland, Liechtenstein, Norway and Switzerland.  EU Countries Not intended for use  None.  Potential restrictive use France: Only channels 10,11,12, and13

Navigation menu