Fujitsu Technology Solutions SCENIC6651 personal computer User Manual A26361 K520 Z100 4 7619

Fujitsu Technology Solutions GmbH personal computer A26361 K520 Z100 4 7619

Manual Scenic 600 Oct 99 part 6

System expansionsA26361-K520-Z100-4-7619 37Changing the floppy disk driveOpen the system unit (see "Opening the system unit").Remove the hard disk carrier (see "Installing and removing the hard disk drive").12Pull the data and the power supplyconnectors from the floppy disk drive.Remove the screw (1) and take the driveout of the system unit (2).Take the new floppy disk drive out of itspackaging.21Push the drive into the system unit (1), andfix it with the screw (2).Plug the data and the power supplyconnectors into the floppy disk drive.Remove the hard disk carrier (see"Installing and removing the hard diskdrive").Close the system unit (see "Assemblingthe system unit").iIf necessary, you must adapt the entry for the drive in the Setup menu.
System expansions38 A26361-K520-Z100-4-7619Installing and removing the hard disk driveOpen the system unit (see "Opening the system unit").Removing the hard disk carrier2134Lift the hard disk carrier out of the mounting in the direction of the arrow (1) and (2).Lift the hard disk carrier out of the system unit in the direction of the arrow (3) and (4).Pull the data and power supply connectors from the hard disk drive or the hard disk drives.Installing the first hard disk driveTake the new hard disk drive out of its packaging.Make the required settings (e.g. master/slave, stand alone) on the drives.2213Insert the hard disk drive into the plastic bracket (1). The drive must engage in the plasticnipple.Fold the plastic bracket in the direction of the arrow (2) on the hard disk drive.Push the hard disk drive into the drive carrier until the plastic bracket engages (3).
System expansionsA26361-K520-Z100-4-7619 39Installing the second hard disk drive2221Take the new hard disk drive out of itspackaging.Make the required settings (e.g.master/slave, stand alone) on the drives.Slide the hard disk drive into the drivecarrier (1).Fasten the drive with the screws (2).Removing the first hard disk drive12Lightly press on the clip (1).Pull the hard disk drive out of thecarrier (2).112Fold the plastic bracket in the direction ofthe arrow (1).Remove the hard disk drive (2).
System expansions40 A26361-K520-Z100-4-7619Removing the second hard disk drive2111Remove the screw (1).Pull the hard disk drive out of thecarrier (2).Make the required settings on theremaining hard disk drive(e.g. stand alone).Installing the hard disk carrier3421Plug the data and the power supply connectors into the hard disk drive or into the hard diskdrives.Lift the hard disk carrier into the system unit in the direction shown by the arrow (1) and push itforward until it engages (2).Press the hard disk carrier in the direction of the arrow (3) and press it downward (4).Close the system unit (see "Assembling the system unit").iIf necessary, you must adapt the entry for the drive in the Setup menu.

Navigation menu