GODOX PHOTO EQUIPMENT TT600 Thinklite Camera Flash User Manual x

GODOX PHOTO EQUIPMENT CO.LTD Thinklite Camera Flash x

Users Manual

GODOX PHOTO EQUIPMENT CO.LTD Camera Flash TT600 Foreword Before using this product Please read this user manual carefully in order to ensure your safety and the proper operation of this product. Keep for future reference. Thank you for purchasing a GODOX product. TT600 camera flash adopts Godox wireless X system and 2.4G ratio transmission, which is compatible with AD360II-C、AD360II-N、TT685C、TT685N、X1T-C、X1T-N, etc. Fit all DSLR camera brands e.g. Canon, Nikon, Sony, etc. This TT600 camera flash features: z GN60 (m ISO 100, @200mm). Adjust from 1/1 to 1/128 in 1/3rd stops z Built-in 2.4G wireless transmission to support transmitting and receiving z High speed sync, wireless remote control, multi flash and manual focus assist z Stable consistency and color temperature with good even lighting z User-friendly LCD display & control panel
For Your Safety z Always keep this product dry. Do not use in rain or in damp conditions. z This product contains high-voltage electronic parts. Touching the high-voltage circuit inside it may result in electric shock. Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. z Stop using this product if it breaks open due to extrusion, falling or strong hit. Otherwise, electric shock may occur if you touch the electronic parts inside it. z Do not fire the flash directly into the eyes (especially those of babies) within short distances. Otherwise visual impairment may occur. When taking pictures for babies, keep the flash unit at least 1 meter (3.3 feet) away from them. Using bounce flash to reduce light intensity is also recommended. z Do not use the flash unit in the presence of flammable gases, chemicals and other similar materials. In certain circumstances, these materials may be sensitive to the strong light emitting from this flash unit and fire or electromagnetic interference may result. z Do not leave or store the flash unit in places where the ambient temperature reads over 50°C (e.g. in automobile). Otherwise the electronic parts may be damaged. Contents Foreword For Your Safety Name of Parts Body
Control Panel LCD Panel What’s in the Box of TT600? Separately Sold Accessories Attaching to a Camera Using the Flash Power Management Flash Output ZOOM: Setting the Flash Coverage M Mode Multi Mode: Stroboscopic Flash S1 Mode S2 Mode Hi-Speed Sync Triggering Custom Function----Focus Assist Beam Buzz Function Wireless Flash Shooting: Ratio (2.4G) Transmission Wireless Control Function Sync Triggering Custom Function----Sleep Function Protection Function Advanced Application Technical Data Maintenance
Name of Parts z Body 01. Catchlight Panel 02. Built-In Wide Panel (Retracted) 03. Flash Head 04. Optic Control Sensor 05. Focus Assist Beam 06. Wireless Control Port 07. Sync Cord Jack 08. Hotshoe 09. Lock Ring 10. Battery Compartment z Control Panel 11. < MODE/ > Mode Selection Button/Wireless Mode Selection (Long Keypress) 12. < > Zoom / Function Custom Button (Long Keypress) 13. <GR/CH> Group/ Channel Setting (Long Keypress) 14. Select Dial 15. < > Set Button 16. ON/OFF Power Switch 17. < > Test Button / Flash Ready Indicator 18. < > Focus Assist Beam / High Speed Sync Button (Long Keypress)
z LCD Panel 19. <M> Manual Flash Mode 20. <S1> S1 Slave Flash Triggering 21. <S2> S2 Slave Flash Triggering 22. <Multi> Multi/Stroboscopic Flash Mode 23. < > High Speed Sync Triggering 24. < > Battery Level Indication 25. < > Sound Beep Indication 26. < > Sleep Status 27. < > Overtemperature Indication 28. < > Wireless Signal Transmission 29. < > Focus Assist Beam Indicator 30. Channel 31. Group z What’s in the Box of TT600? 1-flash unit 1-Mini Stand 1-Protection Case 1-Instruction manual z Separately Sold Accessories The product can be used in combination with the following accessories sold separately, so as to
achieve best photography effects: Cells II high speed trigger, FT-16S power & trigger control, Car charger, Mini softbox, White & Silver Reflector, Honeycomb, Color gels, Snoot, etc. Attaching to a Camera 1. Attach the Camera Flash. Slip the camera flash’s mounting foot into the camera’s hotshoe all the way. 2. Secure the Camera Flash. Rotate the locking screw on the mounting foot until it locks up. 3. Detach the Camera Flash. Rotate the locking screw on the mounting foot until it is loosened. Using the Flash 1. Power Management Use ON/OFF Power Switch (16) to power the flash unit on or off. Turn off if it will not be used for an extended period of time. This flash unit has Sleep Function and will enter into sleep status when there is no operation for a long time. For Sleep Function setting, see the following instruction.
2. Flash Output z Flash output can be varied from 1/128th power to 1/1 full power in 1/3 stop increments. To obtain a correct flash exposure, use a hand-held flash meter to determine the required flash output. z Adjust the power output by rotating Select Dial (14). The following table makes it easier to see how the stop changes in terms of f/stop when you increase or decrease the flash output: Figures displayed when reducing flash output level→ 1/1 1/1-0.3 1/1-0.7 1/2 1/2-0.3 1/2-0.7 1/4 … OF 1/2+0.7 1/2+0.3 1/4+0.7 1/4+0.3 … ←Figures displayed when increasing flash output level 3. ZOOM: Setting the Flash Coverage The flash coverage can be set to match the lens focal length from 24 mm to 200 mm. Press < > button (12) and rotate Select Dial (14) to change the flash coverage. 4. M Mode: Manual Mode Press MODE Selection Button (11) to enter M mode. In this mode, you can set the flash unit onto your camera hot shoe or your trigger hot shoe for firing. Before shooting, adjust the flash power output. When the camera’s shutter is pressed, the flash will fire synchronously. Slave triggering mode is not available in M mode. When “OF” is shown on the LCD display, it means no flash output and flash firing is turned off. When setting the flash coverage, make sure it covers the lens focal length so that the picture will not have a dark periphery.
5. Multi Mode: Stroboscopic Flash Press Mode Selection Button (11) to enter Multi mode (Stroboscopic flash). With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture multiple images of a moving subject in a single photograph. You can set the firing frequency (number of flashes per sec. expressed as Hz), the number of flashes, and the flash output. For setting procedures, see the following: z Press the Mode Selection Button (11) so that “Multi” is displayed. z Press Set Button (15) to select the item to be set. The item blinks. z Rotate Select Dial (14) to set a desired number. Calculating the Shutter Speed During stroboscopic flash, the shutter remains open until the firing stops. Use the provided formula to calculate the shutter speed required to capture the full sequence of flashes: Number of flashes / Firing frequency = Shutter speed For example, if the number of flashes is 10 and the firing frequency is 5 Hz, the shutter speed should be at least 2 sec. Maximum Stroboscopic Flashes： Note: z Stroboscopic flash is most effective with a highly reflective subject against a dark background. z Using a tripod and a remote switch is recommended. z A flash output of 1/1 or 1/2 cannot be set for stroboscopic flash. z Stroboscopic flash can be used with “buLb”.
1 2 3 4 5 6-7 8-9 1/4 7 6 5 4 4 3 3 1/8 14 14 12 10 8 6 5 1/16 30 30 30 20 20 20 10 1/32 60 60 60 50 50 40 30 1/64 90 90 90 80 80 70 60 1/128 100 100 100 100 100 90 80 10 11 12-14 15-19 20-50 60-199 1/4 2 2 2 2 2 2 1/8 4 4 4 4 4 4 1/16 8 8 8 8 8 8 1/32 20 20 20 18 16 12 1/64 50 40 40 35 30 20 1/128 70 70 60 50 40 40 6. S1 Mode: S1 Slave Triggering Mode Long Press <zoom/Fn> button for 2 seconds to enter the custom menu and press Set Button to choose Sn. Then, turn the Select Dial to choose OFF/S1/S2. In S1 mode, the flash unit can function as a slave flash for creating multiple lighting effects. It is respectively applicable to manual flash environment. In S1 mode, the flash unit will fire synchronously when the master flash fires, the same effect as that by the use of radio triggers. 7. S2 Mode: S2 Slave Triggering Mode Long Press <ZOOM/Fn> button for 2 seconds to enter the custom menu and press Set Button to choose Sn. Then, turn the Select Dial to choose OFF/S1/S2. In S2 mode, the flash unit can function as a slave flash for creating multiple lighting effects. It is applicable when using a TTL master flash. In S2 mode, the flash unit will ignore a single “preflash” from the master flash and will only fire HzFlashOutputHzFlash Output To avoid overheating and deteriorating the flash head during stroboscopic flash, do not use stroboscopic flash more than 10 times in succession.
in response to the second, actual flash from the master. 8. Hi-Speed Sync Triggering z To enter mode, long press < > button and hold for 2 seconds. z To exit mode, press Mode Selection Button or long press < > button and hold for 2 seconds again. z In hi-speed sync triggering mode, you can use a hi-speed sync trigger to have your flash unit synchronized with all shutter speeds of cameras (max. 1/8000 second, up to your camera). This is convenient when you want to use aperture priority for fill-flash portraits. 9. Custom Function-----Focus Assist Lamp z Under poorly-lit or low-contrast conditions, you can press < > button (18) to turn on the focus assist beam in order to make it easier to autofocus. Note: *Hi-speed sync triggering mode is effective only when the flash unit is used together with the following flash triggers. 1. Hi-speed sync trigger, e.g., Godox Cells II transceiver. 2. TTL wireless flash trigger X1C 3. TTL wireless flash trigger X1N *Hi-speed sync triggering mode is not available when TT600 is mounted onto the camera To avoid overheating or deteriorating the flash head during high speed sync flash, the over-temperature protection function will be activated automatically after 10 continuous high-speed flashes and the recycle time becomes 10 seconds longer.
z The beam will automatically put out certain seconds after the last pop is fired. The time between the last fire and the auto shutdown of focus assist beam is called No-Flash Time. The time is user adjustable and set to 10 seconds by default. z Press < > button and hold for 2 seconds to enter Custom Function. Then press “SET” button to enter “FC” mode. The LCD panel displays “FC” (Auto shutdown of focus assist lamp) and “No-Flash Time”. Rotate Select Dial (14) to set a desired time for the flash. Press < > button to return. No-Flash Time Meaning 10 seconds 10 seconds after the last fire, focus assist lamp will automatically get out. 20 seconds 20 seconds after the last fire, focus assist lamp will automatically get out. 30 seconds 30 seconds after the last fire, focus assist lamp will automatically get out. 10. Buzz Function To turn the buzz function on or off, press button and hold for 2 seconds to enter Custom Function. Then press “SET” button to enter “bp” mode. The LCD displays“ON”means buzz is turned on while “OF” means buzz is turned off. When the buzzer is turned on, is shown on the LCD display. 11. Wireless Flash Shooting: Ratio (2.4G) Transmission z TT600 has 2.4G ratio transmission (Master/Slave) z Wireless mode setting: Long press < MODE/ > button and hold for 2 seconds until icon is blinking. Turn the Select Dial to set from OFF/Master(M)/Slave(S) mode. z Channel setting: Long press < GR/CH > button and hold for 2 seconds until the figure besides the CH is blinking. Turn the Select Dial to choose the channel from 1~32.
z Group setting: Short press < GR/CH > button to select group. In Master mode, groups can be selected from M/A/B/C/D/E; while in Slave mode, groups can be selected from A/B/C/D/E. z As TT600 adopts Godox wireless X system, it is compatible with AD360II-C、AD360II-N、TT685C、TT685N、X1T-C、X1T-N wireless control, etc. z See the picture below: 12. Wireless Control Function z The flash unit is built in with a Wireless Control Port (6) so that you can wirelessly adjust the power level of the flash and control the on-or-off of your flash, focus assist beam and buzzer, as well as trigger the flash. z To control the flash wirelessly, you need a Godox FT series remote control set (on-camera and on-flash). Insert its receive end into the Wireless Control Port (6) on the flash and insert the transmit end into the camera hot shoe. Settings made on the hotshoe-mounted transmit and receive ends will be wirelessly communicated to the flash. Then you can press the camera shutter-release button to trigger the flash. You can also hold the transmit end at hand to control your off-camera flash. z For full instructions on the use of FT series remote control, see its user manual. 13. Sync Triggering The Sync Cord Jack (7) is a Φ3.5mm plug. Insert a trigger plug here and the flash will be fired synchronously with the camera shutter. m
14. Custom Function----Sleep Function z This product is equipped with Sleep Function to avoid battery drain when the flash unit is idle. z Press < > button and hold for 2 seconds to enter the sleep Function Mode. The LCD panel displays “SL” (Sleep) and “Sleeping Time”. Idle time before entering Sleep Mode is 10 minutes by default. Rotate Select Dial (14) to set a desired time for the flash or to turn off Sleep Function. Press < > button to return. Idle Time Meaning OF Sleep Function is turned off. The flash unit will not automatically enter sleep mode. 3 Idle time before entering Sleep Mode is set to 3 minutes. 10 Idle time before entering Sleep Mode is set to 10 minutes. 30 Idle time before entering Sleep Mode is set to 30 minutes. 60 Idle time before entering Sleep Mode is set to 60 minutes. z When the flash enters sleep mode, the LCD panel displays a “Zz”icon. z To wake up the flash unit, press any button on the flash unit, or press the camera release button, or press the trigger TEST button. 15. C.Fn Setting Custom Functions Custom Function Signs Function Settings & Description Operation Sleeping Settable Time: 1. Press <Zoom/Fn> button to Note: The idle time before entering Sleep Mode is recommended to set short. This can ensure a longer battery life.
SL Time Setting <3> 3 minutes <10> 10 minutes <30> 30 minutes <60> 60 minutes <OF>（OFF） enter Custom Functions. 2. Turn the Select Dial to adjust sleeping time. 3. Press <Zoom/Fn> button to return. *Press any button can wake up the flash. * The idle time before entering Sleep Mode is recommended to set short. This can ensure a longer battery life. FC Auto Power OFF Time Setting of Auto Focus Assist <10>10 seconds <20>20 seconds <30>30 seconds 1. Press <Zoom/Fn> button to enter Custom Functions. 2. Press SET button to enter FC states. 3. Turn the Select Dial to adjust. 4. Press <Zoom/Fn> button to return. bp Buzz Setting <ON> On <OF> Off 1. Press <Zoom/Fn> button to enter Custom Functions. 2. Press SET button to enter bp states. 3. Turn the Select Dial to adjust. 4. Press <Zoom/Fn> button to
return. bL Backlight Setting Backlight can be set as follows：<ON>：Always lighting <12>：Off in 12 sec. <OF>：Off 1. Press <Zoom/Fn> button to enter Custom Functions. 2. Press SET button to enter bL states. 3. Turn the Select Dial to adjust. 4. Press <Zoom/Fn> button to return. OS Optic Slave Mode <OF> Off <S1> S1 mode <S2> S2 mode 1. Press <Zoom/Fn> button to enter Custom Functions. 2. Press SET button to enter OS states. 3. Turn the Select Dial to adjust. 4. Press <Zoom/Fn> button to return. Protection Function 1. Over-Temperature Protection z To avoid overheating and deteriorating the flash head, do not fire more than 30 continuous flashes in fast succession at 1/1 full power. After 30 continuous flashes, allow a rest time of at least 10 minutes. z If you fire more than 30 continuous flashes and then fire more flashes in short intervals, the inner over-temperature protection function may be activated and make the recycling time
about 10 to 15 seconds. If this occurs, allow a rest time of about 10 minutes, and the flash unit will then return to normal. z When the over-temperature protection is started, is shown on the LCD display. Number of flashes that will activate over-temperature protection: Power Output Level Number of Flashes 1/1 30 1/2 +0.7 40 1/2 +0.3 50 1/2 60 1/4（+0.3,+0.7） 100 1/8（+0.3,+0.7） 200 1/16（+0.3,+0.7） 300 1/32（+0.3,+0.7） 500 1/64（+0.3,+0.7） 1/128（+0.3,+0.7） 1000 Number of flashes that will activate over-temperature protection in high-speed sync mode: Power Times 1/1 15 1/2（+0.3,+0.7）; 20 1/4（+0.3,+0.7） 1/8（+0.3,+0.7）; 30 1/16（+0.3,+0.7） 1/32（+0.3,+0.7）; 40 1/64（+0.3,+0.7）; 50
1/128（+0.3,+0.7）; 2. Other Protections The system provides real-time protection to secure the device and your safety. The following lists prompts for your reference: Prompts on LCD Panel Meaning E0 A failure occurs on the temperature sensor. Please send this kit to a maintenance center. E1 A failure occurs on the recycling system so that the flash cannot fire. Please restart the flash unit. If the problem still exists, please send this product to a maintenance center. E2 The system gets excessive heat. Please allow a rest time of 10 minutes. E3 The voltage on two outlets of the flash tube is too high. Please send this product to a maintenance center. Advanced Application 1. Bounce Flash By pointing the flash head toward a wall or ceiling, the flash will bounce off the surface before illuminating the subject. This can soften shadows behind the subject for a more natural-looking shot. 2. Creating a Catchlight With the catchlight panel, you can create a catchlight in the subject’s eyes to add life to the facial expression. 3. Using the Wide Panel Pull out the built-in wide panel to enlarge the flash lighting range, so as to get more softened and
natural lighting effect. Technical Data Product Model TT600 Guide No. (1/1 power @ 200mm) GN60 (m ISO 100) Vertical Rotation Angle -7° to 90° Horizontal Rotation Angle 0 to 360° Power Supply Ni-MH batteries (recommended) or 4*LR6 alkaline batteries Full Power Flashes Approx. 230 (2500mA Ni-MH batteries) Recycle Time Approx. 0.1-2.6 seconds (eneloop Ni-MH batteries of Panasonic). Red LED indicator will light up when the flash is ready. Flash Duration 1/300s－1/20000s Color Temperature 5600±200K Wireless Flash Function Master, Slave, Off Controllable slave groups 5 (A, B, C, D, E) Transmission Range (approx.) 100m Channel 1~32 Dimension 64mm *76mm*190 mm Weight without Battery 400g Weight with Battery 500g Maintenance -Shut down the device immediately should abnormal operation be detected. -Avoid sudden impacts and the lamp should be dedusted regularly.
-It is normal for the flash tube to be warm when in use. Avoid continuous flashes if unnecessary. -Maintenance of the flash must be performed by our authorized maintenance department which can provide original accessories. -This product, except consumables e.g. flash tube, is supported with a one-year warranty. -Unauthorized service will void the warranty. -If the product had failures or was wetted, do not use it until it is repaired by professionals. -Changes made to the specifications or designs may not be reflected in this manual. FCC Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.

Navigation menu