Fujitsu Technology Solutions SCENIC6651 personal computer User Manual A26361 K520 Z100 4 7619

Fujitsu Technology Solutions GmbH personal computer A26361 K520 Z100 4 7619

Manual Scenic 600 Oct 99 part 7

System expansionsA26361-K520-Z100-4-7619 41Installing/removing a chipcard readerOpen the system unit (see "Opening the system unit").Installing a chipcard readerRemove the protector panel at the front of the carrier.Push the chipcard reader board into the guide rail of the carrier with the component's sidetoward the panel.Fix the board with the screw.312Fix the cable on the chipcard reader (1) and on the connector for the chipcard reader on thesystem board (see the Technical Manual of the system board).Lift the chipcard reader into the system unit (2).Push the chipcard reader in the direction of the arrow (3) until it clicks into position. Pressdownward and toward the drive cage while doing so.iWith the chipcard reader connected, no devices may be connected to serial port 2.
System expansions42 A26361-K520-Z100-4-7619Removing a chipcard reader2314Pull the cable off the chipcard reader (1) and off the connector for the chipcard reader on thesystem board (see the Technical Manual of the system board).Press on the clip (2).Pull the chipcard reader in the direction of the arrow (3).Lift the chipcard reader out of the system unit (4).Installation opening for 2nd serial portAn installation opening for the 2nd serial port is provided on the back of the casing. As a result, thismeans no board slot is occupied.Insert a screwdriver into the opening and break out the pre-stamped installation opening bymoving back and forth.
System expansionsA26361-K520-Z100-4-7619 43Extensions on the system boardDetails of how and if you can upgrade the main memory or the processor of your PC are provided inthe Technical Manual for the system board. Below the necessary steps are described to enable youto work on the system board.Open the system unit (see „Opening the system unit“).Upgrading main memoryUpgrade the memory as it is described in the Technical Manual for the system board.Close the system unit (see "Assembling the system unit").Replacing processor and lithium batteryTo replace the processor and the lithium battery, you must remove the ventilation duct.Removing ventilation duct23411Press the clip together (1).Lift the ventilation duct slightly (2) and guide the ventilation duct out of the guide holes (3).Remove the ventilation duct from the unit (4).You have free access to the locations.Replacing processorMake the desired expansions (see the Technical Manual for the system board).
System expansions44 A26361-K520-Z100-4-7619Replacing lithium battery!Incorrect replacement of the lithium battery may lead to a risk of explosion.The lithium battery may be replaced only with an identical battery or with a typerecommended by the manufacturer.Do not throw lithium batteries into the trashcan. It must be disposed of in accordance withlocal regulations concerning special waste.Make sure that you insert the battery the right way round. The plus pole must be on thetop!123++++Lift the contact (1) a few millimeters and remove the battery from its socket (2).Insert a new lithium battery of the same type in the socket (3).Installing ventilation duct43122Lift the ventilation duct into the unit (1)Press the clip together (2).Insert the ventilation duct into the guide holes (3) in the power supply.Push the ventilation duct downward until the clip engages (4).Close the system unit (see "Assembling the system unit").
A26361-K520-Z100-4-7619 45Technical dataElectrical dataRegulations complied with: EN 60950 / VDE 0805UL 1950CSA 22.2 No.950Protection class: IRated voltage range: (selectable) 100 V to 125 V / 200 V to 240 VFrequency: 50 Hz - 60 HzMax. rated current• System unit with monitor socket:• Monitor socket (output)100 V -125 V/5.5 A200 V -240 V/3.0 A100 V -125 V/3 A200 V -240 V/1.5 AMaximum power draw in operation:Minimum power draw in operation:reduced by Windows 9xPower management advanced_Power draw in energy saving mode:Power draw in the 'ready' status< 60 W *)< 35 W *)< 30 W *)< 5 W *)Noise emission: Sound power level (LWAd) < 55 dB (A) *)*) These values only apply for a SCENIC 600 with the configuration below. When additional orother components are incorporated, the power consumption or the sound emission (LWAd) inenergy saving mode may exceed the requirements for the environment symbol ("Blue Angel")(30 W or 55 dB).Processor (512 Kbyte cache):Main memory:Floppy disk drive:Hard disk drive:CD-ROM drive:Graphics:LAN:Pentium III Processor at 600 MHz192 Mbytes1.44 Mbytes6.4 GByte32foldMatrox MGA G100 AGP10/100 MBit Ethernet Controller onboardDimensionsWidth/depth/height: 454 mm/475 mm/ 138 mmWeightin basic configuration ca. 11 kg (107.9 N) in basic configuration
Technical data46 A26361-K520-Z100-4-7619Environmental conditionsEnvironment class (3K2)Environment class (2K2) DIN IEC 721 part 3-3DIN IEC 721 part 3-2Temperature:• Operating (3K2)• Transport (2K2) 15 °C .... 35 °C-25 °C .... 60 °CCondensation in operating must be avoided.Clearance required to ensure adequate ventilation:• left-hand side• front• rearmin. 200 mmmin. 200 mmmin. 200 mm!Do not place several system units one above the other.
A26361-K520-Z100-4-7619 47Index22nd serial port, installation opening 42AAccessible driveinstalling 34removing 36Accumulator, disposal 4Activating, security measures 23Alphanumeric keypad 20Alt Gr key 21Anti-theft protection 24Assembling, PC 30Audio input 11Audio output 11BBattery 44disposal 4BIOS Setup 23security functions 24Board 3installing 31removing 31CCableconnecting 10disconnecting 10Cabling, PC 10Calculator keypad 20Casingassembling 30opening 29Casing lock 15CD-ROM driveindicator 19installing 34manual 28removing 36CE certificate 5Changingfloppy disk drive 37hard disk drive 38lithium battery 44Checkingrated voltage 14Chipcard reader 11
Index48 A26361-K520-Z100-4-7619indicator 20Class B Compliance Statement 5Cleaning 8Clearance 46Configuration, BIOS-Setup 23Connectingcables 10devices 10keyboard 12monitor 13mouse 12parallel port 12power voltage 14serial port 12Connecting to power voltage 14Contents of delivery 9Control key 21Courier 1Ctrl key 21Ctrl+Alt+Del 21Cursor control keys 20DDark screen 26Data protection 23Data, technical 45Date, not correct 27Devicesconnecting 10interface 11Dimensions 45Diskette 22write-protection 22Display, cleaning 8Disposal 4Drive 33Drive cover 15Drive, hard disk drive, installing 35EEarphone 11Electrical data 45Electromagnetic compatibility 5Energy saving 4Enter key 21Environmental conditions 46Environmental data 46Ergonomic, video workstation 10Errordate 27floppy 27mouse 27screen 26System unit 25
IndexA26361-K520-Z100-4-7619 49time 27Error message 27ESD 3Euro key 21Expansion 29External devicesconnecting 10ports 11FFCC statement 5First time, switching on 17Flashing power-on indicator 19Floppy disk drivechanging 37indicator 20removing 36Floppy disk, cannot be read or written 27Function keys 20GGame port 11Green, power-on indicator 19Guarantee coupon booklet 9HHard disk carrierinstalling 40removing 38Hard disk driveinstalling 35replacing 38Hard disk indicator 19IIDE drives 33Important notes 3Indicatorpower-on indicator fails to light 25remains blank 26Indicators, on the PC 19Installation opening, 2nd serial port 42Installingaccessible drive 34board 31hard disk carrier 40hard disk drive 38, 39new Software 25ventilation duct 44Insufficient memory 28Interfaces 11Italics 1
Index50 A26361-K520-Z100-4-7619KKensington Lock 24Key combination 21Keyboard 20cleaning 8connecting 12Keyboard port 11Keys 21LLAN-port 11Lead-sealing 24Line in 11Line out 11Lithium battery 43replacing 44Lock 15Locking, PC 15MMain memory 43Main switch 16Manuals, further 28Manufacturer’s notes 4Memory, upgrading 43Menu key 21Message indicator 19Microphone jack 11Monitorconnecting 13transporting 7Monitor port 11Mousecleaning 8connecting 12error 27Mouse port 11NNew Installation, Software 25No screen display 26Noise level 45Not enough memory 28Notational conventions 1Noteboards 3CE certificate 5disposal 4energy saving 4important 3manufacturer 4power cord selection 6safety 3Num Lock key 21
IndexA26361-K520-Z100-4-7619 51Numeric keypad 20OON/OFF switch 16, 21Opening, system unit 29Operation 9Orange, power-on indicator 19Other manuals 28OverviewPC 1preparing for use 9PPacking material 9Parallel port 11connecting devices 12PC cabling 10cannot boot 25cleaning 8closing 30connecting 10connecting to power voltage 14indicators 19locking 15opening 29ports 11setting up 10switching off 16, 18switching on 16, 18switching on for the first time 17transporting 7unlocking 15Ports, external devices 11Power cord selection 6Power management 28Power-on indicator 16, 19dark 25Preparation for use 9Preparing for use, overview 9Printer 11Problems 25Processor 43replacing 43Property protection 23PS/2 mouse port 11QQuiet Boot 26RRated voltage, setting 14Ready-to-operate 16Recycling 4
Index52 A26361-K520-Z100-4-7619Reinstalling, hard disk contents 28Removingaccessible drive 36board 31hard disk carrier 38hard disk drive 39, 40ventilation duct 43Replacingboard 31hard disk drive 38lithium battery 44Restoring, hard disk contents 28Return key 21SSafety 3Screen blank 17, 18, 26Screen blanking 4SCSI drives 33SCSI port 11Security function 24Security functionscasing lock 23Chipcard 23MS-Windows 23Security measures 23Select, power cord 6Serial port 11connecting devices 12Setting, rated voltage 14Settings, BIOS Setup 23Setup, see BIOS SetupShift key 21Soft Power Off 18Software, New Installation 25Start key 21Streamerinstalling 34removing 36Summer time 27Surface 45Switching off, PC 16, 18Switching on, PC 16, 18Symbols, explanation of 1System board, extensions 43System expansion 29System settings, BIOS Setup 23System unit, see PCTTechnical data 45Time, not correct 27Tips 25, 28Transport 7
IndexA26361-K520-Z100-4-7619 53Troublefloppy 27mouse 27screen 26System unit 25Troubleshooting 25UUnlocking, PC 15Unpacking 9Upgrading, memory 43USB, Universal Serial Bus 11VVentilation area 46Ventilation ductinstalling 44removing 43VESA (DPMS) 4Video workstation 10WWarm boot 21Weight 45Winter time 27Write protection, floppy 22

Navigation menu