Fujitsu Client Computing WB0105 Stylistic Q Series Tablet PC User Manual

Fujitsu Limited Stylistic Q Series Tablet PC

Contents

User Manual

SystemOperating ManualFUJITSU Tablet STYLISTIC Q SeriesModel: MQ10A
Contact address in North AmericaFUJITSU AMERICA INC.1250 East Arques Avenue, Sunnyvale,CA 94085-3470, U.S.A.Telephone: 800 831 3183 or 408 746 6000"http://solutions.us.fujitsu.com""http://solutions.us.fujitsu.com/contact"Have a question? Email us at: "AskFujitsu@us.fujitsu.com"Copyright©2018Fujitsu America, Inc.. All rights reservedFPC65-7889-01
FUJITSU Tablet STYLISTIC Q508Operating ManualDeclarations of conformity 7Fujitsu Contact Information 8Notational conventions 9Ports and controls 10Important notes 13First-time setup of your device 18WorkingwiththeTabletPC 22Accessories for your Tablet PC(optional) 38Security functions 55Connecting external devices 60Settings in BIOS Setup Utility 64Troubleshooting and tips 67Technical data 74Manufacturer’s notes 80Appendix 88Index 100
Copyright and Trademark InformationFujitsu America, Incorporated has made every effort to ensure the accuracy and completenessof this document; however, as ongoing development efforts are continually improving thecapabilities of our products, we cannot guarantee the accuracy of the contents of thisdocument. We disclaim liability for errors, omissions, or future changes.Fujitsu, the Fujitsu logo and STYLISTIC are registered trademarks of Fujitsu Limitedor its subsidiaries in the United States and other countries.Intel and Intel Core are trademarks or registered trademarks of Intel Corporation orits subsidiaries in the United States and other countries.Microsoft and Windows are either registered trademarks or trademarks of MicrosoftCorporation in the United States and/or other countries.The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarksor registered trademarks of HDMI Licensing, LLC in the United States and other countries.The ExpressCard word mark and logo are owned by the Personal ComputerMemory Card International Association (PCMCIA) and any use of such marks byFujitsu America, Incorporated is under license.Google is a trademark or registered trademark of Google Incorporated.Bluetooth is a trademark of Bluetooth SIG, Inc., USA.Adobe, Acrobat, and Adobe Reader are either registered trademarks or trademarks of AdobeSystems Incorporated in the United States and/or other countries.All other trademarks specified here are the property of their respective owners.
ContentsContentsDeclarations of conformity ............................................................. 7Fujitsu Contact Information ............................................................ 8Notationalconventions ................................................................ 9Portsandcontrols ..................................................................... 10Importantnotes ........................................................................ 13Safetyinstructions ...................................................................... 13Additional safety notes for devices with wireless components . . ............................. 14Protectingthedisplayscreen ............................................................ 14Energysaving .......................................................................... 14Energy saving under Windows ....................................................... 14TravelingwithyourTabletPC ............................................................ 15Beforeyoutravel ................................................................... 15TransportingtheTabletPC ........................................................... 16CleaningtheTabletPC .................................................................. 17FurtherinformationoncleaningtheTabletPC ......................................... 17First-time setup of yourdevice ......................................................... 18Unpacking and checkingthedevice ...................................................... 18Choose a location ....................................................................... 19Connecting the AC adapter . . . ........................................................... 19Switchingonthe device for the firsttime .................................................. 20Installing BonusApps ................................................................ 21Working withthe TabletPC ............................................................ 22Statusindicators ........................................................................ 23SwitchingtheTabletPCon .............................................................. 24ProgramingtheON/OFFbutton ...................................................... 24SwitchingtheTabletPCoff .............................................................. 25Handwriting recognition .................................................................. 25Touchscreen ............................................................................ 26Selectdisplayorientation(portraitorlandscapeformat) .................................... 26Touchcommands ....................................................................... 27Calibrate the Digitizer for finger-based operation of the device. . ......................... 27Usingthestylus ......................................................................... 28Styluslocation ...................................................................... 29Adjustingthestylus .................................................................. 29Replacingthestylustip .............................................................. 30Calibratingthestylus ................................................................ 30Securingthestylus .................................................................. 31Tabletbuttons .......................................................................... 32Webcam ............................................................................... 33Rechargeablebattery ................................................................... 33Chargingandmaintainingthebattery ................................................. 33Usingthepower-savingfunctions ......................................................... 34Memorycards .......................................................................... 34Supported formats .................................................................. 34Insertingthememorycard ........................................................... 35Removingthememorycard .......................................................... 36Fujitsu 3
ContentsWireless LAN/Bluetooth wireless components ............................................. 36Switching the wireless components on and off ......................................... 36ConfiguringWLANaccess ........................................................... 37FurtherinformationonWLANandBluetooth ........................................... 37EthernetandLAN(dockingcradleonly) ................................................... 37Accessories for your Tablet PC (optional) . ............................................. 38Yourdockingcradle(optional) ............................................................ 39Cradle components . . ................................................................ 39Settingupthecradle ................................................................ 40Connecting the Tablet PC to the cradle . . ............................................. 40Disconnecting the Tablet PC from the cradle . ......................................... 42Keyboard cover (optional) . . . ............................................................ 43Components of the keyboard cover . . ................................................. 43Connecting the Tablet PC to the keyboard cover . . . . . .................................. 44Disconnecting the Tablet PC from the keyboard cover . . . .............................. 45Intermediary VESA Mount Plate (optional) . . . ............................................. 46TPU cover with shoulder strap (optional) . ................................................. 47Components of the TPU cover . . . . . . ................................................. 47InsertingtheTabletPCintheprotectiveTPUcover .................................... 47Connecting the Tablet PC/TPU cover to the keyboard cover . . .......................... 49Connecting the Tablet PC/TPU cover unit to the docking cradle . . . . . . ................... 52Foliocover(optional) .................................................................... 53Adapter cables . . ....................................................................... 54Securityfunctions ..................................................................... 55UsingtheSecurityLock(dockingcradleonly) ............................................. 55ConfiguringpasswordprotectioninBIOSSetupUtility ...................................... 55Protecting BIOS Setup Utility (supervisor password and user password) . . ............... 56Password protection for booting the operating system .................................. 58Passwordprotectionfortheharddisk ..................................................... 59Activatingharddiskprotection ........................................................ 59Deactivatingharddiskprotection ..................................................... 59Connectingexternaldevices ........................................................... 60MicroHDMIport .................................................................... 60HDMIPort(dockingcradleonly) ...................................................... 61VGAmonitorport(dockingcradleonly) ............................................... 61Connecting USB devices ................................................................ 62HowtoremoveUSBdevicescorrectly ................................................ 62Connecting external audio devices . . . . . . ................................................. 63Connecting headphones or other audio output devices . . . .............................. 63Connecting a microphone or other audio input devices . . . .............................. 63Settings in BIOS Setup Utility . . ........................................................ 64StartingtheBIOSSetupUtility ........................................................... 64BIOS Setup Utility operation . ............................................................ 65ExitingBIOSSetupUtility ................................................................ 66Exit Saving Changes - save changes and exit BIOS Setup Utility . . . . ................... 66Exit Discarding Changes - Reject changes and exit BIOS Setup Utility ................... 66LoadSetupDefaults–loaddefaultvalues ............................................. 66Discard Changes - Discard Changes without exiting BIOS Setup Utility . . . ............... 66Save Changes - save changes without exiting the BIOS Setup Utility . ................... 664Fujitsu
ContentsSavechangesandpoweroff ........................................................ 66Troubleshooting and tips .............................................................. 67Executingareset ....................................................................... 68Forcedshutdown .................................................................... 68Execute a complete reset: Reset BIOS Setup to the standard values . . . . . . .............. 68Helpifproblemsoccur ................................................................... 68RecoveringyourFactoryImage .......................................................... 68TheTabletPC’sdateortimeisincorrect .................................................. 68Battery charging indicator does not illuminate . ............................................ 69TheTabletPC’stouchscreenremainsdark ................................................ 69The display on the Tablet PC’s touchscreen is difficult to read. . ............................. 69Theexternalmonitorremainsblank ...................................................... 70Theexternalmonitorisblankortheimageisunstable ..................................... 70The cursor does not correctly follow the stylus movements . . . . ............................. 71Stylusinputnotworking ................................................................. 71TheTabletPCdoesnotstartafterswitchon ............................................... 71TheTabletPCstopsworking ............................................................. 71The printer does not print . . . . . ........................................................... 72The wireless connection to a network does not work . . . .................................... 72Thebatterydischargestooquickly ........................................................ 72Errormessagesonthescreen ........................................................... 73Technicaldata ......................................................................... 74TabletPC .............................................................................. 74Screenresolutionsforintegratedscreenandexternalscreens .............................. 75WLAN specifications .................................................................... 76Rechargeablebattery ................................................................... 77AC adapter (36 W) for the Tablet PC only (without cradle) . . . . . ............................. 77Dockingcradle(optional) ................................................................ 77AC adapter (65 W) for the docking cradle (optional) . . . . . . ............................. 78Keyboardcover(optional) ............................................................... 78Intermediary VESA Mount Plate (optional) . . . . ............................................ 78TPU cover with shoulder strap (optional) . . . . . . ............................................ 78Folio cover (optional) . . .................................................................. 78Adapter cables (optional) . . . . . ........................................................... 79Manufacturer’snotes .................................................................. 80Disposalandrecycling .................................................................. 80Recyclingyourbattery ............................................................... 80DOC(IndustryCANADA)Notices ........................................................ 81ULNotice ........................................................................... 81ENERGYSTARCompliance ............................................................. 82FCCandICRegulatoryInformation ...................................................... 83Regulatory Notes and Statements . ................................................... 83Canada, Industry Canada (IC) ........................................................... 86Canadian Notice . . .................................................................. 86Avis pour le Canada . . . . . . ........................................................... 87Appendix .............................................................................. 88Before Using the Optional Wireless LAN . . . . . . ............................................ 88WirelessLANDevicesCoveredbythisDocument ...................................... 88CharacteristicsoftheWLANDevice .................................................. 88WirelessLANModesUsingthisDevice ............................................... 89Fujitsu 5
ContentsDeactivating/DisconnectingtheWLANDevice ......................................... 91ConfiguringtheWirelessLAN ............................................................ 92Connection to the network . . . ........................................................ 92TroubleshootingtheWLAN ........................................................... 93UsingtheBluetoothDevice .............................................................. 95Image Backup and Recovery Procedures ................................................. 96Windows 10 Procedures . ................................................................ 96Creatingarecoverydrive ................................................................ 96RecoveryoptionsinWindows10 ......................................................... 96Downloading driver updates . ............................................................ 99Index .................................................................................. 1006Fujitsu
Declarations of conformityDeclarations of conformityDECLARATION OF CONFORMITYaccording to FCC Part 15Responsible Party Name:Address:Telephone:Declares that product: Fujitsu America, Inc.1250 E. Arques AvenueSunnyvale, CA 94085(408) 746-6000Base Model Configuration: STYLISTIC Q508 Tablet PCComplies with Part 15 of the FCC Rules.This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.Model ref. of certification: MQ10ADeclarationsof conformityThis device complies with Part 15 of the FCC Rules. Operations are subject to the following twoconditions: (1) This device may not cause harmful interference, (2) this device must accept anyinterference received, including interference that may cause undesired operation.1=Declaration of conformityFujitsu 71
Fujitsu Contact InformationFujitsu Contact InformationService and SupportYou can contact Fujitsu Service and Support in the following ways:• Toll free phone: 1-800-8Fujitsu (1-800-838-5487)• Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.php"Before you place the call, have the following information ready so that the customersupport representative can provide you with the fastest possible solution:• Product name• Product configuration number• Product serial number• Purchase date• Conditions under which the problem occurred• Any error messages that have occurred• Type of device connected, if anyFujitsu Shopping OnlinePlease go to "http://www.shopfujitsu.com/store/ ".Maintaining Latest ConfgurationTo ensure that you always have the most current driver updates related to your system,occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility isavailable from the Fujitsu Support site. FSDM will allow you to view a list of the most currentdrivers, utilities and applications to determine whether you have the latest versions. If you havea Windows operating system, you will need to go to the Support Site to download the FSDMUtility: "http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS".Limited WarrantyYour STYLISTIC Tablet PC is backed by a Fujitsu International Limited Warranty. Check theLimited Warranty Terms and Conditions Booklet that came with your Tablet PC.8Fujitsu
Notational conventionsNotational conventionsPay particular attention to text marked with this symbol. Failure to observethis warning will endanger your life, will damage the device or lead to lossof data. The warranty will be invalidated if the device becomes defectivethrough failure to observe these warnings.Indicates important information which is required to use the device properly.►indicates an activity that must be performedindicates a resultThis style indicates data entered using the keyboard in a program dialogue or atthe command line, e.g. your password (Name123)oracommandusedtostart a program (start.exe)This style indicates information that is displayed on the screen by a program, e.g.:Installation is complete.This style indicates• terms and texts used in a software interface, e.g.: Click on Save.• names of programsorfiles, e.g. Windows or setup.exe."This style" indicates• Cross-references to another section, e.g. "Safety information"•cross-references to an external source, e.g. a web address: For more information, go to "http://solutions.us.fujitsu.com/"•names of CDs, DVDs and titles or designations of other materials, e.g.: "CD/DVD Drivers & Utilities" Key indicates a key on the keyboard, e.g: F10This styleindicates terms and text that are emphasized or highlighted, e.g.: Do notswitch off the deviceFujitsu 9
Ports and controlsPorts and controlsThis chapter presents the individual hardware components of your device. It gives anoverview of the indicators and connections of the device. Please familiarize yourselfwith these items before you start to work with the device.Front1 = Touchscreen2 = Front webcam3 = Ambient light sensor4 = Webcam status LED (blue) 5 = Battery charging indicator 6 = Speakers (internal, not visible)7 = Mechanical mount for keyboardcover / cradle8 = Docking port9 = Power-on indicator10 Fujitsu123477865569
Ports and controlsLeft-hand side2 3 4 5 6 711 = Tether eyelet2 = Combined headphones and microphoneport (audio combo jack)3 = USB 3.0 port (protected by cover)4 = microHDMI port (protected by cover)5 = microSD card slot (protected by cover)6 = Battery charging indicator (orange)7 = DC input connector (DC IN)(protected by cover)Right side1 21 = Stylus garage2 = Tether eyeletFujitsu 11
Ports and controlsRear91082111 = Dual microphones2 = Webcam status LED3 = Rear webcam4 = Webcam flash5 = Shortcut button6 = Volume +/-7 = On/off button8 = Fingerprint sensor9 = Pen tether10 = Pen garage12 Fujitsu3 4567
Important notesImportant notesImportantnotesNotesThis chapter contains essential safety information which must be followed when workingwith your Tablet PC. The other notes provide useful information about your Tablet PC.Safety instructionsSafetyinformationInform ation,Please observe the following safety information.Please pay special attention to the sections in the manual marked with the symbol on the left.When connecting and disconnecting cables, observe the relevant notes in this operating manual.Read the information on the ambient conditions in the "Technical data", Page 74 chapter and the "First-time setup of your device", Page 18 chapter before preparing your tablet PC for use and switching it on for the first time.When cleaning the device, please observe the relevant notes in the section "Cleaning the tablet PC", Page 17.Please refer to the notes in the chapter "Removing and installing components during servicing", Page 77.When handling this device, you will come into contact with lead, a chemical which in California is held to be a possible cause of birth defects and other damage to fertility.Wash your hands after using the device.Do not place objects or apply heavy pressure on your computerDo not apply too much force to the display corners Do not rotate display with excessive force Do not pick up or hold the computer by display onlyDo not shake or bump the displayAvoid excessive vibration and shocksAvoid excess force when tapping or writing on the screenDo not block the air vents Do not leave the computer turned on when enclosed in a briefcase or backpackIn the event you drop your tablet PC or damage the housing in any way, immediately turn off power and disconnect the power plug. Failure to do so could result in a short circuit, smoke, and/or fire. Contact Fujitsu Service and Support to learn how to get the computer repaired.This Tablet PC complies with the relevant safety regulations for data processing equipment. If you have any questions about setting up your tablet PC in the intended environment, please contact your sales outlet or our Hotline/Service Desk.Fujitsu 13
Important notesAdditional safety notes for devices withwireless componentsWirelesscom ponentsWirelessLANBluetooth,SafetynotesIf a wireless component (Wireless LAN, Bluetooth) is integrated in your Tablet PC, you must besure to observe the following safety precautions when using your Tablet PC:• Switch off the wireless components when you are in an aircraft or driving in a car.• Switch off the wireless components when you are in a hospital, an operatingroom or near a medical electronics system. The transmitted radio wavescan impair the operation of medical devices.• Switch off the wireless components, when you let the device get near flammablegases or into hazardous environments (e.g. gas station, paint stores), as thetransmitted radio waves can cause an explosion or a fire.For further information on how to switch the wireless components on and off, referto section "Switching the wireless components on and off", Page 36.Protecting the display screenDo not pour liquids on the system or wash it with a heavily soaked cloth. Do not placeitems on the top of the monitor in order to prevent it from being damaged.During normal use of the device, small particles from the environmentcan become embedded in the stylus tip and scratch the screen. Thewarranty does not cover a scratched screen.Energy savingNotesEnergyPowersavingIf you will not be using your Tablet PC, switch it off. Switch off any connected external devices whenthey are not in use. If you use the energy-saving functions, the Tablet PC uses less power. If you dothis, you will be able to work longer with the Tablet PC before having to recharge the battery.The energy efficiency is increased and environmental pollution is reduced.You save money and help protect the environment.Energy saving under Windows►Make use of the available energy-saving functions as described in chapter"Using the power-saving functions", Page 34.14 FujitsuCAUTION: Do Not Lift or hold the computer by display/LCD panel. It can damage LCD panel due to excessive flex. Always lift/carry computer by holding the keyboard base with both hands
Important notesTraveling with your Tablet PCMobileoperationNotesTrans portati onTabletPCPlease follow the instructions below when traveling with your Tablet PC.Before you travel►Back up the important data of your internal storage.Tab l e tTraveling,tablet►Switch off the wireless component for data security reasons. With data trafficviaawirelessconnection, it is also possible for unauthorized third parties to receive data.Information on activating data encryption is provided in the documentationfor your wireless component.►If you want to use your Tablet PC during a flight, ask the flight attendants to see if it is safe to use it.When traveling in other countries►If you are traveling abroad, check that the AC adapter can be operated with thelocal AC voltage. If this is not the case, obtain the appropriate AC adapter foryour Tablet PC. Do not use any other converter!►Check whether the local AC voltage and the AC cable are compatible. If this is notthe case, buy an AC cable that suits the local conditions.►Enquire with the appropriate government office of the country you will be travelling in as towhether you may operate the wireless component integrated in your Tablet PC there.►Take the necessary travel adapters with you when traveling abroad. Check in the followingtable for which travel adapters you will need, or ask your travel organizer.Power connection Travel destinationUnited States, Canada, Mexico, parts of LatinAmerica, Japan, Korea, Philippines, TaiwanRussia and the Commonwealth of IndependentStates (CIS), much of Europe, parts of LatinAmerica, the Middle East, parts of Africa, HongKong, India, much of south-east AsiaUnited Kingdom, Ireland, Malaya, Singapore,parts of AfricaChina, Australia, New ZealandFujitsu 15
Important notesTransporting the Tablet PCProtect the Tablet PC from severe shocks and extreme temperatures(e.g. direct sunlight in a car).• Do not transport your Tablet PC while it is turned on.• Carry your Tablet PC with you while traveling. Do not check it in as baggage.• Never put your Tablet PC through a metal detector. Have it hand-inspected bysecurity personnel. You can however put your Tablet PC through a properlytuned X-ray machine. To avoid problems, place it close to the entrance ofthe machine and remove it as soon as possible or have it hand-inspected bysecurity personnel. Security officials may require you to turn your Tablet PCon. So make sure you have a charged battery on hand for this.►Switch the Tablet PC off.►Unplug the AC plug of the AC adapter and all external devices from the power outlets.►Disconnect the AC adapter cable and the data cables for all external devices.►To protect against damaging jolts and bumps, use a suitable Tablet PCcarrying case to transport your Tablet PC.16 Fujitsu
Important notesCleaning the Tablet PC• Do not clean any interior parts yourself; leave this job to a service technician.• Only use detergents designed for computers. Normal household cleanersand polishes can damage the labels on the keyboard and the TabletPC, the paintwork or the Tablet PC itself.• Never use ammonia, acidic, or alkaline cleaners or organic chemicalssuch as paint thinner, acetone or kerosene. It may damage surfacefinishes and the coating of the LCD screen.• Use of incorrect cleaners can result in optical impairment of the LCD and / ordamage to the computer. Always refer to the cleaner manufacturer’s guidelines andmaterial safety data sheets for proper handling and use of the products.• Never use compressed air for cleaning your computer.• Be very careful to avoid any liquid entering the ports or slotsas this can damage the unit.Further information on cleaning the Tablet PCThe touchscreen is very sensitive to scratches! Only clean the display surfacewith a very soft, slightly damp cloth.►Switch the Tablet PC off.ReinigungHinweiseTa b le t P CTa s t at u rTouchpadTouchscreen►To prevent the device from being switched on unintentionally, remove the ACplug of the AC adapter from the power outlet.►The surfaces may be cleaned with a dry cloth. If particularly dirty, use a cloth which hasbeen moistened in mild domestic detergent and then carefully wrung out.If the Tablet PC is exposed to water or other liquids, liquid can penetrate theTablet PC and cause a malfunction. Do not continue to use the Tablet PC. Switchit off and contact our hotline / service desk (see enclosed list of service desksor visit our website at:."http://www.fujitsu.com/us/support/").Fujitsu 17
First-time setup of your deviceFirst-time setup of your deviceFirst- timese tupGettingstartedPlease read the chapter "Important notes", Page 13.If your device is equipped with a Windows operating system, the necessaryhardware drivers and supplied software are already pre-installed.Beforeswitchingitonforthefirst time, connect the device to the AC voltage usingthe AC adapter, see "Connecting the AC adapter", Page 19. The AC adapter mustremain connected during the whole of the installation process.A system test is performed when your device is first switched on. Various messagescan appear. The display may remain dark for a short time or may flicker.Please follow the instructions on the screen.NEVER switch off your device during the first-time setup process.The battery must be charged if you want to operate your device using the battery.When used on the move, the built-in battery provides the device with the necessary power. Youcan increase the operating time by using the available energy-saving functions.For instructions on how to connect external devices (e.g. mouse, printer) to your TabletPC, please refer to the operating manual for your device.Unpacking and checking the deviceIf you find that damage has occurred during transport, please notifyyour local sales outlet immediately!►Unpack all the individual parts.PackagingTransport►Check your device for any visible damage which may have occurred during transportation.You may need to reuse the packaging in the future, for example ifyou need to ship your device.18 Fujitsu
First-time setup of your deviceChoosealocationChoosealoc ationSetupACadapterChoose a suitable location for the device before setting it up. In doingso, please follow these instructions:• Never place the device or the AC adapter on a heat-sensitive surface.The surface could be damaged as a result.• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,bed). This can result in damage caused by overheating.• The back of the device heats up during normal operation. Prolonged contactwith skin can become unpleasant or even result in burns.• Place the device on a stable, flat, non-slippery surface. Please note that therubber feet of the device may mark certain types of delicate surfaces.• Keep other objects at least 100 mm / 4 inches away from the deviceand its AC adapter to ensure adequate ventilation.• Do not expose the device to extreme environmental conditions. Protectthe device against dust, humidity and heat.Connecting the AC adapterMakingreadytouseACadapterObserve the safety notes in the Safety section of this User's Guide.The supplied AC cable conforms to the requirements of the country in which you purchased your device. Make sure that the AC cable is approved for use in the country in which you intend to use it.312►Connect the AC cable (1) to the AC adapter.►Plug the AC cable (2) into a power outlet.►Connect the AC adapter cable (3) to theDC jack (DC IN) of the device.Fujitsu 19
First-time setup of your deviceSwitching on the device for the frst timeSwitchingonforthefirst timeTo make it easier to use your device for the first time, the operating systemis pre-installed on the hard disk.2►Press the ON/OFF button (2) for about one second to switch the device on.The power-on indicator (1) lights up whenever the system is switched on.►During the installation process, follow the on-screen instructions.You can find information and help on the Windows operating system functionson the Internet at "http://windows.microsoft.com".20 Fujitsu1
First-time setup of your deviceInstalling Bonus AppsBonusAppsThe Fujitsu Bonus Apps utility can be accessed via the Start menu.►In the Start menu, click on Fujitsu Extras.►Double-click on the Application folder.►Double-click on the shortcut Fujitsu BonusApps.►In the dialog box User Account Control by clicking Yes confirm you wish to enter Fujitsu Bonus Apps.►Select the applications you wish to install by selecting the checkbox adjacent to your selection.or►Click Select All if you would like to install all available applications.Applications that are already installed appear in grey, those that areavailable for installation appear in blue.►To confirm your selection, click Install.Note that in some cases (depending upon which application was selected forinstallation) after installation completes, the system will prompt you to reboot.There are also cases in which if multiple applications are selected to installbut one of them needs a reboot, the system will reboot and continueinstalling the rest of the selected applications.Fujitsu 21
Working with the Tablet PCWorking with the Tablet PCTablet,operationTabletThis chapter describes the basics for operating your Tablet PC. You can find instructionson how to connect external devices (e.g. mouse, flash storage) to the Tablet PC inthe chapter "Connecting external devices", Page 60.Please refer to the notes in the chapter "Important notes", Page 13.22 Fujitsu
Working with the Tablet PCStatus indicatorsStatusindicatorsSymbolsThe status indicators (1, 2, 3, 4) provide information about the statuses of the powersupply and the rechargeable battery and the webcam.1423No. Status indicatorDescription1Battery charging indicatorPlease note: If the AC adapter is connected when thestate of charge of the battery is more than 95 %, chargingwill not be started. When the state of charge of the batteryis less than 95 %, the battery will be charged to 100 % assoon as the AC adapter is connected.• The indicator lights up orange: The rechargeablebattery is charging.• The indicator is not lit up: The battery is not charging(the battery is already fully charged or the AC adapteris not connected).2, 3 Webcam status LED (for front and rear webcam)• The indicator lights up blue: The webcam is switchedon while the Tablet PC is switched on.• The indicator is not lit up: The webcam is switched off.4Power-on indicator• The indicator lights up white: The Tablet PC isswitched on or in sleep mode.• The indicator is not lit up: The Tablet PC is switchedoff.Fujitsu 23
Working with the Tablet PCSwitching the Tablet PC onTablet:SwitchingonPower-onPower-onindicatorSuspend/Resume button►Press the ON/OFF button (2) for about one second to switch the device on. Refer to chapter"Switching on the device for the first time", Page 20 for more information.The power-on indicator (1) lights up whenever the system is switched on.Programing the ON/OFF buttonYou can program the ON/OFF button:Operating system MenuWindows 10 Windows 10 Start - Control Panel - (Search ControlPanel -) Power Options -Choose what the ON/OFFbutton doesIf you have assigned a password, you must enter this when requested todo so, in order to start the operating system. Detailed information can befound in the chapter "Security functions", Page 55.24 Fujitsu21
Working with the Tablet PCSwitching the Tablet PC offBack up your data and close all applications before you switch off yourdevice. Otherwise data might be lost.►Shut down the operating system correctly.►If the Tablet PC does not switch itself off automatically, press the ON/OFFbutton for approx. five seconds.Notebookor►A forced shutdown (reset) button is located on the left side of the system located next to the USB 3.0 port. To achieve the same effect as removing the battery, press the reset button.Handwriting recognitionFor detailed information on handwriting recognition, see the documentation for your operating system.At present, handwriting recognition on Windows supports the following languages:English, German, French, Italian, Japanese, Korean, Chinese (traditional and simplified), Dutch,Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish,Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian.On Windows you can set the required language under Control Panel – Time,Language and Region – Language..Fujitsu 25
Working with the Tablet PCBackground lightingLCD screens are operated with background lighting. The luminosity of the background lighting can decrease over the period of use of the Tablet PC. However, youcan set the brightness of your screen yourself.Ambient light sensorIf your Tablet PC was shipped with the Windows operating system, the screen brightness is regulated by means of the ambient light sensor and depending on the respective light conditions. This results in optimum readability and longer battery life at the same time.If your Tablet PC was shipped with Windows 10, the adaptive brightness setting is activated. To change the ambient light sensor settings, select Control Panel - System and Security - Power Options -Change plan settings - Change advanced power settings - Display - Enable adaptive brightness.Synchronizing the display on the touchscreen and an external monitorIn Windows 10 you can proceed as follows to set the output type:►Look for the keyword "project". Swipe your finger across the screen starting from theright-hand edge.►Select All settings...►Look for the keyword "project".►Select the required function.Select display orientation (portrait orlandscape format)You can choose to use either portrait or landscape for the display, and the screen orientationshould automatically adjust to the orientation of the tablet PC.26 FujitsuYou can change these settings underControl Panel - Hardware and Sound-Windows Mobility Center / Rotate screen.In the settings there are profiles saved for operation with different screen orientations. These profiles have preset standard configurations that can be modified as desiredThese settings do not just affect the screen settings on the Tablet PC, butalso on external monitors that are connected.TouchscreenCAUTION: Do not lift or hold the computer by display/LCD panel. It can damage the LCD panel due to excessive flex. Always lift/carry computer by holding the keyboard base with both hands .
Working with the Tablet PCTouch commandsYou can execute certain commands by using your finger tip on the touchscreen of your device.Alternatively, everything which you can select or activate using your fingertip can also be selected or activated using the stylus.Calibrate the Digitizer for fnger-based operation of the device.You must calibrate your Tablet PC with your fingers before first usage, so thatit recognises your fingertips as accurately as possible.As soon as you notice that the accuracy is deteriorating, you must recalibrate the device.Please note: There are separate calibration programs available for calibrating thestylus (device dependent) and for calibrating finger-based operation. Do not usethe calibration tool for the stylus to calibrate finger-based operation.Operating system MenuWindows 10 To calibrate, run the Hardware and Sound / Tablet PC Settings function in theControl Panel. You need to calibrate both portrait and landscape formats.Fujitsu 27
Working with the Tablet PCUsing the stylusStylus1231 = stylus tip2 = stylus button (right mouse button)3 = eyelet for stylus tetherYou can use the stylus on your Tablet PC as an electronic writing tool, to select menu items and tonavigate through the programs. Programs that support handwriting recognition also allow you towrite directly on the screen with the stylus. You can also use the stylus as a drawing tool.The Tablet PC is supplied with a stylus tether which you can attach to theeyelets on the stylus and on the Tablet PC.Use only the stylus that was provided with your Tablet PC. Do not use any other pointedobject as a substitute, that was not specially designed for your Tablet PC. Replacethe stylus tip if it is worn. The warranty does not cover a scratched screen.While writing, take care that you do not scratch the surface of thedisplay (e.g. with a wristwatch or bracelet).The stylus of the Tablet PC is an electronic instrument that can be damagedif used improperly. Handle the stylus with care.Our recommendations for proper handling of the stylus are as follows:• Do not gesture with the stylus.• Do not use the stylus as a pointer.• Do not use the stylus on surfaces other than the screen of the Tablet PC.• Do not try to turn the grip of the stylus. The grip is used to put thestylus into its slot and to take it out of its slot.• Never store the stylus with its weight on the tip (e.g. with the tip down in a styluscontainer). If the stylus is stored with the tip pointing down, this may have anadverse effect on the stylus mechanism (particularly under high temperatures). Inthis case the stylus tip may react as though it is constantly being pressed down. Toavoid damage, the stylus should be stored in the stylus slot when not in use.The stylus can be influenced by electromagnetic fields (cursor quivers orjumps). There may be a few areas on the screen where the cursor quiversslightly in spite of pressing the stylus down firmly.28 Fujitsu
Working with the Tablet PCThe screen responds to entries made with the tip of the finger or the stylus when thetip of the finger or the stylus directly touches the screen.You can use the stylus to perform almost all functions for which you would otherwise use a mouse.Delete functions are not supported by the stylus.Action Mouse StylusSelecting menuitemsClick with the left mouse button. Tap on the menu entry with the tip ofthe stylus.Starting programs Double-click with the left mousebutton.Tap on the program symbol twice inrapid succession using the stylus tip.Moving an objector windowDrag with the left mouse buttonpressed.Place the stylus tip directly on theobject or window. Keep the stylus tipheld against the screen. Drag thedesired object or window.Opening a contextmenuClick with the right mouse button. Tap on the desired element with thestylus and keep the stylus pressedagainst the screen.Moving the cursor Move the mouse Place the tip of the stylus directly onthe screen.Stylus locationTo prevent the stylus from getting stuck in the stylus garage, always makesure to insert the stylus into the stylus garage in the correct direction (wideside of the stylus parallel with the Tablet display).On delivery, the stylus is located in the stylusgarage:1Adjusting the stylusOperating system MenuWindows 10 Under Control Panel - Hardware and Sound - Pen and Touch you can makevarious settings for the stylus.Fujitsu 29
Working with the Tablet PCCalibrating the stylusYou must calibrate your Tablet PC with the stylus before first use, so that itrecognizes the stylus as accurately as possible.You should also always repeat the calibration if the co-ordination between thestylus and the cursor movement deteriorates.Operating system MenuWindows 10 To calibrate, run the Hardware and Sound / Tablet PC Settings function in theControl Panel. You need to calibrate both portrait and landscape formats.30 Fujitsu
Working with the Tablet PCSecuring the stylusAttach the stylus with a stylus tether to prevent accidentally dropping it or losing it.Your device has one eyelet on the left side and one eyelet on the right side for securing the stylustether (see "Ports and controls", Page 10). The tether eyelet on the right side is shown below.►Fasten the stylus tether to the stylus eyelet and to the eyelet on the Tablet PC.Fujitsu 31
Working with the Tablet PCTablet buttonsYour Tablet PC is fitted with three tablet buttons.Symbol Description Functions1On/Off button Increase volume2Volume down button Decrease the volume3Shortcut button Call the status area by pressing or start a screenshotfunction by a long press (depends on configuration)32 Fujitsu1234Volume up button Increase the volume
Working with the Tablet PCWebcamWebcamYour device has two webcams: one on the front of the device and one on the rear.The webcam has its own status indicator. The indicator lights up when the webcam is active.Depending on the software used, you can use your webcam to take pictures,record video clips or take part in web chats.• The picture quality depends on the lighting conditions and the software being used.• You can only operate the webcam with a particular application (e.g. an Internet telephonyprogram or a video conferencing program which supports a webcam).• When using the webcam the support of the Tablet PC must not wobble.• The webcam automatically adjusts itself to the current light level. For this reason,the touchscreen may flicker while the light level is adjusted.Further information on use of the webcam and additional settings for your webcamcan be found in the help function of the program using the webcam.Rechargeable batteryBatteryBatteryServicelife,batteryRechargeablebatteryBatteryThe built-in battery provides the Tablet PC with the necessary power for use on the move.You can increase the service life of the battery by caring for the battery properly. Theaverage battery service life is around 500 charge/discharge cycles.You can extend the battery service life by taking advantage of the available energy-saving functions.Charging and maintaining the batteryBatteryBatteryThe Tablet PC battery can only be charged when the ambient temperature isbetween 5°C / 41 °F and max. 35°C / 95°F.You can charge the battery by connecting the Tablet PC to the AC adapter(see "Connecting the AC adapter", Page 19).If the battery is running low you will hear a warning alarm. If you do not connect the AC adapterwithin five minutes of hearing the warning alarm, your Tablet PC will switch off automatically.Monitoring the battery state of chargeBatterybatterychargemeterA battery symbol for monitoring the battery capacity is displayed in the system bar /status indicator. The battery symbol shows you the battery charge.Fujitsu 33
Working with the Tablet PCUsing the power-saving functionsEnergyEnergyBatteryThe Tablet PC uses less power when the power-saving features are enabled. You will thenbe able to work longer when using the battery before having to recharge it.The energy efficiency is increased and environmental pollution is reduced.By choosing the best power options, you can make significant savings andat the same time help protect the environment.►Set the power-saving functions in your Control Panel.When the Tablet PC is in an power saving mode, you must remember the following:During power-saving mode, open data is held in main memory orin a swap file on the hard disk.Never switch off the Tablet PC while it is in an energy saving mode. If the built-in batteryis nearly drained, close all open files and do not go into power-saving mode.If you do not intend to use your Tablet PC for a long period of time:►Exit the power-saving mode if necessary via touching the screen or by switching on theTablet PC.►Close all opened programs and completely shut down the Tablet PC.Memory cardsSlotYour Tablet PC is equipped with an integrated storage card reader. Use storagecards to enlarge the storage of your Tablet PC.Follow the manufacturer’s instructions when handling the memory cards.MemorycardSupported formatsIt supports the following formats:• Micro Secure Digital (SDTM Card)• Micro SDHC•MicroSDXC34 Fujitsu
Working with the Tablet PCInserting the memory card12►Open the slot cover (1).►Carefully slide the storage card into the slot (2). The label area must be facing downward.Do not apply any force, otherwise the delicate contact surfaces could be damaged.Memorycard►Close the slot cover.Fujitsu 35
Working with the Tablet PCRemoving the memory cardMemorycardTo avoid any loss of data, always follow the correct procedure for removing thecard (see the documentation for your operating system).►Open the slot cover.321►Press the edge of the memory card so that the memory card jumps slightly out of the slot (1).►Pull the memory card out of the slot (2).►Close the slot cover (3).36 FujitsuSIM cardA SIM Card (Subscriber Identity Module) is a chip card which is inserted in a cellular phone or TabletPC and, together with an integrated 4G module, enables access to a cellular radio network.Follow the instructions supplied by the provider of the SIM card. If you do not feel thethe SIM card engage as you insert it, use a pointed object to insert the SIM card.Please note that the SIM card format must be micro-SIM (3FF). Other SIMcard formats, such as full-size (1FF), mini-SIM (2FF) or nano-SIM (4FF) donot fit in the SIM card slot of your Tablet PC.Please do not insert any other format of SIM card as they may becometwisted, they could even damage the system.
Working with the Tablet PCInserting a SIM card1243►Open the slot cover (1).►Remove the SIM card carrier fromits location (2).►Insert the SIM card (3) as shown onthe SIM card carrier.►Push the SIM card carrier back intoits location (4).►Close the slot cover.36.1 FujitsuWireless LAN/Bluetooth/4G/LTE wireless componentsThe installation of wireless components not approved by Fujitsu willinvalidate the certifications issued for this device.Switching the wireless components on and offThe wireless components are switched on and off using the appropriatefunctions of the operating system.►To switch wireless components on and off individually, select Settings-Network & Internet - Airplane mode.
Working with the Tablet PCConfguring WLAN access• Requirement: A WLAN is available and you have the necessary access data on hand.Information on configuring WLAN access can be found in thedocumentation for your operating system.Further information on WLAN and BluetoothFor further information about WLAN or Bluetooth, please refer to theappendix of this Operating Manual.For WLAN specifications, see chapter "WLAN specifications", Page 76.-Access via UMTS-Access via Wireless-WAN-Access via 4GEthernet and LAN (docking cradle only)EthernetLANThe internal network module of your Tablet PC supports Ethernet LAN. You can use it to establish a connection to a local network (LAN = Local Area Network).21►Connect the network cable to the LANport of the cradle (1).►Connect the network cable to yournetwork connection (2).Your network administrator can help you to configure and use the LAN connections.The network cable is not included in the delivery scope. This type ofcable can be obtained from a specialist dealer.Fujitsu 37
Accessories for your Tablet PC (optional)Accessories for your Tablet PC (optional)The following accessories are available for your Tablet PC:• Docking cradle for charging the Tablet PC with additional ports•Keyboard cover with LAN port•Intermediary VESA Mount Plate •TPU cover with shoulder strap•Folio cover• Adapter cables (USB Type-C to HDMI, USB Type-C to microHDMI, Full USB to LAN)The following sections provide more information on handling the accessories.38 Fujitsu(For Tablet PC models with VESA Shell (screw holes), an optional VESA mounting attachment, the Intermediary VESA Mount Plate, can be attached to the rear.)
Accessories for your Tablet PC (optional)Your docking cradle (optional)As well as fast charging, your docking cradle is a device that also allows you to quickly connectyour Tablet PC to your peripherals such as a monitor, keyboard, mouse, etc. You only needto dock the Tablet PC to be able to work with your peripheral devices.Cradle componentsPortsPortsCradle123451068971 = Dock release button 2 = Docking port3=USBport 3.04=USBport 3.05=USBport 3.06 = VGA monitor port7 = HDMI Port8 = LAN port9 = Security Lock device 10 = DC jack socket (DC IN)With STYLISTIC Q508 the LAN port of the cradle supports Wake-on-LAN (G3 only).With STYLISTIC Q508 two additional external monitors can be connectedeither to the VGA monitor port or to the HDMI Port of the docking cradle. The simultaneous use of two external monitors is supported. (see "Screen resolutions for integrated screen and external screens", Page 75)Fujitsu 39
Accessories for your Tablet PC (optional)Setting up the cradleSelect a suitable location for the cradle before setting it up. In doingso, please follow these instructions:• Placethecradleonaflat, stable, non-slippery surface.• Never place the cradle or the AC adapter on a heat-sensitive surface.• Do not expose the cradle to extreme environmental conditions.Protect the cradle from dust, moisture and heat.Connecting the Tablet PC to the cradleIt is possible to connect the Tablet PC to the cradle while it is running. However, toprevent problems, we recommend that you switch the Tablet PC off first.Disconnect the AC adapter from the Tablet PC before connectingthe Tablet PC to the cradle.When the Tablet PC is connected to the cradle, you must connect the AC adapterto the cradle, to be able to use all the cradle’s functions.Cradle►Remove the AC plug of the AC adapter from the power outlet.►Remove the AC adapter cable from the DC jack (DC IN) of the Tablet PC.40 Fujitsu
Accessories for your Tablet PC (optional)1234►Position the Tablet PC so that it lies against the storage surface of the cradle.►Push the Tablet PC onto the cradle in the direction of the arrow (1) until you feel it engageon the connector and until the slide-out position returns to its original position.Your cradle is supplied with a separate AC adapter (19 V, 4.74 A). Make sure that you only use this AC adapter for the cradle.►Plug the AC adapter cable into the DC jack (DC IN) on the cradle (2).►Connect the AC cable to the AC adapter (3).►Plug the AC cable into the power outlet (4).Fujitsu 41
Accessories for your Tablet PC (optional)Disconnecting the Tablet PC from the cradleIt is possible to separate the Tablet PC from the cradle while it is running.21►Press the slide-out button in the direction of the arrow (1) until it firmlyremains in pressed position (red marking visible).►While holding down the lower part of the cradle, lift the Tablet PC off thecradle in the direction of the arrow (2).42 Fujitsu
Accessories for your Tablet PC (optional)Keyboard cover (optional)The keyboard cover is an optimized device for the convenient input of text. Itonly needs to be docked with the Tablet PC.Components of the keyboard coverKeyboardco verPorts121 = Release button2 = Docking port for the Tablet PCFujitsu 43
Accessories for your Tablet PC (optional)Connecting the Tablet PC to the keyboard coverKeyboardco verTo prevent damage to the system, never fold the Tablet PC on the keyboardcover if the Tablet PC is in the TPU cover.Do not attach the optional keyboard cover to the tablet and carry both using theTPU cover. The keyboard cover and/or tablet could be damaged.12►Press the release button (1) until it remains in the pressed position (red marking becomes visible).►Push the Tablet PC onto the keyboard cover in the direction of the arrow, until you feel itengage on the connector (2) and until the release button returns to its original position.44 Fujitsu
Accessories for your Tablet PC (optional)Disconnecting the Tablet PC from the keyboard cover12►Press the release button (1) until it remains in the pressed position (red marking becomes visible).►Lift the Tablet PC away from the keyboard cover in the direction of the arrow (2).Fujitsu 45
Accessories for your Tablet PC (optional)Intermediary VESA Mount Plate (optional)The VESA mount kit includes the following parts: VESA mountand four M2.5XL5-1 screws.For Tablet PC models with VESA Shell (screw holes), an optional VESA mountingattachment, the Intermediary VESA Mount Plate, can be attached to the rear.Use the Intermediary VESA Mount Plate to secure the Tablet PC to a cart, counter,or stand with the corresponding screw holes, for example.• The Intermediary VESA Mount Plate cannot be used in combinationwith the TPU cover with shoulder strap.• Use the appropriate tool of the correct size when securing the screws.• Keep the screws out of the reach of children.211113333►Remove the covers from the screw holes on the rear of the Tablet PC (1).►Position the Intermediary VESA Mount Plate on the Tablet PC (2). Make sure that the screwholes of the Intermediary VESA Mount Plate and of the Tablet PC lie exactly on top of each other.►Secure the Intermediary VESA Mount Plate with the screws (3).46 Fujitsu
Accessories for your Tablet PC (optional)TPU cover with shoulder strap (optional)Components of the TPU coverThe contents of the TPU cover with shoulder strap accessory option package are:1. TPU Cover2. Shoulder strap3. Rubber stopper in plastic bag for use in combination with keyboard cover4. Fujitsu warranty5. Accessory User GuideInserting the Tablet PC in the protective TPU cover►Lay the TPU cover on the table.12►Place the Tablet PC with the display side face up (1) and with the dock connectionside forward into the corners of the TPU cover.►Allow the Tablet PC to click into place in the TPU cover (2).Fujitsu 47
Accessories for your Tablet PC (optional)a33►If required, secure the shoulder strap (3) at two of the four holders (a) of the TPU cover.►Adjust the length of the shoulder strap.48 Fujitsu
Accessories for your Tablet PC (optional)Connecting the Tablet PC/TPU cover to the keyboard coverThe rubber stopper prevents the unit (with TPU cover installed) from tipping overwhen the unit is docked on the keyboard cover.To install the rubber stopper:►Fold in the connector side of the keyboard cover.►Remove backing paper from the adhesive strip on the rubber stopper.213►Carefully align the rubber stopper (2) and apply rubber stopper into the supportcavity (1) in the direction of the arrow (3).►Apply finger pressure along the stopper to activate adhesive bonding process.►Fold out the connector side of the keyboard cover.Fujitsu 49
Accessories for your Tablet PC (optional)45►Press the release button (4) until it remains in the pressed position (red marking becomes visible).►Push the Tablet PC/TPU cover unit onto the keyboard cover in the direction of the arrow, untilyou feel it engage on the connector (5) and until the release button returns to its original position.To prevent damage to the system, never fold the Tablet PC on the keyboardcover if the Tablet PC is in the TPU cover.Do not attach the optional keyboard to the Tablet PC and do not carry both usingthe TPU cover. The keyboard cover and/or Tablet PC could be damaged.50 Fujitsu
Accessories for your Tablet PC (optional)To disconnect the unit from the keyboard cover, proceed as described in section"Disconnecting the Tablet PC from the keyboard cover ", Page 45.Fujitsu 51
Accessories for your Tablet PC (optional)Connecting the Tablet PC/TPU cover unit to the docking cradle11►Position the Tablet PC/TPU cover unit so that it lies against the storage surface of the cradle.►Carefully push the unit onto the cradle in the direction of the arrow (1) until you feel it engageon the connector and until the slide-out position returns to its original position.To disconnect the unit from the docking cradle, proceed as described in section"Disconnecting the Tablet PC from the cradle ", Page 42.52 Fujitsu
Accessories for your Tablet PC (optional)Folio cover (optional)Do not attach the keyboard cover to your Tablet PC when using the folio cover.• This folio cover contains magnets. Keep away any objects whose operation couldbe affected by magnets, such as heart pacemakers, swipe cards, etc.• Note that the LCD screen may switch on unnoticed when touchedif the device is in the folio cover.• To prevent the device from falling out, make sure that the device is securedin the corresponding retainers of the folio cover.• The folio cover is only designed for the safe storage and secure transportationof the device. Do not use the folio cover for other purposes.• Keep the folio cover away from fire or heaters.• Do not expose the folio cover to direct sunlight, high temperatures or moisture.12►Place the Tablet PC with the display side face up (1) and with the dock connectionside forward into the corners of the folio cover.►Allow the Tablet PC to click into place in the folio cover (2).The following illustration shows you the many ways in which the folio cover can be used:Fujitsu 53
Accessories for your Tablet PC (optional)Adapter cables3 adapter cables are available for the device:* USB Type-C to HDMI* USB Type-C to microHDMFor technical specifications, see chapter "Adapter cables (optional)", Page 79.54 Fujitsu
Security functionsSecurity functionsSecurityfunctionsYour Tablet PC has several security features that you can use to secure your systemand your personal data from unauthorized access.This chapter explains how to use these functions, and what the benefits are.Please remember that in some cases, for example, forgetting your password,you may be locked out of the system and unable to access your data.Therefore, please note the following information:• Back up your data on external data carriers at regular intervals.• Some security functions need you to choose passwords. Make a noteof the passwords and keeptheminasafeplace.If you forget your passwords you will need to contact our Service Desk.Deletion or resetting of passwords are not covered by your warrantyand a charge will be made for assistance.Fujitsu 55Confguring the fngerprint sensorFFiingerngerprpriinn ttss ensensororThe fingerprint sensor can record the image of a fingerprint. With additional fingerprintsoftware, this image can be processed and used instead of a password.11►Install the fingerprint software to be able to use the fingerprint sensor (1).
Using the Security Lock (docking cradle only)ASeSenccti-uu rrthiitteyyLLftpoorccokktectionYour docking cradle (optional) is equipped with a Security Lock device for a Kensington LockCable. You can use the Kensington Lock Cable, a sturdy steel cable, to protect your dockingcradle against theft. The Kensington Lock Cable is available as an accessory.►Fit the Kensington Lock Cable to thefixture on your docking cradle.Confguring password protection in BIOS Setup UtilityBefore using the various options for password protection in the BIOS SetupUtility, please proceed as follows to increase data security:Make a note of the passwords and keep them in a safe place. If you forget yoursupervisor password you will not be able to access your Tablet PC. Passwords arenot covered by your warranty and a charge will be made for assistance.Password protectionYour password can be up to 32 characters long and can contain letters andnumbers. No distinction is made between uppercase and lowercase.Fujitsu 55.1Security functions
Security functionsProtecting BIOS Setup Utility (supervisor passwordand user password)If you have opened these operating instructions on the screen, we recommendthat you print them out. You cannot call up the instructions on the screenwhile you are setting up the password.BIOSSetupUtilityThe supervisor password and the user password both prevent unauthorized use of the BIOSSetup Utility. The supervisor password allows you to access all of the functions of the BIOS SetupUtility, while the user password will only give you access to some of the functions. You canonly set up a user password if a supervisor password has already been assigned.Calling and using the BIOS Setup Utility is described in the chapter"Settings in BIOS Setup Utility", Page 64.Assigning the supervisor and user passwords►Start the BIOS Setup Utility and go to the Security menu.►Select the Set Supervisor Password field and press the Enter key.With Enter new Password: you are asked to enter a password.►Enter the password and press the Enter key.Confirm new Password requires you to confirm the password.►Enter the password again and press the Enter key.Changes have been saved is displayed as a confirmation that the new password has been saved.►To set the user password, select Set User Password and proceed exactly aswhen configuring the supervisor password.If you do not want to change any other settings, you can exit BIOS Setup Utility.►In the Exit menu, select the option Save Changes & Exit.►Select Yes and press the Enter key.PasswordSupervisorpas swordUserpasswordThe Tablet PC is rebooted and the new password is effective. It will now be necessary tofirst enter your supervisor or user password in order to open the BIOS Setup Utility. Pleasenote that the user password only provides access to a few of the BIOS settings.Changing the supervisor password or user passwordYou can only change the supervisor password when you have logged into theBIOS Setup Utility with the supervisor password.PasswordSupervisorpasswordUserpassword►Start the BIOS Setup Utility and go to the Security menu.►When changing the password, proceed exactly as when assigning a password.56 Fujitsu
Security functionsRemoving passwordsTo remove a password (without setting a new password) perform the following steps:PasswordSupervisorpasswordUserpassword►Start the BIOS Setup Utility and go to the Security menu.►Highlight the Set Supervisor Password or Set User Password field and press the Enter key.You will be requested to enter the current password by the Enter Current Password prompt.Enter New Password will appear and you will be requested to enter a new password.►Press the Enter key twice at this request.►In the Exit menu, select the option Save Changes & Exit.►Select Yes and press the Enter key.The Tablet PC is rebooted and the password is removed.Removing the supervisor password simultaneously deactivates the user password.Fujitsu 57
Security functionsPassword protection for booting the operating systemWith the supervisor password you have set in the BIOS Setup Utility (seesection "Assigning the supervisor and user passwords", Page 56), you canalso prevent booting of the operating system.Operating systemActivating system protection►Start the BIOS Setup Utility and go to the Security menu.Operatingsystem►Select the Password on Boot option and press the Enter key.►Select the option you require (Disabled,First Boot or Every Boot) and press the enter keyIf Disabled is selected, a password is not required, and you cannot protectthe system (deactivates system protection).►Select the Save Changes & Exit option under Exit.The Tablet PC reboots. You will be prompted to enter your password (the supervisor password).Deactivating system protection►Start the BIOS Setup Utility and go to the Security menu.Operatingsystem►Select the Password on Boot option and press the Enter key.►Select the Disabled option and press the Enter key.Ifyoudonotwant to change any other settings, you can exit BIOS Setup Utility.►Select the Save Changes & Exit option under Exit.The Tablet PC reboots. The system is no longer password-protected.58 Fujitsu
Security functionsPassword protection for the hard diskPasswordprotect ionThe hard disk password prevents unauthorized access to the hard disk drivesand is checked internally each time the system is booted. The condition for thisis that you have assigned at least the supervisor password.Activating hard disk protection►Call up the BIOS Setup and select the Security menu.If you have not assigned BIOS passwords yet, define the supervisor and the userpassword now, if desired(see"Security functions", Page 55).►Mark the Hard Disk Security field and press the Enter key.►In the area Drive0,markthefield Set Master Password and press the Enter key.Enter new Password then appears and you are asked to enter a password.►Enter the password and press the Enter key.Confirm new Password requires you to confirm the password.►Enter the password again and press the Enter key.With Setup Notice: Changes have been saved you receive confirmation thatthe new password has been saved.►Ifyouwishtoenter a password for a second hard disk (Drive1), in the areaDrive1 mark the field Set Master Password and proceed in exactly the same wayas for the set up of the first hard disk (Drive0).The field Password Entry on Boot is set to Enabled by default. You can exit the BIOSSetup once you have finished changing the settings.►From the Exit menu, choose the option Exit Saving Changes.►Press the Enter key and select Yes.The Tablet PC reboots and your hard disk is now protected with a password. Thepassword prompt is enabled as soon as the Tablet PC has rebooted.Deactivating hard disk protectionTo cancel a password (without setting a new password) proceed as follows:►Call up the BIOS Setup and select the Security menu.►Mark the Hard Disk Security field and press the Enter key.►In the area Drive0, mark the field Set Master Password and press the Enter key.With the prompt Enter current Password you are first asked to enter the old password again.With Enter new Password you are then prompted to enter a new password.►After the request, press the Enter key three times.►From the Exit menu, choose the option Exit Saving Changes.►Press the Enter key and select Yes.The Tablet PC reboots and there is no longer any password protection for this hard disk.►If you wish to remove a password for a second hard disk (Drive1), in the areaDrive1 mark the field Set Master Password and proceed in exactly the same wayas for the removal of the first hard disk (Drive0).Fujitsu 59
Connecting external devicesConnecting external devicesUnder all circumstances, please observe the safety notes provided in the"Important notes", Page 13 chapter before connecting or disconnectingany devices to or from your Tablet PC.Always read the documentation supplied with the device you wish to connect.Never connect or disconnect cables during a thunderstorm.Never pull at a cable when disconnecting it. Always grasp the plug.With some devices, such as USB devices, it is not necessary to switch offthe Tablet PC and the device before connecting/disconnecting. For moreinformation about whether or not devices need to be switched off, please referto the documentation supplied with your external device.Some of the external devices require special drivers (see the operatingsystem and external device documentation).60 Fujitsu
Connecting external devicesHDMI Port (docking cradle only)DisplayPortThe HDMI Port of the docking cradle can be used to connect a monitor, an LCDTV or a plasma TV with a corresponding connection.►Connect the data cable to theexternal device.►Connect the data cable to the HDMIPort of the cradle.VGA monitor port (docking cradle only)An analog monitor is connected to the analog VGA monitor port. Screen output islimited to a maximum of two screens at the same time.MonitorVGA portScr eenconnectionM onitorconnection►Switch off the Tablet PC and theexternal monitor.►Plug the data cable of the externalmonitor into the monitor port.►First switch on the external monitor andthen switch on the Tablet PC.You can also switch back and forth between the external monitor and the LCDscreen of the Tablet PC, see "Touchscreen", Page 26.You can display the same image on the external monitor and on the LCDscreen of the Tablet PC at the same time.Fujitsu 61
Connecting external devicesConnecting USB devicesUSBportsOn the USB ports you can connect external devices that also have a USB port(e.g. a DVD drive, a printer, a scanner or a modem).USB devices are hot-pluggable. This means you can connect and disconnect thecables of USB devices while the operating system is running.USB 1.x has a maximum data transfer rate of 12 Mbps.USB 2.0 has a data transfer rate of up to 480 Mbps.USB 3.0 has a data transfer rate of up to 5 Gbps.USB 3.1 has a data transfer rate of up to 10 Gbps.Additional information can be found in the documentation for the USB devices.►Connect the data cable to theexternal device.►Connect the data cable to a USB porton the Tablet PC or cradle.►USB Type C 3.1 is a charging port withits own USB charging icon (USB +Battery)Device driversUSB devices will be automatically recognized and installed by your operating system.How to remove USB devices correctlyAlways correctly remove the device according to the rules described below,to ensure that none of your data is lost.►Tap the symbol for safe removal of the hardware.►Select the device you wish to shut down and remove.►Tap OK.Wait for the dialog box which tells you that it is now safe to remove the device.62 Fujitsu
Connecting external devicesConnecting external audio devicesYour Tablet PC is equipped with one combined headphones and microphone port, while yourdocking cradle (optional) has separate ports for connecting headphones and microphone.Connecting headphones or other audio output devicesConnectingaudio devicesAudioportsConnectingheadphonesThe combined headphones and microphone port of your Tablet PC or the headphonesport of your docking cradle (optional), allows you to connect output devices such as.,headphones, external speakesr etc., to your Tablet PC.►Connect the audio cable to theexternal device.►Connect the audio cable to the combinedheadphones and microphone port of theTablet PC or to the headphones port ofyour docking cradle (optional).The internal speakers are disabled.If you purchase a cable from a retailer, please note the following information:The combined headphones and microphone port on your TabletPC is a "3.5 mm jack socket".If you want to connect headphones or a speaker you will need a "3.5 mm jack plug".Connecting a microphone or other audio input devicesAudiodevices, connectingAudioportsMicrophone,conn ectingThe combined headphones and microphone port of the Tablet PC or the microphone portof the docking cradle (optional) allows you to connect an external microphone, a MiniDiscplayer, MP3 player, CD player or a tape deck to your Tablet PC.►Connect the audio cable to theexternal device.►Connect the audio cable to the combinedheadphones and microphone port of theTablet PC or to the microphone port ofyour docking cradle (optional).Fujitsu 63
Settings in BIOS Setup UtilitySettings in BIOS Setup UtilityBIOSSetupUtilitySystemsettings,BIOSSetupUtilityConfiguration,BIOSSetupUtilitySetupConfiguring systemConfiguringhardwareTo navigate more easily in the BIOS Setup Utility, you can use an external USB keyboard.The BIOS Setup Utility allows you to set the system functions and the hardwareconfiguration for the Tablet PC.When the Tablet PC is delivered, the default settings are effective. You can changethese settings in the menus of the BIOS Setup Utility. Any changes you make takeeffect as soon as you save and exit the BIOS Setup Utility.The BIOS Setup Utility program contains the following menus:Info Displays information relating to the BIOS, processor and Tablet PCSystem Advanced system settingsAdvanced Configuration of various hardware components, such as mouse, keyboard,processorSecurity Password settings and security functionsBoot Configuration of the start-up sequenceExit Exits the BIOS Setup UtilityStarting the BIOS Setup Utility►Press the Volume Down button before switching on the Tablet PC.BIOSSetupUtility►If a password has been assigned, enter the password and press the Enter key.If you have forgotten the password, contact your system administratoror contact our customer service center.The BIOS Setup Utility starts.64 Fujitsu
Settings in BIOS Setup UtilityBIOS Setup Utility operationBIOSSetupUtilityPress the F1 key to display help about operation of the BIOS Setup Utility. The descriptionof the individual settings is shown in the right-hand window of the BIOS Setup Utility.With the F9 key you can load the default settings of the BIOS Setup Utility.►Use the cursor keys ←or →to select the menu you wish to access to make changes.The menu is displayed on the screen.►Select the option you want to change with the cursor keys ↑or ↓.►Press the "Enter" key.►Press the ESC key to exit the selected menu.►For future reference, make a note of the changes you have made (for example, in this manual).Fujitsu 65
Settings in BIOS Setup UtilityExiting BIOS Setup UtilityBIOSSetupUtilityYou need to select the desired option in the Exit menu and activate it by pressing the Enter key:Exit Saving Changes - save changes and exit BIOS Setup Utility►To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes.The Tablet PC is rebooted and the new settings come into effect.Exit Discarding Changes - Reject changes andexit BIOS Setup Utility►To discard the changes, select Exit Discarding Changes and Yes.The settings which were valid when BIOS Setup Utility was called remain effective.The BIOS Setup Utility ends and the Tablet PC is rebooted.Load Setup Defaults – load default values►To copy the standard entries for all menus of the BIOS Setup Utility,choose Load Setup Defaults and Yes.Discard Changes - Discard Changes withoutexiting BIOS Setup Utility►To discard the changes you have made, select Discard Changes and Yes.The settings in place when BIOS Setup Utility was called remain effective.You can now make additional settings in the BIOS Setup Utility.►IfyouwanttoexittheBIOS Setup Utility with these settings, select Exit Saving Changes and Yes.Save Changes - save changes without exitingthe BIOS Setup Utility►To save the changes, select Save Changes and Yes.The changes are saved. You can now make additional settings in the BIOS Setup Utility.►If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.Save changes and power off►To save the changes and switch off your device, select Save Changes and Power Off and Yes.The changes are saved. Your device is shut down.66 Fujitsu
Troubleshooting and tipsTroubleshooting and tipsTroubleshootingTi psFaultProblemsol vingIf a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows:►Make a note of the steps and the circumstances that led to the fault. Alsomake a note of any error messages displayed.►Switch the Tablet PC off.►Please contact the Hotline/Service Desk.You can contact Fujitsu Service and Support in the following ways:• Toll free phone: 1-800-8Fujitsu (1-800-838-5487)• Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.php"Before you place the call, have the following information ready so that the customersupport representative can provide you with the fastest possible solution:• The model name and serial number of the Tablet PC. The serial numberis located on a sticker on the underside of the Tablet PC.• Notes with the messages that appeared on the screen andinformationonacoustic signals.• All changes you have made to the hardware or software after receiving the Tablet PC.• All changes you have made to the BIOS Setup settings after receiving the Tablet PC.• Your system configuration and all peripheral devices connected to your system.• Your sales contract.Our Tablet PCs have been designed primarily with mobile applications in mind.This means that considerable effort has been made to optimize components andequipment in terms of weight, space and energy requirements. Depending on theparticular configuration you have purchased, it is possible that functionality may beslightly reduced compared to a desktop PC if you are running processor-intensivegaming software, e.g. games with intensive 3D graphics. Updating your hardware withdrivers which have not been approved by Fujitsu may result in performance losses,data losses or malfunction of the equipment. A list of approved drivers and currentBIOS versions can be downloaded from: "http://solutions.us.fujitsu.com"Fujitsu 67
Troubleshooting and tipsExecuting a resetIf the device no longer responds to your inputs, choose one of the following options:Forced shutdown►Press and hold the ON/OFF button for at least 10 seconds.or►Press and hold the button on the left side of the system located next to the USBport. It will have the same effect as removing the battery.The device will be shut down. You can then restart it.Execute a complete reset: Reset BIOS Setupto the standard values►Shut down the device.►If the device does not respond, you may have to force the shutdown, as described above.►Simultaneously press the Volume Down button and the Shortcut button until the OS starts up.The device will restart when you release the buttons.Help if problems occurShould you encounter a problem with your computer that you cannot resolve yourself:►Note the ID number of your device. The ID number is found on the type ratingplate on the back or underside of the casing.►For further clarification of the problem, contact the Fujitsu Service Desk. When you dothis, please have ready the ID number and serial number of your system.Recovering your Factory ImageIn the event you need to recover your system, please refer to the appendix of this Operating Manual.TheTabletPC’sdateortimeisincorrectSummertimeWinterti meIncorrecttimeTime notcorrectWrongdate/timeDatenotcorrectChargingback-up batteryCause TroubleshootingTime and date are incorrect. ►With the BIOS-Setup-Utility, you can set thedate and time in the System menu.Date and time are still set incorrectly afterswitching on the Tablet PC.►Please contact your sales outlet or ourhotline/service desk.68 Fujitsu
Troubleshooting and tipsBattery charging indicator does not illuminateCause TroubleshootingThe battery is discharged. ►Connect the Tablet PC to a power outletusing the AC adapter.Note: The battery will only be charged againwhen the battery capacity is less than 90%.The Tablet PC’s touchscreen remains darkTou ch s c re e ndarktouc hscreenCause TroubleshootingTouchscreen is switched off. ►Press a key (external keyboard) or tap onthe touchscreen.External monitor or television set connected. ►Check whether the graphics driver settingsare correct or whether an external monitorhas been detected in "Intel Graphics MediaAccelerator Driver for mobile".The display on the Tablet PC’s touchscreenis diffcult to read.Tou ch s c re e nTou c h sc r e enCause TroubleshootingReflected glare ►Move the Tablet PC into a different position.►Increase the brightness of the screen.Fujitsu 69
Troubleshooting and tipsThe external monitor remains blankMonitorCause TroubleshootingMonitor is switched off. ►Switch the external monitor on.Power saving has been activated (monitor isblank).►Press a key (external keyboard) or tap onthe touchscreen.Brightness is set to dark. ►Adjust the brightness of the monitor.Screen output is set to the Tablet PCtouchscreen.►Check whether the graphics driver settingsare correct or whether an external monitorhas been detected in "Intel Graphics MediaAccelerator Driver for mobile".The external monitor’s AC cable or data cable isnot connected properly.►Switch off the Tablet PC and the externalmonitor.or►A forced shutdown (reset) button islocated on the left side of the systemlocated next to the USB port. To achievethe same effect as removing the battery,press the reset button.►Check whether the AC cable is pluggedproperly into the external monitor and intothe power outlet.►Check that the data cable is properlyconnected to the Tablet PC and the externalmonitor (if it is plugged in with a connector).►Switch on the external monitor and theTablet PC.The external monitor is blank or the image is unstableMonitorMonitorCause TroubleshootingThe wrong external monitor has been selectedor the wrong screen resolution has been set forthe application program.►Shut down the application program inWindows. If the error persists after shuttingdown the program, use the key combinationfor switching the screen output in order toswitch to the touchscreen of the Tablet PC.Change the following setting:►Set the screen resolution: Set the screenresolution as described in the documentationforyouroperatingsystem.►Select monitor: Select monitor 1 or 2 asdescribed in the documentation for youroperating system.70 Fujitsu
Troubleshooting and tipsThe cursor does not correctly follow thestylus movementsCause TroubleshootingStylus incorrectly calibrated. ►Calibrate the stylus as described in chapters"Adjusting the stylus", Page 29 and"Calibrating the stylus", Page 30.Stylus input not workingCause TroubleshootingIncorrect driver installed. ►Reinstall the driver for the "dual digitizer".The Tablet PC does not start after switch onTabletPCCause TroubleshootingThe battery is dead. ►Charge the battery.or►Connect the AC adapter to the TabletPC.The AC adapter is not connected properly. ►Check whether the AC adapter is properlyconnected to the Tablet PC.►Switch the Tablet PC on.The Tablet PC stops workingTabletPCEndingCause TroubleshootingThe Tablet PC is in energy saving mode. ►End energy saving mode.An application program has caused themalfunction.►Close the application program or restartthe Tablet PC (by restarting the operatingsystem or switching the device off and backon again).The battery is dead. ►Charge the battery.or►Connect the AC adapter to the TabletPC.Fujitsu 71
Troubleshooting and tipsThe printer does not printPrinterdoesnot printCause TroubleshootingThe printer is not switched on. ►Make sure that the printer is switchedon and ready for operation (refer to thedocumentation supplied with the printer).The printer is not connected correctly. ►Check that the data cable between the TabletPC and the printer is properly connected.The printer driver is faulty or not correctlyinstalled, or it is the wrong printer driver.►Check that the data cable between the TabletPC and the printer is properly connected.►Check whether the correct printer driver isloaded (refer to the printer documentation).The wireless connection to a network does not workThewireless connectionto anetwork doesnotwor kCause TroubleshootingThe wireless component is switched off. ►Switch the wireless component on (see"Switching the wireless components on andoff", Page 36).The wireless component is switched on. Despitethis, the wireless connection to a network doesnot work.►Check whether the wireless connection isenabled by the software.►Further information on using the wirelesscomponent can be found in the help files.The battery discharges too quicklyBatteryCause TroubleshootingThe battery is either too hot or too cold. In thiscase the battery charging indicator flashes►Bring the Tablet PC up/down to a normaloperating temperature again.►If the operating time of the battery life isextremely short, the battery is probably tooold. Replace the battery if necessary.You may have an application running thatconsumes a great deal of power due to frequentaccessing of the hard disk or optical drive.►Use the AC adapter whenever possible.The maximum brightness may have been setfor the screen.►Reduce the brightness of the screen tolower energy consumption: You will find thesetting under Control Panel – Hardware andSounds – Windows Mobility Center.72 Fujitsu
Troubleshooting and tipsError messages on the screenErrormessages onthes creenErrormessage:This section describes the error messages generated by the BIOS Setup. Error messages displayedby the operating system or programmes are described in the relevant documentation.If the error message appears repeatedly, despite troubleshooting measures, pleasecontact the place of purchase or our customer service center.Error message/cause ResolutionKeyboard error If you are using an external keyboard:►Check the connection and reboot the TabletPC.Bootable device was not found ►Check in the BIOS Setup whether your harddisk has been set correctly.►Make sure that the operating system isinstalled on the corresponding drive.Press <F1> to resume, <F2> to SETUPThis error message appears if an error occursduring the self-test before starting the operatingsystem.►To continue, press F1 / Windows button.or►To enter the BIOS-Setup-Utility,pressF2 / Decrease volume button.Real time clock error ►Check date and time settings.Fujitsu 73
Technical dataTechnical dataTablet PC -- Q508 (Model: MQ10A)GeneralProcessor Intel® CherryTrail-T™ SoC, Quad Core, IntelAtom® x5-Z8550 Processor (1.44 GHz, 2MCache, up to 2.40 GHz)Main memory (SO DIMM) 4GB DiMM onboardElectrical dataSafety regulations complied with IEC60950-1Protection class IIIMaximum power consumption (when the TabletPC is switched on, connected to the keyboardcover and the battery is charged):36 WTouchscreenSize 10.1" WUXGA Wide View TFT, Anti-GlareDisplay with LED backlitScreen resolution 1920 x 1200 pixels/16 million colorsBrightness control Software control, 101 levelsTechnology Wide-View High-Bright Display with LEDbackground lightingDigitizer and glass panel Dual Digitizer (stylus and touch)Cameras • Front-facing Webcam: 2MP resolution withstatus LED indicator• Rear-facing Webcam: 8MP resolution withauto-focus and status LED indicatorGraphics cardChip Intel® HD graphicsMaximum resolution of external display: 1920 x 1080 (1080p)DimensionsWidth x Depth x Height 10.4”(w)x6.7”(d)x0.6”(h)264.16mm (w) x 107.18mm (d) x 15.24mm (h)Weight depending on configuration Tablet weight: approximately 1.5 lbs.Keyboard Cover weight: 1.5 lbs.Input devicesTablet buttons 3 keysStylus Stylus with a pressure buttonSlotsStorage card slot 1 x microSD cardPortsCombined headphones and microphone port 3.5mmstereominijack74 Fujitsu
Technical dataDocking port 1 xUSB (Universal Serial Bus) 1 x USB 3.0, 1 x USB 2.0HDMI port 1 x micro HDMIAmbient conditionsEnvironment class DIN IEC 721 7K1Mechanism class DIN IEC 721 7M2Operating temperature 5 °C .... 35 °C / 41 °F .... 95 °FTransport temperature (2K2) –15°C....60°C/5°F.... 140 °FScreen resolutions for integrated screenand external screensFujitsu 75Max. number of screens Number of external screens Integrated screen System Interface Ports on the cradle USB Type-C HDMI VGA Only tablet PC 2 1 1920 x 1200 1920 x 1080p 60Hz - - With docking cradle 2 1 1920 x 1200 - 1920 x 1080p 60Hz - 2 1 1920 x 1200 - - 1920 x 1080 @60Hz
Technical dataWLAN specifcationsType of network Intel® Dual Band Wireless-AC 7265 2x2ac/a/b/g/b/n with integrated Bluetooth 4.1, Wi-Fibased*2.4 GHz min. 2412, max. 2472 5.8 GHz min. 5180, max. 5825Transfer rate (Automatic switching) IEEE802.11 a and g: 54Mbps max. data rate; IEEE802.11n: 300 Mbps max. data rate, IEEE802.11ac: 867 Mbps max. data rateTypical operating distances**Number of channels •802.11a: 8 independent channels• 802.11b/g: 11 channels, 3 non-overlappingchannels• 802.11n: Channel bonding takes two ofthe non-overlapping 20MHz channels andcombines it into one 40MHz channel. It isactually 12 non-overlapping channels withchannel bonding and 24 without. Also it is 1non-overlapping channel in 2.4GHz whenchannel bonding is used.•802.11ac: 5 independent channelsSecurity Encryption types: compatible with WEP, TKIP,AES***, WPA 1.0 and WPA 2.0Encryption key, lengths supported: 64 bits and128 bitsMaximum recommended number of computers to be connected over wireless LAN (during ad hoc connection)10 units or less *****“Wi-Fi based” indicates that the interconnectivity test of the organization which guarantees the interconnectivity of wirelessLANs (Wi-Fi Alliance) was passed.** The operating distances given above increase or decrease depending on factors such as the number of walls, reflecting material or interference by external RF sources.*** Network key encryption (WEP) occurs with the number of bits given above, after deduction of the fixed length of 24 bits the user may however also set 40 or 104 bits.**** Depending on the particular practical application, the number of computers which can be networked is reduced if necessary.76 FujitsuActive frequency • 802.11n: 2.4 GHz or 5 GHz• 802.11b/g: 2400~2473 MHz• 802.11a: 4900~5850 MHz• 802.11ac: 2.4 GHz / 5 GHz• 802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft.(91 m) @ 6 Mbps• 802.11ac: 40 ft. (12 m) @ 54 Mbps; 300 ft.(91 m) @ 6 Mbps• 802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft.(91 m) @ 1 Mbps• 802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft.(91 m) @ 1 Mbps• 802.11n: Estimated double the operatingdistance of 802.11g and 802.11a in theirrespective frequencies
Technical dataRechargeable batteryFor information on the batteries used in your device, please see"http://solutions.us.fujitsu.com/www/content/support/".3-cell lithium polymer battery 9030 mAhRated voltage 3.75 VRated capacity 34 WhAC adapter (36 W) for the Tablet PC only(without cradle)TechnicaldataRated voltage 12 VMax. rated current 3 AAn additional AC adapter or AC cable can be ordered at any time.Docking cradle (optional)Electrical dataSafety regulations complied with IEC60950-1Protection class IIIPortsHeadphones port 3.5 mm stereo mini jackMicrophone port 3.5 mm stereominijackDocking port 40-pinHDMI Port 1 xVGA monitor port 1xUSB (Universal Serial Bus) 3 x USB 3.0LAN port 1 xSecurity Lock device 1xAmbient conditionsEnvironment class DIN IEC 721 7K1Mechanism class DIN IEC 721 7M2Operating temperature 5°C .... 35 °C / 41 °F .... 95 °FTemperature in transit –15 °C .... 60 °C / 5 °F .... 140 °FFujitsu 77
Technical dataAC adapter (90 W) for the docking cradle (optional)TechnicaldataRated voltage 19 VMax. rated current 4.74 AAn additional AC adapter or power cable can be ordered at any time.Keyboard cover (optional)Electrical dataSafety regulations complied with IEC60950-1Protection class IIIPortsDocking port 40-pinTouchpadYesAmbient conditionsEnvironment class DIN IEC 721 7K1Mechanism class DIN IEC 721 7M2Operating temperature 5 °C .... 35 °C / 41 °F .... 95 °FTemperature in transit –15 °C .... 60 °C / 5 °F .... 140 °FIntermediary VESA Mount Plate (optional)DimensionsWidth x Depth x Height 3.54 in x 3.58-2.95 in. x 0.24 in90mm x 91mm-75mm x 60mmTPU cover with shoulder strap (optional)DimensionsWidth x Depth x Height 10.63 in. x 6.02 in. x. 0.75 in270 mm x 153 mm x 19 mmFolio cover (optional)DimensionsWidth x Depth x Height 18.11 in. x 10.75 in. x 0.63 in460 mm x 273 mm x 16 mm78 FujitsuLAN portYes
Technical dataAdapter cables (optional)USB to HDMI: USB Type-C to HDMIUSB Type-C to microHDMIFull USB to LAN: LAN Conversion Cable Kit: 1x Full USB to LAN(GbE, limited performance)Fujitsu 79
Manufacturer’s notesManufacturer’s notesDisposal and recyclingNotesYou can find information on this subject on your Tablet PC or on our website("http://solutions.us.fujitsu.com/www/content/products/trade-in_program/").Recycling your batteryOver time, the batteries that run your mobile computer will begin to hold a charge for ashorter amount of time; this is a natural occurrence for all batteries. When this occurs,you may want to replace the battery with a fresh one*. If you replace it, it is importantthat you dispose of the old battery properly because batteries contain materials thatcould cause environmental damage if disposed of improperly.Fujitsu is very concerned with environmental protection, and has enlisted the services of theRechargeable Battery Recycling Corporation (RBRC)**, a nonprofit public service organizationdedicated to protecting our environment by recycling old batteries at no cost to you.RBRC has drop-off points at tens of thousands of locations throughout the United States andCanada. To find the location nearest you, go to "www.RBRC.org" or call 1-800-822-8837.If there are no convenient RBRC locations near you, you can also go to the EIA ConsumerEducation Initiative website "http://EIAE.org/ " and search for a convenient disposal location.Remember – protecting the environment is a cooperative effort, and we mustmake every effort to protect it for current and future generations.* To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping siteat "www.shopfujitsu.com" in the US or "www.fujitsu.ca/products/notebooks" in Canada.** RBRC is an independent third party to which Fujitsu provides funding forbattery recycling; RBRC is in no way affiliated with Fujitsu.80 Fujitsu
Manufacturer’s notesDOC (Industry CANADA) NoticesDOC(INDUSTRYCANADA)NOTICESRadios and TelevisionThis Class B digital apparatus meets all requirements of Canadian Interference-Causing EquipmentRegulations.CET appareil numérique de la class B respecte toutes les exigence du Réglementsur le matérial brouilleur du Canada.UL NoticeIMPORTANT SAFETY INSTRUCTIONSThis unit requires an AC adapter to operate. Only use UL Listed I.T.E. adapters with an output ratingof 12 VDC, with a minimum current of 3.0A (36W). The correct output rating is indicated on theAC adapter label. Refer to the illustration below for the correct AC adapter output polarity:CAUTION:Hazardous optical radiation may be emitted from the camera flash. Do notoperate the flash within 11 in. (284mm) of a person.When using your STYLISTIC tablet equipment, basic safety precautions should always be followedto reduce the risk of fire, electric shock and injury to persons, including the following:• Do not use this product near water for example, near a bathtub, washbowl, kitchensink or laundry tub, in a wet basement or near a swimming pool.•Useonlythepower cord and batteries indicated in this manual. Do not dispose of batteries in afire. They may explode. Check with local codes for possible special disposal instructions.SAVE THESE INSTRUCTIONSFor Authorized Repair Technicians OnlyCAUTION:For continued protection against risk of fire, replace only with thesame type and rating fuse.Fujitsu 81
Manufacturer’s notesENERGY STAR ComplianceYour Fujitsu system is an ENERGY STAR qualified mobile PC. Bychoosing a computer with the latest energy-saving technology, you’rehelping to preserve our environment for future generations. ENERGYSTAR is a joint program of the U.S. Environmental Protection Agency,U.S. Department of Energy, Natural Resources Canada, and othergovernments around the world helping us save money while protectingthe environment through energy efficient products and practices. Withenergy costs and global warming top-of-mind for consumers, Fujitsu iscommitted to offering solutions that help consumers conserve energyand improve the quality of our environment.Display sleep mode:When the AC adapter is connected, the display turns off after 10 minutes. When the ACadapter is not connected (on battery), the display turns off after 4 minutes.Energy saving benefts:Fujitsu ENERGY STAR qualified mobile PCs use about half as much electricity as standardequipment – saving half in utility costs. But more than that, ENERGY STAR also makes a differencefor the environment. Did you know that the average house can be responsible for twice thegreenhouse gas emissions as the average car? That’s because every time you flip on a lightswitch, run your dishwasher, or turn on your PC, you use energy, which means more greenhousegas emissions from power plants. So the more energy we can save through energy efficiency,the more we help to reduce greenhouse gases and the risks of global warming.To learn more about the important ENERGY STAR program, visit:"www.energystar.gov".To read about how Fujitsu is supporting Sustainable Management along withseveral other environmental activities, visit the Fujitsu Corporate Citizenship page at:"http://www.computers.us.fujitsu.com/www/content/aboutus/environmental/environment.php".82 Fujitsu
FCC and IC Regulatory InformationFCC and IC Regulatory InformationPlease note the following regulatory information related to the wireless LANdevice.Fujitsu 83Regulatory Notes and StatementsWireless LAN, Health and Authorization for useRadio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels ofthese emissions, however, are far much less than the electromagnetic energy emissions from wirelessdevices such as mobile phones. Wireless LAN devices are safe for use by consumers because theyoperate within the guidelines found in radio frequency safety standards and recommendations. Theuse of Wireless LAN devices may be restricted in some situations or environments, such as:• On board an airplane, or• In an explosive environment, or• In situations where the interference risk to other devices or services isperceived or identified as harmful.In cases in which the policy regarding use of Wireless LAN devices in specific environments is not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the equipment.WARNING: The Fujitsu Tablet when used in dock mode in the cradle will communicate via RF. The device radiates radio frequency energy at a level below the United States FCC and Canada’s ISED radio frequency exposure limits. However, the Tablet in docked mode shall not be used in body worn positions. Human contact during normal operation should be minimized and a body to Tablet distance of >20cms shall be maintained. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Details of the authorized configurations can be found on FCC website by entering the FCC ID number that is shown on this device.
FCC and IC Regulatory Information84 FujitsuRegulatory Information/DisclaimersInstallation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution or attachment of connecting cables and equipment other than those specified by the manufacturer. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. The manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guidelines.This device must not be co-located or operated in conjunction with any other antenna or transmitter.Federal Communications Commission and IndustryCanada statement:This device complies with Part 15 of FCC Rules and Industry Canada license exempt RSS standard(s).Operation is subject to the following two conditions: (1) This device may not causeinterference, and, (2) This device must accept any interference, including interferencethat may cause undesired operation of this device.Déclaration d’Industrie CanadaCet appareil est conforme à la RSS concernant les appareils exempt s de licence par Industrie Canada.Son fonctionnementest soumis aux deux condition s suivantes : (1) cet appareil ne doit pas causer d’interférencenuisib le; (2) cet appareil doit accepter toutes les interférences reçues, y compris cellespouvan t causer un mauvais fonctionnement de l’appareil.FCC Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses, and can radiate radio frequency energy. If not installed and used in accordance withthe instructions, it may cause harmful interference to radio communications. However, thereis no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try andcorrect the interference by one or more of the following measures:1. Reorient or relocate the receiving antenna.2. Increase the distance between the equipment and the receiver.3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to.4. Consult the dealer or an experienced radio/TV technician for help.
FCC and IC Regulatory InformationFujitsu 85FCC Radio Frequency Exposure statementThe available scientific evidence does not show that any health problems are associated withusing low power wireless devices. There is no proof, however, that these low power wirelessdevices are absolutely safe. Low power wireless devices emit low levels of radio frequencyenergy (RF) in the microwave range while being used. Whereas high levels of RF can producehealth effects (by heating tissue), exposure to low-level RF that does not produce heatingeffects causes no known adverse health effects. Many studies of low-level RF exposure havenot found any biological effects. Some studies have suggested that some biological effectsmight occur, but such findings have not been confirmed by additional research.The wireless LAN radio device has been tested and found to comply with FCC radiationexposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency(RF) Exposure Guidelines.The exposure standard for wireless devices employs a unit of measurement known as the SpecificAbsorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg, and 1.6W/kg by Industry Canada.This device is compliant with SAR for general population /uncontrolled exposure limits inANSI/IEEE C95.1-1992 and Canada RSS 102, and had been tested in accordance withthe measurement methods and procedures specified in OET Bulletin 65 Supplement C,and Canada RSS 102. This device has been tested, and meets the FCC, IC RF exposureguidelines when tested with the device operating conditions.Déclaration de la FCC/d’Industrie Canada surl’exposition aux radiofréquencesLa norme régissant l’exposition des appareils sans fil aux radiofréquences emploie une unitéde mesure dénommée Taux d’absorption spécifique, ou TAS. La FCC et Industrie Canada ontdéfini la même limite de TAS : 1,6 W/kg. Cet appareil est conforme au TAS pour les limitesd’exposition générales de la population/non contrôlées définies par les règles C95.1-1992 del’ANSI/IEEE et RSS 102 d’Industrie Canada ; il a été testé en conformité avec les méthodeset procédures de mesure spécifiées dans le supplément C du bulletin 65 de l’OET (Officed’ingénierie et de technologie) et la règle RSS 102 d’Industrie Canada. Cet appareil a été testéselon les directives de la FCC et d’IC concernant l’exposition aux radiofréquences et s’est révéléconforme à ces dernières lorsqu’il a été testé en contact direct avec le corps.Export restrictionsThis product or software contains encryption code which may not be exported or transferredfrom the US or Canada without an approved US Department of Commerce export license.This device complies with Part 15 of FCC Rules., as well as ICES 003 B / NMB 003 B.Operation is subject to the following two conditions: (1) this device may not cause harmfulinterference, and (2) this device must accept any interference received, including interferencethat may cause undesirable operation. Modifications not expressly authorized by FujitsuAmerica, Inc. may invalidate the user’s right to operate this equipment.
FCC and IC Regulatory Information86 FujitsuRestrictions concernant l’exportationCe produit ou logiciel contient du code de chiffrement qui ne peut être exporté ou transféré duCanada ou des États-Unis sans un permis d’exportation du département du commerce desÉtats-Unis. Ce matériel est conforme à la Partie 15 des règlements de la FCC, ainsi qu’à lanorme ICES 003 B/NMB 003 B. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d’interférence nuisible; (2) cet appareil doit acceptertoutes les interférences reçues, y compris celles pouvant causer un mauvais fonctionnementde l’appareil. Toute modification n’ayant pas été expressément approuvée par la société FujitsuAmerica Incorporated peut annuler le droit de l’utilisateur de se servir du matériel.Canadian NoticeThe device for the 5150 - 5250 MHz band is only for indoor usage to reduce the potentialfor harmful interference to co-channel mobile satellite systems.The maximum antenna gain of 6 dBi permitted (for devices in the 5250 - 5350 MHz, 5470 - 5725MHz and 5725 - 5825 MHz bands) to comply with the e.i.r.p. limit as stated in A9.2 of RSS210.In addition, users are cautioned to take note that high power radars are allocated as primaryusers (meaning they have priority) of 5250 - 5350 MHz and 5650 - 5850 MHz and theseradars could cause interference and/or damage to LE-LAN devices.Avis pour le CanadaLe matériel destiné à un usage sur la bande 5 150 - 5 250 MHz doit être utiliséuniquement à l’intérieur afin de réduire les risques de brouillage nuisible causé auxsystèmes mobiles par satellite fonctionnant sur un même canal.Un gain d’antenne de 6 dBi est autorisé (pour le matériel utilisant les bandes 5 250 - 5 350MHz, 5 470 - 5 725 MHz et 5 725 - 5 825 MHz), conformément à la limite p.i.r.e. maximalepermise selon l’annexe A9.2 afférent aux périphériques RSS210.En outre, les utilisateurs doivent prendre garde au fait que les radars de grande puissancesont considérés comme des utilisateurs principaux (ce qui signifie qu’ils sont prioritaires) desbandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz et qu’ils pourraient causer des interférenceset/ou des dommages aux appareils de réseau exempts de licence.
FCC and IC Regulatory InformationFujitsu 87AVERTISSEMENT – La tablette Fujitsu communiquera par radiofréquences (RF) lorsqu’elle est utilisée en mode station d’accueil dans le socle. L’appareil émet de l’énergie radiofréquence d’une intensité inférieure aux limites d’exposition humaine aux radiofréquences établies par la FCC aux États-Unis et par ISDE au Canada. Toutefois, en mode station d’accueil, la tablette ne doit pas toucher le corps. Les contacts avec le corps pendant le fonctionnement normal de l’appareil doivent être minimisés et une distance de plus de 20 cm doit être maintenue entre le corps et la tablette. L’utilisation d’autres accessoires peut conduire à un usage non conforme aux limites d’exposition aux radiofréquences de la FCC. Des détails au sujet des configurations autorisées sont fournis sur le site Web de la FCC. Entrez alors le numéro d’identification FCC qui apparaît sur cet appareil.
AppendixAppendixBefore Using the Optional Wireless LANThis manual describes the procedures required to properly set up and configure the optionalintegrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of themanual). Before using the WLAN device, read this manual carefully to ensure its correctoperation. Keep this manual in a safe place for future reference.Wireless LAN Devices Covered by this DocumentThis document is applicable to systems containing the following device:• Intel® Dual Band Wireless-AC 7265 (802.11ac/a/b/g/n WLAN) with Bluetoothv4.1Characteristics of the WLAN Device• The WLAN devices are PCI Express Mini cards attached to the main board of the mobile computer.• The WLAN devices operate in license-free RF bands, eliminating the need to procurean FCC operating license. The WLAN operates in the 2.4GHz Industrial, Scientific,and Medical (ISM) RF band and the lower, middle, and upper bands of the 5GHzUnlicensed National Information Infrastructure (UNII) bands.• The WLAN devices are capable of five operating modes: IEEE802.11a, IEEE802.11b,IEEE802.11g, IEEE802.11n, and IEEE802.11AC.• The WLAN device is Wi-Fi certified and operates (as applicable) at a the maximumdata rate of 450 Mbps in IEEE802.11n mode (300 Mbps in this configuration); 54 Mbpsin IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode.• The WLAN devices support the following encryption methods - WEP,TKIP, CKIP, and AES encryption.• The Wireless LAN devices are compliant with the following standards: WPA,WPA2, CCX1.0, CCX2.0, CCX3.0, and CCX4.0.88 Fujitsu
AppendixWireless LAN Modes Using this DeviceAd Hoc Mode"Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivitybetween multiple computers is established without a central wireless network device, typicallyknown as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peerfashion. That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hocnetworks are an easy and inexpensive method for establishing network connectivity betweenmultiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryptionkey settings are identically configured on all computers in the Ad Hoc network.Fujitsu 89
AppendixAccess Point (Infrastructure) ModeInfrastructure mode refers to a wireless network architecture in which devices communicate withwireless or wired network devices by communicating through an Access Point. In infrastructuremode, wireless devices can communicate with each other or with a wired network. Corporatewireless networks operate in infrastructure mode because they require access to the WLAN inorder to access services, devices, and computers (e.g., file servers, printers, databases).**** = An optional hub for a wired LAN maybe required depending upon the typeof access point used.** = ADSL modem, cable modem, or similar90 Fujitsu
AppendixHow to Handle This DeviceThe WLAN device is an optional device that may come pre-installed in your mobile computer. Undernormal circumstances, it should not be necessary for you to remove or re-install it. The OperatingSystem that your mobile computer comes with has been pre-configured to support the WLAN device.•Integrated Intel Centrino wireless LAN devices support IEEE802.11a, IEEE802.11ac,•IEEE802.11b, IEEE802.11g, and IEEE802.11n.•The WLAN device operates in the 2.4 GHz ISM band and the 5 GHzlower, middle, and upper UNII bands.• Microwave ovens may interfere with the operation of WLAN devices since they operate in the same 2.4 GHz frequency range as IEEE802.11b/g/n devices. Interference by microwaves does not occur with IEEE802.11a radio which operates in the 5 GHz RF band.• Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN devices in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput, intermittent disconnects, and many frame errors. It is HIGHLY recommended that these interfering devices be powered off to ensure proper operation of the WLAN device.Deactivating/Disconnecting the WLAN DeviceDisconnecting the WLAN device may be desired in certain circumstances (to extend batterylife) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). TheWLAN device can be disconnected in Windows using the WLAN icon in the system tray(Note that disconnecting via the icon in the system tray does not turn off the radio; itcontinues to transmit and receive even though it’s not connected.)The wireless components are switched on and off using the appropriatefunctions of the operating system.►To switch wireless components on and off individually, selectSettings Network& Internet - WiFi - On / Off.Fujitsu 91
AppendixConfguring the Wireless LANThe optional WLAN device can be configured to establish wireless network connectivityusing the software that is built into Windows. Support for most industry standardsecurity solutions is contained in this software.Pre-defined parameters will be required for this procedure. Please consult withyour network administrator for these parameters:Connection to the networkAfter you have configured your computer, you can connect to an active networkby performing the following steps:1. Click on the WLAN icon in the system tray.2. Select Connect to a network.3. Select a network from the list that appears, and click the Connect button.92 Fujitsu
AppendixTroubleshooting the WLANCauses and countermeasures for troubles you may encounter while using yourwireless LAN are described in the following table.Problem Possible Cause Possible SolutionIncorrect network name (SSID)or network keyAd hoc connection: verify thatthe network names (SSID’s)and network keys (WEP) ofall computers to be connectedhave been configured correctly.SSID’s and WEP key valuesmust be identical on eachmachine.Access Point (Infrastructure)connection: set the networkname (SSID) and network keyto the same values as those ofthe access point.Set the Network Authenticationvalue identically to that of theAccess Point. Please consultyour network administrator forthis value, if necessary.Unavailable network connectionWeak received signal strengthand/or link qualityAd hoc connection: Retryconnection after shorteningthe distance to the destinationcomputer or removing anyobstacles for better sight.Access Point (Infrastructure)connection: Retry connectionafter shortening the distance tothe access point or removingany obstacles for better sight.Fujitsu 93
AppendixProblem Possible Cause Possible SolutionThe WLAN device wasdeactivated or is disabledCheck if the wireless switchis turned On. Go to Start >Control Panel, and doubleclickon Windows Mobility Center.Ifthe wireless network is off, clickthe Turn wireless on button.The computer to be connectedis turned offCheck if the computer to beconnected is turned ON.Incorrectly configured networksettingsRecheck the configuration ofyour network settings.RF interference from AccessPoints or other wirelessnetworksThe use of identical oroverlapping RF channelscancause interference with theoperation of the WLAN device.Change the channel of yourAccess Point to a channelthat does not overlap with theinterfering device.Wireless network authenticationhas failedRe-check your NetworkAuthentication, Encryption,and Security settings.Incorrectly configuredsecurity settings such asan incorrectly typed WEPkey, a mis-configured LEAPusername, or anincorrectlychosen authentication methodwill cause theLANdevicetoassociate but not authenticateto the wireless network.Unavailable network connection(continued)Incorrect IP addressconfigurationThis only applies to networksusing static IP addresses.Please contact your networkadministrator for the correctsettings.94 Fujitsu
AppendixUsing the Bluetooth DeviceBluetooth is integrated into the Wireless LAN module. The Bluetooth capabilities are BluetoothBasic, EDR and Bluetooth Low Energy (BT v4.0) operational modes.What is Bluetooth?Bluetooth technology is designed as a short-range wireless link between mobile devices, suchas laptop computers, phones, printers, and cameras. Bluetooth technology is used to createPersonal Area Networks (PANs) between devices in short-range of each other.Proceed as follows to change Bluetooth settings:1. In the Start menu search field, search for "Bluetooth".2. Select the Bluetooth settings option (dependent on the operating system).3. In the Bluetooth settings window, make the desired settings.Where to Find Information About BluetoothFor additional information about Bluetooth Technology, visit the BluetoothWeb site at: "www.bluetooth.com".FCC Radiation Exposure StatementThis system complies with the FCC limit values for radio frequency radiation in an uncontrolledenvironment. The Bluetooth antenna is located at the top edge of the LCD screen and is exemptfrom the criteria for minimum distance because of its low power consumption.The transmitter used in this system must not be operated together with other antennas or transmitters.Canadian NoticeTo prevent radio interference to licensed services, this system is designed for use in indoorspaces / in buildings and not directly at window openings, to allow a maximum shielding.WarrantyUsers are not authorized to modify this product. Any modifications invalidate the warranty.This equipment may not be modified, altered, or changed in any way without signedwritten permission from Fujitsu. Unauthorized modification will void the equipmentauthorization from the FCC and Industry Canada and the warranty.Fujitsu 95
AppendixImage Backup and Recovery ProceduresWindows 10 ProceduresIt is very important that you create your Recovery Drive before beginning to use your system.It is also important that you create a backup of the content of the C:\Drivers folder onyour system to writable media or an external drive. System-specifc software driversare also available for download through the Fujitsu support site.Note: Most of the information below comes from the Microsoft® page"http://windows.microsoft.com/en-us/windows-10/windows-10-recovery-options".Please refer to it for more details.Creating a recovery driveA recovery drive can help you troubleshoot and fix problems with your PC, even if itwon’t start. To create one, all you need is a USB flash drive. Windows will inform youofthesizetheUSBflash drive needed to hold the required data.1. From the taskbar, search for Create a recovery drive and then select it. You may beasked to enter an administrator password or confirm your selection.2. When the tool opens, make sure Backup system files to the recovery driveis selected and then select Next.3. Connect a USB drive to your PC, select it, and then select Next - Create. A large number offiles need to be copied to the recovery drive, so this could take some time.4. When it’s done, select Finish.Note:If you chose not to back up the system files when you created your recovery drive onWindows 10, you won’t be able to use it to reinstall Windows.Recovery options in Windows 10If your PC isn’t running as quickly or reliably as it used to, try one of these recoveryoptions. The following table can help you decide which one to use.Problem Try thisYour PC isn’t working well and you recentlyinstalled an app, driver, or update.Restore from a system restore pointYour PC isn’t working well and it’s been a whilesince you installed anything new.Reset your PCYour PC won’t start and you’ve created arecovery drive.Use a recovery drive to reinstall WindowsYour PC won’t start and you haven’t created arecovery drive.Use installation media to reinstall Windows96 Fujitsu
AppendixRestore from a system restore pointThis option takes your PC back to an earlier point in time, called a system restore point. Restorepoints are generated when you install a new app, driver, or Windows update, and when youcreate a restore point manually. Restoring won’t affect your personal files, but it will removeapps, drivers, and updates installed after the restore point was made.1. After updating to RS2, right-click (or press and hold) the Start button andsearch Control Panel.Control Panel.2. Search Control Panel for Recovery.3. Select Recovery - Open System Restore - Next.4. Choose the restore point related to the problematic app, driver, or update,and then select Next - Finish.Note: If you don’t see any restore points, it could be because the system protection isn’t turnedon. To check, go to the Control Panel, search for Recovery, and then select Recovery - ConfigureSystem Restore - Configure and make sure that Turn On System Protection is selected.Reset your PCResetting lets you choose whether to keep your files or remove them, and then reinstalls Windows.1. Select Settings - Update & security - Reset this PC - Get started2. Choose an option:Option What it doesKeep my files This reinstalls Windows 10, but keeps your personal files and anyapps that came with your PC. It removes:• Changes you made to settings• Apps and drivers you installedRemove everything This reinstalls Windows 10 and any apps that came with your PC.It removes:• Personal files• Changes you made to settings• Apps and drivers you installedIf you’re planning to donate, recycle, or sell your PC, use this optionand choose to fully clean the drive. This might take an hour ortwo, but it makes it harder for other people to recover files you’veremoved.Use a recovery drive to reinstall WindowsNote: This process utilizes the USB Recovery Drive that you created in theprevious section "Create a Recovery Drive".1. To reset your PC, select Settings - Update & security - Recovery - Advanced startup - Restart now.If that doesn’t fix the problem, try Troubleshoot - Recover from a drive. This will remove your personalfiles, apps and drivers you installed, and changes you made to settings. If you repartitioned thedrive Windows is installed on, note that this will restore the drive’s default partitions.Fujitsu 97
AppendixUse installation media to reinstall WindowsIf you have installation media, like a Recovery DVD that you purchased fromFujitsu, you can use it to reinstall Windows. You will need to install additionaldrivers and applications after reinstalling Windows.To reinstall Windows, follow the steps below:1. Power on your system. When the Fujitsu logo appears on the screen, press the F12 key.2. Insert the bootable disc in your DVD drive.3. Highlight the CD/DVD option from the Boot Menu and press Enter .4. Follow the on-screen instructions to restore the image.• Select the language.• At the Windows Setup dialog window, enter your OS, language and otherpreferences and click Next to continue.•ClickInstall now to proceed with reinstalling Windows.• At License terms, check on I accept the license terms and click Next.•AtWhich type of installation do you want,clickonCustom: Install Windows only (advanced).• Delete all partitions on the drive and click Next. Installation of Windows will start. This willtake some time so please wait until the installation is finished and the system restarts.5. When the system restarts, perform all set-up steps to arrive at the Desktop.6. Connect to the Internet.7. Use the Backup of the contents of the C:\Drivers folder to install needed drivers andapplications to your system. If it is not available, download the software from theFujitsu Support Site, as described below in the "Auto Installation support for thesoftware downloaded from support website" section below.Auto Installation support for the software downloaded from support website1. Download FSDM (Fujitsu Software Download Manager) from the support site and download allthe drivers applicable to the model and OS using FSDM if they are not downloaded yet.2. When the software packages are downloaded from the web, it is important todownload the Auto Installer Software package and the model/language-specificReadme file if you prefer to auto install the software.3. It is important to have the extracted Auto Installer software package folder andReadme file in the same location as the other software folders. Otherwiseauto-installation of the software will not be supported.4. Inside the Auto Installer software package, launch FjAutoinstall.exe as administrator.5. Click Yes on the User Account Control dialog box. This will take some time toprocess the software packages. A message will be displayed during this timestating Please wait while the content is being processed.6. If the EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue.7. The Fujitsu Software Auto Installer user interface will be launched providing the abilityto auto install the software downloaded from the support site.8. It is recommended that you install all the software in the listed order. You canSelect All, to install the software in the order listed.9. Click the Install button to start the installation.10. After installing all the selected drivers, the Installation Results window is displayed. Click OK.98 Fujitsu
Appendix11. You must restart the system for the settings to take effect. Do you wish to rebootnow? message appears. Select Yes.12. The system will now reboot.Downloading driver updatesTo ensure that you always have the most current driver updates related to your system,you should occasionally access the Fujitsu Software Download Manager (FSDM) utility.The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to viewand download the most current drivers, utilities and applications to determine whetheryou have the latest versions. To download the FSDM Utility, go to the Support Site:"http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS".Fujitsu 99
IndexIndexAAC adapterconnecting 19Set up 19Anti-theft protection 55Audio devices, connecting 63Audio ports 63BBattery 33battery charge 34Caring for and maintaining 33charge level 33Charging 33Discharges too quickly 72see Rechargeable battery 33Service life 33battery charge meter 33BIOS Setup Utility, protecting with password 56calling 64exiting 66operation 65Settings 64Bluetooth, Safety notes 14Bonus Apps 21CCharging back-up battery 68Choose a location 19Configuration, BIOS Setup Utility 64Configuring hardware 64Configuring system 64Connecting audio devices 63Connecting headphones 63Cradle 39Connecting a Tablet PC 40Ddark touchscreen 69Date not correct 68Declarations of conformity 7Display Port 61DOC (INDUSTRY CANADA) NOTICES 81EEndingenergy saving mode 71EnergyEnergy consumption 34Energy saving 14Energy saving functions 34Error message:on the screen 73Error messages on the screen 73Ethernet LAN 37FFaultElimination 67First-time setup 18GGetting started 18HHDMI port 60HinweiseReinigung 17IImportant notes 13Incorrect time 68Information,safety 13KKeyboard coverConnecting a Tablet PC 44Ports 43MMaking ready to use 19Memory cardhandling 34inserting 35removing 36Microphone, connecting 63Mobile operation 15Monitorconnection 61no image 70remains blank 70unstable image 70Monitor connectionsee VGA port 61100 Fujitsu
IndexNNotebookswitching off 25Notes 13disposal / recycling 80Energy saving 14Transport 15OOperating systemactivating system protection 58cancel system protection 58Protecting with password 58PPackaging 18Passwordchanging 56entering 56removing 57Password protection 55hard disk 59Ports 39Keyboard cover 43Power saving 14Power-on Power-on indicator 24Printer does not print 72Problem solving 67RRechargeable batterysee battery 33Reinigung 17SSafety information 13Screen connectionsee VGA port 61Security functions 55Security LockAnti-theft protection 55using 55Service life, battery 33Set upDevice 19Setupsee BIOS Setup Utility 64SlotMemory cards 34Status indicators 23Stylus 28Summer time 68Supervisor passwordchange 56entering 56removing 57Suspend/Resume button 24Switchingonforthefirst time 20SymbolsIndicators 23System settings, BIOS Setup Utility 64TTabletbefore traveling 15operating 22Tablet PCcannot be started 71doesn’t work 71reinigen 17transporting 15Tablet, operation 22Tablet: Switching on 24Tastaturreinigen 17Technical data 78AC adapter 77The wireless connection to a networkdoes not work 72Time not correct 68Tips 67Touchpadreinigen 17Touchscreendifficult to read 69reflected glare 69reinigen 17remains dark 69TransportDamage during transportation 18Transportation 15Traveling, tablet 15Troubleshooting 67UUSB ports 62User passwordchange 56entering 56removing 57VVGA port 61Fujitsu 101
IndexWWebcam 33Winter time 68Wireless componentsSafety notes 14Wireless LANSafety notes 14Wrong date/time 68102 Fujitsu

Navigation menu