G4S Technology S830 Proximity Card Reader User Manual Manual

G4S Technology Limited Proximity Card Reader Manual

Manual

Installation and User Instructions for S830 ReadersModel number:S830-HICLRThe S830 is a small-footprint 125kHz proximity cardreader that is capable of reading HID format cards.The S830 uses p.®20mA current loop seudo-randomcommunications1Mount the BackplateTo mount the backplate:1) Detach the main body of the reader from thebackplate by inserting a fingernail into the groove inthe bottom edge of the reader and swinging thereader upwards.2) Mount the backplate adjacent to the opening edgeof the door and at a convenient height. Feed thecable to the reader through the backplate.
9600-xxxx. Installation and User Instructions for S830Readers, Issue 1.0x2 10th June 2003. AMAGTechnology, 2003.FCC Notice: This device complies with Part 15 of the FCCRules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received,including interference that may cause undesired operation.Any unauthorized modification to this device may void theauthority of the user to operate it.All trademarks acknowledged. HID is a registeredtrademark of HID Corporation.©3Using the Reader2Reader Connections20mA Current LoopReader Connections0VConnect screen atcontroller end only(attach to case)Tx-Tx+Rx-Rx+ Tx+Tx-Rx+Rx-12V 12V0VController connections(20mA reader port)RedBlackWhiteBlueGreenOrangeNote: the brownwire is not usedReaderPresent the proximity card face-on to the reader until you hear a "bleep". The maximum read rangeis typically 2.5" (65mm). If the green indicator is lit, the card has been accepted and the door isunlocked. If the red indicator is lit, either the card has not been accepted, or you do not haveaccess through the door.cards can be presented in rapid succession - there is no need to wait for the green or redLED to extinguish before presenting another card.Note:SpecificationsInput voltage: 9-14V.Input current: 75mA @ nominal 12Vdc supply.Operating temperature: -4 to 150 F (-20 to 70 C).Operating humidity: 15 to 90%, non-condensing.Maximum read range: 2.5" (65mm).Approvals: EN50133, R&TTE, IP656.°°

Navigation menu