Fujitsu FOMA-F906I Part 15 Low Power Communication Device Transmitter User Manual F906i
Fujitsu Limited Part 15 Low Power Communication Device Transmitter F906i
UserManual.wiki
>
Fujitsu
>
FOMA-F906I User Manual
>
manual 7
Contents
1.
manual 1
2.
manual 2
3.
manual 3
4.
manual 4
5.
manual 5
6.
manual 6
7.
manual 7
8.
manual 8
9.
manual 9
10.
manual 10
manual 7
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![250 Osaifu-Keitai/ToruCaF906i_E1kou◆Locking only a specified IC card function <Lock preference>You can set so that, when activating IC card lock, only the IC card function for Osaifu-Keitai compatible i-αppli previously specified is locked (Individual IC card lock).1m [Osaifu-Keitai] 4222eSelect the Osaifu-Keitai compatible i-αpplieCLocking all IC card functions : 1✔INFORMATION･For selected Osaifu-Keitai compatible i-αppli, appears on IC card content.→P225･The selecting targets are Osaifu-Keitai compatible i-αppli that the service is already registered in the IC card and the service is available.◆Automatically activating IC card lock <Timed lock>You can set to activate IC card lock automatically after the specified time has elapsed.1m [Osaifu-Keitai] 43eSet the required itemseC✔INFORMATION･If the power is turned OFF manually or due to exhaustion of the battery while this function is "ON", IC card lock is activated before the specified time.･When locking time comes while using Osaifu-Keitai compatible i-αppli, IC card lock is activated upon termination of Osaifu-Keitai compatible i-αppli.◆Automatically deactivating IC card lock at specified time <Programed activation>You can set to make the IC card available only in the specified period of time in IC card lock.･Up to 7 items can be registered.･This function operates only while the power is ON.1m [Osaifu-Keitai] 44eAuthenticatee1-7Setting/Canceling : Place the cursor on the title and m･ appears at the left of the title for the Programed activation set to ON.2Set the required itemseCTime : Enter the start time and end time (it can be set to the following day over 24 o'clock) to deactivate IC card lock.Repeat : When "Day of week" is selected, select "Day/Week", select a day of the week and press C.Title : Up to 9 two-byte (18 one-byte) characters can be entered.✔INFORMATION･When the end time for deactivating IC card lock comes while using Osaifu-Keitai compatible i-αppli, IC card lock is activated upon termination of Osaifu-Keitai compatible i-αppli.･IC card lock can be started in the period for which IC card lock is deactivated, but cannot be automatically activated by Timed lock.◆Locking IC card functions when power is turned OFF <IC lock(power-off)>You can select if you continue the IC card lock state before turning the power OFF or lock all IC card functions.1m [Osaifu-Keitai] 45eAuthenticatee1 or 2F906i.book Page 250 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-1.png)
![252 GPS FunctionF906i_E1kouUsing GPS Function･This function is unavailable as a navigation device for aircraft, vehicles or persons or as high-precision location surveying GPS. DoCoMo is not liable to any purely economic damages including troubles, if any, caused by missing opportunities of viewing positioning results or making communications due to failures or malfunctions of FOMA terminal or external events such as power interruption (including battery exhaustion) in using FOMA terminal for purposes including but not limited to the above.･Because GPS is managed by U.S. Department of Defense, GPS wave conditions may be controlled (accuracy degraded or wave stopped) for security reasons of the U.S. And, wave conditions differ by satellite locations; therefore, positioning operations in the same location under the same environmental conditions may not yield the same result.･GPS uses waves transmitted from satellites and it may be disabled or become hard to receive waves in the conditions below, causing to have an error of 300 m or more in location information.- Under or inside forest, on street of large buildings or in an area packed with many houses- Inside or beneath a building- Underground, in a tunnel or underwater- Near a high-voltage cable- Inside an automobile, train, etc.- Bad weather such as heavy rain or snow- Covered with hand etc., or placed in a bag etc.- FOMA terminal closed- FOMA terminal surrounded by obstacles or persons･When using Location request and Notify location functions, check instructions and precautions given in website of GPS service providers and DoCoMo. And, you may be charged for using these functions.･The GPS function except Position location is not available in out of service area or overseas.Position locationChecking your current location･No packet communication fee applies for Position location. Note that a packet communication fee is required separately with map displayed using location information.･Positioning is unavailable while positioning with Location request or Notify location.･Even out of service area or overseas, positioning may be enabled in a location with a wide view, but it may function abnormally, e.g., taking long time or positioning disabled under certain environmental conditions.1m [LifeKit] 71Positioning starts and the light turns on.･Accuracy icon definitions.★★★ : Nearly accurate location information (with an error of less than 50 m)★★☆ : Comparatively accurate location information (with an error of less than 300 m)★☆☆ : Approximate location information (with an error of 300 m or more)Accuracy is merely approximate indication. Actual accuracy may vary by the environmental wave and other conditions.･When positioning, press c or f to stop it.･To use the location information currently acquired, press C.2Select a function from Use location info menu after positioningOperating Use location info menu→P253 "■Use location menu"Blinking when positioningApproximate time elapsed in positioningAccuracyF906i.book Page 252 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-3.png)
![254 GPS FunctionF906i_E1kouUsing Location information of phonebook : 3eSelect a phonebook entry from FOMA terminal phonebook list with Location information enterede"Yes"Using Location information of User information : 4eAuthenticatee"Yes"Using Location information entered to an image : 5eSelect a foldereSelect an imagee"Yes"◆Setting actions to be taken after Position location <Post-Position task>Set actions after Position location when pressing 8 for 1 second or more on stand-by display (the setting of Shortcut menu in default state) or starting Position location from Shortcut icons.･It is also applicable when Custom menu settings are changed and Position location is assigned to another keypad (the first level).1m [LifeKit] 741e1-6Read map : Connect to a map site and display a map based on the positioned location information.Run i-αppli : Display a list of GPS compatible i-αppli.Paste to mail : A mail creation screen appears, with "位置メール (Location mail)" entered in the subject field, and with a Location information in the form of URL entered in the message text.Add to phonebook : Display a screen for selecting "Add to phonebook" or "Update phonebook". You can add new phonebook entry with location information set or update location information to an existing phonebook entry.Add to image : Display image folder list. Positioned location information can be added to an image.Confirm each time : Display accuracy and location information menu.→P253Using GPS compatible i-αppli･Using GPS compatible i-αppli sends location information to the Information Provider of the i-αppli to be used.･When using the GPS function with GPS compatible i-αppli, "Location usage setting" of i-αppli to be used must be set to "Yes".･"地図アプリ (Map application)" and "モバイルGoogleマップ (Mobile Google map)" are stored by default as GPS compatible i-αppli.1m [LifeKit] 72eSelect GPS compatible i-αppli to start･To exit GPS compatible i-αppli, use the procedure specified for each i-αppli.◆Using 地図アプリ (Map application)By the preinstalled "地図アプリ", using GPS function and map, you can look up your current location or the map of specified place, search information around the place, perform navigation to the destination by vehicle, on foot or by car.･A packet communication fee is required separately. It is recommended to use Pake-Houdai or Pake-Houdai full for this software.･In case of deleting it, you can download it from "ｉエリア−周辺情報− (i-area - Peripheral information -)" site.･It is unavailable with 2in1 ON in B mode.･DoCoMo gives no assurances of accuracy, immediacy, etc. of the map or routing information. Please be forewarned.･Make sure that other than the driver operate this software while driving.･The display shown here is an example. Screens are given only for information purposes and may differ from actual displays.❖Basic services and additional servicesThere are 2 services below for this software.Basic service : The services DoCoMo offers without charge.Additional service : The services ZENRIN DataCom offers with charge.･You can use all functions except traffic information free of charge till 90th days from the first activation. To use the additional services on or after the 91st day, you are required to subscribe (charged) to "ゼンリン 地図＋ナビ" provided by ZENRIN DataCom.･If you subscribe to this software after you start using it, you do not need to download the software again. You can use this software without modification.F906i.book Page 254 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-5.png)
![260 GPS FunctionF906i_E1kou･When "毎回確認 (Check each time)" is set for usage settings by services, a screen shown below appears. Select "Yes" to start Location request.✔INFORMATION･Sending Location information requires no charge.･Location request is unavailable while positioning with Position location or Notify location, while FOMA terminal is out of service area or during Self mode, i-mode communication with i-αppli or infrared communication/iC transmission. If the battery is exhausted or Omakase Lock is activated while positioning, it is stopped.･Information is not delivered by Location request to the requestor under some wave conditions.･If "毎回確認 (Check each time)" is set for usage settings by services when Location request is issued during Public mode (Drive mode), location information is not sent. If "許可 (Permit)" is set, a screen appears and location information is sent, but the GPS alert sound is not emitted, and the light or vibrator does not operate.･With 2in1 ON, Location request for Number A is available regardless of mode of 2in1.･When you are required to provide the location information by a party using imadocokantan search, it operates as below.- Every time you are required, a confirmation screen for location information appears. If you select "Yes", a rough positioning result is immediately notified to the other party. After the positioning, high-precision positioning results are notified to the other party.- Even if the location request is interrupted after selecting "Yes" on the confirmation screen of location request, a rough positioning result is notified to the other party. In this case, although it is recorded in the Loc. history, the location information is not displayed.◆Setting whether to permit/deny Location request <Request permit/deny>You can set if you provide location information when there is a request from other parties.･"Always permit" or "Always deny" in this setting can also be set in initial settings.→P481m [LifeKit] 761eAuthenticatee1-3･With "Always permit" set, location information may be sent and notified to the searcher without operations.･ (blue) appears on the stand-by display when "Always permit" or "Permission period" is set. When permission period is outside a valid period, (gray) appears. With FOMA terminal folded, or appears on the sub-display.Setting permission period : 3eSet the required itemseCStart : Set time for "Always permit".End : Set time for "Always deny".･You can set the next day exceeding 24:00.Repeat : Set repetition of operation of the set time.･When "Day of week" is selected, select "Day/Week", select the day of the week to perform Location request and press C.Date : Set a period of time to perform Location request. When "Specify start date" or "Specify start/end" is set, the items below can be set.Start : Set day for "Always permit".End : Set day for "Always deny".F906i.book Page 260 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-11.png)
![262 GPS FunctionF906i_E1kou■When time after the current time is set as Start and one on the next day over 24 o'clock is set as End<Example> Start : "10:00", End : "02:00"■When time before the current time is set as Start and one on the next day over 24 o'clock is set as End<Example> Start : "08:00", End : "02:00"◆Making settings for using service <Service settings>1m [LifeKit] 763･For next procedure, contact a related service provider.◆Changing host of service usage setup site <Service host URL>Usually, you do not need to change this setting.Repeat Date "Always permit" periodNoneー06/02 10:00-06/03 02:00Every Day/Day of weekNone 06/02 or later10:00-02:00 next daySpecify start dateStart : 2008/06/0106/02 or later10:00-02:00 next daySpecify start dateStart : 2008/07/0107/01 or later10:00-02:00 next daySpecify start/endStart : 2008/06/01End : 2008/06/3006/02-06/3010:00-02:00 next day (until 07/01 02:00)Specify start/endStart : 2008/07/01End : 2008/07/3107/01-07/3110:00-02:00 next day (until 08/01 02:00)Repeat Date "Always permit" periodNoneー06/02 09:00-06/03 02:00Every Day/Day of weekNone 06/02 09:00-06/03 02:0006/03 or later08:00-02:00 next daySpecify start dateStart : 2008/06/0106/02 09:00-06/03 02:0006/03 or later08:00-02:00 next daySpecify start dateStart : 2008/07/0107/01 or later08:00-02:00 next daySpecify start/endStart : 2008/06/01End : 2008/06/3006/02 09:00-06/03 02:0006/03-06/3008:00-02:00 next day (until 07/01 02:00)Specify start/endStart : 2008/07/01End : 2008/07/3107/01-07/3108:00-02:00 next day (until 08/01 02:00)F906i.book Page 262 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-13.png)
![263GPS FunctionF906i_E1kou1m [LifeKit] 764eSet the required itemseCHost : Select a host.･When "User setting" is selected, the items below can be set.User host : Enter up to 99 one-byte characters for the host.User host URL : Enter up to 100 one-byte characters for URL.Notify locationNotifying your current location informationYou can notify current location information to others (service providers applicable to Notify location function).･To use Notify location, a subscription to a service provider applicable to Notify location function may be required. And, you may be charged for using the service.･Notify location requires usage fee.･Notify location is unavailable while positioning with Position location or Location request, when FOMA terminal is out of service area or in Self mode. Notification by entering a service client is unavailable in Keypad dial lock.<Example> Notifying by entering a service client1m [LifeKit] 75122eEnter a service client ID in the service client ID field (up to 12 one-byte characters)egWhen positioning, blinks and the light turns on. The GPS alert sound is emitted and the vibrator operates on completion of positioning.･Positioning is stopped when f is pressed while a message is being displayed indicating that a location and phone number are sent or c or f is pressed while positioning.･Even if positioning is interrupted, the location information is notified under some timing.Notifying to saved service client : 1e1-5eg3Check send resulteg❖Saving service client to LCS clients listFor Notify location, a service client can be selected from a list of those saved, if any. You can also set so that your current location is notified to saved service client ID of a specified party by making a voice/videophone call.･Up to 5 items can be saved.･No LCS client can be saved, edited or deleted with UIM not inserted.1m [LifeKit] 7521e"<New LCS client>"･When checking a service client already saved, select the service client to check and press C to edit.･When deleting a service client already saved, press m and select "Delete". Similarly, a service client can be saved to phonebook, sent by infrared communication or iC transmission or copied/backed up to microSD card from a submenu.2Set the required itemseC･While "Quote phonebook" is selected from the submenu, a service client name and phone number can be quoted from a phonebook.Service client name : Enter the service client name in up to 16 two-byte (32 one-byte) characters.Service client ID : Enter a number specified by a service provider you subscribed to in up to 12 one-byte characters.･Numerals, "#" and " " can be entered.Phone number : Enter a phone number of the other party in up to 26 one-byte characters.･Numerals, "P", "T", "+", "#" and " " can be entered. You can set Notify when calling when a phone number is entered.Notify when calling : Set if you notify your location to a saved service client ID when making a voice/videophone call to that client.･Set to "ON" to notify the location when making a call.･Set to "Confirm each calling" to display a confirmation screen asking if you notify the location when making a call.F906i.book Page 263 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-14.png)
![264 GPS FunctionF906i_E1kou✔INFORMATION･Information is not delivered to the other party under some wave conditions.･Even with Notify location set in LCS clients list, location cannot be notified in the cases below.- When a call is made without notifying caller ID- When call is not connected because the other party is busy or out of service area･With 2in1 ON, location information is notified as Number A regardless of mode of 2in1.Loc. historyDisplaying histories of location information checkedYou can display histories of positioning performed by Position location, Location request or Notify location function. Using location information in the log, you can save location information in phonebook or create a message containing location information URL.･Up to 50 location histories are saved. When exceeding the limit, items are overwritten chronologically.1m [LifeKit] 73･Icon definitions. : Position location / (gray) : Location request/positioning failure / (gray) : Notify location/positioning failure2Select a history to displayUsing Location information : Place the cursor on the history to use and m1The next procedure→P253 "■Use location info menu"Deleting 1 item : Place the cursor on the history and m21e"Yes"Deleting selected items : m22eSelect the historieseCe"Yes"Deleting all items : m23eAuthenticatee"Yes"❖Reading Loc. history log details screen : Positioning date/time and function : Receiver name for Location request/Service client name for Notify location : Service client ID for Notify location : Location information : Requester's name of Location request : Requestor ID for Location request･From a submenu, you can display the Use location menu to use location information or delete histories. When phone number or mail address information of the requestor ID is contained in Location request history, the information can be saved to phonebook.✔INFORMATION･When positioning with Position location is stopped or fails, it is not saved in history. And, location information is unavailable from histories of failing positioning with Location request or Notify location.･When failed in positioning in Location request or Notify location, the location information is not displayed.･Location information, if any, saved in histories of Location request or Notify location is not sent to a service provider under some wave conditions.･When the requester ID of a Location request matches a phone entry, the requester name saved in phonebook appears.･The location information recorded in the Loc. history differs from the location information that was sent to the provide of the location or LCS client by wave conditions etc.Page/Total pagesLoc. history log details screen for Position locationF906i.book Page 264 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-15.png)
![265GPS FunctionF906i_E1kouSetting GPS◆Setting positioning mode･In "Standard mode", positioning is performed in a short period of time.･"Quality mode" takes time for positioning. As a result, it may provide higher accuracy than "Standard mode".<Example> Setting positioning mode for Position location1m [LifeKit] 742Setting positioning mode for Notify location : m [LifeKit] 7522Setting positioning mode for Location request : m [LifeKit] 76221 or 2◆Setting actions in positioning <Positioning alert><Example> Setting actions for Position location1m [LifeKit] 743Setting operation for Notify location : m [LifeKit] 7523Setting operation for Loc. request-accept : m [LifeKit] 7651Setting operation for Loc. request-verify : m [LifeKit] 76522Set the required itemseCRing alert : Set if you sound melody.･When "Melody" is set, select a melody.Vibrate alert : Set a vibrator operation pattern.Ring time (sec) : Set time in range of 0-30 seconds.･Set time in range of 0-20 seconds for Loc. request-verify.Light alert : Set a lighting or blinking pattern and color of the light.･"Sync melody" cannot be selected. "OFF" cannot be selected for the case of Loc. request-accept or Loc. request-verify.･When setting "Light pattern 1" or "Light pattern 2", light color cannot be selected.✔INFORMATION･When positioning is made again or retried with Position location due to wave conditions etc. only lighting/blinking of the light occurs.F906i.book Page 265 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-16.png)
![270 1SegF906i_E1kou✔INFORMATION･If UIM is not inserted, you unsubscribed to DoCoMo or made FOMA service inactive, you cannot watch or record 1Seg.･If you repeat 1Seg watching and recording in communication disabled state, 1Seg activation may be unavailable even with UIM inserted. In such a case, enable communication e.g., by moving to FOMA service area, and retry 1Seg activation.･1Seg watching is interrupted when i-αppli is activated. Every time you press T, you can switch 1Seg watching and i-αppli.･Note that DoCoMo assumes no responsibility whatsoever for any loss or modification of saved contents resulting from malfunction, repair or other handling of FOMA terminal.When changing the model of or repairing FOMA terminal, information (TVlink, information saved in the storage area, etc.) saved in the terminal cannot be transferred; you are recommended to maintain a separate record of such information.･Watching 1Seg long time while charging may reduce the battery pack lifetime.Channel settingBroadcasting stations and channels that can be received vary by the area. To watch 1Seg, you need to create a channel list that broadcasting stations and channels are saved, and set it according to the area.･Savable number→P471◆Creating Channel listChannel list should be created by either of the ways below.Use presetBroadcasting stations and channels that can be received are saved in advance by area. Select from the area list and set.Auto settingAutomatically search broadcasting stations and channels that can be received at the place where you are and set. Perform by extending the 1Seg antenna in terrestrial digital TV broadcasting service area.･The channels in the preset area cannot be watched in some places you watch. In that case, make Auto setting. Other channels than the ones in the preset area may be searched.<Example> Set by "Use preset"1m [1Seg] 7eC･When there is no Channel list, a confirmation screen for creating a list appears.2"Use preset"Creating by automatic search : a"Auto setting"e"Yes"eSelect an areaAuto setting starts and, upon completion, a confirmation screen appears.･Select "No" to display an auto-scanning channel setting screen. At this time, channel list is named after the date and time of setting.･A channel of the selected area is searched for by priority.･To interrupt the channel setting, press g and select "Yes".b"Yes"Channel list is registered.･You do not need to perform Step 3.3Select an areaeSelect a prefectureeSelect a local municipalitye"Yes"Channel list containing broadcasting stations available in the selected area is created.･In some cases, selection of a municipality is not required.F906i.book Page 270 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-21.png)
![2711SegF906i_E1kou✔INFORMATION･Operation on the screen while watching or recording 1Seg : m2･It takes approximately 60 seconds to search for channels in Auto setting. It may take longer time depending on the number of broadcasting stations and airwave conditions.･Auto setting performed near a noise source such as a PC or LCD TV may require a time.･While Auto setting is set, system sound is not generated.･Auto setting is unavailable while recording.◆Setting/Operating Channel list･You cannot Set Channel list to use while recording.1m [1Seg] 7A list of Channel list appears.･ appears before the channel list in use.Displaying Channel list while watching 1Seg : m2 on the 1Seg watching screen.2Place the cursor on a channel list and aChannel list to use is set and TV station list appears.･If setting while watching 1Seg, 1Seg watching screen appears immediately.✔INFORMATION･When there is only one Channel list saved, it is automatically set as the one to be used.❖Operating Channel listDuring Channel list display, the operations below are enabled.Displaying TV station list : Place the cursor on a channel list and g･You can watch by selecting the channel number.Updating Channel list : Place the cursor on a channel list and m4Next procedure→P270 Step 2 in "Creating Channel list"Deleting a channel list : Place the cursor on a channel list and m51e"Yes"Deleting all channel lists : m52eAuthenticatee"Yes"Changing a channel list name : Place the cursor on a channel list and m2eEnter a channel list name (up to 10 two-byte (20 one-byte) characters)eCSwitching remote controller numbers : Select a channel listePlace the cursor on a channel and m1eSelect a channel to switchDeleting a channel : Select a channel listePlace the cursor on a channel and m2e"Yes"･If only 1 channel is saved in a channel list, that channel cannot be deleted.✔INFORMATION･While watching or recording 1Seg, operations below are unavailable for a currently active channel list.- Deleting a channel list- Updating a channel list- Deleting a channel from a channel list*- Switching remote controller numbers**Operation is available if only recording 1Seg without watching.F906i.book Page 271 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-22.png)
![2731SegF906i_E1koucSubtitleAppear when there is subtitle information in the program.When displaying a subtitle on 1Seg watching screen (Horizontal standard screen), the subtitle appears instead of e-q.dData broadcastingDisplay data broadcasting or data broadcasting site of the program.eRemote controller numberIndicate a remote controller number of the currently selected station.While recording, appears next to the channel number indicating channel selection is unavailable. is not displayed on horizontal display.fBroadcasting multiple programs : Appear when multiple programs (service) are broadcasted on one channel. You can switch and watch the program.→P274gTime shift play : In time shift play : In time shift fast forward playhUP/DOWN selectioniBroadcasting station name/program nameA broadcasting station name appears during channel selection and a program name is displayed after selection.When a program being watched is interrupted, "Unavailable channel" appears.j1Seg reception levelk1Seg ECO mode : Appear when 1Seg ECO mode is on.lSound state : Stereo : Monaural : Main sound : Sub sound : Main sound+Sub soundmVolume : Displayed when voice output is available. : Appear when the sound is stopped regardless of the volume level. : Indicate that side keys [▲▼] can be used to adjust the volume. It does not appear on 1Seg watching screen (Horizontal full-screen).nRecording : Appear while recording. If recording time is set, the remaining time is also unavailable.oOFF timerWith OFF timer set, indicates remaining time or (until end time).･Remaining time is displayed if "End time" is set from Reserve program. When the remaining time is more than 99 minutes, only appears.pBrowser function state : Appear when 1-9, *, 0, # can be used to select an item in data broadcasting or data broadcasting site. At this time, one-key channel selection is disabled.qKey guidance : Indicate that, during concurrent execution of 1Seg watching and another function, T can be used to switch the function.✔INFORMATION･When going outside broadcasting service area while selecting a channel, a black screen is displayed for both video and data broadcasting.❖Operations enabled while watching TVSide keys [▲▼] : Adjust volumeSide key [▲] (1 second or more) : Gradually raise the volumeSide key [▼] (1 second or more) : Silent1-9, *, 0, # : One-key channel selection from TV station list*1I (Vertical screen) : Switch standard screen/data broadcasting full-screenI (Horizontal screen) : Switch horizontal standard screen/horizontal full-screen (with no icons)/horizontal full-screen (with icons)C : Activate Program guide i-αpplif : End 1Seg watching･On an exit confirmation screen, select "Yes" to end.Except for data broadcasting full-screenh : Select previous or next channel on TV station listh (1 second or more) : Search for previous or next frequency available*2a : Switch display/hide of the subtitleP (1 second or more), T (1 second or more) : Start/Stop video recording→P281P : Save still image→P282Data broadcasting full-screenh : Move to previous or next page*3Strong: Outside broadcasting service areaWeakF906i.book Page 273 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-24.png)
![2751SegF906i_E1kou･Sounds can be emitted from audio devices etc.→P283･When 1Seg ECO mode is ON, Light setting is disabled.･When OFF timer end time comes, a confirmation screen for ending the watching appears. When 30 seconds elapse without doing any operations, 1Seg watching stops.･If Activate 1Seg is started from information for 1Seg watching or Program guide displayed on watching reservation, site or mail, which specifies an end date/time, OFF timer is automatically set. After that, OFF timer can be reset while watching 1Seg.･When another channel is selected with OFF timer set to "Complete program", the end date/time set in OFF timer changes to the end date/time of the program broadcasted on the channel selected. Note that, the end date/time does not change unless there is information.･The receiver of the mail containing information for 1Seg Watching, if applicable to Media To function, can use the entered program information to watch the program.･If mail is created from a 1Seg watching screen, video display stops on vertical display. On horizontal display, Multi window starts.→P280･During 1Seg watching, system sound is not emitted.Using Program guide i-αppliYou can use Program guide i-αppli for selecting a program to start 1Seg watching or watching reservation or recording reservation.･"Gガイド番組表リモコン (G-GUIDE TV Remote Controller)" is saved as Program guide i-αppli by default.→P2321m [1Seg] 2Program guide available in the area you live are displayed.･When operating from a 1Seg watching screen, press C.･Press m to watch a program being broadcasted from the selected channel.･To exit Program guide i-αppli, use the procedure specified for each i-αppli.･For details, refer to "Mobile Phone User's Guide [i-mode] FOMA version".✔INFORMATION･When using Program guide i-αppli for the first time, you must make initial settings.･You can use "Program guide key setting" in Software settings of i-αppli to set up Program guide i-αppli. When Program guide i-αppli is downloaded and Program guide key setting are made, the downloaded Program guide i-αppli is activated.→P227Watching reservation/Recording reservationReserving 1Seg watching/recordingWatching reservation allows you to automatically activate 1Seg watching at the reserved date and time or notify the program start with an alarm. Recording reservation automatically starts recording at the reserved date and time.･Up to 100 watching and/or recording reservations can be saved in total, but the savable number varies by the number of saved items in Scheduler.→P471･You can also use channel information shown in Program guide i-αppli, site or mail to save reservations. In that case, a reservation saving screen already including a start date/time, end date/time, channel and program name may appear.◆Saving watching reservation1m [1Seg] 4eCeSet the required itemsSet Start time, End time, Channel, Program or Use as alarm.･End time or Program can be saved without setting.･Up to 100 two-byte (200 one-byte) characters can be entered for program name.･When setting Use as alarm to "Yes", 1Seg is activated after activation notification without displaying confirmation screen.･When setting watching time to 24 hours or more, is displayed in the upper-right corner of the set date on the calendar screen of Scheduler. And, is displayed below the individual watching reservation icons on the schedule list of the calendar screen, the day view screen or booking list of Booking list (Long-term schedule).2h to switch to Notify start time screeneSet the required itemsSet Notify start, Notify in advance, Alarm setting or Sync TV start.･When setting Notify start to "No", notification or activating 1Seg is not performed even when Start time comes. Note that it is displayed in Scheduler and Booking list.･Notify in advance sets the time to display Notify start.･When setting Alarm setting to "Yes", Notify start appears for one minute and an alarm sound is emitted.F906i.book Page 275 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-26.png)
![276 1SegF906i_E1kou･Alarm sound can be selected. When "Melody" is selected, select an alarm sound; when "Phone setting" is selected, Schedule reminder of Ring alerts & Sounds is used.･Sync TV start sets whether 1Seg watching starts or not after activation notification. When setting Use as alarm to "No", a confirmation screen appears after activation notification.3h to switch to Other settings screeneSet the required itemsRepeat : Set repetition of operation of watching reservation. When "Day of week" is selected, select "Day/Week" and select a day of the week.･If Repeat is set, is displayed in the upper-right corner of the set date on the calendar screen of Scheduler. And, is displayed below the individual watching reservation icons on the schedule list of the calendar screen, the day view screen or booking list of Booking list (Repeat schedule).4Ce"Yes"･When watching reservation is set, appears on the stand-by display.◆Saving recording reservation1m [1Seg] 4eaeSet the required itemsSet Start time, End time, Channel or Program.･Program can be saved without setting.･Up to 100 two-byte (200 one-byte) characters can be entered for program name.･When setting recording time to 24 hours or more, is displayed in the upper-right corner of the set date on the calendar screen of Scheduler. And, is displayed below the individual recording reservation icons on the schedule list of the calendar screen, the day view screen or booking list of Booking list (Long-term schedule).2h to switch to Other settings screeneSet the required itemsSet Repeat, Priority or Record to:.･When "Day of week" is selected by Repeat, select a day of the week by "Day/Week".･If Repeat is set, is displayed in the upper-right corner of the set date on the calendar screen of Scheduler. And, is displayed below the individual recording reservation icons on the schedule list of the calendar screen, the day view screen or booking list of Booking list (Repeat schedule).･By Priority, set whether to start recording automatically while using the function that cannot be used at the same time with recording, and set whether to display the confirmation screen for recording.･By Record to:, select the saving destination for the recorded movie from FOMA terminal or microSD card.3Ce"Yes"･When setting recording reservation, appears on the stand-by display.･If you make a recording reservation in default state, a confirmation screen for the radio wave conditions at recording start and recording appears. If you select "Yes (Confirm once)", a confirmation screen for recording instead of radio wave conditions and recording appears from the next recording reservation.✔INFORMATION･Watching reservation and recording reservation are also saved to a schedule of Scheduler. Note that Scheduler cannot be used to view, edit or delete details of reservation.･With Alarm setting set to "Yes", the alarm sounds for one minute after displaying activation notification. 1Seg watching is not activated while the alarm sounds. If you want to activate 1Seg watching exactly on the start time, set Notify in advance to "1 min before".･When Channel list is not set, no reservations can be made.･You cannot set the start date and time of recording reservation between the current time and 2 minutes later.･Even if Priority is set to "Operation", when recording not during 1Seg watching, the confirmation screen does not appear even if the date and time for recording reservation come and it starts automatically.F906i.book Page 276 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-27.png)
![2771SegF906i_E1kou◆When the reserved date and time come❖When the time set in watching reservation comesThe saved reserved contents appear on the display.･With Alarm setting set to "Yes", the volume, vibrator and light operations are the same as those for schedule reminder.･Pressing f while the alarm is sounding stops the alarm and returns to the previous screen.･When pressing f or any key except side key [▼] while the alarm sounds, you can display activation confirmation screen or activate 1Seg watching.･When the time set in watching reservation comes while recording, a confirmation screen for watching appears. If a channel to watch is different from the one being recorded, confirmation screens for ending recording and starting watching appear.✔INFORMATION･Display operations for the reserved contents are the same as those for the schedule reminder.･When multiple watching reservation items or schedules are saved, the alarm of the watching reservation or schedule saved the last becomes effective. 1Seg watching may not be activated according to Sync TV start depending on the order of saving. The Schedules or watching reservation not activated can be confirmed by pressing h after the alarm sound is stopped.･When the specified date and time come during a call or PushTalk session, a warning sound instead of alarm sound is emitted and the activation notification screen appears. At this time, even if Use as alarm or Sync TV start is "Yes", 1Seg watching is not automatically activated. Pressing g on the activation notification screen can display the activation confirmation screen or activate 1Seg watching. Note that 1Seg watching cannot be activated unless a call or PushTalk session is finished.･During a fake call, when the specified time that Use as alarm is set to "Yes" and Alarm setting is set to "No" comes, the activation notification screen appears with no sound.･When pressing s while the alarm sound is emitted or there is an incoming voice call, 1Seg watching is not activated automatically. Pressing g can display the activation confirmation screen or activate 1Seg watching.❖When the time set in recording reservation comesRecording automatically starts and appears.･Recording reservation starts 1 minute before the start date and time to prepare for recording. blinks.･To cancel recording, activate 1Seg watching and perform operations to cancel recording.Activating 1Seg watching→P272Canceling recording→P281 Step 2 in "Recording video"✔INFORMATION･Preparations for recording are made under poor condition of airwave reception, and recording is started when the wave reception condition becomes better.･When reserving times are overlapped, a reservation with earlier start time is interrupted by the one with later start time. Note that, if the start times are the same, the later reservation is given priority.･When making recording reservation without displaying the confirmation screen for using 1Seg, recording is not performed even when the specified time comes.→P272･In case the saving destination is microSD card, recording may not be performed while functions such as PDF data browsing with a heavy workload on FOMA terminal or other functions using microSD card are operating.･When reserved recording starts during the operations of the functions below, according to Priority (→P276), either the operation is interrupted and the recording is started or a confirmation screen for interruption of operation and start of recording appears. For the function that the operation is interrupted, the data currently edited may be discarded.- Camera, Sound recorder, Bar code reader- Play of Music player, Download of music data-Some i-αppli (A confirmation screen appears regardless of Priority).◆When reserved recording endsWhen reserved recording ends, an icon indicating the result of reserved recording appears on stand-by display. You can select the icon to check Recording result.･Recording result icons are shown below. : Completed recording reservation : Failed in recording reservation･When performing multiple reserved recordings, the icon of the last recording result appears.･The saving destination, file name and conditions of programs that cannot be recorded are the same as those for recording while watching.→P281･Recorded video can be played from completed Recording result.F906i.book Page 277 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-28.png)
![278 1SegF906i_E1kou◆Checking/Operating reservation1m [1Seg] 4The booking list appears.Displaying reservation details screen : Select the reservationEditing reservation : Place the cursor on the reservation and m3eEdit the reservationeCe"Yes"･To edit from reservation details screen, press C.Deleting reservation : m4e1-3e"Yes"･To delete 1 item, operate by placing the cursor on the reservation.･When "All past items" is selected, all reservations for the past date and time are deleted.･When "All items" is selected, perform authentication.･To delete 1 item from reservation details screen, press m4.Sorting reservation : m5e1 or 2･"Air date(new→old)" sorts from the earlier reservation to later, and "Air date(old→new)" sorts from the later reservation to earlier.✔INFORMATION･Reservations with the start date/time already passed appear after those not passed, unless sorted.◆Checking result of reserved recording <Recording result>･Up to 50 items can be saved. When exceeding the limit, items are overwritten chronologically.1m [1Seg] 5Recording result list appears.･The list shows recording result icon, program name, broadcasting station name and recording start date and time.･Recording result icons are given below. : Completed recording reservation : Failed in recording reservation2Place the cursor on a history and CDetails of Recording result appear.･Recording result, reason of failure (only for failure), broadcasting station name, program name, recording start time and recording destination can be checked.Playing recorded program : Place the cursor on the completed history and g･Playing is unavailable when recorded program is moved or deleted.Deleting 1 history : Place the cursor on the history and m1e"Yes"Deleting all histories : m2eAuthenticatee"Yes"✔INFORMATION･Recording reservations canceled because they were duplicated with other reservations or because FOMA terminal was not turned ON at the start time are not recorded in Recording result.Data broadcastingUsing data broadcasting1Seg allows you to use data broadcasting as well as video and sound. Various information containing still images and/or videos, such as a site linked with a program, can be used.1On 1Seg watching screen (standard screen) or data broadcasting full-screen, jeSelect the required itemsData broadcasting is shifted to data broadcasting site display.Data broadcasting and data broadcasting site→P268"Before Using 1Seg"Operations while displaying the screen→P273･Each time you press I, standard screen and data broadcasting full-screen are switched.･Also during data broadcasting, 1Seg sound is emitted.･For some selected items, confirmation screen for connecting to site or website, starting downloading , activating other functions, etc. appears. Select "Yes" to use the function. If you select "Yes (Always)", the confirmation screen does not appear for using the same function from the next time, and the information of data broadcasting/data broadcasting site may be updated automatically. Note that, packet communication fee may be charged at this time.･You can make data broadcasting operations from a submenu.m81 : Return to previous pagem82 : Go to next pageF906i.book Page 278 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-29.png)
![2791SegF906i_E1koum83 : Read the current page againm84 : Display details of certificate→P172m85 : Set images and sound effects for data broadcasting site→P172m87 : Return from a data broadcasting site to data broadcasting✔INFORMATION･When empty space in the storage area is not enough, a confirmation screen for overwriting appears. When overwriting, follow the instruction on the screen.･You can set the image for the data broadcasting site, a data broadcasting site or the sound effect for the data broadcasting also by pressing m [1Seg] 832 on the stand-by display.･With Close setting for data broadcasting and data broadcasting site set to "Continue" or "Mute", information may be updated even when FOMA terminal is folded, requiring packet communication fees.TVlinkUsing TVlinkFor some data broadcasting and/or data broadcasting site, site and memo information can be saved in TVlink. The site or memo information saved in TVlink can be directly displayed.･Saved contents can only be used by operating from 1Seg. They cannot be used from i-mode or Full Browser.◆Saving in TVlinkWhen selecting a savable item in TVlink, a confirmation screen for saving it in TVlink appears.･Savable number→P4711Select a savable item in TVlinke"Yes"eSelect a folder･When trying to save the same URL or memo information, a confirmation screen for overwriting appears.✔INFORMATION･When empty space in the storage area is not enough or exceeding the savable number, a confirmation screen for overwriting appears. When saving, follow the instructions on the screen to overwrite TVlink.◆Displaying saved TVlink1m [1Seg] 6eSelect a foldereSelect a TVlink･Icon definitions : : Folder : Empty folder : Link to data broadcasting site : Link to site or website using i-mode or Full Browser : Text information･When selecting memo information, a memo screen appears.･TVlink list can be displayed also in the ways below.- Press m86 on 1Seg watching screen- Press m2 when data broadcasting site is displayed from TVlink list- From data broadcasting or data broadcasting site, select a link to display TVlink list2"Yes"Displaying details screen : C✔INFORMATION･For some data broadcasting or data broadcasting site, a confirmation screen for automatically displaying TVlink list appears when displaying a site.Managing TVlinkYou can move or delete TVlink or arrange them using folders.･Up to 20 folders can be created.1m [1Seg] 6Deleting a TVlink : Select a folderePlace the cursor on a TVlink and m21e"Yes"Deleting selected TVlinks : Select a folderem22eSelect a TVlinkeCe"Yes"Deleting all TVlinks in a folder : Select a folderem23eAuthenticatee"Yes"Deleting all TVlinks : m4eAuthenticatee"Yes"Moving a TVlink : Select a folderePlace the cursor on a TVlink and m31eSelect a folder to move toMoving selected TVlinks : Select a folderem32eSelect TVlinkseCeSelect a folder to move toF906i.book Page 279 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-30.png)
![282 1SegF906i_E1kou- When the date and time specified in Alarm clock or schedule*1 come- When mail, MessageR/F is received (with Display priority of mail set to "Show message")- When a melody is played- When i-motion is played/displayed-When i-αppli is activated from data broadcasting*2*1For watching reservation schedule, if you select "Yes" on a confirmation screen for stop of recording and activation of watching, recording is stopped if the channel is different from the one being recorded. If the reserved channel is same as the one being recorded, recording continues.*2A confirmation screen for watching and continuation of recording appears.･In the cases below, movie and sound are interrupted and recording stops. After the related functions end, you can restart 1Seg watching.-When i-αppli that cannot be used concurrently with recording is started (A confirmation screen for watching and continuation of recording appears)･When selecting a link to 1Seg watching information displayed on a site or mail while recording, select "Yes" on a confirmation screen to stop recording and start watching the channel specified in the information for 1Seg watching. If the channel specified by the information for 1Seg watching is the same as the one being recorded, recording continues.･When the time for recording reservation comes while recording, recording reservation starts. When the channel currently recording and the channel for recording reservation are different, a confirmation screens for changing the channel and starting recording reservation appears if Record setting of recording reservation is "Operation".･When recording data broadcasting for later viewing, record it at least 1 minute or more under good wave reception conditions. If the recording time is too short, data broadcasting may not be displayed.･If FOMA terminal goes outside broadcasting service area immediately after starting recording and the recording is stopped without receiving the airwave, the recorded data may not be saved.･For some programs, movie and/or sound may be recorded from a point a little before recording operation is done.･While performing a function that cannot be activated at the same time as recording, a confirmation screen for interruption of operation and start of recording appears.◆Recording still image･Recording is unavailable during video recording or on a data broadcasting full-screen.1On 1Seg watching screen, PWhen exceeding the savable number/area→P322✔INFORMATION･When there is an incoming videophone or PushTalk call immediately after pressing P, still images may not be recorded.･Subtitles or data broadcasting are not saved.User settingMaking various settings related to 1Seg watching◆Setting screen or sound1m [1Seg] 82Set the required itemsSetting screen : 1eSet the required itemseCSet Light setting, Display subtitle, Subtitle size, Subtitle language and Incoming msg ticker.･If setting Display subtitle to "In silent mode", subtitle appears when "No" is selected from a sound play confirmation screen appearing when watching 1Seg in Silent mode.･For horizontal standard screen, the subtitle size remains unchanged.･By Incoming msg ticker , set if you display ticker according to Message display setting of Receive display option or not display.･While watching 1Seg, setting can be made by m91Setting sound : 2eSet the required itemseCSet Switch sound and Main <> sub sound.･While watching 1Seg, setting can be made by m92✔INFORMATION･Display light is not applied while 1Seg ECO mode is ON.◆Setting Data broadcasting <Data broadcasting>･If you reset permit status, a confirmation screen starts to be displayed when displaying a site from data broadcasting.1m [1Seg] 83F906i.book Page 282 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-33.png)
![2831SegF906i_E1kou2Perform necessary operationSetting connection timeout : 1e1-3You can set a maximum waiting time for connection from data broadcasting to a site.･These settings are reflected to i-mode Connection timeout.Deleting information in the storage area : 3ePlace the cursor on affiliate broadcasting station or individual enterprise and me1 or 2e"Yes"･When there are storage areas of individual enterprises, select an affiliate broadcasting station.･When "Delete all items" is selected, perform authentication.Resetting permit status : 4eAuthenticatee"Yes"･Set to display confirmation screens again for 1Seg watching, reserved recording, etc.◆Setting actions when FOMA terminal is closed <Close setting>1m [1Seg] 84e1-3･When "Continue" is selected, 1Seg watching or recording continues.･When "Mute" is selected, 1Seg watching continues with the sound silent.･When "Recep:End/REC:Cont" is selected, only 1Seg watching ends and recording continues.･While watching 1Seg, setting can be made by m94･Close setting is applied also while playing the recorded video. Note that, when "Mute" is selected, play is paused.◆Setting operations for recording 1Seg1m [1Seg] 85eSet the required itemseCSet recording destination and Record time.･Set recording destination from FOMA terminal or microSD card.･Record time is the time from starting recording or changing the setting of recording until recording ends.･It is unavailable for recording reservation.･While watching 1Seg, setting can be made by m93✔INFORMATION･With Close setting for data broadcasting and data broadcasting site set to "Continue" or "Mute", information may be updated even when FOMA terminal is folded, requiring packet communication fees.･Recording destination of Record setting is applied from the recording performed after the setting. Record time is applied from the time of setting.Remote controller with microphoneUsing remote controller with microphone F01You can use the switch of the remote controller with microphone F01 (optional) to operate 1Seg watching.R (In time shift fast forward play) : Time shift ordinary playR (1 second or more)*1 : End 1Seg watching+- : Adjust volume+ (1 second or more) (while watching) *2 : Select next channel+ (1 second or more) (In time shift play)*2 : Time shift fast forward play- (1 second or more) (watching) *2 : Select previous channelW (Slide in the direction of ▼) : Disable R, + and - keys.W (Slide in the opposite direction of ▼) : Enable unavailable keys*1During data broadcasting site display, the site also ends. During recording, only watching stops.*2This is available while data broadcasting site display.FM transmitterListening to music of 1Seg with audio device or car stereoYou can transmit the sound of 1Seg over FM radio wave and listen to it with home audio device or car stereo.F906i.book Page 283 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-34.png)
![284 1SegF906i_E1kou◆Setting FM transmitter frequency <FM transmit frequency>･Set a frequency not to overlap with FM radio stations in the area you use FOMA terminal.･This setting is shared with FM transmitter for Playing music.1m [Settings & NW services] 18e1-9◆Transmitting sound of 1Seg over FM radio wave1On 1Seg watching screen or data broadcasting full-screen, m6･On video play screen, press m5Stopping FM transmission : On 1Seg watching screen or data broadcasting full-screen, m6･On video play screen, press m5✔INFORMATION･Because FM transmitter uses weak waves requiring no licenses for radio stations, the sound may become noisy or interrupted by the installation conditions of the FM transmitter and receiver devices, antenna positions and environmental conditions.When there is such noise or interruption, change the direction of FOMA terminal for the better sound. However, noise or interruption of sound may not be resolved by changing FOMA terminal direction.･Obstacles, if any, between FM terminal and receiver device or metal pieces placed near FOMA terminal may cause noise or interruption in sound.･FM transmission continues even when other functions are activated by Multitask. Movies/i-motion or melodies, if any, played with other function use the speaker of FOMA terminal, muting FM wave until the playing ends.･FM transmitter is also available out of service area. However, FOMA terminal must be placed in FOMA service area at least once after turning ON.･When doing the things below during FM transmission, FM transmission is interrupted.- Connecting an earphone etc.- Connecting an external device using USB cable･FM transmission is unavailable overseas.F906i.book Page 284 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-35.png)
![286 Full BrowserF906i_E1kouFull BrowserViewing websites for a PCYou can connect to Internet to view websites created for a PC.Framed, CSS and SSL/TLS supporting websites can also be viewed.･Communications of large-size data such as viewing websites containing many images and downloading require high charges. For details of packet communication fees and charging plans, refer to "Mobile Phone User's Guide [i-mode] FOMA version".･Full Browser supports the functions and technologies below.Frame : A frame for dividing a web page or a website configured with frames. A website with some frame configurations may not be fully displayed.Cookie : A function that saves website-specified information such as the date and time the website appears and the number of the times it is visited in FOMA terminal. Based on such information, various functions on the website can be easily used.CSS : A standard that defines the layout of web pages.JavaScript : A language for creating websites.Referer : URL information of a website from which a link is selected to move to a website specified in it.SSL/TLS : A technology for securing safe data communications with authentication/encryption. A website that supports SSL/TLS has URL beginning with https://. In some cases, it is used in a part of a website.<Example> Connecting to website at specified address (URL)1I9231eEnter a URL (up to 512 one-byte characters)eC･When Access setting is set to "No" such as by default, the Access setting screen appears.→P292･From the second time, the URL previously connected appears.･Press c or m9 to stop connecting or m8 to stop connecting with multiple windows.Connecting to Home : 1Registering URL for Home connection→P291Displaying from bookmark : 2eSelect a foldereSelect a bookmark to displayCreate or delete the folder to register a bookmark.→P163 Step 2 in "Creating/Deleting folders"Register bookmark to Access shortcuts.→P164 Step 2 in "Registering bookmarks in Access shortcuts"Connecting from Entry URL log : 32eSelect a URLOperation from Entry URL log→P162Connecting to Browser history : 4eSelect a URLOperation from Browser history→P1593After reading a website, fe"Yes"✔INFORMATION･The functions below are not supported.-Plug-in- Saving screen memos- Phone To (AV Phone To), SMS To, Media To･Some websites may take extra time to be displayed or not be displayed correctly.･When displaying a site including an image, the icons below may appear instead of the image. : When Set image display is "Not display" in Image&Effect settings : When the image data is invalid or the image cannot be found, or when the image cannot be received because FOMA terminal goes out of service area during reception : When the image cannot be displayed for an incorrect URL etc.･Mail To and Web To functions can be used from mail addresses and URL, respectively.･The volume while playing Flash graphics can be adjusted by s84.･If no operations are performed for more than 5 minutes, playing Flash graphics ends.･Flash animation of Flash graphics is applicable to up to 1 Mbyte per page, and Flash®Video is applicable to up to 10 Mbytes per item.･Applicable to files of up to version equivaleut for Flash8. Note that, ever for relevant file, playing may be unavailable for some sites.F906i.book Page 286 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-37.png)
![289Full BrowserF906i_E1kou❖Switching to drag mode for operationYou can switch to drag mode while pointer display to operate contents available in drag mode.･Operations available in drag mode vary by contents.1Move pointer onto contentseg (1 sec. or more)Pointer changes from to , and you can operate contents with k.Canceling : g (1 sec. or more)･Pressing g also cancels.◆Displaying a framed websiteWhen a framed website appears, thumbnail screen appears allowing to view the entire configuration. Individual frames can be enlarged for viewing.1On the frame thumbnail screen, select a frame to enlarge･Use k to move the frame.･Press c to return to the frame thumbnail screen.✔INFORMATION･Frames requiring authentication appear with a yellow border and those with problem elements detected by Scanning function appear with a red border.･While displaying frame thumbnail, the operations and settings below are unavailable.- Displaying pointer on the frame thumbnail screen- Scrolling screen- Search in page- Save image, PDF data, Word, Excel or PowerPoint files-Link display- Section map check/setting◆Displaying multiple websites <Multi window>You can view a website selected from up to 5 displayed websites.<Example> Displaying a website link on a new window1On the Full Browser screen, place the cursor on the link and C36･Press side keys [▲▼] to switch windows. A window to switch to can be selected from a window list display by pressing side keys [▲▼] for 1 second or more or pressing C1.･To close the current window, press C2 and select "Yes".◆Searching the character string on website･Search method is set to "Partial match", and Case-sensitive is set to "No" by default.1On Full Browser screen, 0eEnter characters in the search field (up to 20 two-byte (40 one-byte) characters)The set character string is searched for and character strings matching the entered string are highlighted.･Press I to move to the previous option and a to move to the next option (matched string).･Press C to end searching.Setting search method : On Full Browser screen, 0emeSet the required itemseCSearch method : Select "Partial match" or "Exact match" for Search method.Case-sensitive : Select if you make case-sensitive search.✔INFORMATION･Some websites may not be searched.･When the search result and search fields are overlapped, press C for viewing.In thumbnail displayIn frame enlarged displayOn stand-byDisplayingF906i.book Page 289 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-40.png)
![294 Data Display/Edit/ManagementF906i_E1kouMaking full use of imageDisplaying image･Images (JPEG or GIF format), animations (GIF animations or Flash graphics), and created animations can be displayed. Note that, images with horizontal and vertical (or vice versa) sizes larger than 864×480 in GIF format or larger than 1,728×2,304 in JPEG format cannot be displayed.1m [Data Box] 1eSelect a folder･The folder contents are as given below.Camera : Images shot with Camera or cut out of movies/i-motion or PDF datai-mode : Images downloaded from sites, websites, i-mode mail or i-αppli or saved by Music playerDeco-mail picture : Images stored by default, downloaded from sites, mail or i-αppli, or read with Bar code readerDeco-mail pictogram : Images stored by default or Deco-mail pictogram downloaded from the site･When obtaining an image conforming to the standard of Deco-mail pictogram (image size is 20×20, the file size is up to 90 Kbytes, permitted to attach to mail or output from FOMA terminal and JPEG or GIF format), it is stored to this folder. Images not conforming to the standards cannot be saved.Item : Frame images stored by default or frame or stamp images downloaded from sitesPreinstalled : Images stored by defaultData transfer : Images read with Bar code reader or acquired from microSD card or external devicesMy album : Images moved from another folder･Appears when album is added.→P317My album (Secrecy: ON) : My album with secret attribute ONSearch by i-mode→P298Switching to microSD card list : On the folder list, I2Place the cursor on an image･Icon definitions.aOriginated : Preinstalled : i-mode, Full Browser, Mail, i-αppli : Camera : Frame, Stamp : Data transferbType of imageNo icon : Still image : Created animation : GIF animation/Flash graphics : Image with location informationcFile formatNo icon : Created animation / : JPEG format image/Unavailable due to UIM operation restriction / : GIF format image, GIF animation/Unavailable due to UIM operation restriction / : SWF (Flash graphics)/Unavailable due to UIM operation restrictiondFile restriction / : File restricted/unrestricted･For thumbnail display screen, the display name of the image at the cursor position appears at the top of the display, and the image size and file size appear at the bottom of the display. And, when thumbnail display is unavailable, the icon is displayed as shown below. : No preview image : Unavailable : Unavailable due to UIM operation restrictionSearch by i-mode→P298Ia db c a db cThumbnail displayList displayF906i.book Page 294 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-45.png)
![295Data Display/Edit/ManagementF906i_E1kou3gThe image display screen of the vertical display shows the display name and comment.*For full-screen display, press any of m, C, c, a to return to the original display.･If you press j, you can switch to previous/next image.･Image is always in the full-screen display with the horizontal display.･The operations below are available while playing GIF animation, created animation or Flash graphics (except in full-screen display).g : Pause/PlayC : Slow play (Only during pause of created animation)m7 : Play from the beginning･An image with vertical and horizontal (or horizontal and vertical) size of less than 240×432 dots is displayed with horizontal and vertical size doubled. If the image becomes larger than the screen size when enlarged, the image is displayed, adjusted to the screen size. Press l to display in the actual size. Press r to restore the double-size display.Attaching to mail : a･When the file size is 90 Kbytes or less, a confirmation screen for pasting it to the mail text appears.･For some image or file size, a confirmation screen appears for converting to QVGA size.･For an image with location information, a confirmation screen for pasting location URL to the message text appears. Select "No" to attach only the image.Using the location information attached to image : m33(23 on image list of microSD card)The next procedure→P253 "■Use location info menu"Pasting location information to an image : m34(24 on image list of microSD card)ePaste the location informationeSelect an image to attach the location information toeCe"Yes"Pasting location information→P253 "■Paste/Attach/Send location menu"Deleting the location information pasted to an image : m35(25 on image list of microSD card)eSelect an image to delete location information fromeCe"Yes"✔INFORMATION･Still images larger than the screen size are displayed, adjusted to the screen size. With full-screen display, scrolling is performed automatically, and g can be used to pause/restart and * can be used to switch display/hide scroll bar.･For a JPEG format image larger than the screen size, press the cursor on the image list and press m0 or press g in vertical display to use enlarged display that enables zooming. During enlarged display, press k to scroll, m to zoom out by 20%, C to zoom in by 20%, and * to switch display/hide of the guide area and g to return to actual size display. Press m to restore to zoom from View actual size.◆Displaying slide showDisplay images in a folder sequentially in a full-screen.･You can use Settings to change the rate, display order, etc.→P2981m [Data Box] 1ePlace the cursor on a folder and m6･When display of all images is complete or you press one of c, m, I, C, a, the folder list screen reappears.◆Setting images to the stand-by display or phonebook<Example> Setting to the stand-by display1m [Data Box] 1eSelect a folderePlace the cursor on an image and m2Display nameFull-screen displayCommentImage number/Number of imagesI*F906i.book Page 295 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-46.png)
![296 Data Display/Edit/ManagementF906i_E1kou21e"Vertical view" or "Horizontal view"e"Yes"･For an image smaller than the screen size that can be enlarged, select "Yes (Same size)" or "Yes (Large size)".･If i-αppli stand-by display is set, a cancellation confirmation screen of the i-αppli stand-by display appears.Adding to phonebook : 2Phonebook new entry→P83Updating phonebook entry : 3eSelect phonebook entrySetting as Calling image : 4e1 or 2Setting as Video-phone image : 5e1-7･Images with size larger than 176×144 or images that cannot be output from FOMA terminal can be set only for outgoing/incoming image.Setting as Mail image : 6e1-4･The images set to Mail image also appear when MessageR/F or SMS is sent or received.Setting as Basic menu icon : 7eSelect a function or background･Flash graphics, images in "Item" folder or created animation cannot be set.･When Default MENU is except Basic menu, a screen appears for confirming to switch to Basic menu.◆Creating animationYou can select up to 9 items from the same folder to create an animation.･You cannot save still images larger than 480×864.･Still images saved cannot be displayed or edited individually. In addition, unless canceled, they cannot be saved to microSD card or external device or attached to i-mode mail to send.1m [Data Box] 1eSelect a folder2m41Canceling created animation : Place the cursor on created animation and m423Select images to save to Create animationSelected images are numbered - in the order of selections.m : Cancel all selections4CeEnter a display name (up to 36 characters)eCEditing still imagesEdit a still image, and save it as a new still image. Editing contents are as shown below.*Sound effect is emitted when pasting.･Image sizes that can be edited are as shown below.Specify the size of Change size, attaching mail (Large) of Size limitation : 8×8-1728×2304 dotsSpecify cut out size : 16×16-1728×2304 dotsSpecify cut out range : 16×16-1224×1632 dotsOther items than the above : 8×8-480×864 dots･The still images below cannot be edited.- Still images in "Item" or "Preinstalled" folder- Still images with mail attachment or output to terminals except FOMA terminals inhibited (except still images with File restriction set to "File restricted" on the local terminal)- Still images saved in microSD cardEditing item OverviewChange sizeSpecifying the size, or change the display size by zooming in/out･Up to 864×864 dots available for zooming in, and up to 8×8 dots available for zooming outClipSpecifying the size, or specifying the range and cut out the imageBrightness/ToneAdjusting brightness, or setting the image to monotone or sepiaEffectsSoftening, rotating or applying effect as if the image is sketchedReverse/RotateReversing or rotatingFrameAdding framePaste stamp*Pasting stampsPaste text*Pasting entered characters by specifying colors etc.CutSpecify the position by , and cut out the neighboring similar colorSize limitationChanging the file size to "Msg attach:Small" (up to 90 Kbytes) or "Msg attach:Large" (up to 2 Mbytes)･For images of 2 Mbytes or less, "Msg attach:Large" cannot be selected.AdjustAdjusting brightness or color balanceF906i.book Page 296 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-47.png)
![297Data Display/Edit/ManagementF906i_E1kou1m [Data Box] 1eSelect a folderePlace the cursor on a still image and C2Perform necessary operationChanging display size by specifying the size : m1e1-9･If the aspect ratio is different from that of the original image, a blue frame appears. Press m to change to the specified size without saving the aspect ratio, and press C to save the aspect ratio and put the image within the specified size. If moving the frame by k and pressing 9, the image can be cut out by the specified size.Changing display size by zooming in/out : m10eZoom out or in by heg･Press m/C to zoom out/in by 20 %. By the display on the upper right of the screen, the size after the change and the rate of zooming out/in can be checked.Cutting out by specifying the size : m2e1-9eMove the frame by keg･If pressing I, the frame size can be changed, and if pressing C, the vertical and horizontal sides of the frame can be switched. By the display on the upper right of the screen, the size after cutting out can be checked.･If pressing m, you can change to the screen for cutting out by specifying the range.Cutting out by specifying the range : m20eSpecify the upper left by k and geSpecify the lower right by k and CegChanging brightness : m31eAdjust the brightness by heg･If pressing m/C, brightness can be adjusted to the highest/lowest.Setting monotone/sepia : m3e2 or 3Applying effect : m4e1-6Applying sketch effect : m4e7 or 8eg･Effect can be adjusted by one step by h or to the highest/lowest by I / a. And, if pressing C, the thickness of the line can be changed.Reversing/Rotating : m5eReversing by k or rotating by m/CegAdding frames : m6eSelect a frameeg･If pressing m with the frames added, the frames can be rotated by 180 degrees, and if pressing j, the frames can be changed.Pasting stamps : am7eSelect a stampeSpecify the position byk and g･The same stamp can be pasted to multiple locations.･If pressing m, all the stamps can be erased.bCPasting text : am8eEnter text in up to 20 two-byte (40 one-byte) characterseSet the required itemseC･If setting Paste method to "By character", one character can be pasted each time you press g.bSpecify the position by k and g･The same text can be pasted to multiple locations.･If pressing m, all the texts can be erased.cCCutting out : m9ePlace on the color to cut out by k and geCChanging the file size : m0e1 or 2･You do not need to perform Step 3.Adjusting : aCbme1-7･By the display on the upper right of the screen, the selected adjustment type can be checked.･You can also change adjustment type by pressing j.･Effect can be adjusted by one step by h or to the highest/lowest by I/a.cC3ge"Save"Saved as a new still image in the same folder as the original still image.･When the image size after editing is 20×20 and the file size is 90 Kbytes or less, the image is saved to "Deco-mail pict" folder.･Select "As frame/stamp" to save the image for frame or stamp.✔INFORMATION･When the image size is larger than the display area as edited, the image is displayed with reduced magnification. However, images are displayed with the same magnification in Zoom in/out of Change size, Paste stamp or Paste text.F906i.book Page 297 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-48.png)
![298 Data Display/Edit/ManagementF906i_E1kou･After editing, the file size may become larger or the quality may be deteriorated. And, if displaying it on PC etc., the transparently displayed portion is displayed in white.･When selecting frame or stamp, some frame or stamp is not displayed because of the size of the image to edit.･When exceeding the savable number/area→P322Data Security ServiceStoring image in Data CenterBy using Data Security Service, images saved in My Picture of Data Box can be stored in Data Center on the network.･Data Security Service→P133･This is a charged service requiring subscription. When having not subscribed to this service, attempting to connect to Data Center displays the screen indicating that.･Images that the size per file exceeds 100 Kbytes cannot be saved or restored.･Up to 10 items can be stored by one operation.･For details of restoration, refer to "Mobile Phone User's Guide [i-mode] FOMA version".･Logs saved in Data Center can be checked.→P911m [Data Box] 1eSelect a folder2m56eSelect an imageeCe"Yes"eAuthenticateg : Cancel saving3Check the communication result･Display of the communication result disappears automatically in approximately 5 seconds.✔INFORMATION･Data in "Item" folder or "Preinstalled" folder of My Picture cannot be selected.SettingsSetting operating conditions of image･By default, Scale up image and Slide show random are set to "No", Slide show speed to "Normal" and other items to "Yes".1m [Data Box] 1em5eSet the required itemseC･When setting to "Yes", operations are performed as shown below.Display icons : Thumbnail display on the image list.Display title/Display number/Display comments : On image display screen, display name/image number and number of items/commentScale up image : Zoom in an image to fully display on the display area holding the image aspect ratio.Scale down image : Zoom out an image to display on the display area holding the image aspect ratio.Sound effect : Play sound effects set to an image. (except slide show)Auto scroll mode : Automatically scroll a still image that does not fit to a full-screen display.Slide show random : Display a slide show at random.✔INFORMATION･Operations from image list or image display screen : m9Searching by i-modeWhen "Search by i-mode" ( ) is displayed on a folder or file list display screen, you can easily connect to i-mode site and search for data given below.- Image, music, i-motion, melody, Kisekae Tool- Mail template-i-αppli<Example> Searching for Deco-mail picture1m [Data Box] 13e"Search by i-mode"e"Yes"You are connected to i-mode site.･"Search by i-mode" is displayed at the end of the list (for more than one page, displayed at the last page).2Select Deco-mail pictureThe selected data is saved to "Deco-mail picture" folder.･When a still image is searched from My Picture list or My Picture folders, the still image of a certain type may be saved to a folder different from the one used when selecting "Search by i-mode".F906i.book Page 298 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-49.png)
![299Data Display/Edit/ManagementF906i_E1kouMaking full us e of movie/i-mo tionPlaying movie/i-motion･In the formats below, movies/i-motion with image size of 48×48 - 640×480 can be played.1m [Data Box] 4eSelect a folder･The folder contents are as given below.Playlist : Playlist→P301Camera : Movies recorded with Camera, movies cut out of movie, Movie memos and sound recorded with Sound recorderi-mode : i-motion downloaded from sites or mail, i-motion cut out of i-motion or music data and i-motion compatible with contents transfer moved from microSD cardPreinstalled : Movies stored by defaultData transfer : Movie/i-motion (except i-motion compatible with contents transfer) acquired from microSD card or external deviceMy album : Movies/i-motion moved from other folders･Appears when album is added.→P317My album (Secrecy: ON) : My album with secret attribute ONSearch by i-mode→P298Switching to microSD card list : On the folder list, I2Place the cursor on a movie/i-motion･Icon definitions.aOriginated : Preinstalled : i-mode, Mail, i-αppli : Camera : Data transfer : VideophonebReplay restriction : No restriction / / : Restriction on the number of times/expiration/periodcFile type (white)/ (yellow)/ / : MP4/MP4 with bookmark/Partially saved MP4/Unavailable due to UIM operation restriction (white)/ (yellow) : ASF/ASF with bookmarkdFile restriction / : File restricted/unrestricted･For thumbnail screen, the display name of the movie at the cursor position appears at the top of the display, and the image size and file size appear at the bottom of the display. And, when thumbnail display is unavailable, the icon is displayed as shown below. : Movie/i-motion containing only sound (i-motion without image such as the one containing only voice of a singer), i-motion partially downloaded, i-motion that cannot be played due to replay restriction, sound recorded with Sound recorder : Movie/i-motion with thumbnail images unavailable : Unavailable due to UIM operation restrictionSearching by i-mode→P298Attaching to mail : aFile format (Extension) Encoding formatMP4(MP4, 3GP)Movie MPEG4, H.263, H.264Sound AMR, AAC, HE-AAC, Enhanced aacPlusASF(ASF)Movie MPEG4Sound G.726Thumbnail displayList displayIa db c a db cF906i.book Page 299 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-50.png)
![300 Data Display/Edit/ManagementF906i_E1kou3gaPlay volumebPlay time/Total time and the play position indicatorcPlay state : In play : In stop : In pausedFile type : Sound : MovieeZooming in/out display : Zoomed in display : Zoomed out display･For the movie/i-motion with a bookmark set, the confirmation screen appears for playing from the bookmark. Select "No" to play from the beginning or play stopped position.･For the movie/i-motion containing image, it is played in the full-screen display with the horizontal display.･While playing, the operations below are available.j, Side keys [▲▼] : Adjust volumeg : Pause/Play/Play from the beginning (In stop)h : Reverse/Fast play1 : Rewind for 10 seconds (Starting playing from the beginning if the time from it is less than 10 seconds)3 : Fast forward for 30 seconds (Starting playing from a point 1 second before the end position if the time to the end position is less than 30 seconds)C : Stopc : Return to list screen･The operations below can be performed while playing a movie/i-motion with chapter information.4/6 : Play from the beginning of previous/next chapterm2 : Playing by selecting a chapter･In pause, press h to display a tab for specifying position on the play position indicator. Move by h and press g to play from the specified position. Tab for specifying position moves by 1 minute each time you press h, but movie/i-motion longer than approximately 20 minutes can be moved by 5 minutes by pressing it for more than 2 seconds.･When playing is paused by pressing c or f or other functions, the play stop position is saved to play from the position next time. Information of play stop position for up to 5 items is saved to FOMA terminal or microSD card. When newer information is saved, older information is deleted. When playing while downloading data or in preview play, play stop position cannot be saved.Setting bookmark : During play, Ie"Yes"･Setting is unavailable to un saved movie/i-motion or i-motion with replay restrictions set.Canceling bookmark : In pause, ISwitching screen display from horizontal display : Press # during play･Pressing # switches the full-screen display and normal play screen. For movie/i-motion of 320×240 image size, the screen is switched in the order of full-screen display→wide display→normal play screen.･Press * on the full-screen or wide display to switch displaying and hiding the guide area.✔INFORMATION･For some i-motion on which "--:--:--" may appear as the full play duration on the play screen, fast-forwarding/rewinding, playing operation from the bookmark or play stop position, or playing using chapter information or tab for specifying position is unavailable.･When i-motion with replay restriction set is selected, the replay restriction state appears. When replay is unavailable due to the replay restriction, a message appears for confirming deletion (except before the replay period). When replay period or expiration is restricted, replaying is not available by changing the date and time of FOMA terminal.･When i-motion failed or interrupted in downloading and partially downloaded is selected, a confirmation screen for confirming to download the remaining data appears. When it cannot be downloaded by retry, partially saved data is deleted. For partially downloaded i-motion that the replay period or replay expiration expired, a confirmation screen for deleting appears and redownloading is unavailable.deabcF906i.book Page 300 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-51.png)
![301Data Display/Edit/ManagementF906i_E1kou◆Creating/Playing playlistsSaving and managing the titles of movie/i-motion.･Recordable number→P471･100 titles can be saved in 1 playlist.･Movie/i-motion saved in microSD card, movie/i-motion partially saved, or movie/i-motion title unavailable due to UIM operation restriction or replay restriction cannot be registered.❖Creating/Deleting playlist1m [Data Box] 4eSelect "Playlist" folder2m1When no playlist is created : "Yes"Changing name : Place the cursor on the playlist and m2eEnter the name (up to 10 two-byte (20 one-byte) characters)eCDeleting 1 item : Place the cursor on the playlist and m31e"Yes"Deleting selected items : m32eSelect playlists and Ce"Yes"Deleting all items : m33eAuthenticatee"Yes"3Enter the playlist name (up to 10 two-byte (20 one-byte) characters)eC･"PlaylistYYYYMMDD (year, month and day of creation)" is preset.4Select a foldereSelect a movie/i-motioneCe"Yes"❖Adding/Deleting titles of movies/i-motion to/from playlist1m [Data Box] 4eSelect "Playlist" foldereSelect a playlist2m31Canceling 1 item : Place the cursor on the title and m321e"Yes"Deleting selected items : m322eSelect title and Ce"Yes"Deleting all items : m323eAuthenticatee"Yes"31-3eSelect a foldereSelect a movie/i-motioneC･When "One item" is selected, go to Step 4 without pressing C.･When selecting "All items" and select a folder containing movie/i-motion data, a title of movie/i-motion that can be saved in the folder is selected.4"Yes"✔INFORMATION･Removing a title of movie/i-motion in a playlist does not delete the data itself. When movie/i-motion is deleted or moved to microSD card, they are removed from the playlist.❖Playing playlistYou can continuously play movies/i-motion starting from the selected title.･Fast forwarding/Rewinding, operation of playing from the bookmark or play stop position, playing using chapter information or tab for specifying position is unavailable.1m [Data Box] 4eSelect "Playlist" foldereSelect a playlist2Selecting title to play first･On the screen for playing, the icons ( / ) indicating the settings of Repeat play appear beside ones normally appear.･While playing, the operations below are available.g : Pause/Playj, Side keys [▲▼] : Adjust volumeI, Side key [▲] (1 sec. or more) : Play from the beginning of data (Press within 3 sec. from playing to play previous data)C : Stopa, Side key [▼] (1 sec. or more) : Play next dataSorting play order : m33ePlace the cursor on the title and I or aeCF906i.book Page 301 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-52.png)
![302 Data Display/Edit/ManagementF906i_E1kou◆Setting movie/i-motion to stand-by display or the phonebookSome types of movie/i-motion can be used for the settings below.*Except PushTalk ring alert･Movie/i-motion that replay restriction is set, or movie/i-motion that the file size is larger than 10 Mbytes are unavailable.･The movie/i-motion below are unavailable for phonebook, ring alert or incoming call image.- Other than the image size of 128×96, 176×144 or 320×240- ASF format- With ticker (text)- Those transferred to external devices and then returned to FOMA terminal- Those moved or copied from microSD card to FOMA terminal (including those moved or copied from FOMA terminal to microSD card and then returned) except i-motion compatible with contents transfer･Movie/i-motion for which Receive display of Detail information is "Unavailable" is not applicable to phonebook or incoming call image. And, movie/i-motion that Ring alert is "No" is not applicable to ring alert.<Example> Setting to the stand-by display1m [Data Box] 4eSelect a folderePlace the cursor on movie/i-motion and m221e"Yes (Same size)" or "Yes (Large size)"･If i-αppli stand-by display is set, a cancellation confirmation screen of the i-αppli stand-by display appears.Adding to phonebook : 2Updating phonebook entry : 3eSelect a phonebook entrySetting to ring alert : 4e1-9･When "Contact alert:Call" or "Contact alert:Mail" is selected, select a phonebook entry→Press CSetting to Movie alert (voice/videophone call)/Received mail image : 5e1-3✔INFORMATION･Operation from title list of playlist : m1Editing movie/i-motion･The movie/i-motion below cannot be edited. Downloaded i-motion may not be edited by encoding formats.- Movie/i-motion with File restriction set to "File restricted" (except movie set to "File restricted" on the local terminal)- i-motion with replay restrictions- Movie in ASF format･Edited movie/i-motion is saved as new data to the folder where the original data is saved. The cut out data is saved in "Camera" folder of My Picture. It also applies when movie/i-motion is attached to mail after editing.◆Cutting out still image (Capture)Specify a range and cut out as a still image.･The size of the still image cut out is same as the display size when it is played.1m [Data Box] 4eSelect a foldereSelect a movie/i-motion2At the position to cut out, m3eC･Pressing g resumes a play.Attaching to mail : At the position to cut out, m3ea･When the file size is 90 Kbytes or less, a confirmation screen for pasting it to the mail text appears.･For some image or file size, a confirmation screen appears for converting to QVGA size.Type Stand-by display Phonebook Ring alert Alert imageSound + Movie○×○*×Movie only○○×○Sound only××○×F906i.book Page 302 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-53.png)
![303Data Display/Edit/ManagementF906i_E1kou◆Cutting out movie/i-motion (Custom edit)Cut out from the beginning to the specified location.･Movie/i-motion that the file size is 11–2,048 Kbytes can be edited.1m [Data Box] 4eSelect a folderePlace the cursor on movie/i-motion and m41 appears below a replay time.･When data containing a ticker (text) track is cut out, the ticker (text) is deleted.2geg at the cutting positionc : Retry･For a file larger than 500 Kbytes, press m and select "Msg attachment S" to cut out a file of 500 Kbytes, press m and select "No settings to cut out a file approximately 1,000 bytes smaller than the maximum size. For a file of 2,048 Kbytes, press m and select "Msg attachment L" to cut out a file of 2,047 Kbytes.･When data is cut out up to the end without pressing g, the end point is set at the position approximately 1,000 bytes smaller than the maximum file size.3Enter the display name (up to 36 characters)eCPlaying : IAttaching to mail : a◆Specifying file size for cutting out movie/i-motion (Edit by size)Cut out a specified file size from the beginning.･Movie/i-motion that the file size is 11–2,048 Kbytes can be edited.･File size which you can specify is 10 K-2,047 Kbytes. The maximum file size varies by the movie/i-motion to be cut out.1m [Data Box] 4eSelect a folderePlace the cursor on movie/i-motion and m42･When data containing a ticker (text) track is cut out, the ticker (text) is deleted.2Enter size to cut out･For a file larger than 500 Kbytes, press m and select "Msg attachment S" to enter 500, or press m and select "Msg attachment L" to enter 2047.3Enter the display name (up to 36 characters)eCPlaying : IAttaching to mail : aSettingsSetting operating conditions of movie/i-motion･By default, View thumbnails is set to "Yes", Size adjustment to "Zoom", Repeat play to "ON", Backlight to "Always on", Volume to "Level 20", and Surround to "OFF".1m [Data Box] 4em5eSet required itemseCView thumbnails : Set if you use thumbnail display on the image list.Size adjustment : Set if you zoom in/out an image to fully display on the display area holding the image aspect ratio.Repeat play : Set if you repeat playing during playlist play.Backlight : Set lights operation during play. When setting to "Phone setting", it depends on the setting of Display light time (Normal use) of Display & Key light.･This setting is also reflected to Display light time (i-motion) of Display & Key light and Display light of Music&Video Channel.Volume : Set the sound volume during play.Surround : Set if you enable the surround effects during play. This setting is reflected to Movie (i-motion) in Stereo sound effect.Current file size/Maximum file sizeF906i.book Page 303 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-54.png)
![304 Data Display/Edit/ManagementF906i_E1kou✔INFORMATION･Operations from movie/i-motion list, title list of Playlist : m→"Settings"Compatible with contents transferMoving i-motion to microSD cardOf copyrighted i-motion items downloaded from a site, you can move those compatible with contents transfer to microSD card. It cannot be copied.･i-motion compatible with contents transfer can be moved only when "Moved to microSD" in detail information is set to "Yes" or "Yes (Same model only)".1m [Data Box] 4eSelect "i-mode" folderePlace the cursor on i-motion and m5421-3Moving selected i-motion : 2eSelect i-motioneC3Place the cursor on a destination folder and Ce"Yes"･For Selected items or All items, the move confirmation screen appears right after that.･When saving to a subfolder, select a folder→place the cursor on the subfolder to move to and press C. When selecting a folder with no subfolder, a confirmation screen for creating a subfolder appears.･On the selection screen of the destination folder, press a to move to Home folder.✔INFORMATION･If data is moved to a created folder, it may not be checked from other FOMA terminals.･While moving data, do not remove microSD card or turn the power OFF. It may make all data compatible with contents transfer in microSD card unavailable.･For moving selected or all items, i-motion incompatible with contents transfer is saved in "Movie" or "Other movie" folder of microSD card.❖Moving to folder in FOMA terminal or othersMoving i-motion compatible with contents transfer saved in microSD card･Moving is available only when installing the same UIM as when obtaining from the site or moving to microSD card (the model also must be the same for some i-motion).1m [LifeKit] 315eSelect a folderePlace the cursor on i-motion and m3e1 or 221-3Moving selected i-motion : 2eSelect i-motioneC3"Yes"Selected items are saved to "i-mode" folder of i-motion.Moving all data to phone memory : Authenticatee"Yes"Moving to folder : Place the cursor on a folder and Ce"Yes"･On the selection screen of the destination folder, press a to move to Home folder.Making full use of Chara-denDisplaying Chara-denDisplay the character to use instead of camera image during a videophone call. Also, a Chara-den can be set on the stand-by display to take specific actions when a missed call etc. exists.･Using Chara-den during videophone call→P691m [Data Box] 8eSelect a folder･The folder contents are as given below.i-mode : Chara-den downloaded from sitesPreinstalled : Chara-den stored by defaultMy folder : Chara-den moved from other folders･Appears if a folder is added.→P317F906i.book Page 304 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-55.png)
![305Data Display/Edit/ManagementF906i_E1kou2Place the cursor on Chara-denThe display name of Chara-den and an icon indicating details of the Chara-den are shown.aOriginated : Preinstalled : i-modebFile type / : AFD/Unavailable due to UIM operation restrictioncFile restriction : File restrictedMaking a Videophone call : IeEnter a phone number or press C and select from a phonebookeI･To make a call specifying conditions, enter a phone number and press m.→P59Setting as Substitute image : aSetting to the stand-by display : am3eSet the required itemseC･When "Action" or "Action of Parts" is set, you can select an action from the actions list. Selection is unavailable for some Chara-den.･When "Input" is selected, specify an action by entering digits to the entry field.･When setting Interval to "OFF", the action occurs only once.･If actions are set for Missed call or Unread message, but there is no Missed call or Unread message, the action set as ordinary occurs. When there are Missed call and Unread message with both set, both actions are repeated alternately; but if Interval is set to "OFF", the action for Missed call occurs only once.b"Yes (Same size)" or "Yes (Large size)"･If i-αppli stand-by display is set, a cancellation confirmation screen of the i-αppli stand-by display appears.3gj : Large size/Same size1-9 : Perform applicable action0 : Stop actiona : List actionsa (1 sec. or more) : Switch Action/Action of Parts･The current action type is indicated with icons below appearing in the lower-left corner in the screen. : Action : Action of PartsSettingsSetting operating conditions of Chara-den･By default, Display size is set to "Large" and Set lighting to "Terminal settings".1m [Data Box] 8em5eSet the required itemseCDisplay size : Set whether to enlarge.Set lighting : Set lights operation during play. When setting to "Terminal settings", it depends on Display light time (Normal use) of settings of Display & Key light.Making full u se of melodyPlaying melodies･Melody in SMF or MFi format can be played.1m [Data Box] 5eSelect a folder･The folder contents are as given below.i-mode : Melody downloaded from a site or a mailPreinstalled : Melodies for ring tone stored by default→P429Mail attach melody : Melodies for mail attachment stored by default→P429Data transfer : Melody read with Bar code reader or acquired from microSD card or external devicesMy album : Melodies moved from another folder･Appears when album is added.→P317Search by i-mode→P298Switching to microSD card list : On the folder list, IabcF906i.book Page 305 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-56.png)
![306 Data Display/Edit/ManagementF906i_E1kou2Place the cursor on a melody･Icon definitions.aOriginated / : Preinstalled, Mail attach melody/3D sound supported / : i-mode, mail/3D sound supported / : Data transfer/3D sound supportedbFile type / : MFi/Unavailable due to UIM operation restriction / : SMF/Unavailable due to UIM operation restrictioncFile restriction / : File restricted/unrestrictedSearching by i-mode→P298Attaching to mail : a3gIn the melody play screen, the display name of melody being played, played position and icon indicating sound volume are displayed.･While playing, the operations below are available.h, Side keys [▲▼] : Adjust volumej, Side keys [▲▼] (1 sec. or more) : Play previous/next melodyg, c : Stop◆Setting melody for ring alert･Melodies in "Mail attach melody" folder cannot be set as ring alert.1m [Data Box] 5eSelect a folderePlace the cursor on a melody and m2e1-9･When "Contact alert:Call" or "Contact alert:Mail" is selected, select a phonebook entry→Press C.SettingsSetting operating conditions of melody･By default, Volume is set to "Level 4", Light pattern to "Flash", Light color to "Lime", Vibrate to "OFF", Play position to "Play all", Play background to "Standard" and Stereo/3D sound to "ON".1m [Data Box] 5em6eSet the required itemseC･If setting Light pattern to "Light pattern 1", "Light pattern 2" or "Sync melody", the light blinks in multiple colors. Light color cannot be set.･When setting Play position to "Play portion", the melody is partially played.･When setting Play background to "Select", you can select an image saved in Image folders.･Settings to Stereo/3D sound are reflected to Melody in Stereo sound effect.✔INFORMATION･Operations from melody list or melody play screen : m8･Even if setting Lighting pattern to "Sync melody", or setting Play position to "Play portion", some melodies are not synchronized.cbaaMelody number/Number of melodiesCurrent play positionDisplay namePlay volumeF906i.book Page 306 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-57.png)
![308 Data Display/Edit/ManagementF906i_E1kou◆Installing/Removing microSD card･Be sure to turn FOMA terminal OFF in advance.･In the microSD card slot, do not install anything except microSD card. Do not install microSD card with scratches, deformation or stain. It may cause malfunction.･Install the microSD card correctly into FOMA terminal. You cannot perform operation such as copying or backing up data, if you have not installed microSD card correctly.･Be careful to avoid touching metal connectors of microSD card.･When installing/removing the microSD card, it may pop out of the slot occasionally.■InstallingOpen the cover in the direction of a and slowly install microSD card into the slot holding the microSD card printed surface downward (b). Install microSD card until it clicks and close the cover in the direction of c.■RemovingOpen the cover in the direction of a and press lightly the center of microSD card in the direction of d. Pull out the popped out microSD card straightly in the direction of e, then close the cover in the direction of c.◆microSD card folder structure■When displaying on FOMA terminal (m [LifeKit] 3)Data saved and the savable number in each folder are as given below. The savable number may be reduced by the capacity of microSD card.aMy Picture (up to 9,999 items can be saved)Still image shot with camera, JPEG of DCF standard, GIFOther images (up to 9,999 items can be saved)JPEG of DCF nonstandard, GIF animation, Flash graphicsDeco-mail pictograms (up to 9,999 items can be saved)Movies (up to 4,095 items can be saved)Movie/i-motionMovies (up to 1,000 items can be saved)i-motion compatible with contents transferOther movies (up to 9,999 items can be saved)Movie/i-motion containing only soundMelodies (up to 9,999 items can be saved)Music (Chaku-uta full® can be saved up to 1,000 items and WMA files can be saved up to 500 items)1Seg (up to 99 items can be saved)1Seg videobPhonebook/Schedule/Inbox/Unsent/Outbox/Note/Bookmark (up to 9,999 of the total of an individual item and backup data items can be saved)cMy Document (up to 999 items can be saved)PDF datadToruCa (up to 999 items can be saved)ei-αppli data (up to 1,200 items can be saved)fLCS client (up to 999 items can be saved)gDecome-Anime template (up to 9999 items can be saved)hOther (up to 999 items can be saved)Word, Excel or PowerPoint file, etc.acbedgfhedcabF906i.book Page 308 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-59.png)
![310 Data Display/Edit/ManagementF906i_E1kou･Naming rules for folders and files are as given below. Characters to use should be one-byte characters except "＊"."xxx" 001-999 (100-999 only for "xxxFJDCF")"xxxx" 0001-9999"xxxx" 0001-65535"zzz" 001-FFF (Hexadecimal)"a" A-Z (Upper case), 0-9, _ (Under bar)"＊" Arbitrary string✔INFORMATION･If you change or delete a folder name in a microSD card with a PC etc., FOMA terminal cannot correctly display data.Exchanging data between FOMA terminal and microSD card･Data given below can be moved or copied.- Image (except created animation), Deco-mail pictogram, Movie/i-motion, Melody, PDF data (except partially downloaded data), ToruCa (including details), Decome-Anime template, Word, Excel, PowerPoint data･Data given below can be copied or backed up.- Phonebook, Schedule, mail, Note, Bookmark, LCS client of GPS･1Seg video can be moved only to microSD card.･Moving the music data of Music→P345◆Checking the memory space of microSD card･If the memory space of microSD card is insufficient, data may not be saved. Operate after checking the memory space.1m [LifeKit] 3em✔INFORMATION･The actually available memory space of microSD card is smaller than the displayed memory space.･Size of data that cannot be recognized by FOMA terminal is also included in the used memory space.◆Moving/Copying data from FOMA terminal to microSD card･You cannot move or copy data whose output from FOMA terminal is inhibited (except data with File restriction set to "File restricted" on the local terminal or data in "Data transfer").･When phonebook is copied, none of saved movies or PushTalk phonebook is copied. Saved still images are copied, but they cannot be displayed on terminals except FOMA terminal.･Even if copying a mail with attachment files, the part of the files in excess of 100 Kbytes are not copied.･When schedule is copied, member list or image is not copied.･i-motion compatible with contents transfer can only be moved.→P304<Example> Moving/Copying images1m [Data Box] 1eSelect a folder2Place the cursor on the image and m5e4 or 5･Submenu names or item numbers vary by list screens. "Move/Copy"→Select "Move to microSD" or "Copy to microSD". For 1Seg Video(Phone memory) list, select "Move to microSD".･Before selecting "Copy to microSD", select "Data backup" on phonebook list, or select "Ir/iC/microSD" on Day view screen of schedule, or select "microSD"on LCS clients list. You do not need to perform Step 3.･On bookmark or mail list, select "Move/microSD" or "Move/Copy" before selecting "Copy to microSD"→"Copy one item"/"One item". You do not need to perform Step 3.･デコメ®For Decome-Anime template, select "Copy to microSD".31-3Moving/Copying selected items : 2eSelect imageseC4"Yes"F906i.book Page 310 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-61.png)
![311Data Display/Edit/ManagementF906i_E1kou✔INFORMATION･When data in My Picture, i-motion, Melody, 1Seg, Other or Decome-Anime template is moved/copied, the file name is automatically changed according to the rule for saving data to a PC. For some PDF data, the file name is changed.→P309･The memory size of the moved/copied still image may become larger than the size displayed on FOMA terminal. In this case, the size displayed on microSD card is the actual size.◆Backing up data saved in FOMA terminal to microSD card･Movies saved in phonebook cannot be backed up. Still images can be backed up, but not displayed.･Even if backing up a mail with attachment files, the files of the part in excess of 100 Kbytes are not backed up.･When schedule is backed up, watching reservation/recording reservation of 1Seg are not backed up.<Example> Backing up PIM data1m [LifeKit] 32e1-7em14eAuthenticatee"Yes"The selected data is merged collectively and backed up to microSD card.･When phonebook entry is backed up, PushTalk phonebook entry and User information data are also backed up.･Bookmark backup operation causes both the i-mode and Full Browser bookmarks to be backed up.･If the backup is stopped by pressing g, data already backed up is discarded.Backing up LCS client : m [LifeKit] 36eSelect a folderem16eAuthenticatee"Yes"･This operation is unavailable unless copy or backup data is saved to microSD card. On LCS clients list, press m82 to operate.✔INFORMATION･If backing up protected i-mode mail, the protection is canceled.･Backing up data of phonebook group with secret attribute set cancels secret attribute of group and sets secret attribute to phonebook entries of group.･Operations from phonebook list : m73･Operations from bookmark list : m542･Operation from mail list : m442(422 on unsent mail list)･Operations from List of notes : m96･Operations from calendar screen of Schedule : m93･Operations from Day view screen of schedule : m86◆Moving/Copying data from microSD card to FOMA terminal･Savable number→P471･When exceeding the savable number/area (data in Data Box)→P322❖Moving/Copying multimedia data･i-motion compatible with contents transfer can only be moved.→P3041m [LifeKit] 31e1-4, 6 or 7eSelect a folderePlace the cursor on the data and m3e1 or 221-3Moving/Copying selected items : 2eSelect a dataeC3"Yes"The data is saved to "Data transfer" folder of My Picture, i-motion or Melody.･Deco-mail pictogram is saved in "Deco-mail pict" folder of My Picture❖Copying PIM or LCS client･Backup data cannot be copied to FOMA terminal.<Example> Copying PIM data to FOMA terminal1m [LifeKit] 32e1-7Copying LCS client data : m [LifeKit] 36eSelect a folder2Place the cursor on the data and m11e"Yes"F906i.book Page 311 Monday, April 21, 2008 10:59 PM](https://usermanual.wiki/Fujitsu/FOMA-F906I.manual-7/User-Guide-946663-Page-62.png)