GPD Technology GPDPOCKET2 GPD Pocket 2 User Manual

Shenzhen GPD Technology Co., Ltd. GPD Pocket 2 Users Manual

Users Manual

Chapter one Start to learn your computer FCC ID: 2AJQ5GPDPOCKET2Model Name : Pocket 2
Chapter Two Basic Operation st-time UsePlease read the user`s manualPlease read the user`s manual before operating your computer Connect the power supply。The battery module is not full charged when finish the production. If you want to charge the battery and use computer, please connect the computer to the outlet.Turn on the computerPress the power button to turn on the computer Enter the operation systemThe operation system has been set after production
Use the keyboardThe keyboard is a integrated highly QWERTY keyboard. The default output for first row is number keys. If you want to switch to F1-F12 button/ special character just need to press the Fn/Ctrl at the same time.  PgUp、Home、PgDn、End 、、、 重叠，默认输出为PgUp/Home/PgDn/End and     buttons overlap, the default output is   , press the Fn button to switch to PgUp/Home/PgDn/End modes.
Use touch screenTouch screen operation is supported. If water drop or drink drops on the screen, the touch screen operation will be disabled. The touch screen controller can recognize dust automatically, but too much dust will de-crease the sensibility of the touch screen. Before clean the touch screen, please plug off the power line. Please make sure the to-uch screen is on the power shutdown condition, clear the screen with clean and soft cl-othe lightly.( It is better to use the glasses cloth. Please don`t spray to the screen direc-tly.
To connect external devicesYour computer has many built in function and outer joins, such as memory HDMI / U-SB flash disk, etc. Connection universal serial bus (USB) deviceYour computer has two USB port.
：Note: When use large power USB device(such as USB driver),please use the external device power adapter. Otherwise, the device will probably can not be recognized/used, or the s-ystem will power off. Connect the Bluetooth deviceYour computer has Bluetooth function built in, you can connect with other Bluetooth d-evices such as notebook PDA and cellphone to transfer data. In open space, the data c-an be transferred within 10 meters. Note: The actual connection distance will be different by many interference factors. If you wa-nt a best transfer speed, please close the device to the computer.
The chapter three Use Internet As a global network, internet has connected the worldwide computers and provide servi-ce such as emails message search, e-commerce, website browse and entertainment. You can use methods to connect computer to Internet Wire connectionNote: before connection, please make sure you have a adapter to switch USB to R145. Connection stepsInsert the USB cable of the adapter to the USB HostInsert the crystal cable to the R145 jack When the system tray shows””, that means connect successfully. Wireless connectionNote: Wi-Fi connection displays Connection stepsClick the Wi-Fi logo on bottom right corner of the system trayClick certain Wi-Fi account
Click to connectInput the pass wordsClick the connectWhen the system tray diplay , that means connect successfully.
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may causeundesired operation.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.-Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu