Garmin 02767 Low Power Transmitter (2400-2483.5 MHz) User Manual

Garmin International Inc Low Power Transmitter (2400-2483.5 MHz)

Contents

User Manual

Quick Start Manual.................................. 2Manuel de démarrage rapide.................. 8Manuale di avvio rapido........................ 15Schnellstartanleitung............................. 22Guía de inicio rápido............................. 30Manual de Início Rápido....................... 37DRAFT
Quick Start ManualIntroduction WARNINGRead all instructions carefully before installingand using the  system. Improper usecould result in serious injury.See the Important Safety and ProductInformation guide in the product box for productwarnings and other important information.NOTICEGo to www.garmin.com/ for thelatest information including compatibility,software updates, and video tutorials.Tools Included• 15mm crowfoot adapter for torque wrench• 2.5 mm hex keyTools Needed• 15 mm pedal wrench• Bike grease•3 mm hex key• 4 mm hex keyInstalling ComponentsPreparing1Confirm the compatibility at www.garmin.com/.2Remove the existing parts.3Clean the threads, and remove old grease.2 Quick Start ManualDRAFT
NOTICEParing with Your Edge®Before you can view data on the Edgedevice, you must pair the devices.Pairing is the connecting of ANT+® wirelesssensors. This procedure contains instructionsfor the Edge. If you have anothercompatible device, see your owner's manual, orgo to www.garmin.com/.1Bring the Edge device within range (3 m) ofthe sensor.NOTE: Stay 10 m away from other ANT+sensors while pairing.2Turn on the Edge device.3From the home screen, select   >Sensors > Add Sensor > Power.4    Activate the device a few times.When the sensor is paired with your Edgedevice, the sensor status is Connected. YouQuick Start Manual 5DRAFT
can customize a data field to display data.Status LEDMultiple LED flashes indicate a system statusthat requires your attention. The red LEDindicates the battery is low.LED Activity Status1 green flash every30 seconds.The system isworking properly.2 flashes every 10seconds.The device is notconnected.3 flashes every 10seconds.The device isconnected, but it cannotcommunicate with theEdge device.4 flashes every 10seconds.The device issearching for the otherdevice.NOTE: For informationabout upgrading, see theowner's manual.5 flashes every 10seconds.The installation angle isnot set or cannot bedetected.6 flashes every 10seconds.There is a hardwareinstallation error.1 red flash every 30seconds.The battery islow.6 Quick Start ManualDRAFT
TroubleshootingGetting the Owner's ManualYou can get the latest owner's manual from theweb.1Go to www.garmin.com/support.2Select Manuals.3Follow the on-screen instructions to selectyour product.StorageIf you are transporting your device or not usingfor an extended period of time, Garminrecommends removing and storing it inthe product box.DRAFT
Garmin®, the Garmin logo, ANT+®, and Edge® aretrademarks of Garmin Ltd. or its subsidiaries, registered inthe USA and other countries. These trademarks may notbe used without the express permission of Garmin.This product is ANT+® certified. Visit www.thisisant.com/directory for a list of compatible products and apps.The FCC ID is located inthe battery compartment.FCC ID: IPH-02767  M/N: A02767El número de registro COFETEL/IFETEL puede serrevisado en el manual a través de la siguiente página deinternet.© 2015 Garmin Ltd. or its subsidiarieswww.garmin.com/supportPrinted in TaiwanJanuary 2015 190-01867-91_01DRAFT

Navigation menu