Garmin A2401 Outdoor GPS User Manual

Garmin International Inc Outdoor GPS Users Manual

Contents

Users Manual

AA2401Owner’s ManualDRAFT
© 2013–2016 Garmin Ltd. or its subsidiariesAll rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.Garmin®, the Garmin logo, ANT+®, and City Navigator® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. BaseCamp™, chirp™, Garmin Connect™, Garmin Express™, HomePort™, and tempe™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. Mac® is a trademark of Apple Inc., registered in the U.S. and other countries. Windows® is a registered trademark of Microsoft Corporation in the United States and other countries. microSD® and the microSDHC logo are trademarks of SD-3C, LLC. Other trademarks and trade names are those of their respective owners.This product is ANT+® certified. Go to www.thisisant.com/directory for a list of compatible products and apps.DRAFT
Table of ContentsIntroduction.....................................................................1Device Overviews....................................................................... 1Device Overview....................... 1Device Overview........................................... 1Battery Information..................................................................... 1Maximizing Battery Life.......................................................... 1Turning On Battery Save Mode............................................. 1Long-Term Storage................................................................ 1Installing the NiMH Battery Pack................................................ 1Charging the Battery Pack..................................................... 2Installing AA Batteries.................................................................2Turning On the Device................................................................ 2Keys............................................................................................ 2Acquiring Satellite Signals.......................................................... 2Using the Main Pages.................................................... 2Opening the Main Menu............................................................. 2Map............................................................................................. 2Changing the Map Orientation............................................... 2Measuring Distance on the Map............................................ 3Map Settings.......................................................................... 3Compass.....................................................................................3Calibrating the Compass........................................................3Using the Compass................................................................3Course Pointer....................................................................... 3Navigating with Sight 'N Go................................................... 3Trip Computer............................................................................. 3Trip Computer Settings.......................................................... 3Elevation Plot.............................................................................. 4Elevation Plot Settings........................................................... 4Calibrating the Barometric Altimeter...................................... 4Restoring Default Page Settings................................................ 4Waypoints, Routes, and Tracks.................................... 4Waypoints................................................................................... 4Creating a Waypoint.............................................................. 4Projecting a Waypoint............................................................ 4Navigating to a Waypoint....................................................... 4Editing a Waypoint................................................................. 4Deleting a Waypoint............................................................... 4Routes........................................................................................ 4Creating a Route.................................................................... 4Editing the Name of a Route.................................................. 4Editing a Route...................................................................... 4Viewing a Route on the Map.................................................. 5Deleting a Route.................................................................... 5Navigating a Saved Route..................................................... 5Viewing the Active Route....................................................... 5Stopping Navigation............................................................... 5Reversing a Route................................................................. 5Tracks......................................................................................... 5Tracks Settings...................................................................... 5Viewing the Current Track..................................................... 5Saving the Current Track....................................................... 5Clearing the Current Track.....................................................5Deleting a Track..................................................................... 5Navigating a Saved Track...................................................... 5Purchasing Additional Maps....................................................... 5Finding an Address................................................................ 5Main Menu Features and Settings................................ 5Camera and Photos.................................................................... 5Taking a Photo....................................................................... 5Viewing Photos...................................................................... 5Using the Flashlight.................................................................... 6Geocaches..................................................................................6Downloading Geocaches Using a Computer......................... 6Navigating to a Geocache......................................................6chirp™....................................................................................6Sending and Receiving Data Wirelessly..................................... 6Setting a Proximity Alarm........................................................... 6Selecting a Profile....................................................................... 6Area Calculation......................................................................... 6Calculating the Size of an Area............................................. 6Satellite Page..............................................................................6GPS Satellite Settings............................................................7Garmin Adventures..................................................................... 7Sending Files to BaseCamp.................................................. 7Creating an Adventure........................................................... 7Starting an Adventure............................................................ 7VIRB® Remote........................................................................... 7Waypoint Averaging....................................................................7Bluetooth Connected Features................................................... 7Pairing a Smartphone with Your Device................................ 7Phone Notifications................................................................ 7Additional Main Menu Tools....................................................... 8Customizing the Device................................................. 8Customizing the Data Fields....................................................... 8Data Fields............................................................................. 8System Settings.......................................................................... 9GPS and GLONASS.............................................................. 9Serial Interface Settings......................................................... 9Display Settings.......................................................................... 9Adjusting the Backlight Brightness............................................. 9Setting the Device Tones..........................................................10Camera Settings....................................................................... 10Marine Settings......................................................................... 10Setting Up Marine Alarms.................................................... 10Resetting Data.......................................................................... 10Changing the Page Sequence.................................................. 10Adding a Page..................................................................... 10Removing a Page................................................................ 10Customizing the Main Menu..................................................... 10Changing the Units of Measure................................................ 10Time Settings............................................................................ 10Position Format Settings...........................................................10Altimeter Settings......................................................................11Routing Settings....................................................................... 11Profiles...................................................................................... 11Creating a Custom Profile.................................................... 11Editing a Profile Name......................................................... 11Deleting a Profile..................................................................11Device Information....................................................... 11Support and Updates................................................................ 11Setting Up Garmin Express................................................. 11Registering Your Device...................................................... 11Attaching the Carabiner Clip..................................................... 11Removing the Carabiner Clip............................................... 11Attaching the Wrist Strap.......................................................... 11Device Care.............................................................................. 12Cleaning the Device............................................................. 12Data Management.................................................................... 12File Types............................................................................ 12Installing a Memory Card..................................................... 12Connecting the Device to Your Computer........................... 12Transferring Files to Your Device........................................ 12Deleting Files....................................................................... 12Disconnecting the USB Cable..............................................12Specifications............................................................................12Appendix....................................................................... 13Contacting Garmin Product Support......................................... 13Table of Contents iDRAFT
Turning On the Backlight.......................................................... 13Optional Accessories................................................................ 13tempe™............................................................................... 13Using Optional Fitness Accessories.................................... 13Tips for Pairing ANT+ Accessories with Your Garmin Device....................................................................................... 13Troubleshooting........................................................................ 13Resetting the Device............................................................ 13Viewing Device Information................................................. 13Restoring All Default Settings.............................................. 13Index.............................................................................. 14ii Table of ContentsDRAFT
Introduction WARNINGSee the Important Safety and Product Information guide in the product box for product warnings and other important information.Device OverviewsDevice OverviewÀInternal GPS/GLONASS antennaÁKeysÂPower keyÃMini-USB port (under weather cap)ÄMCX connector for GPS antenna (under weather cap)ÅmicroSD® card slot (under batteries)ÆBattery compartmentÇMounting spineÈBattery cover D-ringNOTE: The MCX connector is not included on all models.Device OverviewÀInternal GPS/GLONASS antennaÁKeysÂPower keyÃMini-USB port (under weather cap)ÄCamera lensÅmicroSD card slot (under batteries)ÆBattery compartmentÇMounting spineÈBattery cover D-ringBattery Information WARNINGThe temperature rating for the device may exceed the usable range of some batteries. Alkaline batteries can rupture at high temperatures.Do not use a sharp object to remove batteries. CAUTIONContact your local waste disposal department to properly recycle the batteries.NOTICEAlkaline batteries lose a significant amount of their capacity as the temperature decreases. Use lithium batteries when operating the device in below freezing conditions.Maximizing Battery LifeYou can do several things to extend the life of the batteries.• Reduce the backlight brightness (Adjusting the BacklightBrightness, page 9).• Reduce the backlight timeout (Display Settings, page 9).• Use battery save mode (Turning On Battery Save Mode,page 1).• Decrease the map drawing speed (Map Settings, page 3).• Turn off GLONASS (GPS and GLONASS, page 9).Turning On Battery Save ModeYou can use battery save mode to prolong the battery life.Select Setup > Display > Battery Save > On.In battery save mode, the screen shuts off when the backlight times out. You can select   to turn on the screen, and you can double tap   to view the status page.Long-Term StorageWhen you do not plan to use the device for several months, remove the batteries. Stored data is not lost when batteries are removed.Installing the NiMH Battery PackThe device operates using the optional NiMH battery pack (not included with all models) or two AA batteries (Installing AA Batteries, page 2).1Turn the D-ring counter-clockwise, and pull up to remove the cover.2Locate the battery pack À.3Insert the battery pack, observing polarity.4Gently press the battery pack into place.5Replace the battery cover, and turn the D-ring clockwise.Introduction 1DRAFT
Charging the Battery PackNOTICETo prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or connecting to a computer.Do not attempt to use the device to charge a battery that was not provided by Garmin®. Attempting to charge a battery that was not provided by Garmin can damage the device and void the warranty.Before you can connect the straight connector of the USB cable to your device, you may need to remove optional mount accessories.NOTE: The device does not charge when outside the approved temperature range (Specifications, page 12).You can charge the battery using a standard wall outlet or a USB port on your computer.1Pull up the weather cap À from the mini-USB port Á.2Plug the small end of the USB cable into the mini-USB port.3Plug the USB end of the cable into an AC adapter or a computer USB port.4If necessary, plug the AC adapter into a standard wall outlet.When you connect the device to a power source, the device turns on.5Charge the battery completely.Installing AA BatteriesInstead of the optional NiMH battery pack (Installing the NiMH Battery Pack, page 1), you can use two alkaline, NiMH, or lithium batteries. This is useful when you are on the trail and cannot charge the NiMH battery pack. Use NiMH or lithium batteries for best results.NOTE: Standard alkaline batteries are not recommended for the 64sc models when using the camera feature.1Turn the D-ring counter-clockwise, and pull up to remove the cover.2Insert two AA batteries, observing polarity.3Replace the battery cover, and turn the D-ring clockwise.4Hold  .5Select Setup > System > AA Battery Type.6Select Alkaline, Lithium, Traditional NiMH, or Precharged NiMH.Turning On the DeviceHold  .KeysFIND Select to open the search menu.MARK Select to save your current location as a waypoint.QUIT Select to cancel or return to the previous menu or page.Select to scroll through the main pages.ENTER Select to select options and acknowledge messages.MENU Select to open the options menu for the page that is currently open.Select twice to open the main menu (from any page).PAGE Select to scroll through the main pages.Select  ,  ,  , or   to select menu options and move the map cursor.IN Select to zoom in on the map.OUT Select to zoom out on the map.Acquiring Satellite SignalsIt may take 30 to 60 seconds to acquire satellite signals.1Go outdoors to an open area.2If necessary, turn on the device.3Wait while the device searches for satellites.A question mark flashes while the device determines your location.4Select   to open the status page. shows the GPS/GLONASS signal strength.When the bars are green, the device has acquired satellite signals.Using the Main PagesThe information needed to operate this device is found on the main menu, map, compass, trip computer, and elevation plot pages.Select PAGE to choose the active main page.Opening the Main MenuThe main menu gives you access to setup screens including waypoints, tracks, and routes. See Main Menu Features and Settings, page 5 for main menu settings pages.From any page, select MENU twice.Map represents your location on the map. As you travel,   moves and leaves a track log (trail). Waypoint names and symbols appear on the map. When you are navigating to a destination, your route is marked with a colored line on the map.Changing the Map Orientation1From the map, select MENU.2Select Setup Map > Orientation.2 Using the Main PagesDRAFT
3Select an option:• Select North Up to show north at the top of the page.• Select Track Up to show your current direction of travel atthe top of the page.• Select Automotive Mode to show an automotiveperspective with the direction of travel at the top.Measuring Distance on the MapYou can measure the distance between two locations.1From the map, select a location.2Select MENU > Measure Distance.3Move the pin to another location on the map.Map SettingsSelect Setup > Map.Orientation: Adjusts how the map is shown on the page. North Up shows north at the top of the page. Track Up shows a top-down view with your current direction of travel toward the top of the page. Automotive Mode shows an 3D automotive view with the direction of travel at the top.Guidance Text: Sets when the guidance text appears on the map.Data Fields: Customizes the data fields and dashboards of the map, compass, elevation plot, and trip computer.Map Information: Enables or disables the maps currently loaded on the device.Advanced Map SettingsSelect Setup > Map > Advanced Map Setup.Auto Zoom: Automatically selects the appropriate zoom level for optimal use on your map. When Off is selected, you must zoom in or out manually.Zoom Levels: Adjusts the zoom level at which map items will appear. The map items will not appear when the map zoom level is higher than the selected level.Text Size: Selects the text size for map items.Detail: Selects the amount of detail shown on the map. Showing more detail may cause the map to redraw more slowly.Shaded Relief: Shows detail relief on the map (if available) or turns off shading.CompassWhen navigating,   points to your destination, regardless of the direction you are moving. When   points toward the top of the electronic compass, you are traveling directly toward your destination. If   points any other direction, turn until it points toward the top of the compass.Calibrating the CompassBefore you can calibrate the electronic compass, you must be outdoors, away from objects that influence magnetic fields, such as cars, buildings, or overhead power lines.The device has a 3-axis electronic compass (AA2401 series devices only). You should calibrate the compass after moving long distances, experiencing temperature changes, or changing the batteries.1 From the compass, select MENU.2 Select Calibrate Compass > Start.3 Follow the on-screen instructions.Using the CompassYou can use the compass to navigate an active route.1 Select PAGE.2 Hold the device level.3 Follow  to your destination.Course PointerThe course pointer is most useful when you are navigating on water or where there are no major obstacles in your path. It can also help you avoid hazards near the course, such as shoals or submerged rocks.To enable the course pointer, from the compass, select MENU > Setup Heading > Go To Line/Pointer > Course (CDI).The course pointer À indicates your relationship to the course line leading to the destination. The course deviation indicator (CDI) Á provides the indication of drift (right or left) from thecourse. The scale  refers to the distance between dots à onthe course deviation indicator, which tell you how far off courseyou are.Navigating with Sight 'N GoYou can point the device at an object in the distance, lock in the direction, and navigate to the object.NOTE: Sight 'N Go is available only with AA2401 series devices.1Select Sight 'N Go.2Point the device at an object.3Select Lock Direction > Set Course.4Navigate using the compass.Heading SettingsYou can customize the compass settings.Select Setup > Heading.Display: Sets the type of directional heading shown on the compass.North Reference: Sets the north reference used on the compass.Go To Line/Pointer: Sets the behavior of the pointer that appears on the map. Bearing points in the direction of your destination. Course shows your relationship to the course line leading to the destination.Compass: Automatically switches from an electronic compass to a GPS compass when you are traveling at a higher rate of speed for a period of time.Calibrate Compass: See Calibrating the Compass, page 3.Trip ComputerThe trip computer displays your current speed, average speed, maximum speed, trip odometer, and other helpful statistics. You can customize the trip computer layout, dashboard, and data fields.Trip Computer SettingsFrom the trip computer, select MENU.Reset: Resets all the trip computer values to zero. For accurate information, reset the trip information before beginning a trip.Big Numbers: Changes the size of the numbers shown on the trip computer page.Change Data Fields: Customizes the trip computer data fields.Change Dashboard: Changes the theme and information displayed on the dashboard.Using the Main Pages 3DRAFT
NOTE: Your customized settings are remembered by the dashboard. Your settings are not lost when you change profiles (Profiles, page 11).Restore Defaults: Restores the trip computer to factory default settings.Elevation PlotNOTE: The elevation plot is available only with AA2401 series devices.By default, the elevation plot displays the elevation over the distance traveled. You can customize elevation plot settings (Elevation Plot Settings, page 4). You can select any point on the plot to view details about that point.Elevation Plot SettingsFrom the elevation plot, select MENU.Change Plot Type: Sets the type of data shown on the elevation plot.Elevation/Time: Records elevation changes over a period of time.Elevation/Distance: Records elevation changes over a distance.Barometric Pressure: Records barometric pressure changes over a period of time.Ambient Pressure: Records ambient pressure changes over a period of time.Adjust Zoom Ranges: Adjusts the zoom ranges shown on the elevation plot page.Change Data Fields: Customizes the elevation plot data fields.Reset: Resets the elevation plot data, including waypoint, track, and trip data.Calibrate Altimeter: See (Calibrating the Barometric Altimeter, page 4).Restore Defaults: Restores the elevation plot to factory default settings.Calibrating the Barometric AltimeterYou can manually calibrate the barometric altimeter if you know the correct elevation or the correct barometric pressure.NOTE: The barometric altimeter is available only with AA2401 series devices.1Go to a location where the elevation or barometric pressure is known.2Select PAGE > Elevation Plot > MENU > Calibrate Altimeter.3Follow the on-screen instructions.Restoring Default Page Settings1Open a page for which you will restore the settings.2Select MENU > Restore Defaults.Waypoints, Routes, and TracksWaypointsWaypoints are locations you record and store in the device. Waypoints can mark where you are, where you are going, or where you have been. You can add details about the location, such as name, elevation, and depth.You can add a .gpx file that contains waypoints by transferring the file to the GPX folder (Transferring Files to Your Device, page 12).Creating a WaypointYou can save your current location as a waypoint.1Select MARK.2If necessary, select a field to make changes to the waypoint.3Select Done.Projecting a WaypointYou can create a new location by projecting the distance and bearing from a marked location to a new location.1Select Waypoint Manager.2Select a waypoint.3Select MENU > Project Waypoint.4Enter the bearing, and select Done.5Select a unit of measure.6Enter the distance, and select Done.7Select Save.Navigating to a Waypoint1Select FIND > Waypoints.2Select a waypoint.3Select Go.Editing a Waypoint1Select Waypoint Manager.2Select a waypoint.3Select an item to edit, such as the name.4Enter the new information, and select Go.Deleting a Waypoint1Select Waypoint Manager.2Select a waypoint.3Select MENU > Delete.RoutesA route is a sequence of waypoints or locations that leads you to your final destination.Creating a Route1Select Route Planner > Create Route > Select First Point.2Select a category.3Select the first point in the route.4Select Use.5Select Select Next Point to add additional points to the route.6Select QUIT to save the route.Editing the Name of a Route1Select Route Planner.2Select a route.3Select Change Name.4Enter the new name.Editing a Route1Select Route Planner.2Select a route.3Select Edit Route.4Select a point.5Select an option:• To view the point on the map, select Review.• To change the order of the points on the route, selectMove Up or Move Down.• To insert an additional point on the route, select Insert.The additional point is inserted before the point you areediting.4 Waypoints, Routes, and TracksDRAFT
• To remove the point from the route, select Remove.6Select QUIT to save the route.Viewing a Route on the Map1Select Route Planner.2Select a route.3Select View Map.Deleting a Route1Select Route Planner.2Select a route.3Select Delete Route.Navigating a Saved Route1Select FIND > Routes.2Select a route.3Select Go.Viewing the Active Route1While navigating a route, select Active Route.2Select a point in the route to view additional details.Stopping NavigationSelect FIND > Stop Navigation.Reversing a RouteYou can switch the start and end points of your route to navigate the route in reverse.1Select Route Planner.2Select a route.3Select Reverse Route.TracksA track is a recording of your path. The track log contains information about points along the recorded path, including time, location, and elevation for each point.Tracks SettingsSelect Setup > Tracks.Track Log: Turns track recording on or off.Record Method: Sets a track recording method. Auto records the tracks at a variable rate to create an optimum representation of your tracks.Recording Interval: Sets a track log recording rate. Recording points more frequently creates a more-detailed track, but fills the track log faster.Auto Archive: Sets an automatic archive method to organize your tracks. Tracks are saved and cleared automatically.Color: Changes the color of the track line on the map.Viewing the Current Track1Select Track Manager > Current Track.2Select an option:• To show the current track on the map, select View Map.• To show the elevation plot for the current track, selectElevation Plot.Saving the Current Track1Select Track Manager > Current Track.2Select an option:• Select Save Track to save the entire track.• Select Save Portion, and select a portion.Clearing the Current TrackSelect Track Manager > Current Track > Clear Current Track.Deleting a Track1Select Track Manager.2Select a track.3Select Delete.Navigating a Saved Track1Select FIND > Tracks.2Select a saved track.3Select Go.Purchasing Additional Maps1Go to your device product page at www.garmin.com.2Click the Maps tab.3Follow the on-screen instructions.Finding an AddressYou can use optional City Navigator® maps to search for addresses.1Select FIND > Addresses.2Select the country or state, if necessary.3Enter the city or postal code.NOTE: Not all map data provides postal code searching.4Select the city.5Enter the house number.6Enter the street.Main Menu Features and SettingsCamera and PhotosNOTE: This feature is available only for models that include a camera.When you take a photo, the geographic location is saved with the photo information. You can navigate to the location.Taking a Photo1Select Camera.2Turn the device horizontally or vertically to change the orientation of the photo.3If necessary, select MENU > Flash to turn on the flash.TIP: You can select Auto to use the flash only when the camera detects a low light scene.4If necessary, select IN or OUT to zoom in or out.5Hold ENTER to focus, and hold the device still.A white frame appears on the screen. The device focuses on the object inside of the frame. When the photo is in focus, the frame turns green.6Release ENTER to take a photo.TIP: You can view photos by selecting   > ENTER.Viewing PhotosYou can view photos you took with the camera and photos you transferred to the device.1Select Photo Viewer.2Select a photo.3If necessary, select IN or OUT to zoom in or out.Sorting Photos1Select Photo Viewer > MENU > Sort Photos.2Select an option:• Select Most Recently.• Select Near A Location, and select a location.• Select On A Specific Date, and enter a date.Main Menu Features and Settings 5DRAFT
Viewing the Location of a Photo1Select Photo Viewer.2Select a photo.3Select MENU > View Map.Navigating to a Photo1Select Photo Viewer.2Select a photo.3Select MENU > View Information > Go.Deleting a Photo1Select Photo Viewer.2Select a photo.3Select MENU > Delete > Yes.Using the FlashlightYou may need to add the flashlight feature to the main menu (Customizing the Main Menu, page 10).NOTE: This feature is available only for models that include a camera.NOTE: Using the flashlight can reduce battery life. You can reduce the brightness or flash frequency to extend the life of the batteries.1Select Flashlight >  .2If necessary, use the brightness slider to adjust the brightness.3If necessary, select a different flash type.0 No strobe, constant beam.1 through 9 Number of strobes per second.SOS Emergency strobe.GeocachesGeocaching is a treasure hunting activity in which players hide or search for hidden caches using clues and GPS coordinates.Downloading Geocaches Using a ComputerYou can load geocaches manually onto your device using a computer (Transferring Files to Your Device, page 12). You can place the geocache files into a GPX file and import them into the GPX folder on the device. With a premium membership to geocaching.com, you can use the "pocket query" feature to load a large group of geocaches onto your device as a single GPX file.1Connect the device to your computer using a USB cable.2Go to www.geocaching.com.3If necessary, create an account.4Sign in.5Follow the instructions at geocaching.com to find and download geocaches to your device.Navigating to a Geocache1Select Geocaches.2Select a geocache.3Select Go.Logging the AttemptAfter you have attempted to find a geocache, you can log your results. You can verify some geocaches at www.opencaching.com.1Select Geocaches > Log Attempt.2Select Found, Did not Find, Needs Repair, or Unattempted.3Select an option:• To stop logging, select Done.• To begin navigation to the geocache nearest you, selectFind Next Closest.• To enter a comment about looking for the cache or aboutthe cache itself, select Add Comment, enter a comment,and select Done.• To rate the geocache, select Rate Geocache, and enter arating for each category. You can go towww.opencaching.com to upload your rating.chirp™A chirp is a small Garmin accessory that is programmed and left in a geocache. You can use your device to find a chirp in a geocache. For more information about the chirp, see the chirp Owner's Manual at www.garmin.com.Enabling chirp Searching1Select Setup > Geocaches.2Select chirp™ Setup > chirp™ Searching > On.Sending and Receiving Data WirelesslyNOTE: This feature is available only with AA2401 series devices.Before you can share data wirelessly, you must be within 3 m (10 ft.) of a compatible device.Your device can send and receive data when paired with another compatible device or smartphone using Bluetooth® or ANT+® wireless technology. You can share waypoints, geocaches, routes, tracks, photos, and custom maps.1Select Share Wirelessly.2Select an option:• Select Send, and select a type of data.• Select Receive to receive data from another device. Theother compatible device must be attempting to send data.3Follow the on-screen instructions.Setting a Proximity AlarmProximity alarms alert you when you are within a specified range of a particular location.1Select Proximity Alarms > Create Alarm.2Select a category.3Select a location.4Select Use.5Enter a radius.When you enter an area with a proximity alarm, the device sounds a tone.Selecting a ProfileWhen you change activities, you can change the setup of the device by changing the profile.1Select Profile Change.2Select a profile.Area CalculationCalculating the Size of an Area1Select Area Calculation > Start.2Walk around the perimeter of the area you want to calculate.3Select Calculate when finished.Satellite PageThe satellite page shows your current location, GPS accuracy, satellite locations, and signal strength.6 Main Menu Features and SettingsDRAFT
GPS Satellite SettingsSelect Satellite > MENU.NOTE: Some settings are only available when Use Demo Mode is enabled.Use Demo Mode: Allows you to turn the GPS off.Use Satellite System: Allows you to turn the GPS on.Track Up: Indicates whether satellites are shown with rings oriented with north toward the top of the screen or oriented with your current track toward the top of the screen.Single Color: Allows you to select whether the satellite page is displayed in multicolor or single color.Set Location On Map: Allows you to mark your current location on the map. You can use this location to create routes or search for saved locations.AutoLocate Position: Calculates your GPS position using the Garmin AutoLocate® feature.Garmin AdventuresYou can create adventures to share your journeys with family, friends, and the Garmin community. You can group related items together as an adventure. For example, you can create an adventure for your latest hiking trip. The adventure could contain the track log of the trip, photos of the trip, and geocaches you hunted. You can use BaseCamp™ to create and manage your adventures. For more information, go to adventures.garmin.com.Sending Files to BaseCamp1Open BaseCamp.2Connect the device to your computer.On Windows® computers, the device appears as a removable drive or a portable device, and the memory card may appear as a second removable drive. On Mac® computers, the device and memory card appear as mounted volumes.NOTE: Some computers with multiple network drives may not display device drives properly. See your operating system documentation to learn how to map the drive.3Open the Garmin or memory card drive or volume.4Select an option:• Select an item from a connected device and drag it to MyCollection or to a list.• From BaseCamp, select Device > Receive from Device,and select the device.Creating an AdventureBefore you can create an adventure and send it to your device, you must download BaseCamp to your computer and transfer a track from your device to your computer (Sending Files to BaseCamp, page 7).1Open BaseCamp.2Select File > New > Garmin Adventure.3Select a track, and select Next.4If necessary, add items from BaseCamp.5Complete the required fields to name and describe the adventure.6If you want to change the cover photo for the adventure, select Change, and select a different photo.7Select Finish.Starting an AdventureBefore you can start an adventure, you must send an adventure from BaseCamp to your device (Sending Files to BaseCamp, page 7).1Select Adventures.2Select an adventure.3 Select Start.VIRB® RemoteNOTE: The VIRB Remote feature is available only with AA2401 series devices.Before you can use the VIRB Remote function, you must enable the remote setting on your VIRB camera.The VIRB Remote function allows you to control your VIRB camera from a distance.1 Select VIRB Remote.2 Select an option:• Select REC to record video.• Select Take Photo to take a photograph.Waypoint AveragingYou can refine a waypoint location for more accuracy. When averaging, the device takes several readings at the same location and uses the average value to provide more accuracy.1Select Waypoint Manager.2Select a waypoint.3Select MENU > Average Location.4Move to the waypoint location.5Select Start.6Follow the on-screen instructions.7When the confidence status bar reaches 100%, select Save.For best results, collect four to eight samples for the waypoint, waiting at least 90 minutes between samples.Bluetooth Connected FeaturesYour AA2401 series device has several Bluetooth connected features for your compatible smartphone. Some features require you to install Garmin Connect™ Mobile on your smartphone. Go to www.garmin.com/apps for more information.Phone notifications: Displays phone notifications and messages on your AA2401 series device.LiveTrack: Allows friends and family to follow your activities in real time. You can invite followers using email or social media, allowing them to view your live data on a Garmin Connect tracking page.Activity uploads to Garmin Connect: Automatically sends your activity to Garmin Connect as soon as you finish recording the activity.Pairing a Smartphone with Your DeviceNOTE: This feature is compatible only with AA2401 series devices.1 Bring your compatible smartphone within 10 m (33 ft.) of your device.2 From the main menu on your device, select Setup > Bluetooth > Pair Mobile Device.3 On your compatible smartphone, enable Bluetooth wireless technology, and search for your AA2401 series device.A passkey appears on your device screen.4 On your compatible smartphone, enter the passkey.Phone NotificationsNOTE: This feature is not available for all device models.Phone notifications require a compatible smartphone to be paired with the device. When your phone receives messages, it sends notifications to your device.Viewing Phone NotificationsBefore you can view notifications, you must pair your device with your compatible smartphone.Main Menu Features and Settings 7DRAFT
1Select   > MENU.2Select a notification.Hiding NotificationsBy default, notifications appear on the device screen when they are received. You can hide notifications to prevent them from appearing.Select Setup > Bluetooth > Notifications > Hide.Additional Main Menu ToolsSelect MENU.Alarm Clock: Sets an audible alarm. If you are not currently using the device, you can set the device to turn on at a specific time.Calculator: Displays a calculator.Calendar: Displays a calendar.Hunt and Fish: Displays the predicted best dates and times for hunting and fishing at your current location.Stopwatch: Allows you to use a timer, mark a lap, and time laps.Sun and Moon: Displays sunrise and sunset times, along with the moon phase, based on your GPS position.Customizing the DeviceCustomizing the Data FieldsYou can customize the data fields displayed on each main page.1Open the page for which you will change the data fields.2Select MENU.3Select Change Data Fields.4Select the new data field.5Follow the on-screen instructions.Data FieldsSome data fields require you to be navigating or require ANT+ accessories to display data.24hr Max Temperature: The maximum temperature recorded in the last 24 hours. Your device must be connected to a wireless temperature sensor for this data to appear.24hr Min Temperature: The minimum temperature recorded in the last 24 hours. Your device must be connected to a wireless temperature sensor for this data to appear.Accuracy Of GPS: The margin of error for your exact location. For example, your GPS location is accurate to within +/- 12 ft. (3.65 m).Alarm Timer: The current time of the countdown timer.Ambient Pressure: The uncalibrated environmental pressure.Ascent - Average: The average vertical distance of ascent since the last reset.Ascent - Maximum: The maximum rate of ascent in feet per minute or meters per minute since the last reset.Ascent - Total: The total elevation distance ascended since the last reset.Average Lap: The average lap time for the current activity.Barometer: The calibrated current pressure.Battery Level: The remaining battery power.Bearing: The direction from your current location to a destination. You must be navigating for this data to appear.Cadence: The number of revolutions of the crank arm or number of strides per minute. Your device must be connected to a cadence accessory for this data to appear.Compass Heading: The direction you are moving based on the compass.Course: The direction from your starting location to a destination. Course can be viewed as a planned or set route. You must be navigating for this data to appear.Current Lap: The stopwatch time for the current lap.Date: The current day, month, and year.Depth: The depth of the water. Your device must be connected to a NMEA® 0183 or NMEA 2000® device capable of acquiring the water depth.Descent - Average: The average vertical distance of descent since the last reset.Descent - Maximum: The maximum rate of descent in feet per minute or meters per minute since the last reset.Descent - Total: The total elevation distance descended since the last reset.Distance To Destination: The remaining distance to the final destination. You must be navigating for this data to appear.Distance To Next: The remaining distance to the next waypoint on the route. You must be navigating for this data to appear.Elevation: The altitude of your current location above or below sea level.Elevation Above Ground: The altitude of your current location above ground level (if maps contain sufficient elevation information).Elevation - Maximum: The highest elevation reached since the last reset.Elevation - Minimum: The lowest elevation reached since the last reset.ETA At Destination: The estimated time of day when you will reach the final destination (adjusted to the local time of the destination). You must be navigating for this data to appear.ETA At Next: The estimated time of day when you will reach the next waypoint on the route (adjusted to the local time of the waypoint). You must be navigating for this data to appear.Glide Ratio: The ratio of horizontal distance traveled to the change in vertical distance.Glide Ratio To Dest: The glide ratio required to descend from your current position to the destination elevation. You must be navigating for this data to appear.GPS Elevation: The altitude of your current location using GPS.GPS Heading: The direction you are moving based on GPS.GPS Signal Strength: The strength of the GPS satellite signal.Grade: The calculation of rise (elevation) over run (distance). For example, if for every 10 ft. (3 m) you climb you travel 200 ft. (60 m), the grade is 5%.Heading: The direction you are moving.Heart Rate: Your heart rate in beats per minute (bpm). Your device must be connected to a compatible heart rate monitor.Lap Distance: The distance traveled for the current lap.Laps: The number of laps completed for the current activity.Last Lap Time: The stopwatch time for the last completed lap.Location (lat/lon): The current position in latitude and longitude regardless of the selected position format setting.Location (selected): The current position using the selected position format setting.Location of Destination: The position of your final destination. You must be navigating for this data to appear.Odometer: A running tally of distance traveled for all trips. This total does not clear when resetting the trip data.8 Customizing the DeviceDRAFT
Off Course: The distance to the left or right by which you have strayed from the original path of travel. You must be navigating for this data to appear.Pointer: An arrow points in the direction of the next waypoint or turn. You must be navigating for this data to appear.Speed: The current rate of travel.Speed Limit: The reported speed limit for the road. Not available in all maps and in all areas. Always rely on posted road signs for actual speed limits.Speed - Maximum: The highest speed reached since the last reset.Speed - Moving Avg.: The average speed while moving since the last reset.Speed - Overall Avg.: The average speed while moving and stopped since the last reset.Stopwatch Timer: The stopwatch time for the current activity.Sunrise: The time of sunrise based on your GPS position.Sunset: The time of sunset based on your GPS position.Temperature: The temperature of the air. Your body temperature affects the temperature sensor. Your device must be connected to a wireless temperature sensor for this data to appear.Temperature - Water: The temperature of the water. Your device must be connected to a NMEA 0183 device capable of acquiring the water temperature.Time of Day: The current time of day based on your current location and time settings (format, time zone, daylight saving time).Time To Destination: The estimated time remaining before you reach the destination. You must be navigating for this data to appear.Time To Next: The estimated time remaining before you reach the next waypoint in the route. You must be navigating for this data to appear.To Course: The direction in which you must move to get back on the route. You must be navigating for this data to appear.Total Lap: The stopwatch time for all the completed laps.Track Distance: The distance traveled for the current track.Trip Odometer: A running tally of the distance traveled since the last reset.Trip Time: A running tally of the total time spent moving and not moving since the last reset.Trip Time - Moving: A running tally of the time spent moving since the last reset.Trip Time - Stopped: A running tally of the time spent not moving since the last reset.Turn: The angle of difference (in degrees) between the bearing to your destination and your current course. L means turn left. R means turn right. You must be navigating for this data to appear.Velocity Made Good: The speed at which you are closing on a destination along a route. You must be navigating for this data to appear.Vertical Dist to Dest: The elevation distance between your current position and the final destination. You must be navigating for this data to appear.Vertical Speed: The rate of ascent or descent over time.Vertical Speed To Dest: The rate of ascent or descent to a predetermined altitude. You must be navigating for this data to appear.Waypoint At Dest: The last point on the route to the destination. You must be navigating for this data to appear.Waypoint At Next: The next point on the route. You must be navigating for this data to appear.System SettingsSelect Setup > System.Satellite System: Sets the satellite system to GPS, GPS + GLONASS, or Demo Mode (GPS off).WAAS/EGNOS: Enables the system to use Wide Area Augmentation System/European Geostationary Navigation Overlay Service (WAAS/EGNOS) data.Language: Sets the text language on the device.NOTE: Changing the text language does not change the language of user-entered data or map data, such as street names.Interface: Sets the format of the serial interface (Serial Interface Settings, page 9).AA Battery Type: Allows you to change the type of AA battery you are using.NOTE: This setting is disabled when the NiMH battery pack is installed.GPS and GLONASSThe default satellite system setting is GPS + GLONASS, which offers increased performance in challenging environments and faster position acquisition. Using GPS and GLONASS can reduce battery life more quickly than using GPS only.Serial Interface SettingsSelect Setup > System > Interface.Garmin Spanner: Allows you to use the device USB port with most NMEA 0183-compliant mapping programs by creating a virtual serial port.Garmin Serial: Sets the device to use a Garmin proprietary format to exchange waypoint, route, and track data with a computer.NMEA In/Out: Sets the device to use standard NMEA 0183 output and input.Text Out: Provides simple ASCII text output of location and velocity information.RTCM: Allows the device to accept Differential Global Positioning System (DGPS) information from a device supplying Radio Technical Commission for Maritime Services (RTCM) data in an SC-104 format.Display SettingsSelect Setup > Display.Backlight Timeout: Adjusts the length of time before the backlight turns off.Battery Save: Saves the battery power and prolongs the battery life by turning off the screen when the backlight times out.Colors: Changes the appearance of the display background and selection highlight.Main, Setup, Find Style: Changes the style of the menu system.Screen Capture: Allows you to save the image on the device screen.Adjusting the Backlight BrightnessExtensive use of screen backlighting can significantly reduce battery life. You can adjust the backlight brightness to maximize the battery life.NOTE: The backlight brightness may be limited when the battery is low.1Select  .2Use the slider to adjust the backlight level.Customizing the Device 9DRAFT
The device may feel warm when the backlight setting is high.Setting the Device TonesYou can customize tones for messages, keys, turn warnings, and alarms.1Select Setup > Tones > Tones > On.2Select a tone for each audible type.Camera SettingsSelect Setup > Camera.Photo Resolution: Sets the resolution of the photos.Save Photos To: Sets the photo storage location.Review Instructions: Displays brief instructions about taking photos.Marine SettingsSelect Setup > Marine.Marine Chart Mode: Sets the type of chart the device uses when displaying marine data. Nautical displays various map features in different colors so the marine POIs are more readable and so the map reflects the drawing scheme of paper charts. Fishing (requires marine maps) displays a detailed view of bottom contours and depth soundings and simplifies map presentation for optimal use while fishing.Appearance: Sets the appearance of marine navigation aids on the map.Marine Alarm Setup: Sets alarms for when you exceed a specified drift distance while anchored, when you are off course by a specified distance, and when you enter water of a specific depth.Setting Up Marine Alarms1Select Setup > Marine > Marine Alarm Setup.2Select an alarm type.3Select On.4Enter a distance, and select Go.Resetting DataYou can reset trip data, delete all waypoints, clear the current track, or restore default values.1Select Setup > Reset.2Select an item to reset.Changing the Page Sequence1Select Setup > Page Sequence.2Select a page.3Select Move.4Move the page up or down in the list.5Select ENTER.TIP: You can select PAGE to view the page sequence.Adding a Page1Select Setup > Page Sequence.2Select Add Page.3Select a page to add.Removing a Page1Select Setup > Page Sequence.2Select a page.3Select Remove.4Select ENTER.Customizing the Main MenuYou can move, add, and delete items in the main menu.1From the main menu, select MENU > Change Item Order.2Select a menu item.3Select an option:• Select Move to change the placement of the item in thelist.• Select Insert to add a new item to the list.• Select Remove to delete an item from the list.Changing the Units of MeasureYou can customize units of measure for distance and speed, elevation, depth, temperature, pressure, and vertical speed.1Select Setup > Units.2Select a measurement type.3Select a unit of measure.Time SettingsSelect Setup > Time Settings.Time Format: Sets the device to show time in a 12-hour or 24-hour format.Time Zone: Sets the time zone for the device. Automatic sets the time zone automatically based on your GPS position.Position Format SettingsNOTE: You should not change the position format or the map datum coordinate system unless you are using a map or chart that specifies a different position format.Select Setup > Position Format.Position Format: Sets the position format in which a location reading appears.Map Datum: Sets the coordinate system on which the map is structured.Map Spheroid: Shows the coordinate system the device is using. The default coordinate system is WGS 84.10 Customizing the DeviceDRAFT
Altimeter SettingsNOTE: The altimeter is available only with AA2401 series devices.Select Setup > Altimeter.Auto Calibration: Automatically calibrates the altimeter each time the device is turned on.Barometer Mode: Variable Elevation allows the barometer to measure changes in elevation while you are moving. Fixed Elevation assumes the device is stationary at a fixed elevation, so the barometric pressure should only change due to weather.Pressure Trending: Sets how the device records pressure data. Save Always records all pressure data, which can be helpful when you are watching for pressure fronts.Plot Type: Records elevation changes over a period of time or distance, records barometric pressure over a period of time, or records ambient pressure changes over a period of time.Calibrate Altimeter: Calibrates the altimeter.Routing SettingsThe device calculates routes optimized for the type of activity you are doing. The available routing settings vary based on the activity selected.Select Setup > Routing.Activity: Sets an activity for routing. The device calculates routes optimized for the type of activity you are doing.Route Transitions: Sets how the device routes from one point on the route to the next. This setting is available only for some activities. Distance routes you to the next point on the route when you are within a specified distance of your current point.Lock On Road: Locks the blue triangle, which represents your position on the map, onto the nearest road.ProfilesProfiles are a collection of settings that optimize your device based on how you are using it. For example, the settings and views are different when you use the device for hunting than when geocaching.When you are using a profile and you change settings, such as data fields or units of measurement, the changes are saved automatically as part of the profile.Creating a Custom ProfileYou can customize your settings and data fields for a particular activity or trip.1Select Setup > Profiles > Create Profile > OK.2Customize your settings and data fields.Editing a Profile Name1Select Setup > Profiles.2Select a profile.3Select Edit Name.4Enter the new name.Deleting a ProfileNOTE: Before you can delete the active profile, you must activate a different profile. You cannot delete a profile while it is active.1Select Setup > Profiles.2Select a profile.3Select Delete.Device InformationSupport and UpdatesGarmin Express™ (www.garmin.com/express) provides easy access to these services for Garmin devices.• Product registration• Product manuals• Software updates• Data uploads to Garmin Connect• Map, chart, or course updatesSetting Up Garmin Express1Connect the device to your computer using a USB cable.2Go to www.garmin.com/express.3Follow the on-screen instructions.Registering Your DeviceHelp us better support you by completing our online registration today.• Go to www.garmin.com/express.• Keep the original sales receipt, or a photocopy, in a safeplace.Attaching the Carabiner Clip1Position the carabiner clip À in the slots on the mounting spine Á of the device.2Slide the carabiner clip up until it locks in place.Removing the Carabiner ClipLift up on the bottom of the carabiner clip, and slide the carabiner clip off the mounting spine.Attaching the Wrist Strap1Insert the loop of the wrist strap through the slot in the device.2Thread the other end of the strap through the loop, and pull it tight.Device Information 11DRAFT
Device CareNOTICEAvoid chemical cleaners, solvents, and insect repellents that can damage plastic components and finishes.Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause permanent damage.The device is water resistant to IEC Standard 60529 IPX7. It can withstand accidental immersion in 1 meter of water for 30 minutes. Prolonged submersion can cause damage to the device. After submersion, be certain to wipe dry and air dry the device before using or charging.Cleaning the DeviceNOTICEEven small amounts of sweat or moisture can cause corrosion of the electrical contacts when connected to a charger. Corrosion can prevent charging and data transfer.1Wipe the device using a cloth dampened with a mild detergent solution.2Wipe it dry.After cleaning, allow the device to dry completely.Data ManagementNOTE: The device is not compatible with Windows 95, 98, Me, Windows NT®, and Mac OS 10.3 and earlier.File TypesThe handheld device supports these file types.• Files from BaseCamp or HomePort™. Go to www.garmin.com/trip_planning.• GPX track files.• GPX geocache files. Go to www.garmin.com/geocache.• GGZ geocache files. Go to www.garmin.com/geocache.• JPEG photo files.• GPI custom POI files from the Garmin POI Loader. Go towww.garmin.com/products/poiloader.Installing a Memory Card WARNINGDo not use a sharp object to remove user-replaceable batteries.You can install a microSD memory card in the handheld device for additional storage or pre-loaded maps.1Turn the D-ring counter-clockwise, and pull up to remove the cover.2Remove the battery.3Slide the card holder À to   and lift up.4Place the memory card with the gold contacts facing down.5Close the card holder.6Slide the card holder to   to lock it.7Replace the battery and cover.Connecting the Device to Your ComputerNOTICETo prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or connecting to a computer.Before you can operate your device while connected to your computer, you must install batteries. The computer USB port may not provide enough power to operate the device.1Pull up the weather cap from the mini-USB port.2Plug the small end of the USB cable into the mini-USB port.3Plug the large end of the USB cable into a computer USB port.On Windows computers, the device appears as a removable drive or a portable device, and the memory card may appear as a second removable drive. On Mac computers, the device and memory card appear as mounted volumes.Transferring Files to Your Device1Connect the device to your computer.On Windows computers, the device appears as a removable drive or a portable device, and the memory card may appear as a second removable drive. On Mac computers, the device and memory card appear as mounted volumes.NOTE: Some computers with multiple network drives may not display device drives properly. See your operating system documentation to learn how to map the drive.2On your computer, open the file browser.3Select a file.4Select Edit > Copy.5Open the portable device, drive, or volume for the device or memory card.6Browse to a folder.7Select Edit > Paste.The file appears in the list of files in the device memory or on the memory card.Deleting FilesNOTICEIf you do not know the purpose of a file, do not delete it. Your device memory contains important system files that should not be deleted.1Open the Garmin drive or volume.2If necessary, open a folder or volume.3Select a file.4Press the Delete key on your keyboard.Disconnecting the USB CableIf your device is connected to your computer as a removable drive or volume, you must safely disconnect your device from your computer to avoid data loss. If your device is connected to your Windows computer as a portable device, it is not necessary to safely disconnect.1Complete an action:• For Windows computers, select the Safely RemoveHardware icon in the system tray, and select your device.• For Mac computers, drag the volume icon to the trash.2Disconnect the cable from your computer.SpecificationsBattery type NiMH battery pack or two AA batteries (1.5 V or lower alkaline, NiMH, or lithium)Battery life Up to 16 hr.Water rating IEC 60529 IPX7*12 Device InformationDRAFT
Operating temperature rangeFrom -20° to 45°C (from -4° to 113°F)Charging temperature rangeFrom 0° to 40°C (from 32° to 104°F)Radio frequency and protocols2.4 GHz ANT+; Bluetooth 4.0 (includes EDR and BLE)Compass-safe distance 17.5 cm (7 in.)*The device withstands incidental exposure to water of up to 1 mfor up to 30 min. For more information, go to www.garmin.com/waterrating.AppendixContacting Garmin Product Support• Go to www.garmin.com/support for in-country supportinformation.• In the USA, call 913-397-8200 or 1-800-800-1020.• In the UK, call 0808 238 0000.• In Europe, call +44 (0) 870 850 1241.Turning On the BacklightSelect   to turn on the backlight.The backlight turns on automatically when you select a button, and when alerts and messages are displayed.Optional AccessoriesOptional accessories, such as mounts, maps, fitness accessories, and replacement parts, are available at http://buy.garmin.com or from your Garmin dealer.tempe™The tempe is an ANT+ wireless temperature sensor. You can attach the sensor to a secure strap or loop where it is exposed to ambient air, and therefore, provides a consistent source of accurate temperature data. You must pair the tempe with your device to display temperature data from the tempe.Using Optional Fitness Accessories1Bring the device within 10 ft. (3 m) of the ANT+ accessory.2Select Setup > Fitness.3Select Heart Rate Monitor or Bike Cadence Sensor.4Select Search For New.5Customize the data fields to view the heart rate or cadence data (Customizing the Data Fields, page 8).Tips for Pairing ANT+ Accessories with Your Garmin Device• Verify that the ANT+ accessory is compatible with yourGarmin device.• Before you pair the ANT+ accessory with your Garmindevice, move 10 m (32.9 ft.) away from other ANT+accessories.• Bring the Garmin device within range 3 m (10 ft.) of the ANT+accessory.• After you pair the first time, your Garmin device automaticallyrecognizes the ANT+ accessory each time it is activated. Thisprocess occurs automatically when you turn on the Garmindevice and only takes a few seconds when the accessoriesare activated and functioning correctly.• When paired, your Garmin device receives data from onlyyour accessory, and you can go near other accessories.TroubleshootingResetting the DeviceIf the device stops responding, you may need to reset it. This does not erase any of your data or settings.1Remove the batteries.2Reinstall the batteries.Viewing Device InformationYou can view the unit ID, software version, regulatory information, and license agreement.Select Setup > About.Restoring All Default SettingsYou can reset all settings back to the factory default settings.Select Setup > Reset > Reset All Settings > Yes.Appendix 13DRAFT
IndexAaccessories 13addresses, finding 5adventures 7alarmsclock 8marine 10proximity 6altimeter 11calibrating 4ANT+ sensors, pairing 13applications 7area calculation 6Bbacklight 1, 9, 13BaseCamp 7, 9, 12battery 1, 12charging 2installing 1, 2life 3maximizing 1, 9storage 1Bluetooth technology 7Ccalculator 8calendar 8calibrating, altimeter 4camera 5settings 10carabiner clip 11charging 2chirp 6City Navigator 5cleaning the device 12compass 3calibrating 3settings 3computer, connecting 12courses, pointer 3customizing the device 8, 10Ddashboards 3data, transferring 12data fields 8deleting, all user data 12deviceregistration 11resetting 13downloading, geocaches 6Eelevation 4Ffiles, transferring 6, 12flashlight 6GGarmin Connect 7Garmin Express 11registering the device 11updating software 11geocaches 6, 12downloading 6GLONASS 9GPS 6, 9satellite page 7settings 9HHomePort 12hunting and fishing times 8Kkeys 1, 2Llocationsediting 4saving 4Mmain menu 2customizing 10maps 5measuring distances 3navigating 2orientation 2, 3purchasing 5settings 3updating 11zoom 3marinealarms setup 10settings 10measuring distances 3memory card 12microSD card. See memory cardNnavigating 3navigation 3stopping 5notifications 7, 8PpairingANT+ sensors 13smartphone 7photos 5, 6taking 5viewing 5, 6position format 10power key 2product registration 11profiles 6, 11proximity alarms 6Rregistering the device 11resetting the device 10, 13restoring, settings 13routes 4, 5creating 4deleting 5editing 4navigating 5settings 11viewing on the map 5Ssatellite page 7satellite signals 6acquiring 2screen, settings 9settings 3, 5, 9–11, 13device 11sharing data 6Sight N' Go 3smartphone 6applications 7pairing 7softwarelicense 13updating 11version 13specifications 12stopwatch 8storing data 12sunrise and sunset times 8system settings 9Ttempe 13temperature 13time settings 10time zones 10tones 10tracks 5, 7navigating 5settings 5transferringfiles 6, 7, 12tracks 6trip computer 3trip information, viewing 3trip planner. See routestroubleshooting 10, 13Uunit ID 13units of measure 10USB 9connector 1disconnecting 12mass storage mode 12transferring files 12user data, deleting 12VVIRB Remote 7WWAAS 9waypoints 4deleting 4editing 4, 7navigating 4projecting 4saving 4wrist strap 1114 IndexDRAFT
DRAFT
www.garmin.com/support1800 235 822 +43 (0) 820 220230+ 32 2 672 52 54 0800 770 49601-866-429-9296 +385 1 5508 272+385 1 5508 271+420 221 985466+420 221 985465 + 45 4810 5050+ 358 9 6937 9758 + 331 55 69 33 99+ 39 02 36 699699 (+52) 001-855-792-76710800 427 652 0800 0233937+47 815 69 555 00800 4412 454+44 2380 662 915+35 1214 447 460 +386 4 27 92 5000861 GARMIN (427 646)+27 (0)11 251 9800 +34 93 275 44 97+ 46 7744 52020 +886 2 2642-9199 ext 20808 238 0000+44 870 850 1242+49 (0) 89 858364880zum Ortstarif - Mobilfunk kann abweichen913-397-82001-800-800-1020October 2016190-01702-00_0CDRAFT

Navigation menu