Garmin A2AVGC00 Connected Personal Navigation Device User Manual final part 2

Garmin International Inc Connected Personal Navigation Device final part 2

UserManual.wiki >

A2AVGC00 User Manual >

user manual final - part 2

Contents

1. user manual final - part 1
2. user manual final - part 2

user manual final - part 2

Garmin eet™ 590Quick Start ManualOctober 2012 190-01505-01_0B Printed in Taiwan190-01505-01_0B.indd 1 10/17/2012 1:58:32 PM

2 Garmineet590QuickStartManualFleet SubscriptionBefore you can use the eet management features on the device, your company must have an active eet subscription.Connecting the Device to Vehicle Power WARNINGThis product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, store it out of direct sunlight. NOTICEIn order for the device to receive eet management information, do not unplug the power cable.Before you use your device on battery power, you should charge it.1. Plug the vehicle power cable ➊ into the USB port on the mount ➋.➊➋➌➍2. Snap the mount onto the suction cup ➌. 3. Press the suction cup to the windshield.4. While pressing, ip the lever ➍ back toward the windshield.5. Fit the bottom of your device into the mount.6. Tilt your device back until it snaps into place.190-01505-01_0B.indd 2 10/17/2012 1:58:32 PM

Garmineet590QuickStartManual 37. Plug the other end of the vehicle power cable into a power outlet in your vehicle.Turning Off the Device1. Hold the Power key ➊ for four seconds.➊2. Select Off.Using the Main Menu➊ ➋ ➌➎➍• Select ➊ to enter the time clock.• Select ➋ to access messages and stops.• Select ➌ to view the map.• Select ➍ to nd a destination.• Select ➎ to open the menu of tools and settings.New Stops and MessagesYour device displays notications when you receive new stops or messages.• On the main menu, a notication indicates when you have new stops, messages, or ( ) both.• On the map, or appears blue when you have new stops or messages.• On the tab or the tab, indicates the number of new stops or messages.190-01505-01_0B.indd 3 10/17/2012 1:58:33 PM

4 Garmineet590QuickStartManual ◦A blue notication indicates that new stops or messages have arrived since the last time you viewed the list of stops or messages. ◦A gray notication indicates that you have unread messages or stops.Navigating to a StopBefore you can navigate to a stop, your company must send a stop to your device.1. From the main menu, select Dispatch > .2. Select a stop.3. Select Go!.Viewing a MessageBefore you can view a message, your company must send a message to your device.1. From the main menu, select Dispatch > .2. Select a message.Sending a MessageYou can send a short message to your company. Your device may include quick messages, which are pre-written messages loaded by your company.1. From the main menu, select Dispatch > .2. Select an option: • To send a custom message, select New Message, and enter a message.• To send a quick message, select Quick Message, and select a message.190-01505-01_0B.indd 4 10/17/2012 1:58:33 PM

Garmineet590QuickStartManual 53. Select Send.Adding a User to the Time ClockBefore you can add a user to the time clock, the user name must be provisioned by your company. If your company has enabled time clock PINs for the device, you must know the PIN for the user name you are adding.You can add multiple time clock users to the same device.1. From the main menu, select Time Clock.2. Select Add User.3. Enter the user name provided by your company, select OK.4. If necessary, enter the time clock PIN for the user name.The user name appears in the list in “Validating” status. When the server validates the user, the status changes to “not set.”Setting the Status of a UserBefore you can set the status of users, you must add one or more users to the device, and your company must send a list of statuses to the device.You can set the status of one or more time clock users.1. From the main menu, select Time Clock.2. If time clock PINs are enabled on the device, select your user name, and enter your time clock PIN.3. Select one or more users.4. Select Set Status.5. Select the status.190-01505-01_0B.indd 5 10/17/2012 1:58:33 PM

6 Garmineet590QuickStartManualAbout Points of InterestFinding Points of Interest1. From the main menu, select Search > Points of Interest.2. Select a category.3. If necessary, select a subcategory.4. Select a destination.Searching Within a CategoryTo narrow your search results, you can search within some categories.1. Select Search > Points of Interest.2. Select a category.3. If necessary, select a subcategory.4. Select .5. Enter all or part of the name.6. Select Done.Your Route on the MapNOTICEThe speed limit icon feature is for information only and does not replace the driver’s responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times. Garmin will not be responsible for any trafc nes or citations that you may receive for failing to follow all applicable trafc laws and signs.Your route is marked with a magenta line on the map. If you depart from the original route, your device recalculates the route. A speed limit icon could appear as you travel on major roadways. 190-01505-01_0B.indd 6 10/17/2012 1:58:33 PM

Garmineet590QuickStartManual 7Using the Map Functions➊ ➋ ➌➍➎➏➐• Select ➊ to view the next turn. If a view of a junction exists, the junction view appears.• Select ➋ to view the turn list.• Select ➌ to view stops.• Select ➍ to view messages.• Select ➎ to change the data eld.• Select ➏ to view the Where Am I? page. • Select ➐ to view trip information.About Sleep ModeSleep mode conserves battery power when your device is not in use.Using Sleep Mode• While the device is on, select the power key to put the device into sleep mode. • While the device is in sleep mode, select the power key, and double-tap to wake the device, if necessary. 190-01505-01_0B.indd 7 10/17/2012 1:58:33 PM

Navigation menu