Garmin 01539 Low Power Communications Transmitter User Manual 2

Garmin International Inc Low Power Communications Transmitter 2

Contents

User Manual 2

foretrex® 301 and 401owner’s manualPERSONAL NAVIGATOR®
© 2009 Garmin Ltd. or its subsidiariesGarmin International, Inc. 1200 East 151st Street,  Olathe, Kansas 66062, USA Tel. (913) 397.8200 or  (800) 800.1020 Fax (913) 397.8282Garmin (Europe) Ltd. Liberty House Hounsdown Business Park,  Southampton, Hampshire,  SO40 9LR UK Tel. +44 (0) 870.8501241  (outside the UK)  0808 2380000 (within the UK) Fax +44 (0) 870.8501251Garmin Corporation  No. 68, Jangshu 2nd Road,  Shijr, Taipei County, Taiwan Tel. 886/2.2642.9199 Fax 886/2.2642.9099May 2009  Part Number 190-01068-00  Printed in TaiwanAll rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. Visit the Garmin Web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products.Garmin®, Foretrex®, and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. GSC™ 10 is a trademark of Garmin Ltd. or it’s subsidiaries. These trademarks may not be used without the express permission of Garmin. Windows® is a registered trademark of Microsoft Corporation in the United States and other countries. Mac® is a registered trademark of Apple Computer, Inc. Other trademarks and trade names are those of their respective owners.
Foretrex 301/401 Owner’s Manual  iIntroductionIntroduction  See the Important Safety and Product Information guide in the product box for product warnings and other important information.Manual ConventionsWhen you are instructed to “press” something, use the buttons on the unit. Press   to “select” something in a list, and then press enter.The small arrows (>) used in the text indicate that you should select a series of items in order, for example, “Press page > enter > select TRACKS.” Product RegistrationHelp us better support you by completing our online registration today. Go to http://my.garmin.com. Keep the original sales receipt, or a photocopy, in a safe place.Contact GarminContact Garmin Product Support if you have any questions while using your Foretrex. In the USA, go to www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200 or (800) 800.1020.In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.In Europe, go to www.garmin.com /support and click Contact Support for in-country support information, or contact Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241.
ii  Foretrex 301/401 Owner’s ManualIntroductionForetrex® FeaturesFeatures Foretrex 301Foretrex 401Altimeter No YesBarometer No YesCadence (optional accessory required)No YesElectronic compass No YesHeart rate (optional accessory required)No YesTimer Yes YesWaterproof Yes YesWireless transfer No YesOptional AccessoriesFor a list of available accessories and maps, refer to the Garmin Web site at  http://buy.garmin.com.
Foretrex 301/401 Owner’s Manual  iiiIntroductionTable of ContentsIntroduction .......................... iManual Conventions ....................iProduct Registration ....................iContact Garmin ...........................iOptional Accessories ..................iiForetrex® Features .....................iiGetting Started .................... 1Buttons ...................................... 2Installing Batteries ..................... 2Turning On Your Foretrex .......... 3Acquiring GPS Satellite  Signals .................................... 3Using the Backlight .................... 3Using the Main Pages ........ 4Map Page .................................. 5Compass Page .......................... 6Elevation Page .......................... 7Trip Computer ............................ 7Main Menu ................................. 7Waypoints, Tracks, and Routes ................................. 8Waypoints .................................. 8Editing Waypoints ...................... 8Hunt and Fish .......................... 10Sun and Moon ......................... 10Recording your Tracks............. 10Creating and Navigating  Routes ....................................11Settings ............................. 12Map Menu Options .................. 12Compass Menu Options .......... 12Elevation Menu Options .......... 13Trip Computer Options ............ 13Main Menu Options ................. 13Data Field Options ................... 15Timer .................................. 20Timer Options .......................... 20
iv  Foretrex 301/401 Owner’s ManualIntroductionGPS .................................... 21Setting GPS Mode ................... 21Satellite Reception................... 21Signal Strength ........................ 21Sky View .................................. 21Appendix ........................... 22Pairing the Foretrex 401 .......... 22Wireless Data Transfers .......... 23Connecting Your Foretrex  to a Computer ....................... 24Jumpmaster ............................. 25Storing the Foretrex ................. 25Battery Information .................. 25Optimizing Battery Life ............ 26Resetting the Foretrex ............. 26Clearing User Data .................. 26Replacing the Wristband ......... 27Cleaning the Unit and  Wristband .............................. 27Specications .......................... 28Software License  Agreement ............................ 29Declaration of Conformity  (DoC) .................................... 29FCC Compliance ..................... 30Index .................................. 31
Foretrex 301/401 Owner’s Manual  1Getting StartedGetting StartedMini-USB  (under  weather cap) page/gotoenter/mark up/downGPS antennaPower/backlightBattery cover  (serial  number inside)
2  Foretrex 301/401 Owner’s ManualGetting StartedButtonspower Press and hold to turn the Foretrex on and off. Press to turn the backlight on and off.page/gotoPress to view and navigate through the menus. Press to exit a menu or a page.Press and hold to navigate to a specic destination or waypoint.enter/markPress to select options and to acknowledge messages.Press and hold to mark a waypoint.Press to access an options menu when on a main page.•••••••• (up/down)Press to scroll through menus and pages. Press to select options on menus and pages.Press to zoom out ( ) and  in ( ) on the map.Installing Batteries1.  Carefully lift up on the battery door until it comes off.2.  Insert the batteries, observing polarity.3.  Replace the battery cover.•••
Foretrex 301/401 Owner’s Manual  3Getting Started NOTE: Remove the batteries when you do not plan to use the Foretrex for several months. When you remove the batteries, stored data is not lost.Turning On Your ForetrexPress and hold   to turn the Foretrex on. The rst time you turn on your Foretrex you are prompted to choose a language.Acquiring GPS Satellite SignalsBefore the Foretrex can nd your current location and navigate a route, you must acquire GPS signals.1.  Go outdoors to an open area, away from tall buildings and trees.2.  Turn on the Foretrex and hold it level. Acquiring satellite signals can take a few minutes. The   ashes while the Foretrex determines your location. When satellites are acquired, the   remains solid.Using the BacklightWhile the Foretrex is on, press and quickly release  . The backlight stays on for 30 seconds. Press   again to turn off the backlight before the automatic light timeout.To adjust the backlight time:1.  From the main menu, select SETUP > DISPLAY > LIGHT TIMEOUT.  2.  Use   to set the amount of time the backlight stays on.
4  Foretrex 301/401 Owner’s ManualUsing the Main PagesUsing the Main PagesAll of the information needed to operate the Foretrex is found on the following ve main pages: the map page, the compass page, the elevation page (401 only), the trip computer page, and the main menu. Press the page button to navigate through the main pages. Press enter to access the option menus for these pages. Elevation page (401 only)Trip computerMain menuCompass pageMap page
Foretrex 301/401 Owner’s Manual  5Using the Main PagesMap PageMap pageHeading indicatorPosition iconYour position on the map is represented by  . As you travel, the position icon moves and leaves a track log (trail). Waypoint names and symbols are also shown on the map.  NOTE: Press   to zoom out or  to zoom in.The Foretrex automatically rotates the map as you move, so that waypoints ahead of you always appear above your position. The heading indicator shows the direction you are heading. To view the map with north up:1.   From the map page, press enter.  2.  Select MAP DETAIL > MAP ORIENTATION > NORTH UP.To clear a track log:1.  From the map page, press enter.2.  Select CLEAR TRACK LOG > YES.To measure distance:1.  From the map page, press enter.2.  Select MEASURE DISTANCE3.  Select the FROM eld then select a starting waypoint from the waypoint list. 4.  Select the TO eld then select an ending waypoint from the waypoint list.5.  Select the ESTIMATED SPEED eld. Use   to select elds, and press enter to edit the speed.
6  Foretrex 301/401 Owner’s ManualUsing the Main PagesThe total distance between the two points and the estimated travel time appears at the bottom of the page. Compass PageThe compass page guides you to your destination by displaying a compass and a bearing pointer.When you are navigating to a specic location, the compass page displays the name of the location, two data elds that display distance to nal destination and speed (by default), and a direction arrow in the compass ring. Follow the arrow to navigate. The electronic compass (used in the 401) is similar to a magnetic compass when you are stationary or walking. If you maintain a higher speed, such as traveling in automobile, the compass uses GPS signals to determine your direction.  NOTE: Hold the compass level when navigating to ensure maximum accuracy.To calibrate the electric compass:1. From the compass page, press enter. 2. Select CALIBRATE.3. Follow the on-screen instructions.
Foretrex 301/401 Owner’s Manual  7Using the Main PagesElevation Page (401 only)The elevation page shows your elevation. Press   to zoom out or   to zoom in. To calibrate the barometric altimeter: NOTE: The barometric altimeter is available only on the Foretrex 401.1.  From the main menu, select SET UP > ALTIMETER > CALIBRATE.2.  Follow the on-screen instructions.Trip ComputerThe trip computer displays your current speed, average speed, maximum speed, trip odometer, and other helpful statistics. Use   to scroll to see more elds.To customize data elds, press enter. See page 15 for more information.Main MenuThe main menu gives you access to setup screens including waypoints, tracks, and routes. The main menu displays the current date and time along the top of the screen. Use  to select from the list of menu options.
8  Foretrex 301/401 Owner’s ManualWaypoints, Tracks, and RoutesWaypoints, Tracks, and RoutesWaypointsWaypoints are locations you record and store in the Foretrex.1.  Press and hold mark.2.  Select OK.To navigate to a waypoint:1.  Press and hold goto.2.  Select the waypoint from the list.Editing WaypointsWaypoint pageAfter you have marked a waypoint, you can edit the name, the symbol, the elevation, and the latitude/longitude from the waypoint page.  NOTE: Use   to select the letters and numbers. Press enter to edit.To edit existing waypoints:1.  Select > WAYPOINTS > LIST ALL. 2.  Select the waypoint you want to edit.
Foretrex 301/401 Owner’s Manual  9Waypoints, Tracks, and RoutesTo change the symbol:1.  From the waypoint page, select the waypoint symbol.2.  Select a new symbol from the list. To change the name:1.  From the waypoint page, select the name. The EDIT WAYPOINT NAME page appears. 2.  Press enter to access the character menu. Select a character from the list.3.  Press enter to advance to the next character. 4.  Repeat steps 2 and 3 as necessary.To change the elevation:1.  From the waypoint page, select the elevation. The ENTER CORRECT ELEVATION page appears.2.  Press enter to access the number menu. Select a number from the list.3.  Press enter to advance to the next eld.4.  Repeat steps 2 and 3 as necessary.5.  Select OK to save and exit.To change the latitude/longitude:1.  From the waypoint page, select the latitude/longitude eld. The EDIT LOCATION page appears.2.  Select a number from the list. NOTE: To change the position format, see page 14.To delete a waypoint:1.  Select > WAYPOINTS > LIST ALL. 2.  Use   or enter to select the waypoint you want to delete.3.  Select DELETE > YES.
10  Foretrex 301/401 Owner’s ManualWaypoints, Tracks, and RoutesHunt and FishThe hunting and shing almanac provides the predicted best dates and times for hunting and shing at your current location.To view the hunt and sh page:1.  From the main menu, select > WAYPOINTS > LIST ALL.2.  Select the waypoint you want to view.3.  Select OPTIONS > HUNT/FISH. NOTE: Press enter to view the hunting and shing information for a different date.Sun and MoonThe Sun and Moon page shows sunrise time, sunset time, moonrise time, moonset time, and moon phase for a specied date.To view the sun and moon page:1.  From the main menu, select > WAYPOINTS > LIST ALL.2.  Select the waypoint you want to view.3.  Select OPTIONS > SUN/MOON. NOTE: Press enter to view the sun and moon information for a different date.Recording your TracksThe Foretrex records a track log while you are moving. You can save these tracks and navigate to them at another time.1.  From the main menu, select TRACKS.2.  Select SAVE TRACK.3  Use   and enter to set a beginning point and an ending point.4.  Press enter to name the track. Follow the on-screen instructions.
Foretrex 301/401 Owner’s Manual  11Waypoints, Tracks, and RoutesTo clear current track:  From the tracks menu, select CLEAR TRACK > YES.To navigate to a saved track:1.  From the tracks menu, select LIST SAVED.2.  Select the track.3.  Select NAVIGATE.Creating and Navigating Routes1.  From the main menu, select ROUTES > CREATE NEW.2.  Press enter to access your saved waypoints.3.  Select a waypoint for the rst eld. Repeat in each eld until the route is complete.4.  Select FOLLOW.
12  Foretrex 301/401 Owner’s ManualSettingsSettingsMap Menu OptionsOn the map page, press enter to access the map menu.PAN TRACK LOG—use   to pan. Move the pointer to any point along the track. Press enter to go to a waypoint, mark a waypoint, or zoom in or out.CLEAR TRACK LOG—delete the recorded track log.MEASURE DISTANCE—measure the distance between two waypoints.  See page 5 for instructions on measuring distance. MAP DETAIL—set map preferences:MAP ORIENTATION—select how the map is shown on the page. NORTH UP shows North at the top of the page. TRACK UP shows your current direction of travel at the top of the page.TRACKS—show or hide tracks on the map.WAYPOINTS—show or hide waypoints on the map.STOP NAVIGATION—stop the current route.Compass Menu OptionsOn the compass page, press enter to access the compass menu.CALIBRATE—hold the Foretrex level and slowly turn in two full circles in the same direction.•••
Foretrex 301/401 Owner’s Manual  13SettingsCHANGE FIELDS—change the data elds on the compass page. See page 15 for more information on changing data elds. Elevation Menu OptionsOn the elevation page, press enter to access the elevation menu.PLOT— select to plot over time or distance.ZOOM—select to change the elevation scale.VIEW POINTS—view the data points on the elevation page.Trip Computer OptionsOn the trip computer page, press enter to access the trip computer menu.CHANGE FIELDS—change the data elds on the trip computer page. See page 15 for more information on changing data elds.RESET TRIP DATA—select YES to reset the trip data and the altimeter data.Main Menu OptionsWAYPOINTS—create a new waypoint, list all waypoints, or view the nearest waypoint to your location. See page 8 for more information.TRACKS—manage your saved tracks. Here you can clear the track log, pan and trackback, save a track, list saved tracks, or delete all saved tracks.ROUTES—create a new route, list all routes, delete all routes.SETUP—customize settings for the Foretrex.
14  Foretrex 301/401 Owner’s ManualSettingsTIME—select a 12-hour or 24-hour format, and the time zone for your location. Select YES to use daylight saving time, NO to ignore it, or AUTO to automatically turn daylight saving time on and off.  Select YES to use automatic time zones, NO change the time zone manually, or AUTO to automatically update your time zone.TIMER—show or hide timer page and set timer preferences. See page 20.DISPLAY—adjust backlight and display contrast. UNITS—set position format and map datum. Select units of measurement for distance/speed, elevation, vertical speed, and pressure.••••HEADING—customize compass settings and calibrate the compass.SYSTEM—set preferences for the GPS mode, the beeper, the battery, the language, and the interface. You can also enter owner information, such as your name, and set it to appear when the unit powers on.TRACKS—set track preferences.ROUTES—select auto or distance for route leg transition.MAP—select NORTH UP or TRACK UP and turn auto zoom off or on. You can also select bearing or course for the go to line.ALTIMETER—turn auto calibration on or off.••••••
Foretrex 301/401 Owner’s Manual  15SettingsRESET—reset trip data, delete all waypoints, or restore to factory defaults.ABOUT FORETREX—view the version software and the GPS software version.CONNECT—connect to compatible Garmin devices, compatible accessories, or receive data wirelessly.GPS—view the satellite signal strength or the satellite sky view. See page 21.JUMPMASTER—enter the Jumpmaster setting. Set the jump type and information. See page 25.••Data Field OptionsThe following table lists all of the Foretrex data elds and descriptions.*Only available on the Foretrex 401.Data Field DescriptionAMB PRESS* (ambient pressure)The uncalibrated current pressure.AVG ASCENT The average vertical distance of ascent.AVG DESCNT (average descent)The average vertical distance of descent.BAROMETER* The calibrated current pressure.BEARING The direction from your current location to a destination.
16  Foretrex 301/401 Owner’s ManualSettingsData Field DescriptionCADENCE* (GSC™ 10 required)Revolutions of the crank arm or strides per minute.COURSE The direction from your starting location to a destination.ELEVATION The altitude above or below sea level.FINAL DEST (destination)The last waypoint on your route.FINAL DIST (distance)The remaining distance to your nal destination.FINAL ETA(estimated time of arrival)The estimated time of day you will reach your nal destination.Data Field DescriptionFINAL ETE (estimated time en route)The estimated time needed to reach your nal destination.GLIDE RATIO* The ratio of horizontal distance traveled to the change in vertical distance.GR DEST* (glide ratio destination)The glide ratio required to descend from your present position and elevation to the destination elevation.HEADING Your moving direction.HEART RATE*  (heart rate monitor required)Heart rate in beats per minute (bmp).
Foretrex 301/401 Owner’s Manual  17SettingsData Field DescriptionMAX ASCENT*  The maximum ascent rate in feet/meter per minute.MAX DESCNT* (maximum descent)The maximum descent rate in feet/meter per minute.MAX ELEVTN (maximum elevation)The highest elevation reached.MAX SPEED The maximum speed.MIN ELEVTN (minimum elevation)The lowest elevation reached.MOV’N AVG (moving average)Average speed of the unit while moving.Data Field DescriptionMOV’N TIME (moving time)A running tally of movement time elapsed since the last reset.NEXT DEST (destination)The next waypoint on your route.NEXT DIST (distance)The remaining distance to the next waypoint on the your route.NEXT ETA (estimated time of arrival)The estimated time of day you will reach the next waypoint on the route.NEXT ETE (estimated time en route)The estimated time needed until you reach the next waypoint on the route.
18  Foretrex 301/401 Owner’s ManualSettingsData Field DescriptionODOMETER A running tally of distance traveled, based upon the distance between second-by-second position readings.OFF COURSE The distance (left or right) you are from the original course (path of travel).OVER’L SPD (overall speed)Your average speed.SPEED Display rate of current speed.STOP TIME Time spent stopped.Data Field DescriptionSUNRISE Time of sunrise based on yourGPS position.SUNSET Time of sunset based on yourGPS position.TIME Current time of day based on your time settings (format, time zone, and daylight saving time).TO COURSE The direction you must travel  to return to the route.TOT ASCENT (total ascent)The total elevation distance ascended.
Foretrex 301/401 Owner’s Manual  19SettingsData Field DescriptionTOT DESCNT (total descent)The total elevation distance descended.TOTAL TIME A running tally of time since the last reset.TRIP ODOM (odometer)A running tally of distance traveled since last the reset.TURN The angle difference (in degrees) between the bearing to your destination and your current line of travel. ‘L’ means turn left. ‘R’ means turn right.Data Field DescriptionVERT SPEED* (vertical)Your rate of altitude gain/loss over time.VMG (velocity made good)The speed at which you are closing on a destination along a route.VSPD DEST* (vertical speed destination)The measurement of your rate of ascent/descent to a predetermined altitude.
20  Foretrex 301/401 Owner’s ManualTimerTimerThe timer page is not one of the default main pages.To display the timer:1.  From the main menu, select SETUP > TIMER.2.  Select SHOW TIMER PAGE? > YES.To set the timer:1.  From the main menu, select SETUP > TIMER.2.  Select COUNT DOWN FROM.3.  Select a time increment from the menu or select custom.To use the timer:1.  On the timer page, press enter to start the timer. NOTE: Use   to change the countdown time. 2.  Press enter to stop the timer.3.  Press   to reset the timer to the original countdown time. NOTE: When the timer is at 0:00, press enter to start the timer counting up from 0:00.Timer OptionsFrom the main menu, select SETUP > TIMER. The following options appear:WHEN EXPIRED—set the timer to stop, count up, or repeat when the timer expires.EXPIRED TONE—select the tone alert that sounds when the timer expires.INTERVAL TONE— select the tone alert that sounds when the interval time expires.•••
Foretrex 301/401 Owner’s Manual  21GPSGPSSetting GPS Mode1.  From the main menu, select SETUP > SYSTEM > GPS MODE.2.  Select the mode you want, or select OFF to use the Foretrex indoors.Satellite ReceptionThe satellite page shows your current location, GPS accuracy, satellite locations, and signal strength. Signal StrengthTo view the satellite page, select GPS from the main menu.The bars indicate GPS satellite strength. White bars indicate that the Foretrex is still collecting data. Solid bars indicate that the Foretrex is tracking that satellites.Sky ViewPress enter on the satellite page to switch to sky view.Sky view shows the location of the satellites from which you are receiving a signal.
22  Foretrex 301/401 Owner’s ManualAppendixAppendixPairing the Foretrex 401 NOTE: The Foretrex 301 does not have pairing capability.The Foretrex 401 can be used with an optional Garmin heart rate monitor to display your heart rate. It can also be used with an optional Garmin cadence bike sensor (GSC 10) to display your pedaling cadence.Pairing is connecting your Foretrex 401 with wireless sensors, such as a heart rate monitor or a cadence bike sensor. After you pair the rst time, your Foretrex 401 automatically recognizes the wireless sensor whenever they are turned on and within range of each other.To pair the Foretrex 401 with a wireless sensor:1.  Place the Foretrex 401 within 10 feet (3 meters) of the wireless sensor (heart rate monitor or GSC 10).2.  Put on the heart rate monitor or turn on the GSC 10.3.  From the main menu, select CONNECT > HEART RATE MONITOR or BIKE CADENCE SENSOR.4.  Select SEARCH FOR NEW. When the sensor is found, the “Connected” message appears. NOTE: To prevent your Foretrex 401 from pairing with wireless sensors, select CONNECT > HEART RATE MONITOR (or BIKE CADENCE SENSOR) > OFF.
Foretrex 301/401 Owner’s Manual  23AppendixWireless Data TransfersThe Foretrex 401 can send and receive waypoints, routes, and tracks wirelessly from a compatible Garmin device.To receive data:1.  From the main menu, select CONNECT > RECEIVE WIRELESSLY.2.  A “CONNECTING” message appears. When connected, a “RECEIVING DATA” message appears. A “TRANSFER COMPLETE” message appears when data is received.To send a waypoint:1.  From the main menu, select WAYPOINTS > LIST ALL.2.  Select the waypoint you want to send.3.  From the waypoint menu, select OPTIONS > SEND.To send a track:1.  From the main menu, select TRACKS > LIST ALL.2.  Select the track you want to send.3.  From the track menu, select OPTIONS > SEND.To send a route:1.  From the main menu, select ROUTES > LIST SAVED.2.  Select the route you want to send.3.  From the route menu, select OPTIONS > SEND.
24  Foretrex 301/401 Owner’s ManualAppendixConnecting Your Foretrex to a ComputerYou can use the Foretrex as a USB mass storage device by connecting it to your computer with a USB cable. NOTE: The Foretrex is not compatible with Windows® 95, 98, Me, or NT. It is also not compatible with Mac® OS 10.3 and earlier. This is a common limitation of most USB mass storage devices. 1.  Plug the small end of the USB cable into the mini-USB port on the back of the Foretrex (under the weather cap).2.  Connect the larger end of the USB cable to an available USB port on your computer.3.  Select YES to enter mass storage mode.Your Foretrex appears as a removable drive in My Computer on Windows computers and as a mounted volume on Mac computers. A copy of the waypoints, tracks, and routes on your Foretrex can be found in the Garmin/GPX/current folder.Adding Waypoints, Tracks, and Routes1. From your computer, open the Garmin/GPX folder.2. Paste your .gpx les into the GPX folder. NOTICE: If you are not sure about the purpose of a le, do not delete it. Your Foretrex memory contains important system les that should not be deleted.
Foretrex 301/401 Owner’s Manual  25AppendixJumpmasterJumpmaster is an accessory designed for experienced skydivers. A jumpmaster is the individual in charge of a group of skydivers coordinating a group or cargo drop. From the main menu, select JUMPMASTER.For more information on Jumpmaster go to www.garmin.com/manuals /eTrexVista_Jumpmaster.pdf.Storing the ForetrexDo not store the Foretrex where prolonged exposure to extreme temperatures can occur, because it can cause permanent damage. User information, such as waypoints and routes will be retained in the unit’s memory without the need for external power. It is always a good practice to back up important user data.Battery InformationWARNING: Do not use a sharp object to remove user-replaceable batteries. Contact your local waste disposal department to properly recycle the batteries.The Foretrex operates on two AAA batteries. Use alkaline or NiMH batteries. Use precharged NiMH batteries for best results.Select the battery type:1.  From the main menu, select SETUP.2.  Select SYSTEM > BATTERY.3.  Select ALKALINE or NIMH.
26  Foretrex 301/401 Owner’s ManualAppendixOptimizing Battery LifeUse premium batteries for optimal performance and maximum battery life.Consider the following suggestions to maximize battery life:Excessive use of the backlight will signicantly decrease battery life.Select a shorter backlight timeout (page 3).Turn tones off if not needed. From the main menu, select SETUP > SYSTEM > BEEPER > OFF.Turn off the compass when it is not being used (Foretrex 401 only). Select SETUP > HEADING > COMPASS > OFF.••••Resetting the ForetrexIf your Foretrex is locked up, press and hold page and   simultaneously until the screen goes blank (about 7 seconds). This does not erase any of your data or settings.Clearing User Data NOTICE: This deletes all history and user-entered information.To clear all user data, press and hold enter on startup until the message appears.
Foretrex 301/401 Owner’s Manual  27AppendixReplacing the Wristband1.  Use a #1 Phillips screwdriver to remove the screws (2) on the back of the unit.Screw Screw holeScrew Screw hole2.  Remove the old wristband.3.  Align the loops of the new wristband with the screw holes on the back of the unit. Make sure that the Garmin logo is facing up.4.  Replace the screws.To install the extension strap (optional):1.  Thread the end of the Foretrex strap through the plastic ring on the extension strap.2.  Thread the other end of the extension strap through the plastic ring on the Foretrex strap. 3.  Adjust as necessary.Cleaning the Unit and WristbandThe Foretrex is constructed of high-quality materials and does not require user maintenance other than cleaning. Clean the unit using a cloth dampened with a mild detergent solution and then wipe dry. Avoid chemical cleaners and solvents that may damage plastic components.  The wristband should be hand washed with mild detergent in warm or hot water.  Blot dry, then air dry.  Do not machine wash.
28  Foretrex 301/401 Owner’s ManualAppendixSpecicationsPhysicalSize: W × H × D:  2.93 × 0.89 × 1.65 in.  (74.5 × 22.5 × 42 mm)Weight (with wristband):  2.26 oz. (64 g) without batteriesDisplay: W × H: 1.44 × 0.92 in. (23.368 × 36.576 mm) 100 × 64 pixelsCase: Rugged, waterproof to IPX7Temperature Range: From -4°F to 140°F (from -20 to 60°C)**The temperature rating of the Foretrex may exceed the usable range of some batteries. Some batteries can rupture at high temperatures.PowerSource: Two AAA batteries  (alkaline or NiMH)AccuracyGPS: < 33 ft. (10 m) 95% typical**Subject to accuracy degradation to  100 m2 2DRMS under the US DoD imposed Selective Availability (SA) Program when activated.Velocity: 0.328 ft./sec. (0.1 m/sec) steady stateInterface: USB mass storage deviceData Storage Life: Indenite; no memory battery requiredPerformanceReceiver: more than 12 channels, high-sensitivityAcquisition Times: < 1 second (warm start) < 33 seconds (cold start) < 36 seconds (Autolocate)Update Rate: 1/second, continuous
Foretrex 301/401 Owner’s Manual  29AppendixSoftware License AgreementBY USING THE FORETREX, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY.Garmin grants you a limited license to use the software embedded in this device (the “Software”) in binary executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in and to the Software remain in Garmin.You acknowledge that the Software is the property of Garmin and is protected under the United States of America copyright laws and international copyright treaties. You further acknowledge that the structure, organization, and code of the Software are valuable trade secrets of Garmin and that the Software in source code form remains a valuable trade secret of Garmin. You agree not to decompile, disassemble, modify, reverse assemble, reverse engineer, or reduce to human readable form the Software or any part thereof or create any derivative works based on the Software. You agree not to export or re-export the Software to any country in violation of the export control laws of the United States of America.Declaration of Conformity (DoC)Hereby, Garmin, declares that this Foretrex is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.To view the full Declaration of Conformity, see the Garmin Web site for your Garmin product:  www.garmin.com.
30  Foretrex 301/401 Owner’s ManualAppendixFCC ComplianceThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:Reorient or relocate the receiving antennaIncrease the separation between the equipment and receiverConnect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help.This Category II radiocommunication device complies with Industry Canada Standard RSS-310. ••••
IndexForetrex 301/401 Owner’s Manual  31IndexAaccessories  ii, 22altimeter  7, 14Bbacklight  3barometric altimeter  7, 14battery  2life  26type  25buttons  2Ccadence sensor  22compasscalibrating  6options  12page  6connectingcomputer  24unit to unit  24contacting Garmin  icustom data elds  15Ddata, transferring  23data elds  15changing  12, 13distancemeasuring  5Eelevationpage  6plot  13zoom  13Flesadding  24transferring  23GGarmin Product Support  iGPSacquiring signals  3mode  21modes  15reception  21sky view  21GSC 10  16, 22Hheart rate monitor  22Llanguage  14Mmain menu  7options  13main pages  4manual conventions  imapdetail  12options  12page  5Ppairing  22product registration  i
Index32  Foretrex 301/401 Owner’s ManualRresetting the unit  26routescreating  11navigating  11Ssatellite signals  3, 21sensors  22serial number  1specications  28storing  25Ttime  14timeroptions  20setting  12, 13tracksnavigating  10recording  10trip computeroptions  13page  7UUSB, connecting  24Wwaypointsediting  8marking  8navigating  8wireless transfer  23wristbandcleaning  27extender strap  27replacing  27
For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com.© 2009 Garmin Ltd. or its subsidiariesGarmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USAGarmin (Europe) Ltd. Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UKGarmin Corporation No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwanwww.garmin.comMay 2009  Part Number 190-01068-00 Rev. A  Printed in Taiwan

Navigation menu