Garmin 02104 NEAR FIELD COMMUNICATIONS LOW POWER TRANSMITTER User Manual

Garmin International Inc NEAR FIELD COMMUNICATIONS LOW POWER TRANSMITTER

UserManual.wiki >

02104 User Manual >

Contents

User Manual 1

Monterra™Quick Start ManualMay 2013 190-01601-01_0A Printed in TaiwanDRAFT

Introduction WARNINGSee the Important Safety and ProductInformation guide in the product box forproduct warnings and other importantinformation.Device OverviewCameraMicrophonePower keyLED flashVolume keysBattery cover D-ringWaterproof speakerHeadphone port (under weather cap)Mini-USB port (under weather cap)Battery Information WARNINGThe temperature rating for the device mayexceed the usable range of somebatteries. Alkaline batteries can rupture athigh temperatures.Do not use a sharp object to removebatteries. CAUTIONContact your local waste disposaldepartment to properly recycle thebatteries.NOTICEAlkaline batteries lose a significantamount of their capacity as thetemperature decreases. Therefore, uselithium batteries when operating thedevice in below freezing conditions.2DRAFT

Installing the Battery Pack WARNINGThis product contains a lithium-ionbattery. To prevent the possibility ofpersonal injury or product damage causedby battery exposure to extreme heat,store the device out of direct sunlight.1Turn the D-ring counter-clockwise,and pull up to remove the cover.2Locate the metal contacts on the endof the lithium-ion battery.3Insert the battery into thecompartment, contacts first.4Press the battery into place.5Replace the battery cover, and turnthe D-ring clockwise.Charging the Battery Pack WARNINGThis product contains a lithium-ionbattery. To prevent the possibility ofpersonal injury or product damage causedby battery exposure to extreme heat,store the device out of direct sunlight.NOTICETo prevent corrosion, thoroughly dry themini-USB port, the weather cap, and thesurrounding area before charging orconnecting to a computer.Do not attempt to use the device tocharge a battery that was not provided byGarmin®. Attempting to charge a batterythat was not provided by Garmin candamage the device and void the warranty.Before you can connect the straightconnector of the USB cable to yourdevice, you may have to remove optionalmount accessories.NOTE: The battery will not charge whenoutside the temperature range of 32 to122°F (0 to 50°C).3DRAFT

You can charge the battery using astandard wall outlet or a USB port on yourcomputer.1Pull up the weather cap  from themini-USB port .2Plug the small end of the USB cableinto the mini-USB port.3Plug the USB end of the cable into theAC adapter or a computer USB port.4Plug the AC adapter into a standardwall outlet.When you connect the device to apower source, the device turns on.5Charge the battery completely.Removing the Battery Pack WARNINGDo not use a sharp object to removebatteries.1Turn the D-ring counter-clockwise,and pull up to remove the cover.2Pull up on the side of the battery packclosest to the power button.Installing AA BatteriesInstead of the battery pack (page 3), youcan use alkaline, NiMH, or lithium AAbatteries. This is useful when you are onthe trail and cannot charge the batterypack. Use NiMH or lithium batteries forbest results.NOTE: Standard alkaline batteries are notrecommended when using the camerafeature.1Turn the D-ring counter-clockwise,and pull up to remove the cover.2Insert three AA batteries, observingpolarity.4DRAFT

3Replace the battery cover, and turnthe D-ring clockwise.Turning On the DeviceSelect .Setting Up the DeviceThe first time you turn on the device, youmust set up basic device settings. Youcan also set up accounts.1Turn on the device.2Follow the on-screen instructions.Using the Touchscreen• Drag or swipe your finger across thescreen to pan or scroll the screen.• Pinch two fingers together to zoomout.• Spread two fingers to zoom in.• Make each touchscreen selection aseparate action.• Select to return to the previouspage.• Select to return to the homescreen.• Select to view additional options forthe page you are viewing.Home ScreenSwipe down to view notifications.Enter text to start a search.Swipe left and right to switch pages.Hold to customize shortcuts, widgets, orwallpaper.5DRAFT

Hold to drag shortcuts in or out of thedock.Touch to view all installed apps.Viewing Notifications1Swipe down from the top of thescreen.The list of notifications appears.2Select an option:• To launch the action or appmentioned in the notification,select the notification.• To dismiss a notification, swipe thenotification to the right.Enabling GPSFor more information about GPS, go to www.garmin.com/aboutGPS.Select Settings > Location services> GPS satellites.Connecting to a Wireless Network1Select Settings > Wi-Fi.2If necessary, select the toggle switchto turn on Wi-Fi.3If necessary, select Scan to scan foravailable networks.4Select a wireless network.5If necessary, enter the encryption key.The device connects to the wirelessnetwork. The device remembers thenetwork information and connectsautomatically when you return to thislocation in the future.Updating the Device SoftwareBefore you can update the devicesoftware, you must be connected to awireless network.The device checks for software updatesperiodically when it is connected to awireless network. A notification appearswhen a software update is available. Youcan also check for updates manually.1Select an option:• When a software updatenotification appears, swipe downfrom the top of the screen, andselect New software updateavailable.• To check for an update manually,select Settings > About Monterra> System updates.6DRAFT

The device checks for availableupdates. This may take severalminutes.2Select Download, and follow the on-screen instructions.Locking and Unlocking theTouchscreenYou can lock the screen to preventinadvertent screen touches.1Hold the power key.2Select Touch Lock to toggle thescreen lock on or off.WaypointsWaypoints are locations you record andstore in the device.Creating a WaypointYou can save your current location as awaypoint.1Select Mark Waypoint.2If necessary, select Edit to change thename or other waypoint data.3Select Save.TracksA track is a recording of your path. Thetrack log contains information aboutpoints along the recorded path, includingtime, location, and elevation for eachpoint.Pausing Track Recording1Swipe down from the top of thescreen.The list of notifications appears.2Select next to Track RecordingOn.Customizing Your Track LogYou can customize how your devicedisplays and records tracks.1Select Settings > Tracks.2Select Record to toggle track loggingon or off.3Select Show on Map to toggle thetrack log on the map on or off.When this feature is enabled, a line onthe map indicates your track.4Select Color, and select a color forthe track log on the map.7DRAFT

5Select Record Method.6Select an option:•To record tracks at a variable ratethat creates an optimumrepresentation of your tracks,select Auto.•To record tracks at a specifieddistance, select Distance.• To record tracks at a specifiedtime, select Time.7Select Interval.8Complete an action:• If you selected Auto for theRecord Method, select an optionto record tracks more or less often.NOTE: Using the Most Ofteninterval provides the most trackdetail, but fills up the devicememory quicker.• If you selected Distance or Timefor the Record Method, enter avalue, and select OK.Navigating to a Destination1Select Where To?.2Select a category.3Select a destination.4Select Go.The map opens with your routemarked with a magenta line.5Navigate using the map (page 8) orcompass (page 9).Navigating with the Map1Begin navigating to a destination(page 8).2Select Map.A blue triangle represents yourlocation on the map. As you travel, theblue triangle moves and leaves a tracklog (trail). You can change how thetrack log appears on the map(page 7).3Complete one or more actions:• Drag the map to view differentareas.• Select and to zoom in andout of the map.• Select a location on the map(represented by a pin), and selectthe information bar at the top of8DRAFT

the screen to view informationabout the selected location.Navigating with the CompassWhen navigating to a destination, pointsto your destination, regardless of thedirection you are moving.1Begin navigating to a destination(page 8).2Select Compass.3Turn until points toward the top ofthe compass, and continue moving inthat direction to the destination.Following Your Track LogWhile navigating, you can navigate backto the beginning of your track log. Thiscan be helpful when finding your wayback to camp or the trail head.1Select Track Manager > CurrentTrack > View Map > TracBack.The map displays your route with amagenta line, start point, and endpoint.2Navigate using the map or thecompass.Stopping NavigationFrom the map or compass, select >Stop Navigation.Camera and PhotosYou can take photos and videos with yourdevice. If enabled, the geographiclocation is automatically saved in thephoto or video information. You cannavigate to the location.Taking a Photo1Select Camera.2Turn the device horizontally orvertically to change the orientation ofthe photo.3If necessary, select one or moreoptions to customize the photo:• To change shooting options,including flash, exposure, whitebalance, scene, or locationinformation, select .• To zoom in or out, use the slider.• To change the focus, select a partof the image.The device focuses on the areainside of the square brackets.9DRAFT

Navigation menu