Garmin 01999 LOW POWER TRANSMITTER User Manual

Garmin International Inc LOW POWER TRANSMITTER

User Manual

quatix™Owner’s ManualFebruary 2013 190-01594-00_0A Printed in Taiwan
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.Garmin®, the Garmin logo, and TracBack® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. ANT+™, HomePort™, quatix™, GNT™, and tempe™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. Mac® is a registered trademark of Apple Computer, Inc. Windows® is a registered trademark of Microsoft Corporation in the United States and other countries. Other trademarks and trade names are those of their respective owners.
Table of ContentsGetting Started............................................................... 1Keys........................................................................................... 1Charging the Device.................................................................. 1Profiles....................................................................................... 1Changing Profiles.................................................................. 1Creating a Custom Profile..................................................... 1Deleting a Profile................................................................... 1Sensors and GPS Data.............................................................. 2Viewing the Data Pages........................................................ 2Turning On a Sensor Mode................................................... 2Compass............................................................................... 2Altimeter and Barometer............................................................ 2Changing the Plot Type......................................................... 2Calibrating the Barometric Altimeter..................................... 2Acquiring Satellites.................................................................... 2Stopping GPS....................................................................... 2Navigation.......................................................................2Navigating to a Destination........................................................ 2Stopping Navigation.............................................................. 3Waypoints.................................................................................. 3Creating a Waypoint.............................................................. 3Finding a Waypoint by Name................................................ 3Navigating to a Waypoint...................................................... 3Editing a Waypoint................................................................ 3Increasing the Accuracy of a Waypoint Location.................. 3Projecting a Waypoint........................................................... 3Deleting a Waypoint.............................................................. 3Deleting All Waypoints.......................................................... 3Routes........................................................................................ 4Creating a Route................................................................... 4Editing the Name of a Route................................................. 4Editing a Route...................................................................... 4Viewing a Route on the Map................................................. 4Deleting a Route................................................................... 4Reversing a Route................................................................ 4Tracks........................................................................................ 4Acquiring Satellite Signals and Recording a Track............... 4Saving the Current Track...................................................... 4Viewing Details about the Track............................................ 4Clearing the Current Track.................................................... 4Deleting a Track.................................................................... 4Sending Data to HomePort™................................................ 4Sending and Receiving Data Wirelessly............................... 4Map............................................................................................ 5Browsing the Map................................................................. 5Navigating Using TracBack®..................................................... 5Marking and Starting Navigation to a Man Overboard Location..................................................................................... 5Applications................................................................... 5Sail Racing................................................................................. 5Setting the Race Timer......................................................... 5Sail Racing with the Race Timer........................................... 5Setting the Race Start Line................................................... 5Sail Racing Using the Start Line........................................... 5Tack Assist................................................................................. 6Calibrating the Tack Assist.................................................... 7Calibrating the Tack Assist Manually.................................... 7Viewing Tide Information........................................................... 7Pairing With an Autopilot............................................................ 7Using Autopilot...................................................................... 7Clock.......................................................................................... 8Setting the Alarm................................................................... 8Starting the Countdown Timer.............................................. 8Using the Stopwatch............................................................. 8Adding a Custom Time Zone................................................ 8Editing a Custom Time Zone................................................. 8Alerts.......................................................................................... 8Setting a Proximity Alarm...................................................... 8Navigating with Sight 'N Go....................................................... 8Calculating the Size of an Area.................................................. 8Viewing the Almanacs................................................................ 8Viewing Satellite Information...................................................... 9Simulating a Location............................................................ 9ANT+™ Sensors............................................................. 9Pairing ANT+ Sensors............................................................... 9Streaming NMEA 2000 Data...................................................... 9Using Automatic Man Overboard............................................... 9tempe......................................................................................... 9Putting On the Heart Rate Monitor............................................. 9Customizing Your Device............................................10Setup Overview........................................................................ 10System Settings....................................................................... 10Customizing the Data Pages................................................... 10Compass Settings.................................................................... 10Setting the North Reference................................................ 10Altimeter Settings..................................................................... 10Setting the Device Tones......................................................... 10Display Settings....................................................................... 10Map Settings............................................................................ 11Track Settings.......................................................................... 11Time Settings........................................................................... 11Changing the Units of Measure............................................... 11Position Format Settings.......................................................... 11Customizing the Main Menu.................................................... 11Device Information.......................................................11Viewing Device Information..................................................... 11Updating the Software............................................................. 11Device Care............................................................................. 11Cleaning the Device............................................................ 11Specifications........................................................................... 11Battery Information................................................................... 11Data Management................................................................... 12File Types............................................................................ 12Deleting Files...................................................................... 12Disconnecting the USB Cable............................................. 12Data Fields............................................................................... 12NMEA 2000 Data Fields...................................................... 13Data Pages.............................................................................. 13Troubleshooting....................................................................... 14Locking the Keys................................................................. 14Resetting Your Device........................................................ 14Resetting the Device to Factory Settings............................ 14Clearing All Sensor Plot Data.............................................. 14Appendix.......................................................................14Registering Your Device.......................................................... 14Software License Agreement................................................... 14Index..............................................................................15Table of Contents i
Getting StartedWhen using your device the first time, you should complete these tasks to set up the device and get to know the basic features.1Charge the device (page 1).2Learn about profiles and sensor data (page 2).3Acquire satellites and record your track (page 2).4Mark and navigate to a waypoint (page 3).5Learn about applications (page 5).6Stream data from your NMEA 2000® network (page 9).7Register the device (page 14).KeysÀSelect to turn the backlight on and off. Hold to turn the device on and off.ÁSelect to scroll through the data pages, options, and settings.ÂSelect to scroll through the data pages, options, and settings.ÃSelect to return to the previous screen. Hold to view the status page.ÄBlue key Select to open the menu for the current screen. Select to choose an option and to acknowledge a message. Hold to mark a waypoint.Charging the DeviceNOTICETo prevent corrosion, thoroughly dry the contacts and the surrounding area before charging or connecting to a computer.The device is powered by a built-in lithium-ion battery that you can charge using a standard wall outlet or a USB port on your computer.1Plug the USB end of the cable into the AC adapter or a computer USB port.2Plug the AC adapter into a standard wall outlet.3Align the left side of the charging cradle À with the groove on the left side of the device.4Align the hinged side of the charger Á with the contacts on the back of the device.When you connect the device to a power source, the device turns on.5Charge the device completely.ProfilesProfiles are a collection of settings that optimize your device based on how you are using it. For example, the settings and views are different when you are using the device when sailing than when powerboating.When you are using a profile and you change settings such as data fields or units of measurement, the changes are saved automatically as part of the profile.Changing ProfilesWhen you change activities, you can quickly change the setup of the device to suit the activity by changing the profile.1Select the blue key.2Select Profiles.3Select a profile.The profile you selected is now the active profile. Any changes you make are saved to the active profile.Creating a Custom ProfileYou can customize your settings and data fields for a particular activity or trip.1Select the blue key.2Select Setup > Profiles.3Select an option:• Select a profile.• Select Create New, and select the new profile.The profile you selected is now the active profile. The previous profile was saved.4If necessary, select Edit, and edit the name of the profile.5Customize your settings (page 10) and data fields for the active profile.Any changes you make are saved to the active profile.Deleting a Profile1Select the blue key.2Select Setup > Profiles.3Select a profile.4Select Delete > Yes.Getting Started 1
Sensors and GPS DataViewing the Data PagesCustomizable data pages allow you to quickly access real-time data for the compass, barometer, and temperature sensors. When you begin tracking or navigating, additional data pages appear.Data pages can also show data streamed from your NMEA 2000 network through a Garmin® GNT™.From the time of day page, select or to cycle through the data pages.NOTE: Sensor data is not recorded to the device.Data Page FlowsBy default, the time, compass, barometer, and temperature pages appear in all data page flows. The organization and appearance of other data pages depends on these conditions.• The active profile• Whether you are tracking, navigating, or only viewing sensor data• Whether you are streaming NMEA 2000 data through a Garmin GNTThe data fields on each page can be customized. Some data fields are available only when streaming NMEA 2000 data. See page 13 for more information.Turning On a Sensor ModeThe default sensor mode is on demand mode, which offers you quick access to compass, altimeter, barometer, or temperature data. You can also put the device in always on mode to display continuous sensor data.1Select the blue key.2Select Setup > Sensors > Mode > Always On.CompassThe device has a 3-axis compass with automatic calibration.• Compass navigation (page 3)• Compass settings (page 10)Calibrating the CompassNOTICECalibrate the electronic compass outdoors. To improve heading accuracy, do not stand near objects that influence magnetic fields, such as vehicles, buildings, and overhead power lines.Your device was already calibrated at the factory, and the device uses automatic calibration by default. If you experience irregular compass behavior, for example, after moving long distances or after extreme temperature changes, you can manually calibrate the compass.1Select the blue key.2Select Setup > Sensors > Compass > Calibrate > Start.3Follow the on-screen instructions.Altimeter and BarometerThe device contains an internal altimeter and barometer.•On Demand sensor data (page 2)•Always On sensor data (page 2)• Altimeter settings (page 10)Changing the Plot TypeYou can change the way the device plots barometer and elevation data.1Select the blue key.2Select Setup > Sensors > Altimeter.3Select Baro. Plot or Elev. Plot.4Select an option.Calibrating the Barometric AltimeterYour device was already calibrated at the factory, and the device uses automatic calibration by default. You can manually calibrate the barometric altimeter if you know the correct elevation or the correct barometric pressure.1Select the blue key.2Select Setup > Sensors > Altimeter > Calibrate.3Follow the on-screen instructions.Acquiring SatellitesBefore you can use the GPS navigation features, such as recording a track, you must acquire satellite signals.The device may need a clear view of the sky to acquire satellite signals. The time and date are set automatically based on the GPS position. To adjust the time settings, see page 8.For more information about GPS, go to www.garmin.com/aboutGPS.1Select the blue key.2Select Start GPS.3Wait while the device locates satellites.Stopping GPS1Select the blue key.2Select Stop GPS.NavigationYou can navigate to a route, track, waypoint, geocache, or any saved location in the device. You can use the map or the compass to navigate to your destination.Navigating to a DestinationYou can navigate to a destination using the compass or map (page 5).1Select the blue key.2Select Start GPS.3Wait while the device locates satellites.4Select the blue key.5Select an option:• Select Waypoints.• Select Tracks.• Select Routes.• Select GPS Tools > Coordinates.• Select GPS Tools > POIs.6Select a destination.7Select Go.The device displays time to destination À, distance to destination Á, and estimated time of arrival Â.8Select to view the compass page.2 Navigation
The two pointer marks à serve as a bearing pointer. The top orange mark Ä points in the direction you are facing.9Align the pointer marks with the top orange mark.10Continue to walk in that direction until you reach the destination.Stopping Navigation1Select the blue key.2Select Stop Nav..WaypointsWaypoints are locations you record and store in the device.Creating a WaypointYou can save your current location as a waypoint.1Hold the blue key.2Select an option:• To save the waypoint without changes, select Save.• To make changes to the waypoint, select Edit, make changes to the waypoint, and select Save.Finding a Waypoint by Name1Select the blue key.2Select Waypoints > Spell Search.3Use the blue key, , and to enter characters.4When finished, select _ > Done.Navigating to a Waypoint1Select the blue key.2Select Start GPS.3Wait while the device locates satellites.4Select the blue key.5Select Waypoints, and select a waypoint from the list.6Select Go.The device displays time to destination À, distance to destination Á, and estimated time of arrival Â.7Select to view the compass page.The two pointer marks à serve as a bearing pointer. The top blue mark Ä points in the direction you are facing.8Align the pointer marks with the top blue mark.9Continue to travel in that direction until you reach the destination.Editing a WaypointBefore you can edit a waypoint, you must create a waypoint.1Select the blue key.2Select Waypoints.3Select a waypoint.4Select Edit.5Select an item to edit, such as the name.6Use the blue key, , and to enter characters.7When finished, select _ > Done.Increasing the Accuracy of a Waypoint LocationYou can refine a waypoint location for more accuracy. When averaging, the device takes several readings at the same location and uses the average value to provide more accuracy.1Select the blue key.2Select Waypoints.3Select a waypoint.4Select Average.5Move to the waypoint location.6Select Start.7Follow the on-screen instructions.8When the confidence reaches 100%, select Save.For best results, collect four to eight samples for the waypoint, waiting at least 90 minutes between samples.Projecting a WaypointYou can create a new location by projecting the distance and bearing from a marked location to a new location.1Select the blue key.2Select Waypoints.3Select a waypoint.4Select Project.5Follow the on-screen instructions.The projected waypoint is saved with a default name.Deleting a Waypoint1Select the blue key.2Select Waypoints.3Select a waypoint.4Select Delete > Yes.Deleting All Waypoints1Select the blue key.2Select Setup > Reset > Waypoints > Yes.Navigation 3
RoutesA route is a sequence of waypoints or locations that leads you to your final destination.Creating a Route1Select the blue key.2Select Routes > Create New.3Select First Point.4Select a category.5Select the first point on the route.6Select Next Point.7Repeat steps 4–6 until the route is complete.8Select Done to save the route.Editing the Name of a Route1Select the blue key.2Select Routes.3Select a route.4Select Rename.5Use the Orange key, , and to enter characters.6When finished, select _ > Done.Editing a Route1Select the blue key.2Select Routes.3Select a route.4Select Edit.5Select a point.6Select an option:• To view the point on the map, select Map.• To change the order of the point on the route, select Move Up or Move Down.• To insert an additional point on the route, select Insert.The additional point is inserted before the point you are editing.• To add a point to the end of the route, select Next Point.• To remove the point from the route, select Remove.Viewing a Route on the Map1Select the blue key.2Select Routes.3Select a route.4Select View Map.Deleting a Route1Select the blue key.2Select Routes.3Select a route.4Select Delete > Yes.Reversing a Route1Select the blue key.2Select Routes.3Select a route.4Select Reverse.TracksA track is a recording of your path. The track log contains information about points along the recorded path, including time, location, and elevation for each point.Acquiring Satellite Signals and Recording a TrackBefore you can use the GPS navigation features, such as recording a track, you must acquire satellite signals.The device may need a clear view of the sky to acquire satellite signals. The time and date are set automatically based on the GPS position.1Select the blue key.2Select Start GPS.3Wait while the device locates satellites.4Travel to record a track.Your distance and time appear.5Select to view the loop of data pages.6Hold .7Select an option:• Select Pause Track to pause tracking.• Select Save Track to save your track.• Select Clear Track to erase the track without saving.• Select Stop GPS to turn off GPS without deleting your track.Saving the Current Track1Select the blue key.2Select Tracks > Current.3Select an option:• To save the entire track, select Save.• To save part of the track, select Save Part, and select the part to save.Viewing Details about the Track1Select the blue key.2Select Tracks.3Select a track.4Select View Map.The beginning and the end of the track are marked by flags.5Select > Details.6Use and to view information about the track.Clearing the Current Track1Select the blue key.2Select Tracks > Current > Clear.Deleting a Track1Select the blue key.2Select Tracks.3Select a track.4Select Delete > Yes.Sending Data to HomePort™Before you can send data to HomePort, you must purchase HomePort and install it on your computer (www.garmin.com/homeport).You can view tracks and waypoints on your computer.1Connect your device to your computer using the USB cable.Your device appears as a removable drive in My Computer on Windows® computers and as a mounted volume on Mac® computers.2Start HomePort.3Follow the on-screen instructions.Sending and Receiving Data WirelesslyBefore you can share data wirelessly, you must be within 10 feet (3 m) of a compatible Garmin device.4 Navigation
Your device can send or receive data when connected to another compatible device. You can share waypoints, geocaches, routes, and tracks wirelessly.1Select the blue key.2Select Share Data > Unit to Unit.3Select Send or Receive.4Follow the on-screen instructions.Sending Data to BlueChart® MobileBefore you can share data with the BlueChart Mobile application, you must install it on your mobile device (www.garmin.com/bluechartmobile).You can view tracks and waypoints on your mobile device.1On your quatix, select the blue key.2Select Share Data > BlueChart Mob..3Start BlueChart Mobile on your mobile device.4Follow the on-screen instructions.See the BlueChart Mobile help for more information.Map represents your location on the map. As you travel, the icon moves and leaves a track log (trail). Waypoint names and symbols appear on the map. When you are navigating to a destination, your route is marked with a line on the map.• Map navigation (page 5)• Map settings (page 11)Browsing the Map1While navigating, select to view the map.2Select the blue key.3Select one or more options:• Select Pan, and select , , , and to view different areas.• Select Zoom, and select and to zoom in and out of the map.Navigating Using TracBack®While navigating, you can navigate back to the beginning of your track. This can be helpful when finding your way back to camp or the trail head.1Select the blue key.2Select Tracks > Current > TracBack.Your current location À, track to follow Á, and end point  appear on the map.Marking and Starting Navigation to a Man Overboard LocationYou can save a man overboard (MOB) location, and automatically start navigation back to it.1Hold , and select OK.The navigation page opens.2Navigate using the compass or map.ApplicationsSail RacingYou can use the quatix to increase the likelihood that your boat will cross the start line of a race exactly when the race begins. When you synchronize the race timer with the official race countdown timer, the quatix alerts you at one-minute intervals as the race start approaches. When you combine the race timer with the virtual start line, the quatix measures your speed, bearing, and remaining time on the countdown timer. The quatix uses this data to indicate whether your boat will cross the start line before, after, or at the correct time to start the race.Setting the Race Timer1Select the blue key.2Select Sail Race > Setup > Race Timer.3Use the blue key, , and to set the time.Sail Racing with the Race TimerBefore you can use the race timer to start a race, you must select the sailing profile and set the race timer.1Select the blue key.2Select Sail Race > Race.3Select and to synchronize the race timer with the official race countdown, and select the blue key to start the timer.TIP: If necessary, after you start the timer you can select and to add or subtract time from the race timer.Setting the Race Start LineYou can define a race start line using two waypoints or the waypoint of one end of the start line and the bearing to the other end of the line.1Select the blue key.2Select Sail Race > Setup > Start Line.3Select an option:• To set your present location as the location of the first point of the start line, select Mark Point > Mark.• To use a previously saved waypoint as the location of the first point of the start line, select Select, and select a waypoint.4Select an option:• To set your present location as the location of the second point of the start line, select Waypoints > Mark Point > Mark.• To use a previously saved waypoint as the location of the second point of the start line, select Waypoints > Select, and select a point.• To set the bearing of the start line from the location of the first waypoint, select Bearing, and enter the bearing.Sail Racing Using the Start LineBefore you can use the device to start a race, you must select the sailing profile and set the start line.1Select the blue key.2Select Sail Race > Race.Applications 5
The race timer screen displays the race timer À, time to burn Á, and distance to the start line Â.3Select and to synchronize the race timer with the official race countdown, and select the blue key to start the timer.TIP: If the burn time is negative, you will arrive at the start line after the race starts, and should modify your course or speed accordingly. If the burn time is positive, you will arrive at the start line before the race starts, and should modify your course or speed accordingly.TIP: If necessary, after you start the timer you can select and to add or subtract time from the race timer.Tack AssistWhile cruising or racing into the wind, the quatix tack assist feature can help you determine the ideal heading and when it is time to tack. When you calibrate tack assist, the quatix stores your boat's ideal port À and starboard Á tack angles and the average true wind direction Â. It uses this data to determine whether your boat is being positively lifted or negatively lifted due to changes in the wind direction.When your boat experiences positive lift, the wind direction À has shifted so that your actual heading Á brings you closer to your destination  than your intended heading à would have. The quatix displays the degree to which your actual heading varies from your expected heading Ä and your speed over ground Å. The bezel marks Æ provide a quick reference that corresponds to your lift angle.When your heading indicates a consistent positive lift trend, you should re-calibrate the true wind direction or the angle for the current tack. Re-calibration ensures the tack assist provides accurate information.When your boat experiences negative lift, the wind direction À has shifted so that your actual heading Á pushes you farther from your destination  than your intended heading à would have. The quatix displays the degree to which your actual heading varies from your expected heading Ä and your speed over ground Å. The bezel marks Æ provide a quick reference that corresponds to your lift angle.6 Applications
When your heading indicates a consistent negative lift trend, you should change tack, then re-calibrate the true wind direction or the angle for the current tack. Re-calibration ensures the tack assist provides accurate information.NOTE: The quatix uses GPS-based speed over ground to determine your heading, and does not account for other factors that can affect your boat's direction, such as currents and tides.Calibrating the Tack AssistBefore you start a race, you must calibrate the optimal tack angle for your boat.1Select the blue key.2Select Tack Assist > Full Cal..3Follow the on-screen instructions.Calibrating the Tack Assist ManuallyDuring a race, you may need to adjust tack assist settings individually to adapt to changing conditions.1Select the blue key.2Select Tack Assist.3Select an option:• To recalibrate the port or starboard tack, hold a steady course along the intended port or starboard tack, and select Recal..NOTE: When you recalibrate the port or starboard tack, the opposite tack is reset to maintain a consistent tack angle.• To change the tack angle, select Tack Angle, and select an angle.NOTE: When you change the tack angle, the port and starboard tacks are equally increased or decreased.• To change the true wind direction, select True Wind D, and select the direction.Viewing Tide InformationYou can view information about a tide station, including the tide height and when the next high and low tides will occur.1Select the blue key.2Select Tides > Search Near.3Select an option:• To search near a previously saved waypoint, select Waypoints, and select or search for a waypoint.• To search near a specific city, select Cities, and select or search for a city.A list of the tide stations near the selected location appears.4Select a station.A 24-hour tide chart appears for the current date, showing the current tide height À and when the next high Á and low tides  will occur.5Select an option:• To view more detailed information about the next four tide peaks and troughs, select .• To pan the tide chart, select the blue key, and select Pan Chart.• To view tide information for a different date, select the blue key, select Change Date, and select the date.Pairing With an AutopilotRefer to the GHC™ owner's manual for more information about using the GHC.1Select the blue key.2Select Autopilot > Yes.3Set the GHC to search for a remote.When the devices are paired, the autopilot screen appears on the quatix.Using AutopilotBefore you can use the quatix to control an autopilot, you must install and configure a compatible Garmin GHP™ autopilot system and pair your quatix with the GHC device. For more information, see the owner's manual for your autopilot.1Select the blue key.2Select Autopilot.3Select an option:• To engage the autopilot heading hold, hold a steady course, select Engage, and release the helm.Applications 7
• To change the heading in 1° increments, with the autopilot engaged, select for port and for starboard.• To perform a step turn, with the autopilot engaged, hold for port and for starboard.• To activate a preset action, select Presets, and select a button action. The map displays a plot of the action performed by the button.• To take the helm, select Standby.ClockSetting the Alarm1Select the blue key.2Select Clock > Alarm Clock > Add Alarm.3Use the blue key, , and to set the time.4Select Tone, Vibration, or Tone & Vib..5Select Once, Daily, or Weekdays.Starting the Countdown Timer1Select the blue key.2Select Clock > Timer.3Use the blue key, , and to set the time.4If necessary, select Notification, and select an option.5Select Start.Using the Stopwatch1Select the blue key.2Select Clock > Stopwatch.3Select Start.Adding a Custom Time Zone1Select the blue key.2Select Clock > Alt. Zones > Add Zone.3Select a time zone.The custom time zone page is added to the quick page loop (page 2).Editing a Custom Time Zone1Select the blue key.2Select Clock > Alt. Zones.3Select a time zone.4Select an option:• To change the time zone, select Edit Zone.• To customize the name of the time zone, select Edit Label.• To delete the time zone from the quick page loop, select Delete > Yes.AlertsYou can set the device to alert you in many different situations where your awareness of the surrounding conditions or other data is important. There are three types of alerts: event alerts, range alerts, and recurring alerts.Event alert: An event alert notifies you once. The event is a specific value. For example, you can set the device to alert you when you reach a specified elevation.Range alert: A range alert notifies you every time the device is above or below a specified range of values. For example, you can set the device to alert you when your speed is below 5 knots and over 15 knots.Recurring alert: A recurring alert notifies you every time the device records a specified value or interval. For example, you can set the device to alert you every 30 minutes.Alert Name Alert Type DescriptionAnchor Drag Event You can set a maximum distance for your vessel to drift after dropping anchor.Proximity Recurring See page 8.Distance Event, recurringYou can set an interval or a custom distance from your final destination.Time Event, recurringYou can set an interval or a custom time from your estimated time of arrival.Elevation Event, range, recurringYou can set minimum and maximum elevation values. You can also set the device to alert you when you ascend or descend a specified amount.Nav. Arrival Event You can set alerts for reaching waypoints and the final destination of a track or route.Speed Range You can set minimum and maximum speed values.Battery Event You can set a minimum battery power value.Setting a Proximity AlarmProximity alarms alert you when you are within a specified range of a particular location.1Select the blue key.2Select Alerts > Proximity > Edit > Create New.3Select a location.4Enter a radius.5Select Done.Navigating with Sight 'N GoYou can point the device at an object in the distance, such as a water tower, lock in the direction, and then navigate to the object.1Select the blue key.2Select GPS Tools > Sight 'N Go.3Point the blue marks on the bezel at an object.4Select the blue key.5Select an option:• Select Set Course to navigate to the distant object.• Select Project (page 3).6Navigate using the compass (page 2) or map (page 5).Calculating the Size of an AreaBefore you can calculate the size of an area, you must acquire satellites (page 2).1Select the blue key.2Select GPS Tools > Area Calc..3Walk around the perimeter of the area you want to calculate.4When you are finished, select the blue key to calculate the area.5Select an option:• Select Save Track, enter a name, and select Done.• Select Change Units to convert the area to a different unit.• Select to exit without saving.Viewing the AlmanacsYou can view almanac information for the sun and moon, and hunting and fishing.1Select the blue key.8 Applications
2Select an option:• To view the sunrise, sunset, moonrise, and moonset information, select GPS Tools > Sun & Moon.• To view the predicted best times for hunting and fishing, select GPS Tools > Hunt & Fish.3If necessary, select or to view a different day.Viewing Satellite InformationThe satellite page shows your current location, GPS accuracy, satellite locations, and signal strength.1Select the blue key.2Select Start GPS.3Select the blue key.4Select GPS Tools > Satellite.5Select to view additional information.Simulating a LocationWhen you are planning routes or activities in a different area, you can turn off GPS and simulate a different location.1Select the blue key.2Select Setup > System > GPS Mode > Demo Mode.3Select a location.4Select Go > Move to Location.ANT+™ SensorsThe device is compatible with these optional, wireless ANT+ accessories.• tempe™ wireless temperature sensor (page 9)• Heart rate monitorFor information about compatibility and purchasing additional sensors, go to http://buy.garmin.com.Pairing ANT+ SensorsPairing is the connecting of ANT+ wireless devices, for example, connecting a tempe temperature sensor with your Garmin device.1Bring the device within range (3 m) of the sensor.NOTE: Stay 10 m away from other ANT+ sensors while pairing.2Select the blue key.3Select Setup > ANT Sensor.4Select your sensor.5Select New Search.When the sensor is paired with your device, the sensor status changes from Searching to Connected. Sensor data appears in the data page loop or a custom data field.Streaming NMEA 2000 DataWhile tracking or navigating, your device can stream data from a NMEA 2000 network equipped with a Garmin GNT.1Select the blue key.2Select Setup > ANT Sensor > GNT > On.The data pages display information from the sensors connected to the NMEA 2000 network. You can customize the data fields that appear on each data page.3Select twice.4Select Stream N2K to begin streaming NMEA 2000 data.To stop streaming NMEA 2000 data, select the blue key, and select Stop N2K.Using Automatic Man OverboardIf your device is connected to a Garmin GNT, you can set the device to automatically trigger the preset man overboard function if the device loses contact with a GNT for more than 10 seconds.1Select the blue key.2Select Auto MOB > On.When the device loses contact with a GNT for more than 10 seconds, the man overboard function is activated on the device and on all chartplotters connected to the NMEA 2000 network. A man overboard waypoint is created on the chartplotter and the device.3Select an option:• To acknowledge the man overboard activation and save the MOB waypoint, select Confirm.• To dismiss the man overboard activation in the case of accidental triggering, select Clear.• To dismiss the man overboard activation and turn off the automatic man overboard function, select Disable.tempeThe tempe is an ANT+ wireless temperature sensor. You can attach the sensor to a secure strap or loop where it is exposed to ambient air, and therefore, provides a consistent source of accurate temperature data. You must pair the tempe with your device to display temperature data from the tempe.Putting On the Heart Rate MonitorNOTE: If you do not have a heart rate monitor, you can skip this task.You should wear the heart rate monitor directly on your skin, just below your breastplate. It should be snug enough to stay in place during your activity.1Snap the heart rate monitor module À onto the strap.2Wet both electrodes Á on the back of the strap to create a strong connection between your chest and the transmitter.3If the heart rate monitor has a contact patch Â, wet the contact patch.4Wrap the strap around your chest, and connect the strap hook à to the loop.The Garmin logo should be right-side up.5Bring the device within range (3 m) of the heart rate monitor.After you put on the heart rate monitor, it is on standby and ready to send data.TIP: If the heart rate data is erratic or does not appear, you may have to tighten the strap on your chest or warm up for 5–10 minutes.ANT+™ Sensors 9
Customizing Your DeviceSetup OverviewThe Setup menu contains numerous ways to customize your device. Garmin recommends that you take the time to familiarize yourself with the settings for each feature. If you take the time to customize your settings before your activity, you will spend less time adjusting the watch during your activity.Select the Blue key, and select Setup.NOTE: Any changes you make are saved to the active profile (page 1).System: Sets the GPS settings, arrow keys, and the device language (page 10).Data Pages: Customizes data pages and data fields (page 10).Sensors: Customizes the compass (page 10) and altimeter (page 10) settings.ANT Sensor: Sets up wireless accessories such as the heart rate monitor or tempe (page 9).Tones: Customizes the tones and vibrations (page 10).Display: Adjusts the backlight and screen contrast (page 10).Reset: Clears the trip data, sensor plots (page 14), waypoints, or track log, or resets all of your settings (page 14).Map: Customizes the map orientation and how items appear on the map (page 11).Tracks: Customizes the track recording settings (page 11).Time: Customizes the appearance of the time page (page 11).Units: Changes the units of measure for data such as distance, elevation, and temperature (page 11).Pos. Format: Changes how your position data appears (page 11).Profiles: Changes the active profile and allows you to edit your profiles (page 1).Menu: Customizes the items that appear in the main menu (page 11).About: Shows information about the device and software (page 11).System SettingsSelect Setup > System.GPS Mode: Sets the GPS to Normal, or Demo Mode (GPS off).WAAS: Sets the device to use Wide Area Augmentation System (WAAS) GPS signals. For information about WAAS, go to www.garmin.com/aboutGPS/waas.html.Hot Keys: Allows you to customize the hold function of the arrow keys.Language: Sets the text language on the device.NOTE: Changing the text language does not change the language of user-entered data or map data.USB Mode: Sets the device to use mass storage mode or Garmin mode when connected to a computer.Customizing the Data PagesYou can customize the data pages for each profile.1Select the blue key.2Select Setup > Data Pages.3Select a category.4Select Add Page.5Follow the on-screen instructions to select the number of data fields and the type of data to appear.6If necessary, select an existing data page.7Select an option:• Select Edit, and change the data fields.• Select Move Up or Move Down to change the order of the data pages.• Select Delete to remove the data page from the page loop.Compass SettingsSelect Setup > Sensors > Compass.Display: Sets the directional heading on the compass to degrees or milli-radians.North Ref.: Sets the north reference of the compass (page 10).Mode: Sets the compass to use either a combination of GPS and the electronic sensor data when moving (Auto) or GPS data only (Off).Calibrate: Allows you to manually calibrate the compass sensor (page 2).Setting the North ReferenceYou can set the directional reference used in calculating heading information.1Select the blue key.2Select Setup > Sensors > Compass > North Ref..3Select an option:• To set geographic north as the heading reference, select True.• To set the magnetic declination for your location automatically, select Magnetic.• To set grid north (000º) as the heading reference, select Grid.• To set the magnetic variation value manually, select User, enter the magnetic variance, and select Done.Altimeter SettingsSelect Setup > Sensors > Altimeter.Auto Cal.: Allows the altimeter to self-calibrate each time you turn on GPS tracking.Baro. Plot: Variable records changes in elevation while you are moving. Fixed assumes the device is stationary at a fixed elevation, so the barometric pressure should only change due to weather. Amb. Press. records ambient pressure changes over a period of time.Elev. Plot: Sets the device to record elevation changes over a period of time or distance.Calibrate: Allows you to manually calibrate the altimeter sensor.Setting the Device TonesYou can customize tones for messages and keys.1Select the blue key.2Select Setup > Tones.3Select Messages or Keys.4Select an option.Display SettingsSelect Setup > Display.Backlight: Adjusts the backlight level and the length of time before the backlight turns off.Contrast: Adjusts the screen contrast.10 Customizing Your Device
Map SettingsSelect Setup > Map.Orientation: Adjusts how the map is shown on the page. North Up shows North at the top of the page. Track Up shows your current direction of travel toward the top of the page.Auto Zoom: Automatically selects the appropriate zoom level for optimal use on your map. When Off is selected, you must zoom in or out manually.Points: Selects the zoom level for points on the map.Track Log: Allows you to show or hide tracks on the map.Go To Line: Allows you to select how the course appears on the map.Map Colors: Allows you to select whether land or water is highlighted on the map.Track SettingsSelect Setup > Tracks.Method: Selects a track recording method. Auto records the tracks at a variable rate to create an optimum representation of your tracks. If you select Distance or Time, you can set the interval rate manually.Interval: Allows you to set the track log recording rate. Recording points more frequently creates a more-detailed track, but it fills the track log faster.Auto Start: Sets the device to record your track automatically when you select Start GPS.Auto Save: Sets the device to automatically save your track when you turn off GPS.Auto Pause: Sets the device to stop recording your track when you are not moving.Time SettingsSelect Setup > Time.Time Page: Allows you to customize the appearance of the time of day.Format: Allows you to select a 12-hour or a 24-hour display time.Time Zone: Allows you to select the time zone for the device. You can select Auto to set the time zone automatically based on your GPS position.Changing the Units of MeasureYou can customize units of measure for distance and speed, elevation, depth, temperature, and pressure.1Select the blue key.2Select Setup > Units.3Select a measurement type.4Select a unit of measure.Position Format SettingsNOTE: Do not change the position format or the map datum coordinate system unless you are using a map or chart that specifies a different position format.Select Setup > Pos. Format.Format: Sets the position format in which a given location reading appears.Datum: Sets the coordinate system on which the map is structured.Spheroid: Shows the coordinate system the device is using. The default coordinate system is WGS 84.Customizing the Main MenuYou can add, delete, or move items in the main menu.1Select the blue key.2Select Setup > Menu.3Select a menu item.4Select an option:• Select Move Up or Move Down to change the location of the item in the list.• Select Remove to delete an item from the list.• Select Insert to add an item to the list.Device InformationViewing Device InformationYou can view the unit ID, software version, and license agreement.1Select the blue key.2Select Setup > About.Updating the SoftwareNOTE: Updating the software does not erase any of your data or settings.1Connect your device to a computer using the USB cable.2Go to www.garmin.com/products/webupdater.3Follow the on-screen instructions.Device CareNOTICEDo not use a sharp object to clean the device.Avoid chemical cleaners and solvents that can damage plastic components.Thoroughly rinse the device with fresh water after exposure to chlorine, salt water, sunscreen, pest repellant, cosmetics, alcohol, or other harsh chemicals. Prolonged exposure to these substances can damage the case.Avoid pressing the keys under water.Avoid extreme shock and harsh treatment, because it can degrade the life of the product.Cleaning the Device1Wipe the device with a cloth dampened with a mild detergent solution.2Wipe it dry.SpecificationsBattery type 500 mAh Lithium-ion batteryBattery life Up to 6 weeksWater resistance Water resistant to 164 ft. (50 m)NOTE: The watch is designed for surface swimming.Operating temperature rangeFrom -4ºF to 122ºF (from -20ºC to 50ºC)Radio frequency/protocol2.4 GHz ANT+ wireless communications protocolBluetooth® Smart deviceBattery InformationThe actual battery life depends on how much you use GPS, device sensors, optional wireless sensors, and the backlight.Device Information 11
Battery Life Mode16 hours Normal GPS mode25 hours NMEA 2000 streaming, GPS offUp to 2 weeks Always On sensor modeUp to 6 weeks Watch modeData ManagementNOTE: The device is not compatible with Windows 95, 98, Me, Windows NT®, and Mac OS 10.3 and earlier.File TypesThe device supports these file types.• Files from HomePort. Go to www.garmin.com/trip_planning.• GPI custom POI files from the Garmin POI Loader. Go to www.garmin.com/products/poiloader.• GPX track files.• GPX geocache files. Go to www.opencaching.com.Deleting FilesNOTICEIf you do not know the purpose of a file, do not delete it. Your device memory contains important system files that should not be deleted.1Open the Garmin drive or volume.2If necessary, open a folder or volume.3Select a file.4Press the Delete key on your keyboard.Disconnecting the USB CableIf your device is connected to your computer as a removable drive or volume, you must safely disconnect your device from your computer to avoid data loss. If your device is connected to your Windows computer as a portable device, it is not necessary to safely disconnect.1Complete an action:• For Windows computers, select the Safely Remove Hardware icon in the system tray, and select your device.• For Mac computers, drag the volume icon to the trash.2Disconnect the cable from your computer.Data FieldsACCURACY (GPS): The margin of error for your exact location. For example, your GPS location is accurate to within +/- 12 feet (3.65 m).AMB PRESS (ambient pressure): The uncalibrated environmental pressure.ASCENT (ascent total): The total elevation distance ascended since the last reset.AVG ASCENT (average ascent): The average vertical distance of ascent since the last reset.AVG DESCNT (average descent): The average vertical distance of descent since the last reset.AVG SPEED (average speed overall): The average speed while moving and stopped since the last reset.BAROMETER (barometer pressure): The calibrated current pressure.BATTERY: The remaining battery power.BEARING: The direction from your current location to a destination. You must be navigating for this data to appear.CMP HDNG (compass heading): The direction the device is pointing based on the compass.COG: The actual direction of travel, regardless of the course steered and temporary variations in heading.COMPASS: A visual representation of the direction in which the device is pointing.COURSE: The direction from your starting location to a destination. Course can be viewed as a planned or set route. You must be navigating for this data to appear.DATE: The current day, month, and year.DESCENT (descent total): The total elevation distance descended since the last reset.DISTANCE (trip odometer): A running tally of the distance traveled since the last reset.ELEVATION: The altitude of your current location above or below sea level.FINAL DEST (waypoint at final destination): The last point on the route to the destination. You must be navigating for this data to appear.FINAL DIST (distance to final destination): The remaining distance to the final destination. You must be navigating for this data to appear.FINAL ETA (estimated time of arrival at final destination): The estimated time of day you will reach the final destination (adjusted to the local time of the destination). You must be navigating for this data to appear.FINAL ETE (estimated elapsed time to final destination): The estimated time remaining before you reach the destination. You must be navigating for this data to appear.FINAL VDST (vertical distance to final destination): The elevation distance between your current position and the final destination. You must be navigating for this data to appear.FINAL VSPD (vertical speed to final destination): The rate of ascent or descent to a predetermined altitude. You must be navigating for this data to appear.GLIDE RATIO: The glide ratio required to descend from your current position to the destination elevation. You must be navigating for this data to appear.GPS (signal strength): The strength of the GPS satellite signal.GPS ELEVTN (GPS elevation): The altitude of your current location using GPS.GRADE: The calculation of rise (elevation) over run (distance). For example, if for every 10 feet (3 m) you climb you travel 200 feet (60 m), the grade is 5%.GR DEST (glide ratio to destination): The glide ratio required to descend from your current position to the destination elevation. You must be navigating for this data to appear.HEADING: The direction you are moving.HEART RATE: Your heart rate in beats per minute (bpm). Your device must be connected to a compatible heart rate monitor.LAT/LON (latitude/longitude): The current position in latitude and longitude regardless of the selected position format setting.LOCATION (selected): The current position using the selected position format setting.MAX ASCENT (maximum ascent): The maximum rate of ascent in feet per minute or meters per minute since the last reset.MAX DESCNT (maximum descent): The maximum rate of descent in feet per minute or meters per minute since the last reset.MAX ELEVTN (maximum elevation): The highest elevation reached since the last reset.12 Device Information
MAX SPEED (maximum speed): The highest speed reached since the last reset.MAX TEMP: The maximum temperature for the current activity.MIN ELEVTN (minimum elevation): The lowest elevation reached since the last reset.MIN TEMP: The minimum temperature for the current activity.MOV'N AVG (moving average): The average speed while moving since the last reset.MOV'N TIME (moving time): A running tally of the time spent moving since the last reset.NEXT DEST (next destination): The next point on the route. You must be navigating for this data to appear.NEXT DIST (next distance): The remaining distance to the next waypoint on the route. You must be navigating for this data to appear.NEXT ETA: The estimated time of day you will reach the next waypoint on the route (adjusted to the local time of the waypoint). You must be navigating for this data to appear.NEXT ETE: The estimated time remaining before you reach the next waypoint in the route. You must be navigating for this data to appear.NEXT VDST (next vertical distance): The elevation distance between your current position and the next waypoint in the route. You must be navigating for this data to appear.ODOMETER: A running tally of distance traveled for all trips. This total does not clear when resetting the trip data.SOG: The actual speed of travel, regardless of the course steered and temporary variations in heading.STOP TIME: A running tally of the time spent not moving since the last reset.STOPWATCH: The stopwatch time for the current activity.SUNRISE: The time of sunrise based on your GPS position.SUNSET: The time of sunset based on your GPS position.TEMP (temperature): The temperature of the air. Your body temperature affects the temperature sensor.TIME: A running tally of the total time spent moving and not moving since the last reset.TIMER: The current time of the countdown timer.TO COURSE: The direction in which you must move to get back on the route. You must be navigating for this data to appear.TOD (time of day): The current time of day based on your current location and time settings (format, time zone, daylight saving time).TRACK DIST (track distance): The distance traveled for the current track.TURN: The angle of difference (in degrees) between the bearing to your destination and your current course. L means turn left. R means turn right. You must be navigating for this data to appear.VERT SPEED (vertical speed): The rate of ascent or descent over time.VMG (velocity made good): The speed at which you are closing on a destination along a route. You must be navigating for this data to appear.XTE (cross track error): The distance to the left or right by which you have strayed from the original path of travel. You must be navigating for this data to appear.NMEA 2000 Data FieldsAWA (average wind angle): The wind angle measured with respect to the current vessel heading.A WIND CHL (apparent wind chill) : The temperature of the wind chill relative to the boat.AWS (average wind speed): The average measured speed of the wind since last reset.CARD WIND (cardinal wind direction): The true wind direction described in cardinal directions.DEPTH: The depth of the water. DRIFT: The speed of the current.G WIND CHL (ground wind chill): The temperature of the wind chill relative to the land.G WIND DIR (ground wind direction): The direction of the wind relative to the land, referenced from north. G WIND SPD (ground wind speed): The speed of the wind relative to the ground. If there is no current and no leeway, ground wind speed is equivalent to the true wind speed.H2O TEMP (water temperature): The temperature of the water.OPP TACK (opposite tack heading): The opposite tack heading of the vessel based upon current tack heading.SET: The direction of the current referenced from north. STW (speed through water): The speed of the boat relative to the water.TWD (true wind direction: The true direction of the wind relative to the vessel.TWS (true wind speed): The true speed of the wind relative to the vessel.WIND VMG (wind velocity made good): The speed at which you are making progress into the wind.Data PagesBy default, these pages appear for the sailing profile.Page Default Tracking Navigating Tracking with NMEA 2000 Data Navigating with NMEA 2000 Data1 Clock Tack assist Tack assist Tack assist Tack assist2 Temperature COG and SOG DTN, ET, and bearing COG, depth, and SOG COG, depth, and SOG3 Barometer Distance and time COG and SOG Map Bearing and distance to opposite tack4 Compass Compass Distance and time Wind VMG Map5 Barometer Compass TWS and TWD Wind VMG and TWS6 Temperature Barometer AWS and AWA AWS and AWA7 Map Temperature Clock Clock8 Clock Map9 ClockBy default, these pages appear for the powerboat profile.Device Information 13
Page Default Tracking Navigating Tracking with NMEA 2000 Data Navigating with NMEA 2000 Data1 Clock COG and SOG DTN, ET, and bearing COG and SOG ETE, distance, and ETA2 Temperature Distance and time COG and SOG Map Map3 Barometer Compass Distance and time Water temperature and depth Water temperature and depth4 Compass Barometer Compass Clock Clock5 Temperature Barometer COG and SOG6 Map Temperature7 Clock Map8 ClockBy default, these pages appear for the watersports profile.Page Default Tracking Navigating Tracking with NMEA 2000 Data Navigating with NMEA 2000 Data1 Clock COG and SOG DTN, ET, and bearing COG and SOG COG and SOG2 Temperature Distance and time COG and SOG Map DTN, ET, and bearing3 Barometer Compass Distance and time Water temperature and depth Map4 Compass Barometer Compass Clock Water temperature and depth5 Temperature Barometer Clock6 Map Temperature7 Clock Map8 ClockBy default, these pages appear for the fitness profile.Page Default Tracking Navigating1 Clock COG and SOG DTN, ET, and bearing2 Temperature Distance and time COG and SOG3 Barometer Compass Distance and time4 Compass Barometer Compass5 Temperature Barometer6 Map Temperature7 Clock Map8 ClockTroubleshootingLocking the KeysYou can lock the keys to prevent inadvertent key presses.1Select the data page you want to view while the keys are locked.2Hold and to lock the keys.3Hold and to unlock the keys.Resetting Your DeviceIf the device stops responding, you may need to reset it.1Hold for at least 25 seconds.2Hold for one second to turn on the device.Resetting the Device to Factory SettingsYou can restore all of the device settings to the factory default values.1Select the blue key.2Select Setup > Reset > All Settings > Yes.Clearing All Sensor Plot Data1Select the blue key.2Select Setup > Reset > Clear Plots > Yes.AppendixRegistering Your DeviceHelp us better support you by completing our online registration today.• Go to http://my.garmin.com.• Keep the original sales receipt, or a photocopy, in a safe place.Software License AgreementBY USING THE DEVICE, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY.Garmin Ltd. and its subsidiaries (“Garmin”) grant you a limited license to use the software embedded in this device (the “Software”) in binary executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in and to the Software remain in Garmin and/or its third-party providers.You acknowledge that the Software is the property of Garmin and/or its third-party providers and is protected under the United States of America copyright laws and international copyright treaties. You further acknowledge that the structure, organization, and code of the Software, for which source code is not provided, are valuable trade secrets of Garmin and/or its third-party providers and that the Software in source code form remains a valuable trade secret of Garmin and/or its third-party providers. You agree not to decompile, disassemble, modify, reverse assemble, reverse engineer, or reduce to human readable form the Software or any part thereof or create any derivative works based on the Software. You agree not to export or re-export the Software to any country in violation of the export control laws of the United States of America or the export control laws of any other applicable country.14 Appendix
IndexAalarms 8clock 8proximity 8alerts 8location 8almanachunting and fishing 8sunrise and sunset 8altimeter 2, 10, 14ANT+ sensors 9ANT+ sensors, pairing 9area calculation 8autopilot 7pairing 7unpairing 7Bbacklight 1, 10barometer 2, 14battery 11charging 1life 11bearing pointer 3BlueChart Mobile 5Ccalibratingaltimeter 2compass 2charging the device 1cleaning the device 11compass 2, 3, 10computer, connecting 4contrast 10coordinates 2countdown timer 8customizing the device 10Ddata, sharing 4data fields 10data streaming 9deletingall user data 12locations 3profiles 1demo mode 9device, registration 14distance 4Eelevation 2plot 2, 14Ffiles, types 12fishing times 8Ggeocaches 4GPS 10, 11signal 2, 4, 9stopping 2, 9Hheart rate monitor 9HomePort 4, 12hunting and fishing times 8Kkeys 1, 10locking 14Llanguage 10locations 2, 9editing 3saving 3locking, keys 14Mmain menu, customizing 11man overboard., automatic 9 See also MOBman overboard (MOB) 5maps 4browsing 5navigating 5orientation 11settings 11zoom 5menu 1moon phase 8Nnavigation 2compass 2Sight 'N Go 8stopping 3waypoints 3NMEA 2000 9north reference 10Ppairing ANT+ sensors 9POI Loader 12position format 11product registration 14profiles 1proximity alarms 8Rracing 5registering the device 14resetting, device 14resetting the device 14restoring settings 14routes 2, 4creating 4deleting 4editing 4viewing on the map 4Ssailingrace start line 5race timer 5racing 5tack angles 7tack assist 6, 7satellite page 9satellite signals 2, 4, 9screen 10settings 10, 11, 14sharing data 4Sight 'N Go 8softwareupdating 11version 11software license agreement 11, 14specifications 11speed 4stopwatch 8sunrise and sunset times 8system settings 10Ttack assist 6tempe 9temperature 2, 9tides 7time settings 8, 11time zones 8, 11timer, countdown 8tones 8, 10TracBack 5tracks 2, 4, 11deleting 4trip planner. See routestroubleshooting 14Uunit ID 11units of measure 11updating software 11USBdisconnecting 12transferring files 12user data, deleting 12Vvibration alerts 10WWAAS 10water resistance 11waypoints 1–4deleting 3editing 3projecting 3saving 3Zzones, time 8zooming 1maps 5Index 15
www.garmin.com/support913-397-82001-800-800-10200808 238 0000+44 870 850 1242 1-866-429-9296 +43 (0) 820 220 230+32 2 672 52 54 +45 4810 5050 +358 9 6937 9758 + 331 55 69 33 99+49 (0)1805-427646-880 + 39 02 36 699699 0800 - 023 3937035 - 539 3727 + 47 815 69 55500800 4412 454+44 2380 662 915 + 35 1214 447 460 + 34 902 007 097 + 46 7744 52020Garmin International, Inc.1200 East 151st StreetOlathe, Kansas 66062, USAGarmin (Europe) Ltd.Liberty House, Hounsdown Business ParkSouthampton, Hampshire, SO40 9LR UKGarmin CorporationNo. 68, Zhangshu 2nd Road, Xizhi Dist.New Taipei City, 221, Taiwan (R.O.C.)© 2013 Garmin Ltd. or its subsidiaries

Navigation menu