Garmin 01738 GPS- Enabled Cycling Computer User Manual users manual 1

Garmin International Inc GPS- Enabled Cycling Computer users manual 1

Contents

users manual 1

DRAFTEDGE® 800GPS-ENABLED CYCLING COMPUTERowner’s manualNew cover coming soon....
© 2010 Garmin Ltd. or its subsidiaries All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. Visit the Garmin Web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products.Garmin®, Garmin Training Center®, Auto Pause®, Auto Lap®, Virtual Partner®, Edge®, are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Garmin Connect™, GSC™10, ANT™, and ANT+™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.Windows® is a registered trademark of Microsoft Corporation in the United States and/or other countries. Mac® is a registered trademark of Apple Computer, Inc. Firstbeat and Analyzed by Firstbeat are registered or unregistered trademarks of Firstbeat Technologies Ltd. Other trademarks and trade names are those of their respective owners.
DRAFTEdge 800 Owner’s Manual  iii Table of ContentsGetting Started .................... 1About the Battery ....................... 1Installing the Edge ..................... 2Turning on the Edge .................. 4Acquiring Satellite Signals ......... 6Optional ANT+ Sensors ............. 6Going for a Ride ........................ 7Saving Your Ride Data .............. 7Using Free Software .................. 7Transferring History to Your Computer  ............................... 8Training with Your Edge ..... 9Alerts ......................................... 9Using Auto Lap by Distance .... 10Using Auto Lap by Position.......11Using Auto Pause .................... 12Using Auto Scroll ..................... 12Courses ................................... 13Workouts ................................. 16ANT+ Sensors ................... 20Tips for Pairing ANT+ Sensors  with Your Garmin Device ....... 20Putting on the Heart Rate  Monitor .................................. 21Using the Heart Rate Monitor .. 22Heart Rate Zones .................... 23Replacing the Heart Rate  Monitor Battery ...................... 24Installing the GSC 10............... 25Using the GSC 10.................... 28Replacing the GSC 10  Battery ................................... 29Third-Party ANT+ Sensors ...... 30ANT+ Sensor  Troubleshooting .................... 31History ............................... 33Viewing History ........................ 33Viewing Distance and Time  Totals ..................................... 34Deleting History ....................... 34Data Recording........................ 34
DRAFTiv  Edge 800 Owner’s Manual Data Management ............. 35Connecting the USB Cable ..... 35Loading Files ........................... 35Deleting Files ........................... 36Settings ............................. 37Customizing Your Data  Fields .................................... 37Data Fields .............................. 38Changing Your System  Settings ................................. 41Changing Your User Prole Settings ................................. 43Updating Your Bike Prole ....... 43Switching Bikes ....................... 44Changing the Start Notice ....... 44Speed Zones ........................... 44GPS Settings ........................... 45Setting Elevation Points........... 46Appendix ........................... 47Registering Your Device .......... 47About the Edge ........................ 47Updating the Software ............. 47Contacting Garmin Product  Support ................................. 47Using the Backlight .................. 48Buying Optional Accessories ... 48Specications .......................... 48Wheel Size and  Circumference ....................... 51Activity Classes ....................... 53Troubleshooting ....................... 54Index .................................. 56
DRAFTEdge 800 Owner’s Manual  1IntroductionIntroduction WARNINGAlways consult your physician before you begin or modify any exercise program. See the Important Safety and Product Information guide in the product box for product warnings and other important information.Setting Up the DeviceWhen using your Edge® the rst time, follow the setup instructions in the Edge 800 Quick Start Manual.About the Battery WARNINGThis product contains a lithium-ion battery. See the Important Safety and Product Information guide in the product box for product warnings and other important information.The Edge is powered by a built-in, lithium-ion battery that you can charge using the AC charger or the USB cable included in the product box. NOTE: The Edge will not charge when outside the temperature range of 32°F to 122°F (0°C to 50°C).Device OverviewKeys
DRAFT2  Edge 800 Owner’s ManualIntroductionPress and hold to turn the device on and off. Press to view the status page and adjust the backlight. LAP/RESET  Press to create a new lap.Press and hold to reset the timer. START/STOPPress to start and stop the timer.Manual Conventions
DRAFTEdge 800 Owner’s Manual  3Introduction
DRAFT4  Edge 800 Owner’s ManualIntroduction
DRAFTEdge 800 Owner’s Manual  5Training with Your EdgeTraining with Your EdgeGoing for a RideBefore you can record history, you must acquire satellite signals. 1.  Press and hold MENU to view the timer page. 2.  Press START to start the timer. History is only recorded while the timer is running.3.  After completing your ride, press STOP. Saving Your Ride DataPress and hold RESET to save your ride data and reset the timer.AlertsYou can use Edge alerts to train toward specic time, distance, calorie, heart rate, cadence, and power goals. Using Time, Distance, and Calorie Alerts1.  Press and hold MENU.2.  Select Training > Alerts.3.  Select Time Alert, Distance Alert, or Calorie Alert.4.  Turn on the alert.5.  Enter a time, distance, or calorie amount.6.  Go for a ride. Each time you reach the alert amount,
DRAFT6  Edge 800 Owner’s ManualTraining with Your Edgethe Edge beeps and displays a message.NOTE: To turn on audible tones for messages, see page 49.Using Advanced AlertsIf you have an optional heart rate monitor, GSC 10, or third-party ANT+ power sensor, you can set up advanced alerts.1.  Press and hold MENU.2.  Select Training > Alerts.3.  Select an option:Select HR Alert to set the minimum and maximum heart rate in beats per minute (bpm). NOTE: For more information about heart rate zones and settings, see page 19.•Select Cadence Alert to set the fast and slow cadence amounts in revolutions of the crank arm per minute (rpm).Select Power Alert to set the minimum and maximum power amounts in watts. 4.  Go for a ride. Each time you exceed or drop below the specied heart rate, cadence, or power amount, the Edge beeps and displays a message.NOTE: To turn on audible tones for messages, see page 49.••
DRAFTEdge 800 Owner’s Manual  7Training with Your EdgeCoursesCourses allow you to train using a previously recorded activity. You can follow the course trying to match or exceed previously set goals. For example, if the original course was completed in 30 minutes, you will race against a Virtual Partner® trying to complete the course in under 30 minutes. Garmin recommends that you use Garmin Connect or Garmin Training Center (page 31) to create courses. You can then transfer the courses to your Edge (page 37). Course PointsYou must use Garmin Training Center to add course points to any course. You can add course points, or places on your course that you want to remember, such as water stops or distance goals. Creating Courses with Your EdgeBefore you can create a course, you must have history with GPS track data saved to the Edge.1.  Press and hold MENU. 2.  Select Training > Courses > New.3.  Select a previous ride on which to base your course.The Edge assigns a default name to your new course that appears in the list. 4.  Select the course from the list.5.  Select Edit Course to rename the course. 6.  Enter a descriptive course name in the top eld (for example, 18mi_Ridgeview).
DRAFT8  Edge 800 Owner’s ManualTraining with Your EdgeStarting a Course1.  Press and hold MENU. 2.  Select Training > Courses.3.  Select the course from the list.4.  Select an option:Select Do Course.Select Map to preview the course, and press BACK to return to the course list.Select Prole to preview the elevation prole, and press BACK to return to the course list. 5.  Press START. History is recorded even if you are not on the course. The “Course Complete” message appears when you nish.6.  Go for a ride.•••7.  Press PAGE to view the data pages:
DRAFTEdge 800 Owner’s Manual  9Training with Your EdgeOff Course OptionsYou can include a warmup before you begin your course. Press START to begin the course, and then warm up as normal. Stay away from your course path as you warm up. When you are ready to begin, head toward your course. When you are on any part of the course path, the Edge displays an “On Course” message. NOTE: As soon as you press START, your Virtual Partner starts the course and does not wait for you to warm up.Virtual YouIf you stray away from the course, the Edge displays an “Off Course” message. Use the course map or course points to nd your way back to the course.
DRAFT10  Edge 800 Owner’s ManualTraining with Your EdgeChanging the Course Speed1.  Press and hold MENU. 2.  Select Training > Courses.3.  Select the course from the list.4.  Select Do Course. 5.  Press LIGHT. 6.  Use▼ and ▲ to adjust the percentage of time to complete the course. For example, to improve your course time by 20%, enter a course speed of 120%. You will race against the Virtual Partner to nish a 30-minute course in 24 minutes. Stopping a CoursePress and hold MENU, and select Training > Stop Course.Deleting a Course1.  Press and hold MENU.2.  Select Training > Courses.3.  Select a course. 4.  Select Delete Course > Yes.WorkoutsYou can use the Edge to create workouts that include goals for each workout step and for varied distances, times, and rest laps. After you create a workout, you can use Garmin Connect or Garmin Training Center to schedule the workout for a particular day. You can plan workouts in advance and store them on your Edge.
DRAFTEdge 800 Owner’s Manual  11Training with Your EdgeCreating WorkoutsGarmin recommends that you use Garmin Connect or Garmin Training Center (page 31) to create workouts. You can then transfer the workouts to your Edge (page 37). However, you can also create and save a workout directly on your Edge. 1.  Press and hold MENU. 2.  Select Training > Workouts > New.3.  Enter a descriptive workout name in the top eld (for example, QUICK 10).4.  Select Add New Step.5.  Select Duration to specify how the step will be measured. For example, select Distance to end the step after a specic distance. If you select Open, you can press LAP to end the step during your workout.6.  If necessary, enter a value in the eld below Duration.7.  Select Target to choose your goal during the step.For example, select Heart Rate to maintain a consistent heart rate during the step. 8.  If necessary, select a target zone or enter a custom range. For example, you can select a heart rate zone. Each time you exceed or drop below the specied heart rate, the Edge beeps and displays a message. 9.  If necessary, select Yes in the Rest Lap eld.During a rest lap, the timer continues to run and data is recorded.10. Press BACK to continue.11. Repeat steps 4–9 to add another new step.
DRAFT12  Edge 800 Owner’s ManualTraining with Your EdgeRepeating Workout StepsBefore you can repeat a workout step, you must create a workout with at least one step.1.  Select Add New Step.2.  In the Duration eld, select an option.Select Repeat to repeat a step one or more times.For example, you can repeat a 5-mile step ten times.Select Repeat Until to repeat a step for a specic duration. For example, you can repeat a 5-mile step for 60 minutes or until your heart rate reaches 160 bpm.3.  In the Back To Step eld, select a step to repeat.4.  If necessary, select Yes in the Rest Lap eld.5.  Press BACK to continue.••Starting a Workout1.  Press and hold MENU. 2.  Select Training > Workouts.3.  Select the workout.4.  Select Do Workout. 5.  Press START.6.  Go for a ride.7.  Press PAGE to view the data pages:After you begin a workout, the Edge displays each step of the workout, the goal (if any), and current workout data. An audible alarm sounds when you are about to nish a workout step. A message appears, counting down the time or distance until a new step begins. Ending a StepPress LAP to end a step early.
DRAFTEdge 800 Owner’s Manual  13Training with Your EdgeStopping a Workout1.  Press STOP to stop the timer. 2.  Press and hold RESET to save your ride data and reset the timer.About Editing WorkoutsYou can edit workouts within Garmin Connect, Garmin Training Center, or directly in the Edge. If you edit workouts in the Edge, your changes may be temporary. Garmin Connect and Garmin Training Center serve as the master list of workouts. If you edit a workout in the Edge, the changes might be overwritten the next time you transfer workouts from Garmin Connect or Garmin Training Center. To make a permanent change to a workout, edit the workout in Garmin Connect or Garmin Training Center and then transfer it to your Edge.Editing a Workout Using the Edge1.  Press and hold MENU. 2.  Select Training > Workouts.3.  Select the workout.4.  Select Edit Workout.5.  Select the step. 6.  Select Edit Step.7.  Make any necessary changes, and press BACK to continue. 8.  Press BACK to save and to exit.Deleting a Workout1.  Press and hold MENU. 2.  Select Training > Workouts.3.  Select the workout.4.  Select Delete Workout > Yes.
DRAFT14  Edge 800 Owner’s ManualTraining with Your Edge
DRAFTEdge 800 Owner’s Manual  15Training with Your Edge
DRAFT16  Edge 800 Owner’s ManualTraining with Your Edge
DRAFTEdge 800 Owner’s Manual  17ANT+ SensorsANT+ SensorsThe Edge is compatible with the following ANT+ accessories:Heart rate monitor (page 18)GSC 10 speed and cadence sensor (page 22)Third-party ANT+ sensors  (page 26)For information about purchasing additional accessories, go to  http://buy.garmin.com.Tips for Pairing ANT+ Sensors with Your Garmin DeviceMake sure that the ANT+ sensor is compatible with your Garmin device.Before you pair the ANT+ sensor with your Garmin device, move 10 m away from other ANT+ •••••sensors. Bring the Garmin device within range (3 m) of the ANT+ sensor.After you pair the rst time, your Garmin device automatically recognizes the ANT+ sensor each time it is activated. This process occurs automatically when you turn on the Garmin device and only takes a few seconds when the sensors are activated and functioning correctly. When paired, your Garmin device only receives data from your sensor, and you can go near other sensors. •••
DRAFT18  Edge 800 Owner’s ManualANT+ SensorsPutting on the Heart Rate MonitorWear the heart rate monitor directly on your skin, just below your breastplate. It should be snug enough to stay in place during your ride.1.  Connect the heart rate monitor module ➊ to the strap.➊2.  Wet both electrodes ➋ on the back of the strap to create a strong connection between your chest and the transmitter.➋3.  Wrap the strap around your chest, and connect it.The Garmin logo should be right-side up.4.  Bring the device within range (3 m) of the heart rate monitor. TIP: If the heart rate data is erratic or does not appear, you may have to tighten the strap on your chest or warm up for 5–10 minutes. After you put on the heart rate monitor, it is on standby and ready to send data.  Paring the Heart Rate MonitorIf you purchaced a heart rate monitor separately, you must pair it with the Edge in order to view your heart rate data.1.  Turn on the Edge. 2.  Bring the Edge within range (3 m) of the heart rate monitor.
DRAFTEdge 800 Owner’s Manual  19ANT+ Sensors3.  Select MENU >   > Bike Settings > Heart Rate > ANT+ Heart Rate.4.  Select Heart Rate Monitor > Yes > Rescan.6.  Press Power.When the heart rate monitor is paired, a message appears and the  heart rate icon appears solid on the status page.7.  If necessary, customize heart rate data elds (page 39). TIP: If heart rate data does not appear or if you have erratic heart rate data, you may have to tighten the strap on your chest or warm up for 5 to 10 minutes (see page 28). Setting Your Heart Rate ZonesThe Edge uses your user prole information from the initial setup to determine your heart rate zones. For the most accurate calorie data during your ride, set your maximum heart rate, resting heart rate, and heart rate zones.1.  Select MENU >   > Bike Settings > Heart Rate > Heart Rate Zones.2. Heart Rate Settings
DRAFT20  Edge 800 Owner’s ManualANT+ SensorsHeart Rate Zones% of Maximum Heart Rate or Resting Heart RatePerceived Exertion Benets1 50% to 60% Relaxed, easy pace; rhythmic breathingBeginning-level aerobic training; reduces stress2 60% to 70% Comfortable pace; slightly deeper breathing, conversation possibleBasic cardiovascular training; good recovery pace3 70% to 80% Moderate pace; more difcult to hold conversationImproved aerobic capacity; optimal cardiovascular training4 80% to 90% Fast pace and a bit uncomfortable; breathing forcefulImproved anaerobic capacity and threshold; improved speed5 90% to 100% Sprinting pace, unsustainable for long period of time; labored breathingAnaerobic and muscular endurance; increased power
DRAFTEdge 800 Owner’s Manual  21ANT+ SensorsAbout Heart Rate Zones CAUTION Consult your physician to specify heart rate zones that are appropriate for your tness level and health condition. Many athletes use heart rate zones to measure and increase their cardiovascular strength and improve their level of tness. A heart rate zone is a specied range of heartbeats per minute. The ve commonly accepted heart rate zones are numbered from 1 to 5 according to increasing intensity. How do heart rate zones affect your tness goals? Knowing your heart rate zones can help you measure and improve your tness by understanding and applying these principles:Your heart rate is a good measure of exercise intensity.Training in specic heart rate zones can help you improve ••cardiovascular capacity and strength.Knowing your heart rate zones can prevent you from overtraining and can decrease your risk of injury.Replacing the Heart Rate Monitor Battery (SS)The heart rate monitor contains a user-replaceable CR2032 battery. NOTE: Contact your local waste disposal department to properly dispose of batteries. 1.  Locate the circular battery cover on the back of the heart rate monitor.2.  Use a coin to twist the cover counter-clockwise so the arrow on the cover points to OPEN. 3. Remove the cover and battery. 4.  Wait 30 seconds. •
DRAFT22  Edge 800 Owner’s ManualANT+ Sensors5.  Insert the new battery with the positive side facing up.NOTE: Be careful not to damage or lose the O-ring gasket on the cover. 6.  Use a coin to twist the cover clockwise so the arrow on the cover points to CLOSE.Installing the GSC 10NOTE: If you do not have a GSC 10, you can skip this step. Both magnets must be aligned with their respective indication lines for the Edge to receive data. 1.  Place the GSC 10 on the rear chain stay (on the side opposite the drive train). NOTE: Place the at rubber pad ➊ or the triangle-shaped rubber pad between the GSC 10 and the chain stay for stability.
DRAFTEdge 800 Owner’s Manual  23ANT+ Sensors➊➋➏➓2.  Loosely attach the GSC 10 using two cable ties ➋.3.  Attach the pedal magnet ➌ to the crank arm using the adhesive mount and a cable tie ➍. The pedal magnet must be within 5 mm of the GSC 10. The indication line ➎ on the pedal magnet must line up with the indication line ➏ on the GSC 10.➌➍➎4.  Unscrew the spoke magnet ➐ from the plastic piece. ➐➑➒
DRAFT24  Edge 800 Owner’s ManualANT+ Sensors5.  Place the spoke in the groove of the plastic piece, and tighten it slightly. The spoke magnet can face away from the GSC 10 if there is not enough room between the sensor arm and the spoke. The spoke magnet must line up with the indication line ➑ on the sensor arm.6.  Loosen the screw ➒ on the sensor arm. 7.  Move the sensor arm to within 5 mm of the spoke magnet. You can also tilt the GSC 10 closer to either magnet for improved alignment. 8.  Press the Reset key ➓ on the GSC 10. The LED turns red, then green. 9.  Pedal to test the sensor alignment. The red LED blinks each time the pedal magnet passes the sensor. The green LED blinks each time the spoke magnet passes the sensor arm.NOTE: The LED blinks for the rst 60 passes after a reset. Press Reset again if you require additional passes.10. When everything is aligned and working correctly, tighten the cable ties, the sensor arm, and the spoke magnet.When the GSC 10 is paired, a message appears, and the   speed and cadence icons appear solid on the status page.
DRAFTEdge 800 Owner’s Manual  25ANT+ SensorsUsing the GSC 101.  Turn on the Edge. 2.  Bring the Edge within range (3 m) of the GSC 10. 3.  Press and hold MENU.4.  Select Settings > Bike Settings > [Bike 1] > ANT+ Spd/Cad.5.  Select Yes > Rescan.6.  Press BACK to return to the main menu.  When the GSC 10 is paired, a message appears, and the   speed and cadence icons appear solid on the status page.7.  Customize optional data elds (page 39).8.  Go for a ride. About the GSC 10Cadence data from the GSC 10 is always recorded. If there is no GSC 10 paired, GPS data is used to calculate the speed and distance.Cadence is your rate of pedaling or “spinning” measured by the number of revolutions of the crank arm per minute (rpm). There are two sensors on the GSC 10: one for cadence and one for speed. For information about cadence alerts, see page 6.Non-Zero Averaging for Cadence DataThe non-zero data-averaging setting is available if you are training with an optional cadence sensor. The default setting is to exclude zero values that occur when you are not pedaling. To turn the non-zero averaging on or off, select MENU >   > Bike Settings > Data Averaging > Cadence.
DRAFT26  Edge 800 Owner’s ManualANT+ SensorsReplacing the GSC 10 BatteryThe GSC 10 contains a user-replaceable CR2032 battery. NOTE: Contact your local waste disposal department to properly dispose of batteries. 1.  Locate the circular battery cover on the side of the GSC 10.Battery CR2032 battery2.  Use a coin to twist the cover counter-clockwise until it is loose enough to remove (arrow points to unlocked).3. Remove the cover and battery. 4.  Wait 30 seconds. 5.  Insert the new battery with the positive side facing up.NOTE: Be careful not to damage or lose the O-ring gasket on the cover. 6.  Use a coin to twist the cover back into place (arrow points to locked).ArrowUnlockedBattery Third-Party ANT+ SensorsFor a list of third-party ANT+ sensors that are compatible with the Edge, go
DRAFTEdge 800 Owner’s Manual  27ANT+ Sensorsto www.garmin.com/intosports. Pairing Your Power MeterRefer to the manufacturer’s instructions. When the power meter is paired, a message appears, and the   power icon appears solid on the status page.Calibrating Your Power MeterFor calibration instructions specic to your power meter, refer to the manufacturer’s instructions. Before you can calibrate your power meter, it must be properly installed and actively recording data.1.  Select MENU >   > Bike Settings > Bike Proiles. 2.  Select a bike prole.3.  Selec ANT+ Power > Calibrate. 4.  Keep your power meter active by pedaling until a message appears.Viewing Your Power ZonesYou can set seven custom power zones using Garmin Connect or Garmin Training Center. If you know your FTP (functional threshold power) value, you can enter it and allow the software to calculate your power zones automatically. 1.  Press and hold MENU.2.  Select Settings > Bike Settings > [Bike 1] > Power Zones.Non-Zero Averaging for Power DataThe non-zero data-averaging setting is available if you are training with an optional power meter. The default setting is to exclude zero values that occur when you are not pedaling. To turn the non-zero averaging on or off, select MENU >   > Bike Settings > Data Averaging > Power.
DRAFT28  Edge 800 Owner’s ManualANT+ SensorsANT+ Sensor TroubleshootingProblem SolutionThe ANT+ sensor will not pair with my device.Stay 10 m away from other ANT sensors while pairing.Bring the device within range (3 m) of the heart rate monitor while pairing.If the problem persists, replace the battery. •••I have a third-party ANT+ sensor. Make sure that it is compatible with the Edge (www.garmin .com/intosports). The heart rate monitor strap is too big.A smaller elastic strap is sold separately. Go to  http://buy.garmin.com.
DRAFTEdge 800 Owner’s Manual  29ANT+ SensorsProblem SolutionThe heart rate data is inaccurate or erratic.Make sure that the heart rate monitor is snug against your body.Reapply moisture to the electrodes. Use water, saliva, or electrode gel. Clean the electrodes. Dirt and sweat residue on the electrodes can interfere with heart rate signals.Position the heart rate monitor on your back instead of your chest.Wear a cotton shirt or wet your shirt if suitable for your activity. Synthetic fabrics that rub or ap against the heart rate monitor can create static electricity that interferes with heart rate signals.Move away from sources of strong electromagnetic elds and some 2.4 GHz wireless sensors, which can interfere with your heart rate monitor. Sources of interference may include high-voltage power lines, electric motors, microwave ovens, 2.4 GHz cordless phones, and wireless LAN access points.••••••
DRAFT30  Edge 800 Owner’s ManualHistoryHistoryYour Edge automatically saves history when the timer is started. The Edge can save at least 180 hours of ride data with typical use. When the Edge memory is full, a message appears. The Edge does not automatically delete or overwrite your history. See page 32 to learn how to delete history.Upload your history (page 31) to Garmin Connect or Garmin Training Center periodically to keep track of all of your ride data. History includes time, distance, calories, average speed, maximum speed, altitude, and detailed lap information. Edge history can also include heart rate, cadence, and power. NOTE: History is not recorded while the timer is stopped or paused.Viewing History1.  Press and hold MENU.2.  Select History > Activities.3.  Choose an option:Use ▼ and ▲ to scroll through your activities. Select View More to view the details for the entire ride or for each lap. ••
DRAFTEdge 800 Owner’s Manual  31HistoryViewing Distance and Time TotalsPress and hold MENU, and select History > Totals to view the accumulated ride distance and time.Using Free SoftwareGarmin provides two software options for storing and analyzing your ride data: Garmin Connect is Web-based software.Garmin Training Center is computer software that does not require the Internet after installation. 1.  Go to www.garmin.com /intosports.2.  Follow the on-screen instructions to install the software.••Transferring History to Your ComputernoticeTo prevent corrosion, thoroughly dry the mini-USB port, the weather cap, and the surrounding area before charging or connecting to a computer.1.  Connect the USB cable to an available USB port on your computer. 2.  Pull up the weather cap ➊ from the mini-USB port ➋.➊➋3.  Plug the small end of the USB cable into the mini-USB port.
DRAFT32  Edge 800 Owner’s ManualHistory4.  Open Garmin Connect  (www.garminconnect.com), or open Garmin Training Center. 5.  Follow the instructions included with the software. Deleting HistoryAfter you have transferred your history to your computer, you may want to delete the history from your Edge.1.  Press and hold MENU.2.  Select History > Delete.3.  Select an option:Select Indv. Activities to delete one activity at a time.Select All Activities to delete all ride data from the history. Select Old Activities to delete activities recorded more than one month ago.Select All Totals to reset the ride distance and time totals. ••••NOTE: This does not delete any history.4.  Select Yes.Data RecordingThe Edge uses smart recording. It records key points where you change direction, speed, or heart rate.When a third-party power meter  (page 26) is paired, the Edge records points every second. Recording points every second uses more of the available memory on the Edge, but creates a very accurate record of your ride.
DRAFTEdge 800 Owner’s Manual  33History
DRAFT34  Edge 800 Owner’s ManualNavigationNavigationInsert advance organizer?Include Map conguration stuff herefrom 62 MapThe position icon represents your location on the map. As you travel, the position icon moves and leaves a track log (trail). Waypoint names and symbols also appear on the map.Changing the Map Orientation1. From the map, press MENU.2. Select Setup Map > Orientation.3. Select an orientation:Select North Up to show north at the top of the page.Select Track Up to show your current direction of travel at the top of the page.Select Automotive Mode to show a perspective view.Map Setup OptionsFrom the map, press menu, and select Setup Map.Map Orientation—allows you to select how the map appears (page 11).Guidance Text—allows you to select when to show guidance text on the map.Advanced Map SetupAuto Zoom—automatically selects the appropriate zoom level for optimal use on your map. When Off is selected, you must zoom in or out manually.Zoom Levels—map items draw or appear at or below the selected zoom level.Text Size—allows you to select the text size for map items.
DRAFTEdge 800 Owner’s Manual  35NavigationDetail—allows you to select the amount of map data displayed on the device.note: Higher detail settings may cause the map to redraw slowly.Shaded Relief—shows detail relief on the map (if available) or turns off shading.Routing SettingsFrom the main menu, select Setup > Routing.Guidance Method—allows you to select a guidance method for calculating your route.Off Road—calculates point-topoint routes.On Road For Time (requires routable maps)—calculates onroad routes that require minimal time to drive.On Road For Distance (requires routable maps)— calculates on-road routes that are shorter in distance.Calculates Routes for—allows you to select a transportation method in  order to optimize your route.Lock On Road—locks the current location marker on the nearest road, compensating for variances in map position accuracy (requires routable maps).Off Road TransitionsAuto—automatically routes you to the next point.Manual—allows you to select the next point on the route by using the point on the active route page.Distance—routes you to the next point on the route when you are within a specied distance of your current point.Avoidance Setup (requires routable maps)—allows you to select the road
DRAFT36  Edge 800 Owner’s ManualNavigationtype you want to avoid.
DRAFTEdge 800 Owner’s Manual  37Data ManagementData ManagementYou can use the Edge as a USB mass storage device.NOTE: The Edge is not compatible with Windows® 95, 98, Me, or NT. It is also not compatible with Mac® OS 10.3 and earlier. Connecting the USB Cable noticeTo prevent corrosion, thoroughly dry the mini-USB port, the weather cap, and the surrounding area before charging or connecting to a computer.1.  Connect the USB cable to a USB port on your computer. 2.  Pull up the weather cap from the mini-USB port.3.  Plug the small end of the USB cable into the mini-USB port. Your device appears as a removable drive in My Computer on Windows computers and as a mounted volume on Mac computers.Loading FilesAfter you have connected the device to your computer, you can manually load the following les to your Edge: .tcx, .t, and .crs.1.  Browse your computer for the le. 2.  Select Edit > Copy. 3.  Open the “Garmin” drive or volume.4.  Open the “NewFiles” folder.5.  Select Edit > Paste.
DRAFT38  Edge 800 Owner’s ManualData ManagementDeleting FilesnoticeYour device memory contains important system les that should not be deleted. After you have connected the device to your computer, you can manually delete les.1.  Open the Garmin drive or volume. 2.  Select the le.3.  Press the Delete key on your keyboard. Disconnecting the USB CableWhen you are nished managing your les, you can disconnect the USB cable.1.  Complete an action:For Windows computers, click the eject icon   in your system tray.For Mac computers, drag the volume icon to the Trash  . 2.  Unplug the device from your computer.••
DRAFTEdge 800 Owner’s Manual  39SettingsSettingsYou can customize the following settings and features:Data elds (page 39)Bike proles (page 44)Training settings (page 44)System settings (page 46)User Prole settings (page 49)Customizing Your Data FieldsYou can set up custom data elds for three training data pages, the course page, and the map.1.  Select MENU >   > Bike Settings > Data Fields.2.  Select one of the pages.3.  Select the number of data elds you want to see on this page.•••••To turn off an optional page, set the number of data elds to zero.4.  Select the data eld to change it. 5.  Repeat steps 2 through 4 for each page you want to customize. Data FieldsData elds with the * symbol display statute or metric units. Data elds with the ** symbol require an ANT+ sensor.Data Field DescriptionBattery Level The remaining battery power.Cadence ** Revolutions of the crank arm per minute.Cadence – Avg. **Average cadence for the duration of your current ride.Cadence – Lap **Average cadence for the current lap.Calories Amount of total calories burned.
DRAFT40  Edge 800 Owner’s ManualSettingsData Field DescriptionCalories - Fat Amount fat calories burned.Calories to Go Amount of remaining calories when you are using the calorie goal feature.Distance * Distance traveled on the current ride.Dist – Lap * Distance traveled in the current lap.Dist. to Dest. Distance to your nal destination.Dist. to Go The remaining distance to your nal destination or goal.Dist. to Next The remaining distance to the next point on the route.Elevation * Distance above or below sea level. ETA at DestinationThe estimated time of day you will reach your nal destination.Data Field DescriptionETA at Next The estimated time of day you will reach the next waypoint on the route.GPS Accuracy *The margin of error for your exact location. For example, your GPS location is accurate to within +/- 12 feet.GPS Signal StrengthThe strength of theGPS satellite signal.Grade Calculation of rise over run. For example, if for every 10 feet you climb (elevation) you travel 200 feet (distance), your grade is 5%.Heading The direction you are moving.Heart Rate ** Heart rate in beats per minute (bpm).
DRAFTEdge 800 Owner’s Manual  41SettingsData Field DescriptionHR – %HRR **Percentage of heart rate reserve (maximum heart rate minus resting heart rate).HR – %Max. ** Percentage of maximum heart rate. HR – Avg. ** Average heart rate for the ride.HR – Avg. %HRR **Average percentage of heart rate reserve (maximum heart rate minus resting heart rate) for the run.HR – Avg. %Max. **Average percentage of maximum heart rate for the run.HR – Lap ** Average heart rate in the current lap. HR – Lap %HRR **Average percentage of heart rate reserve (maximum heart rate minus resting heart rate) for the lap.Data Field DescriptionHR – Lap %Max. **Average percentage of maximum heart rate for the lap.HR Graph ** Line graph showing your current heart rate zone (1 to 5).HR to Go ** The amount you are above or below the target heart rate or zone? HR Zone ** Current range of heart rate (1 to 5). The default zones are based on your user prole, maximum heart rate, and resting heart rate.Laps Number of laps completed.Odometer A running tally of distance traveled for all trips.Power ** Current power output in watts.
DRAFT42  Edge 800 Owner’s ManualSettingsData Field DescriptionPower - %FTP **Current power output in % FTP (functional threshold power).Power - 30s Avg. **The 30-second moving average of power output.Power - 3s Avg. **The three-second moving average of power output.Power – Avg. **Average power output for the duration of your current ride.Power – kJ ** Total (cumulative) amount of power output in kilojoules.Power – Lap **Average power output in the current lap.Power – Max. **Top power achieved during the current ride.Power – Watts/kg **Amount of power output in watts per kilogram?Data Field DescriptionPower Zone **Current range of power output (1 to 7) based on your FTP or custom settings. Speed * Current speed.Speed – Avg. *Average speed for the ride.Speed – Lap * Average speed in the current lap.Speed – Maximum *Top speed achieved during the current ride.Sunrise The time of sunrise based on your GPS position.Sunset The time of sunset based on your GPS position.
DRAFTEdge 800 Owner’s Manual  43SettingsData Field DescriptionTemperature * Current temperature in Fahrenheit or Celsius.Note: The Edge may display temperature readings that are higher than the actual air temperature if the Edge is placed in direct sunlight or held in your hand. Also, the Edge will take some time to adjust to signicant changes in temperature.Time Stopwatch time.Time – Avg. LapAverage time to complete the laps so far.Time - ElapsedTotal time recorded from pressing START to RESET.Time – Lap Amount of time in the current lap.Data Field DescriptionTime of Day Current time of day based on your time settings (format, time zone, and daylight saving time).Time to Dest. The estimated time needed to reach your nal destination.Time to Go The remaining timeTotal Ascent * Total elevation gain for the current ride.Total Descent *Total elevation lost for the current ride.Vertical Speed *Rate of ascent or descent in feet/meters per hour.VS – 30s Avg. *The 30-second moving average of vertical speed.Waypoint at Dest.The last point on a route to your destination.Waypoint at NextThe next point on your route.
DRAFT44  Edge 800 Owner’s ManualSettingsUpdating Your Bike ProleYou can customize three bike proles. The Edge uses the bike weight, the odometer value, and the wheel size to calculate accurate ride data.1.  Select MENU >   > Bike Settings > Bike Proles.2.  Select a bike.3.  Select Bike Details.4.  Enter a name for the bike prole, the bike weight, and the odometer value.5.  If you are using a speed and cadence sensor, select Wheel Size. Select Automatic to calculate your wheel size using GPS distance.Select Custom to enter your wheel size. For a table of wheel sizes and circumferences, see page 56.••Training Settings Marking Laps by PositionYou can use Auto Lap® to automatically mark the lap at a specic position. This feature is helpful for comparing your performance over different parts of a ride (for example, a long climb or training sprints). During courses, use the By Position option to trigger laps at all of the lap positions saved in the course.1.  Select MENU >   > Bike Settings > Auto Lap > Auto Lap Trigger. 2.  Select By Position.3.  Select Lap At.4.  Select an option:Select Lap Press Only to trigger the lap counter each time you press LAP and each time you pass any of those locations again.•
DRAFTEdge 800 Owner’s Manual  45SettingsSelect Start And Lap to trigger the lap counter at the GPS location where you press START and at any location during the ride where you press LAP.Select Mark And Lap to trigger the lap counter at a specic GPS location marked before the ride and at any location during the ride where you press LAP.5.  If necessary, customize the lap data elds (page 39).Marking Laps by DistanceYou can use Auto Lap to automatically mark the lap at a specic distance. This feature is helpful for comparing your performance over different parts of a ride (for example, every 10 miles or 40 kilometers).1.  Select MENU >   > Bike Settings > Auto Lap > Auto Lap Trigger. ••2.  Select By Distance.3.  Select Lap At. 4.  Enter a value.5.  If necessary, customize the lap data elds (page 39).Using Auto PauseYou can use Auto Pause® to pause the timer automatically when you stop moving or when your speed drops below a specied value. This feature is helpful if your ride includes stop lights or other places where you need to slow down or stop.NOTE: The paused time is not saved with your history data.1.  Select MENU >   > Bike Settings > Auto Pause > Auto Pause Mode. 2.  Select an option:
DRAFT46  Edge 800 Owner’s ManualSettingsSelect When Stopped to pause the timer automatically when you stop moving.Select Custom Speed to pause the timer automatically when your speed drops below a specied value.3.  If necessary, customize optional time data elds (see page 39). To view the entire time (from pressing START to RESET), select the Time - Elapsed data eld. Using Auto ScrollYou can use the auto scroll feature to automatically cycle through all of the training data pages while the timer is running.1.  Select MENU >   > Bike Settings > Auto Scroll > Auto Scroll Speed.2.  Select a display speed: Slow, Medium, or Fast.••Changing the Start NoticeThis feature automatically detects when your Edge has acquired satellites and is moving. It is a reminder to start the timer so you can record your ride data. 1.  Select MENU >   > Bike Settings > Start Notice > Start Notice Mode.2.  Select an option:Select Once.Select Repeat to change the amount of time to delay the reminder.System SettingsGPS Settings (page 47)Display Settings (page 48)Map Settings (see Navigation, page xx)Route Settings (see Navigation, page xx)••••••
DRAFTEdge 800 Owner’s Manual  47SettingsData Recording Settings (see History, page xx)Unit Settings (page 48)System Setup (page 48)Conguration Settings (page 49)Weight Scale Settings (page 49)GPS SettingsTraining Indoors1.  Select MENU >   > System > GPS > GPS Mode.2.  Select Off.When GPS is off, speed and distance data are not available unless you have an optional sensor that sends speed and distance data to the Edge (such as the GSC 10. The next time you turn on the Edge, it will search for satellite signals again. Setting Your Current ElevationIf you have accurate elevation data for your current location, you can •••••manually calibrate the altimeter on your device.1.  Select MENU >   > System > GPS > Set Elevation.2.  Enter the elevation.Satellite PageThe satellite page shows your current GPS satellite information. Select MENU >   > System > GPS > View Satellites.On the satellite page, GPS accuracy appears at the bottom of the page. The green bars represent the strength of each satellite signal received (the number of the satellite appears below each bar).For more information about GPS, go to www.garmin.com/aboutGPS.
DRAFT48  Edge 800 Owner’s ManualSettingsDisplay SettingsSelect MENU >   > System > Display.Backlight Timeout—see page 54.Background—sets the background image (wallpaper).Screen Capture—allows you to take screen captures on the device.Screen Calibration—see page xx.Customizing the Unit SettingsYou can customize units of measure for distance and speed, elevation, temperature, weight, and position format.1.  Select MENU >   > System > Units.2.  Select a setting.3.  Select a unit for the setting.••••System SetupSelect MENU >   > System > System Setup.Language—sets the device language.Tones—sets the audible tones.Time Format—sets the time format to 12 hour or 24 hour.Auto Power Down—see page xx.Time ZonesEach time you turn on the Edge and acquire satellites, the Edge automatically detects your time zone and the current time of day. ••••
DRAFTEdge 800 Owner’s Manual  49SettingsChanging the Conguration SettingsYou can modify all of the settings you congured in the initial setup. 1.  Select MENU >   > System > Initial Setup > Yes.2.  Turn off the device.3.  Turn on the device.4.  Follow the on-screen instructions. WeightWhy is this section in the System settings? This is for a wireless (ANT) weight scale. This feature is not complete at this time.User Prole SettingsYou can update your gender, age, weight, height, and activity class settings. The Edge uses this information to calculate accurate ride data. Select MENU >   > User Prole.About CaloriesCalorie expenditure and heart rate analysis technology is provided and supported by Firstbeat Technologies Ltd. For more information, go to  www.rstbeattechnologies.com.
DRAFT50  Edge 800 Owner’s ManualSettings
DRAFTEdge 800 Owner’s Manual  51AppendixAppendixRegistering Your DeviceHelp us better support you by completing our online registration today:Go to http://my.garmin.com. Keep the original sales receipt, or a photocopy, in a safe place.About the EdgeTo display important software information and your unit ID, select MENU >   > About Edge.••Updating the Software1.  Select an option:Use WebUpdater. Go to  www.garmin.com/products /webupdater.Use Garmin Connect. Go to www.garminconnect.com.2.  Follow the on-screen instructions. Contacting Garmin Product SupportContact Garmin Product Support if you have any questions about this product: In the USA, go to www.garmin .com/support, or contact Garmin USA by phone at (913) 397.8200 or (800) 800.1020.In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.In Europe, go to www.garmin.com /support and click Contact Support for in-country support •••••
DRAFT52  Edge 800 Owner’s ManualAppendixinformation, or contact Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241.Using the BacklightPress LIGHT to turn on the backlight. Press any button to extend the backlight another 15 seconds. NOTE: Alerts and messages also activate the backlight. Change the backlight settings  (page 49).Buying Optional AccessoriesGo to http://buy.garmin.com, or contact your Garmin dealer for information about optional accessories and replacement parts. •••Caring for Your DevicenoticeDo not store the device where prolonged exposure to extreme temperatures can occur, because it can cause permanent damage. Never use a hard or sharp object to operate the touchscreen, or damage may result. Avoid chemical cleaners and solvents that can damage plastic components. Cleaning the Device1.  Use a cloth dampened with a mild detergent solution.2.  Wipe it dry. Cleaning the Screen1.  Use a soft, clean, lint-free cloth.2.  If necessary, use water, isopropyl alcohol, or eyeglass lens cleaner.
DRAFTEdge 800 Owner’s Manual  53Appendix3.  Apply the liquid to the cloth, and gently wipe the screen with the cloth.SpecicationsnoticeThe Edge is waterproof to IEC Standard 60529 IPX7. It can withstand immersion in 1 meter of water for 30 minutes. Prolonged submersion can cause damage to the device. After submersion, be certain to wipe dry and air dry the device before using or charging. Edge SpecicationsBattery type 1000 mAh rechargeable, built-in, lithium-ion batteryBattery life 15 hours, typical usageOptional external battery (accessory)20 hoursEdge SpecicationsOperating temperature rangeFrom -4°F to 140°F (from -20°C to 60°C)Charging temperature rangeFrom 32°F to 113°F (from 0°C to 45°C)Bands  (O-rings) for the Edge MountTwo sizes:1.3 × 1.5 × 0.9 in. AS568-1251.7 × 1.9 × 0.9 in. AS568-131NOTE: Use EPDM (Ethylene Propylene Diene Monomer) replacement bands only. Go to http://buy .garmin.com, or contact your Garmin dealer.••
DRAFT54  Edge 800 Owner’s ManualAppendixHeart Rate Monitor SpecicationsWater resistance32.9 ft. (10 m)Battery User-replaceable CR2032 (3 volts) Perchlorate Material – special handling may apply. See www.dtsc.ca.gov /hazardouswaste /perchlorate.Battery life Approximately 3 years (1 hour per day)Operating temperatureFrom 14°F to 122°F (from -10°C to 50°C)NOTE: In cold conditions, wear appropriate clothing to keep the heart rate monitor near your body temperature.Radio frequency/protocol2.4 GHz wireless communications protocolGSC 10 SpecicationsWater resistanceIPX7Battery User-replaceable CR2032 (3 volts) Perchlorate Material – special handling may apply. See www.dtsc.ca.gov /hazardouswaste /perchlorate.Battery life Approximately 1.4 years (1 hour per day)Operating temperatureFrom 5°F to 158°F (from -15°C to 70°C)Radio frequency/protocol2.4 GHz wireless communications protocolEdge Battery InformationMaximizing Battery LifeDecreasing the BacklightExtensive use of screen backlighting can signicantly reduce battery life. SS?
DRAFTEdge 800 Owner’s Manual  55AppendixYou can adjust the backlight brightness and decrease the backlight timeout to maximize battery power.1.  Press Power to open the status page.2. Adjust the brightness.Adjusting the Backlight TimeoutFrom the main menu, select Setup > Display > Backlight Timeout.Turning On the Auto Power Down FeatureThis feature automatically turns the Edge off after 15 minutes of inactivity. 1.  Select MENU >   > System > System Setup > Auto Power Down.2.  Select On.External Battery Accessory?Charging the Edgenotice To prevent corrosion, thoroughly dry the mini-USB port, the weather cap, and the surrounding area before charging or connecting to a computer.1.  Plug the AC charger into a standard wall outlet. 2.  Pull up the weather cap ➊ from the mini-USB port ➋.➊➋
DRAFT56  Edge 800 Owner’s ManualAppendix3.  Plug the small end of the AC charger into the mini-USB port.To connect the device to your computer using the USB cable, see page 31. 4.  Charge the device for at least three hours before you begin using it. A fully charged battery can run for up to 15 hours before it must be recharged.Wheel Size and CircumferenceThe wheel size is marked on both sides of the tire. To modify your bike prole, see page 44.Wheel Size L (mm)12 × 1.75 93514 × 1.5 102014 × 1.75 105516 × 1.5 1185Wheel Size L (mm)16 × 1.75 119518 × 1.5 134018 × 1.75 135020 × 1.75 151520 × 1-3/8 161522 × 1-3/8 177022 × 1-1/2 178524 × 1 175324 × 3/4 Tubular 178524 × 1-1/8 179524 × 1-1/4 190524 × 1.75 189024 × 2.00 192524 × 2.125 196526 × 7/8 192026 × 1(59) 191326 × 1(65) 195226 × 1.25 1953
Wheel Size L (mm)26 × 1-1/8 197026 × 1-3/8 206826 × 1-1/2 210026 × 1.40 200526 × 1.50 201026 × 1.75 202326 × 1.95 205026 × 2.00 205526 × 2.10 206826 × 2.125 207026 × 2.35 208326 × 3.00 217027 × 1 214527 × 1-1/8 215527 × 1-1/4 216127 × 1-3/8 2169650 × 35A 2090650 × 38A 2125Wheel Size L (mm)650 × 38B 2105700 × 18C 2070700 × 19C 2080700 × 20C 2086700 × 23C 2096700 × 25C 2105700 × 28C 2136700 × 30C 2170700 × 32C 2155700C Tubular 2130700 × 35C 2168700 × 38C 2180700 × 40C 2200
DRAFT58  Edge 800 Owner’s ManualAppendixTroubleshootingProblem SolutionThe buttons do not respond. How do I reset the Edge?Press and hold POWER, MENU, and RESET simultaneously to reset the Edge. NOTE: This does not erase any of your data or settings. I want to clear all the user data from my Edge.1.  Turn off the Edge.2.  Press and hold POWER and RESET until the message appears.3.  Select Yes to clear all user data. NOTE: This deletes all user-entered information, but it does not delete your history.My Edge does not acquire satellite signals.1.  Take your Edge out of parking garages and away from tall buildings and trees. 2.  Turn on the Edge.3.  Remain stationary for several minutes.The battery gauge does not seem accurate.Allow the Edge battery to fully discharge, and then fully charge the battery (without interrupting the charge cycle).The battery does not last long.Reduce the backlight time (page 49).How do I know my Edge is in USB mass storage mode?You should see a new removable disk drive in My Computer on Windows computers and a mounted volume on Mac computers.
DRAFTEdge 800 Owner’s Manual  59AppendixProblem SolutionMy Edge is connected to the computer, but it will not go into mass storage mode. You may have loaded a corrupted le. 1.  Disconnect the Edge from your computer. 2.  Turn off the Edge.3.  Press and hold MENU while you connect the Edge to your computer.   Continue pressing MENU for 10 seconds or until the Edge goes into mass storage mode. I cannot see any new removable drives in my list of drives.If you have several network drives mapped on your computer, Windows may have trouble assigning drive letters to your Garmin drives. See the Help le for your operating system to learn how to assign drive letters.My course le was renamed.You can load .tcx and .crs les to the Edge. When you select the course for any reason, the le is converted to a .t course le. Some of my data is missing from myEdge history.When the Edge memory is full, it will no longer record data. Transfer data to your computer regularly to avoid losing data.I need to replace the bands for the mount.Go to http://buy.garmin.com, or contact your Garmin dealer. Purchase bands made of EPDM only.
DRAFT60  Edge 800 Owner’s ManualAppendixTips and ShortcutsQuickly change a data eldOn an active data page, touch and hold the data eld until it turns blue. When you lift up your nger, you are prompted to select a new data eld.Switch to another bike 1.  Select MENU >   > Bike Settings > Bike Proles. 2.  Select the bike you want to use.Or Do it from the status page. Kenney said they are trying to have automatic bike detection?Calibrate the touchscreen Select MENU >   > System > Display > Screen Calibration.
DRAFTEdge 800 Owner’s Manual  61IndexIndexAaccessories  48acquiring satellite signals  6, 54activity classes  43, 53alerts  9ANT+ sensors  6, 20–32troubleshooting  31Auto Lap  10, 11Auto Pause  12Auto Scroll  12Bbacklight  41, 48bands  3, 49, 55battery  54charging  1conserving  41bike mount  2, 49bike proles  43, 44buttons  5Ccadencealerts  10data elds  38training  28calibrating your power meter  30calorie alerts  9calories  38charging the Edge  1, 2clearing user data  54courses  13–19loading  35custom data elds  37–40Ddata elds  38–41data recording  34data uploading  35deletingles  36history  34distancedata elds  38distance alerts  9downloading software  7Eelevationdata elds  38, 41points  46Flesdeleting  36loading  35GGarmin Connect  7, 8, 13, 16, 17, 19, 33Garmin Product Support  47Garmin Training Center  7, 8, 13, 16, 17, 19, 33GPSaccuracy  38satellite page  45settings  45grade  38GSC 10  28, 50battery  29installing  25
DRAFTIndex62  Edge 800 Owner’s ManualHheart ratealerts  9data elds  38settings  22zones  22–24heart rate monitorbattery  24putting on  21specications  50using  22history  33, 55deleting  34transferring  8viewing  33Iicons  4initial setup  4, 42installing the Edge  2Llithium-ion battery  1, 48loading les  35Mmount  2, 49OO-rings (bands)  49Ppairing ANT+ sensors  6, 20paused time  12pedal magnet  26poweralerts  10data elds  39data recording  34meter  30zones  30product registration  47product support  47prolebike  43user  43Rrecording history  7registration  47replacement parts  48resetting Edge  54Ssafety information  1satellite signals  45acquiring  6saving your data  7, 19sensors, pairing  6settings  37smart recording  34softwaredownloads  7updates  47version  47specications  48speeddata elds  40zones  44speed and cadence sensor  50spoke magnet  26start notice message  42, 44switching bikes  44Ttechnical specications  48
DRAFTEdge 800 Owner’s Manual  63Indextimealerts  9data elds  40zones and formats  42timer  7, 33tire size  43tones  41trainingindoors  45training with your Edge  9transferring data  8, 35troubleshooting  31, 54Uunit ID  47updating software  47USB  2, 8, 35, 54user prole  43Vvertical speed  41Virtual Partner  13, 15Wweather cap  2, 8, 35wheel sizes  43, 51workouts  16–19loading  35Zzonesheart rate  22–24power  30
DRAFTFor the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com.© 2010 Garmin Ltd. or its subsidiariesGarmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USAGarmin (Europe) Ltd. Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UKGarmin Corporation No. 68, Jangshu 2nd Road, Sijhih, Taipei County, TaiwanJuly 2010  Part Number 190-011267-00 Rev. A  Printed in Taiwan

Navigation menu