Fostar Electronic FC2501PA HD Wireless IP Camera User Manual ok

Shenzhen Fostar Electronic Co., Ltd HD Wireless IP Camera ok

Contents

User Manual

UUsseerrMMaannuuaall˄For Windows & Mac OS˅Indoor HD Wireless IP Camera V1.9 Model: FC2403P Color: White Model: FC2405P Color: White Model: FC2503PZ Color: Black/White Model:FC2401P/FC2406P/FC2407PColor: Black/White Model:FC2402P Color: Black/White Model: FC1403P Color: White Model: FC2501PA/FC2501P Color: White
11TTaabblleeooffCCoonntteennttssTTaabblleeooffCCoonntteennttss ...............................................................................................................................................11 Overview ....................................................................................................................................................... 31.1 Key Features ......................................................................................................................................31.2 Read Before Use ................................................................................................................................41.3 Package Contents ..............................................................................................................................41.4 Physical Description ...........................................................................................................................51.5 SD Card ..............................................................................................................................................81.6 Hardware Installation ..........................................................................................................................82 Access the IP Camera ..................................................................................................................................82.1 Hardware Connection .........................................................................................................................92.2 Access the Camera in LAN ................................................................................................................92.3 Access the Camera in WAN .............................................................................................................13 2.3.1 Static IP Addresses ...................................................................................................................13 2.3.2 Remote Access .........................................................................................................................14 2.4 Using the VLC player ........................................................................................................................16 2.5 IP Camera Connection to the Server ................................................................................................193 Surveillance Software GUI ..........................................................................................................................19 3.1 Login Window ...................................................................................................................................20 3.2 Modify the Username and Password ................................................................................................20 3.3 Setup Wizard ....................................................................................................................................21 3.4 Surveillance Window ........................................................................................................................23 4 Advanced Camera Settings ........................................................................................................................31 4.1 Status ...............................................................................................................................................31 4.1.1 Device Information .................................................................................................................31 4.1.2 Device Status .........................................................................................................................32 4.1.3 Session Status ........................................................................................................................32 4.1.4 Log .........................................................................................................................................32 4.2 Basic Settings ...................................................................................................................................33 4.2.1 Camera Name ........................................................................................................................33 4.2.2 Camera Time ..........................................................................................................................33 4.2.3 User Accounts ........................................................................................................................ 34 4.2.4 Multi-Camera ..........................................................................................................................37 4.3 Network ............................................................................................................................................42 4.3.1 IP Configuration ......................................................................................................................42 4.3.2 Wireless Settings ....................................................................................................................43 4.3.3 DDNS .....................................................................................................................................46 4.3.4 UPnP ......................................................................................................................................50 4.3.5 Port .........................................................................................................................................50 4.3.6 Mail Settings ...........................................................................................................................524.3.7 FTP Settings ...........................................................................................................................54 4.3.8 P2P ........................................................................................................................................56 4.4 Video ................................................................................................................................................56
224.4.1 Video Settings ........................................................................................................................56 4.4.2 On Screen Display .................................................................................................................57 4.4.3 Privacy Zone ..........................................................................................................................58 4.4.4 Snapshot Settings ..................................................................................................................59 4.4.5 IR LED Schedule ....................................................................................................................60 4.5 Alarm ................................................................................................................................................60 4.5.1 Action Detection .....................................................................................................................60 4.5.2 Sound Detection(Only FC2501PA and FC2501P) .................................................................. 64 4.5.3 IO Alarm(Only FC2407P and FC2501PA) .............................................................................. 65 4.6 Record ..............................................................................................................................................67 4.6.1 Storage Location ....................................................................................................................67 4.6.2 Alarm Recording .....................................................................................................................68 4.6.3 Local Alarm Recording ...........................................................................................................68 4.6.4 Scheduled Recording .............................................................................................................68 4.6.5 SD Card Management ............................................................................................................70 4.7 PTZ ...................................................................................................................................................70 4.7.1 Pan/Tilt Speed ........................................................................................................................ 71 4.7.2 Cruise Settings .......................................................................................................................71 4.7.3 Start-Up Options .....................................................................................................................75 4.8 Firewall .............................................................................................................................................75 4.9 System .............................................................................................................................................76 4.9.1 Back-up& Restore ..................................................................................................................76 4.9.2 System Upgrade .....................................................................................................................77 4.9.3 Patch Installation ....................................................................................................................79 4.9.4 Factory Reset .........................................................................................................................79 4.9.5 Reboot ....................................................................................................................................79 5 Playback .....................................................................................................................................................79 6 Appendix ..................................................................................................................................................... 81 6.1 Frequently Asked Questions .............................................................................................................81 6.1.1 Install the add-on of Firefox browser, Google Chrome and IE Chrome. ................................. 82 6.1.2 Uninstall the add-on of Firefox browser, Google Chrome and IE Chrome. ............................. 85 6.1.3 I have forgotten the administrator password ........................................................................... 86 6.1.4 Camera can not record ...........................................................................................................86 6.1.5 Subnet doesn’t match .............................................................................................................87 6.1.6 No Pictures Problems .............................................................................................................87 6.1.7 Can’t access IP camera in internet .........................................................................................88 6.1.8 UPnP always failed .................................................................................................................88 6.1.9 Camera can not connect wireless ..........................................................................................88 6.1.10 Can’t see other cameras listed .............................................................................................88 6.2 Default Parameters ...........................................................................................................................89 6.3 Specifications ...................................................................................................................................89 6.4 CE & FCC .......................................................................................................................................101
331 Overview Indoor HD Wireless IP Camera with P2P is an integrated wireless IP Camera with a color CMOS sensor enabling viewing in High Definition resolution. It combines a high quality digital video camera, with a powerful web server, to bring clear video to your desktop and mobile devices from anywhere on your local network or over the Internet. Thanks to the P2P easy access technology, you don’t need to do complicated Port Forwarding and DDNS settings, you just need to scan the QR code of the camera to connect it on smart phone, or input the UID on CMS software to do remote access. The IP Camera gives users more comprehensive control over a monitored site. The camera supports H.264 video compression technology, dramatically reducing file size and saving network bandwidth. The camera is based on the TCP/IP standard. There is a WEB server inside which could support Internet Explore. Therefore the management and maintenance of your device is simplified by using the network to access the website of your camera. The camera is designed for indoor surveillance applications such as home, retail store and office. Controlling the camera and managing images are simplified by using the provided web interface across the network utilizing wired or wireless connectivity. The IP camera provides Smart Phone APP for Android and iPhone users, then you can view your camera anywhere, anytime on your smart mobile devices. 1.1 Key Features z Standard H.264 video compression algorithm to satisfy the transmission of high definition video in narrow bandwidth network z P2P feature for easy access z Pan 300 degree, tilt 120 degree(except for FC1403P, FC2501PA and FC2501P), Pan 350 degree, tilt 120 degree(Only FC2501PA and FC2501P), z Megapixel HD video z Supports IE/Firefox/Google/Safari browser z Supports WEP,WPA-PSK and WPA2-PSK Encryption z Wireless connection is compliant with IEEE 802.11b/g/n Wi-Fi, up to 150Mbps z IR night vision (Range: 8m) z Supports image snapshot z Supports dual-stream z Supports SD Card storage up to 32GB(except for FC1403P) z Supports IR-Cut auto switch
44z Embedded free DDNS(dynamic domain name service) Service z Supporting the Third Party Domain Name Service z Supports two-way audio(except for FC2407P) z Multi-level users management with password protection z Supports Motion detection alert via email or upload image to FTP z Supports Sound Detection via FTP and Email(Only FC2501PA and FC2501P) z Providing free Android and iPhone APP for viewing live video z Support record schedule z Supports Alarm I/O Interface(Only FC2407P and FC2501PA) z Supports EZlink, Link to WiFi network easily(FC2501PA, FC2501P, FC2503PZ. FC2403P) z Supports PIR(Only FC2501PA and FC2501P) The different features between the models involved Model MaxmiumResolution Pan/Tilt Angle OpticalZoomI/OAlarm PIR SoundDetectionSDCard FC2401P 1280*720 Pan 300°, tilt 120° × × × × FC2402P 1280*720 Pan 300°, tilt 120° × × × × FC1403P 1280*720 × × × × × × FC2403P 1280*720 Pan 300°, tilt 120° × × × × FC2405P 1280*720 Pan 300°, tilt 120° × × × × FC2406P 1280*720 Pan 300°, tilt 120° × × × × FC2407P 1280*720 Pan 300°, tilt 120° ××× FC2503PZ 1280*960 Pan 300°, tilt 120° × × × FC2501PA 1280*960 Pan 350°, tilt 120° ×  FC2501PA 1280*960 Pan 350°, tilt 120° × ×  1.2 Read Before Use Please first verify that all contents received are complete according to the Package Contents listed below. Before the IP Camera is installed, please carefully read and follow the instructions in the Quick Installation Guide to avoid damage due to faulty assembly and installation. This also ensures the product is used properly as intended. 1.3 Package Contents  IP Camera × 1  DC Power Adapter × 1  Wi-Fi Antenna × 1  Mounting bracket × 1  Ethernet Cable × 1  CD×1  Quick Installation Guide × 1
551.4 Physical Description Front Panel Figure 1.1 1.Speaker: Built-in speaker 2.LENS: Fixed focus lens. 3.Infrared LED: Infrared LEDs for night vision 4.Microphone: Built-in microphone 5.Wi-Fi Antenna: Wireless Antenna Rear Panel(FC2401P/FC2503PZ/FC2406P) Figure 1.2 Rear Panel(FC2402P/FC2403P/FC2405P) 9.Antenna 8.Audio Input 7.Audio Output 2.Power 1.LAN6. SD Card Slot 5.WPS4.Power light 3.Network light 1.Speaker 2.LENS3.Infrared LED 4.Microphone
66 Rear Panel(FC2407P) 1.LAN: 10/100 Mbps RJ-45 port for wired connection 2.Power: DC 5V/2A Power supply 3.Network Light: The LED will blink slowly in wired connection, blink two times faster in wireless connection, blink four times faster when WPS 4.Power Light: If the power supply works fine, the light will turn on 5.WPS: Push the WPS button on the camera and wireless router in 1 minutes, the camera will connect the wireless router automatically, in WPS process, the Network Light will blink very fast 6. SD card Slot: Supports up to 32GB SD card for storing the video 7.Audio Output: This jack is used to plug an external speaker 8.Audio Input: This jack is used to plug an external microphone 9.Antenna: Used to connect external wireless antenna 1.LAN2.Power 3.Network light 4.Power light6. SD Card Slot 5.WPS7.Audio Output 8.Audio Input 9.Antenna
77Bottom View Figure 1.3 1. Mounting Port: Port for mounting bracket 2. Reset Button: Push and hold for more than 5 seconds to set the camera to factory default. FC2501PA/FC2501P 1.Mounting Port 2.Reset Button
88Please Note: FC2501PA supports the I/O Alarm IN/OUT interface, but FC2501P does not support. 1.5 SD Card NOTE:The FC1403P doesn’t support the function. This camera supports SD Card and the max size of SD card must be under 32G. When you plug in the SD card during the camera work process, please reboot the camera again, or else the SD Card may be cannot work well. The default storage path of alarm record files is SD card, when the available size of SD card is less than 256M, the old record files will be deleted automatically. 1.6 Hardware Installation Step 1:To screw the stent on wall and fix it with 2 screws. We have provided the screws in packing list. Step2 :According to the monitored area to turn the angle of the stent. Finally, manually rotate the screw to lock the camera. 2 Access the IP Camera This chapter explains how to access the camera through browser.
992.1 Hardware Connection 1. Mount the antenna and make it stand vertically. 2. Connect the camera to the LAN network (Router or Switch) via network cable. 3. Connect the power adapter to the camera. 4. Insert the CD into the CD drive of your computer. 5. Go to the folder “IP Camera Search Tool” and find the folder “For Windows OS”or “For Mac OS”. Copy and paste the IP camera tool file to your computer, or drag it onto your Desktop. Shortcut icon for Windows OS Shortcut icon for Mac OS 2.2 Access the Camera in LAN This camera supports HTTP and HTTPS protocols, you can access the camera by two ways. (1) http:// LAN IP + HTTP Port NO. The default HTTP port no is 88. Double click the IP Camera Tool icon to run, and it should find the camera’s IP address automatically after you plug in the network cable. Figure 2.1 Double click the IP address of the camera; your default browser will open to the camera login page. (2) https:// LAN IP + HTTPS Port NO.
10 10The default Https port no is 443. You can use the url to access the camera: https:// LAN IP + HTTPS port. Go to Settings - Network - Port panel , you can see and change the http and https port no.Figure 2.2 HTTPS(Hypertext Transfer Protocol over Secure Socket Layer) is a safe way to access your camera, the data transferred on the Internet will be encrypted. Since we can not apply license for every LAN or DDNS URL, the webpage may pop up a warning like the following picture, you just need to click 'Continue to this website (not recommended). ' Open Internet Explorer if it is not already opened. Click on Tools, then click Internet Options. Next, click the Security tab, then click the Trusted sites button.
11 11Figure 2.3 For Firefox, you can add the trusted as the following way: Tools ---- Options ---- Advanced --- View Certificates --- Servers Figure 2.4
12 12Click View Certificates, and go to Servers option.Figure 2.5 Go to Add Exception panel. Figure 2.6Enter the camera’s url , here take https://192.168.8.129:443for example . Click this button to add it .
13 132.3 Access the Camera in WAN2.3.1 Static IP AddressesUsers who have static IP addresses do not need to set DDNS service settings for remote access. When you have finished connecting the camera using the LAN IP address and port forwarding, you can access the camera directly from the Internet using the WAN IP address and port number. How to Obtain the WAN IP address from a public websiteTo obtain your WAN IP address, enter the following URL in your browser: http://www.whatismyip.com.The webpage at this address will show you the current WAN IP. Figure 2.3 Access your IP Camera from the Internet You can access the IP Camera from the Internet (remote access). Enter the WAN IP address and port number in your standard browser. For example, you would enter http:// 183.37.28.254:85NOTES:Make sure port forwarding is successful. You can do port forwarding two ways. 1) Login to your router to enable the “UPNP” function. You can then login to the camera as administrator, choose Network, and then choose UPnP to enable UPnP. Make sure that the status of UPnP reads “UPnP Successful” on the Device Status page. 2) Do port (HTTP port and Media port) forwarding manually. If your router has a Virtual Server, it can do port forwarding. Add the camera’s LAN IP and port which you had set earlier to your router’s port forwarding settings. If you plug the camera into a router, it will have a dynamic IP address and you need to set DDNS service settings to view it remotely.
14 142.3.2 Remote AccessIf you want to access your camera by web browser outside of your LAN, you need to configure following configurations. 1. Choose “Settings” on the top of the camera web page, then go to the “Network > IP Configuration” section on the left side of the screen, then uncheck the Obtain IP DHCP. 2. Enable UPnP and DDNS in the camera’s settings page. We recommend you to use the DDNS by factory default.3. You can see the port of your camera here. If you want to set Remote Access for several cameras on the IP Address: Set this in the same subnet as your computer , or keep it as default. Subnet Mask: Keep it as default. Gateway and DNS Server: Set it to the IP address of your router. Select Yes and click Save.Click Enable DDNS and click Save. The content in the Manufactureÿs DDNS column is the domain name of your camera.
15 15same network, you will need to change the HTTPS port for each camera. 4. If the UPnP of the router has been enable, you do not need to perform following steps. Otherwise, you need to select one of the following methods to configure port forwarding on your router. For these steps, we will be using the TP-LINK brand wireless router as an example. zIf there is a UPnP function in your router˖Choose “Forwarding > UPnP”, make sure that the Current UPnP Status is Enabled. zIf there is no UPnP function in your router˖You need to manually add port forwarding, refer to the following steps. You need go to the “Forwarding > Virtual Servers” panel for setup. Click Add New.
16 165. Now you can access your IP camera by https://domain name: HTTPS port via the Internet. 2.4 Using the VLC player This camera supports RTSP streaming, here you can view the camera using VLC player. RTSP URL rtsp:// [user name][:password]@IP: port number/videosreamThe part in the square brackets may be omitted. user name & password: The user name and password to access the camera. This part can be omitted. IP: WAN or LAN IP address. port number: If there is the RSTP port number on the Port page, you must only use RTSP port number. otherwise, you must only use HTTP port number. Videostream: Here support three mode: videoMain, videoSub and audio. When the network speed is bad, here you had better select videoSub. If you select audio, you can only hear the sound but cannot see the video. For example: IP: 192.168.1.11 HTTP Port number: 88 User name: admin Input the port and IP address of your camera and click Save. Here you have finished the Port Forwarding setup.
17 17Password: 123 Here I can enter one of the following URLs in the VLC. 1) rtsp://admin:123@192.168.1.11:88/videoMain 2) rtsp:// @192.168.1.11:88/videoMain 3) rtsp://:123@192.168.1.11:88/videoMain 4) rtsp://admin@192.168.1.11:88/videoMain Open the VLC, and go to MediaÆOpen Network Stream option, then enter the URL into VLC. Figure 2.9
18 18Figure 2.10 Sometimes you may need to enter the user name and password again. Click OK and you can see the real-time preview. Figure 2.11
19 19Figure 2.12 If you cannot play the video in the VLC player, please check the port mapping. You can read Quick Installation Guide about How to configure port forwarding. NOTE:If you modify the camera’s username or password, you had better reboot the camera, or else the new username and password cannot take effect when you enter the authentication in the VLC. 2.5 IP Camera Connection to the Server Device supports ONVIF2.2.1 protocol,You can easily access the NVR with ONVIF or server with ONVIF. 3 Surveillance Software GUI Please refer to the Quick Installation Guide if you install the camera at first time. After finishing quick installation, you can take time to learn the operation of the software.
20 203.1 Login WindowFigure 3.1 Please check the login window above, it was divided to 5 sections from no. 1 to 4. Section1 Enter the User name and password The default administrator username is admin with a blank password, please reset the password at first using and prevent unauthorized users login the camera. Section2 Stream The camera supports two stream modes: Main stream and sub stream. If you want to access the camera form LAN, here you can select Main stream. If you want to access the camera from Internet, here we recommend sub stream. Note: When the network bandwidth is badly you’d better select Sub Stream and the video will be more fluency. Section3 Select the language You can select the language you need via click on the language drop-down list to switch. Section4 Login the camera Click Login button and you will see the surveillance windows.(If login the camera for the first time, the page that modify the username and password will appears.) 3.2 Modify the Username and Password When you log in for the first time, it will come to the operating of modify the username and password automatically. 2341
21 21Figure 3.2 Enter the New Username, New password and Confirm the password. Click Modify button, you will see the login page again. 3.3 Setup Wizard After logging in for the first time, you will be directed to theĀSetup Wizardāautomatically. Here you can set the basic parameters of camera, such as camera name, camera time, wireless settings, IP configuration. Figure 3.2 Camera Name: You could give a name for your IP camera. Figure 3.3
22 22System Time: Select the time zone you need to set the date, time,format, etc. Figure 3.4 Wireless networks: Click Scan, find the SSID of your wireless router, select and enter the password. Figure 3.5 IP: Set the IP address of the camera. You could choose to obtain an IP automatically (DHCP) or set the IP address manually according to your needs.
23 23Figure 3.6 NOTE:It takes about 1 minute to connect the camera to your router. 3.4 Surveillance Window Figure 3.7 Section1 LiveVideo / Settings/Playback buttons : Path to surveillance window. Click this button and back to the surveillance window 924358671
24 24: Path to Administrator Control Panel, Click it, and it will lead to Administrator Control Panel and do advanced settings. : Click this button and back to the Playback panel to view the stored audio files stored in the SD Card. Section2 Multi-Device Window The firmware inside the camera supports up to maximum of 9 cameras being monitoring at the same time. You can add other cameras in multi-device setting. Section3 Mode/ Stream / Mirror/ Flip buttons/Zoom Mode1) 50HZ ---------Indoor surveillance (Region: Europe, China) 2) 60HZ ---------Indoor surveillance (Region: USA, Canada) 3) Outdoor------Outdoor surveillance StreamThe default stream supports multiple modes, For example: HD Mode/720P/30fps/2M meanings: Stream type / Resolution / Maximum frame rate/ Bit rate. (Different models support different specific mode. ) 1) Stream type : It is used to identify the stream type. 2) 720P/ VGA The bigger the resolution, the better of the image quality is. If you are accessing the camera via internet and want to get more fluent video streaming, please select resolution VGA. 3) Maximum frame rate When the video format is 50Hz, the maximum frame rate is 25 fps. When the video format is 60Hz, the maximum frame rate is 30 fps. You should lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you can achieve fluently video. The maximum frame rate for each model is different, please see the “Specifications”. 4) Bit rate Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate is large, that will lead to video can not play well. You can reset the stream type on Settings-> Video-> Video Settings panel.
25 25Figure 3.8 After changing, please re-login the camera and you can see the modification. Zoom Control(Only FC2503PZ) Zoom the camera’s lens. Zoom the camera’ lens. You can adjust the speed of the lens’ zoom at Settings--PTZ--Pan & Tilt Speed--Zoom speed.Figure 3.9 Section4 Pan/Tilt Control(except for FC1403P)
26 261----- Up control button, 2----- Down control button, 3----- Left control button, 4----- Right control button, 5----- Up-Left control button 6----- Up-Right control button 7----- Down-Left control button 8----- Down-Right control button Click this button and go to center Section5 Cruise / Preset settings(except for FC1403P) Cruise Settings The default cruise tracks have two types: Vertical and Horizontal. Vertical: The camera will rotate from up to down. Horizontal: The camera will rotate from left to right. : Start cruise. : Stop cruise. If you want to define or change the cruise trace, please go to Settings PTZ Preset Settings panel. How to do cruise? Firstly: Select one track in the track drop-down list 12345678
27 27Secondly: Click Start cruise button, the camera will cruise following the predefined path. Thirdly: Click stop button and finish cruising. Preset settings IP camera supports 16 preset positions, which is considered enough for DIY home & small business surveillance market The default preset position is Topmost, Bottom most, Left most, right most, you can add other preset positions. Add Click this icon to save the position you need the camera to remember Delete Select one preset position and click this button to delete it. GO Select one preset position in the preset drop-down list and click Go to make the camera move the preset position How to do preset position? Firstly, move the camera and stop at a desired place where you want make preset position. Secondly, click button and enter a descriptive name for the preset position. The preset position cannot contain special characters. Then click OK to save it. If you want to reset the preset position, click Cancel. After that, you can move the camera and stop at another place, and set another preset position. You can do all the 16 preset positions with this method. If you want to see one preset position you have set, only select the preset position name from the preset drop-down list, and click go button, the camera will go to the preset position. Section6 IR LED Lights Select one of these
28 28Click Infra led and there are three modes to adjust the infrared led: Auto, Manual and Schedule. Auto: Select it and the camera will adjust the infra led (on or off) automatically. Manual: Select it and you can turn on or turn off the infrared led manually. Schedule: Select it and the IR led light will be off at the schedule period. If you want to define or change the IR led lights schedule time, please go to Settings--->Video---> IR LED Schedule page.Section7 Image quality settings In this page, you can tune Hue, Brightness, Contrast, Saturation, and Sharpness to get higher quality. Section8 OSD If you have added time and camera name in the video, you can see it in the live window. Go to Settings ---Basic settings---Camera name panel, and you can change another device name. The default device name is anonymous. Go to Settings ---Basic settings---Camera time panel and adjust the device time. Go to Settings ---Video---On Screen Display panel, you can add or no add OSD. Section9 Play/Stop/ Talk/Audio/ Snap/ Record/ Full screen button 1 ----- Play Click it to play the video of the camera 2 ----- Stop Click it to stop the video of the camera 3 ----- Talk Click the button and the icon will become to , then talk to the microphone that connected with PC, people around the camera can here your voice. Click the icon again and stop talking. 4 ----- Audio Click this icon, the icon will become to you can hear the sound around the camera by the earphone or speakers that connected with PC. 5 ----- Snapshot Click it to make snapshot and it pop-up a window which picture you snapshot, right click in the window and save the picture to anywhere you want. 6 ----- Record Click the icon and the camera start recording, you can see a green dot in the live 1 2 3 567 4
29 29window. Click again and stop recording. The default storage path is C:\IPCamRecord. You can change the storage path: Go to Settings- >Record->Storage Location panel. 7 ----- Full Screen Click it to make full-screen, or you can double click the surveillance screen to make full-screen. Double click again and exit full-screen. Onscreen Mouse Control Right click the mouse and you can adjust the screen ration, full screen and Zoom up. Figure 3.10 Keep ration: Select it and the camera will adjust the size of live window based on the the computer monitor automatically. Sometimes there is a black border around the video, please select Keep ration to get a better visual quality . Full Screen: Select it and Click it to make full-screen, press ESC and exit full-screen. Zoom up: First Method: Here is a convenient and fast solution to Zoom up/down screen by Clicking Video Screen and adjusting Mouse pulley, or by press the CTRL key and click the mouse left button. Second Method: Click it and the live view will be digital zoomed up, then click Zoom Down and the live view back to original size.
30 30Figure 3.11 When you select the Full Screen, then click right mouse, there is a Screen PTZ button. Figure 3.12 Click the Screen PTZ button and put the mouse on the screen to indicate the camera move direction you prefer, press the left mouse, the camera will move to the corresponding direction. Loosen the mouse and stop moving. Press Esc button or double click right mouse and cancel the function. NOTE:For Mac OS, the plugin cannot support Onscreen Mouse Control, so you cannot allow to use it.
31 314 Advanced Camera Settings Click the button “Settings”, goes to Administrator Control Panel to make advanced camera settings. 4.1 Status Status contains four columns: Device Information, Device Status, Session Status and Log, it will show you various information about your camera. 4.1.1 Device Information Figure 4.1Camera Model: The camera model no. Camera Name: The Device Name is a unique name that you can give to your device to help you identify it. Click Basic Settings and go to Camera name panel where you can change your camera name. The default device name is anonymous. Camera ID: Display the wired MAC address of your camera. For example Device ID is 000C5D00008, the same MAC ID sticker is found at the bottom of the camera. Camera Time: The system time of the device. Click Basic Settings and go to Camera time panel and adjust the time. Application Firmware Version: Display the application firmware version of your camera. Plug-In Version: Display the plug-in version of your camera System Firmware Version: Display the System Firmware version of your camera.
32 324.1.2 Device Status On this page you can see device status such as Alarm status/ Record Status ,DDNS status ,WIFI status and so on.Figure 4.24.1.3 Session Status Session status will display who and which IP is visiting the camera now. Figure 4.34.1.4 Log The log record shows who and which IP address accessed or logout the camera and when.
33 33Figure 4.4Reboot the camera and clear the log records. 4.2 Basic Settings This section allows you to configure your camera’s Name, Time, Mail, User account and Multi-Device.4.2.1 Camera Name Default alias is anonymous. You can define a name for your camera here such as apple. Click Save to save your changes. The alias name cannot contain special characters. Figure 4.54.2.2 Camera Time This section allows you to configure the settings of the internal system clocks for your camera. Click the page number and go to the corresponding page to see more logs. Fill in one page number, click Go button and go to the corresponding page.
34 34Figure 4.6Time Zone: Select the time zone for your region from the drop-down menu. Sync with NTP server: Network Time Protocol will synchronize your camera with an Internet time server. Choose the one that is closest to your camera. Sync with PC: Select this option to synchronize the date and time of the Network Camera with your computer. Manually: The administrator can enter the date and time manually. Note select the date and time format. use DST: Select the use DST, then select the daylight saving time from the drop-down menu. Click Save button and submit your settings. 4.2.3 User Accounts Here you can create users and set privilege, visitor, operator or administrator. The default user account is admin, with a blank password. You can enter the users accounts of visitor ǃoperator and adminstrator Manually.
35 35Figure 4.7How to change the password of administrator? Firstly, select the account of administrator, then select “Change password”, enter the old password and the new password, lastly click modify to take effect. Figure 4.8How to add account ? Select one blank column, then enter the new user name, password and privilege, last click Add to take effect. You can see the new added account on the Account list.
36 36Figure 4.9Figure 4.10Delete˖Select the account which you want to delete, then click Delete button to take effect. NOTE:The default admin account cannot be deleted, but you can add other administrator users.
37 374.2.4 Multi-Camera If you want to view multi-surveillance screens on one window, you need to login one camera, and set it as the main device, and do Multi-Device Settings, add other cameras to the first one camera. Before you do multi-cams settings, you need to assign different port such as 81, 82, 83, 84, 85, 86, 87, 88 to the cameras if there is 8 cams installed. The firmware within the camera can support a maximum of 9 devices monitoring all at the same time. This page you can both add MJPEG and H.264 series cameras to the first camera and view multi-surveillance screen on one window. Add cameras in LAN In Multi-Device Settings page, you can see all devices searched in LAN. The 1st Device is the default one. You can add more cameras in the list in LAN for monitoring. The camera’s software supports up to 9 IP Cameras online simultaneously. Click The 2nd Device and click the item in the Device List in LAN, the Alias, Host and Http Port will be filled in the boxes below automatically. Enter the correct username and password then click Add. Add more cameras in the same way. Figure 4.11Camera Model: Our Company produces two series cameras: MJPEG and H.264. Here will show you which series the camera belongs to. 1 Click it, camera model, alias, host and HTTP Port will be filled in the following boxes automatically2 Enter the User name and password of the 2nd camera3 Click Add to take effect
38 38Figure 4.12Back to Surveillance Windows, and click Four Windows option, you will see four cameras you added. Figure 4.13
39 39Figure 4.14Add cameras in WAN If you want to view all cameras via the internet(remote computer), you will need to add them using DDNS domain name. Firstly, make sure all of the cameras you added can be accessed through the internet. (Read How to configure DDNS settings)Login to the first camera using a DDNS domain name and port. Figure 4.15Use DDNS domain name and port to login. Make sure each camera you need add could login with DDNS name and port.
40 40Click Multi-Device Settings. Choose The 2nd Device. Fill in the 2nd camera’s name, DDNS domain name, port number. Enter user name and password and then choose Add. (Figure 4.19) Figure 4.161----- The camera model: MJ or H264. 2----- The 2nd camera’s name 3----- Fill in the 2nd camera’s DDNS host not LAN IP NOTE: The MJ series have the same HTTP Port no. and Media Port no. 4---- Enter the 2nd camera’s user name and password 5---- Click Add button and to take effect NOTE: Here the Host must be entered as the second camera’s DDNS domain name, not its LAN IP.
41 41Figure 4.17Return to video window. You will see all of the cameras accessible through the internet. When you are away from home, you can use the first camera’s DDNS domain name and port to view all the cameras via internet. Figure 4.18
42 424.3 Network This section will allow you to configure your camera’s IP, DDNS, Wireless Settings, UPnP and Port. 4.3.1 IP Configuration If you want to set a static IP for the camera, please go to IP Configuration page. Keep the camera in the same subnet of your router or computer. Figure 4.19Changing settings here is the same as using the IP Camera Tool. It is recommended that you use the subnet mask, gateway and DNS server from your locally attached PC. If you don’t know the subnet mask, gateway and DNS server, you can check your computer’s local area connection as follows: Control Panel ÆNetwork Connections ÆLocal Area Connections ÆChoose Support ÆDetails. Figure 4.20Click here
43 43Figure 4.21If you don’t know the DNS server, you can use the same settings as the Default Gateway. 4.3.2 Wireless Settings Step 1: Choose “Settings” on the top of the camera interface, and go to the “Network” panel on the left side of the screen, then click “Wireless Settings.”Click the Scan button and the camera will detect all wireless networks around the area. It should also display your router in the list. Set the same Subnet Mask and gateway of the camera with your PC. There are two DNS servers, you can set any of them. Same with gateway is also
44 44Figure 4.22Step 2: Click the SSID (name of your router) in the list, the corresponding information related to your network, such as the name and the encryption, will be filled into the relevant fields automatically. You will only need to fill in the password of your network. Make sure that the SSID, Encryption and the password you filled in are exactly the same for your router. Figure 4.23Step 3: Please click on the Save button after all settings have been entered and disconnect the network cable. Never shut down the power of the camera until the IP camera is able to connect to the wireless network. Click the Page number to see other wireless networks devices if there are more than 10. 1 Click the SSID of your router and the relevant information will be filled in the fields automatically. 2 Enter the password of your routerClick the Scan button to search for wireless networks.
45 45The LAN IP address will disappear on the window of IP Camera Tool when the camera is configuring a wireless connection. Wait about 1 minute, the camera should obtain a wireless connection, and the LAN IP of the camera will show again on the window of the IP Camera Tool. The IP address may have changed after the camera receives a wireless connection; we recommend setting a static local IP address if this IP address changes by right clicking the camera in IP Camera Tools, setting a static IP, and pushing OK (see Figure4.36). Congratulations! You have set up the wireless connection of the camera successfully. NOTE:If you fail to make a wireless connection, please refer to your seller or contact us directly for assistance. WPS (Wi-Fi Protected Set-up) Step 01) Press and hold the WPS button for two seconds. Step 02) Press the WPS button on your router within 60 seconds. The WPS button is usually on the back or side of your router. On some routers, you may need to log in to the web interface and click on an on-screen button to activate the WPS feature. If you are not sure where the WPS buttons is on your router, please refer to your router’s User Manual. The camera will automatically create a secure wireless connection to your router. If you have plugged in the network cable, please plug it out. The IP Camera Tool will search the camera’s LAN IP. Make sure the PC and the camera share the same subnet. NOTE:The security mode of router cannot be WEP, or else the WPS settings may be failed. WPS Button
46 464.3.3 DDNS Each camera has embedded a unique DDNS domain name when producing, and you can directly use the domain name, you can also use the third party domain name. Ip camera domain name Here take a33471.myipcamera.org for example. Go to option of DDNS on the Settings->Network panel, you can see the domain name. Figure 4.24Now you can use http:// Domain name + HTTP Port to access the camera via internet. Take hostname a33471.myipcamera.org and HTTP Port no. 800 for example, the accessing link of the camera via internet would be http:// a33471.myipcamera.org:8000Restore DDNS to factory: If you have configured Third Party DDNS successfully, but you want to use Manufacturer’s DDNS again , here click this button and start Manufacturer’s DDNS Service. Third Party Domain Name Settings User can also use third part DDNS, such as www.no-ip.com, www. 3322.com Here take www.no-ip.com for example: ķStep 1, Go to the website www.no-ip.com to create a free hostname Firstly: Login on www.no-ip.com and click No-IP Free to register.
47 47Figure 4.25Figure 4.26Click here to register
48 48Please register an account step by step according to instructions on www.no-ip.comAfter registration, please login your email which used to register. You will receive an email from website, please click the link to activate your ACCOUNT as indicated in email. Secondly: Login the link with the registered username and password to create your domain name. Figure 4.27
49 49Figure 4.28Please create the domain name step by step according to instructions on www.no-ip.comStep 2, DO DDNS Service Settings within the CameraPlease set DDNS Settings within the camera by hostname, a user name and password you’ve got from www.no-ip.comTake hostname ycxgwp.no-ip.info, user name ipcamera, password ipcamera2012 for example. Firstly, goes to option of DDNS Settings on the administrator panel. Secondly, select No-Ip as a server.. Thirdly, fill ipcamera as DDNS user, fill password ipcamera2012 as DDNS password, fill ycxgwp.no-ip.infoas DDNS domain and server URL, Then click save to make effect. The camera will restart and to take the DDNS settings effective. Fourthly, after the restart, login the camera, and go to option of Device Status on the administrator panel, and check if the DDNS status is successful. If failed, please double check if you have input the correct hostname, user name, and password, and try to redo the settings.NOTE:If you have set Third Party DDNS successfully ,the Domain Name will be invalid. The Third Party DDNS and the Domain Name cannot work at the same time, the last time you configured will take effect. Dĸo port forwarding within the routerExample: The camera’s LAN IP address is http://192.168.8.100:2000 , Media port no. is 9200.Firstly, login the router, goes to the menu of Port Forwarding or Port Trigger (or named Virtue Server on some brands of router). Take Linksys brand router as an example, Login the router, and goes to Applications & Gaming->Single Port Forwarding. Secondly, Create a new column by LAN IP address & HTTP Port No. of the camera within the router showed as below. Figure 4.29Assign a name as you like here Fill the Media Port no. of the camera on the column of External Port and Internal Port
50 50ĹUse domain name to access the camera via internet After the port forwarding is finished, you can use the domain name+ http no. to access the camera via internet. Take hostname ycxgwp.no-ip.info and http no. 2000 for example, the accessing link of the camera via internet would be http:// ycxgwp.no-ip.info:20004.3.4 UPnP Figure 4.30 The default UPnP status is closed. You can enable UPnP, then the camera’s software will be configured for port forwarding. Back to the “Device Status” panel, you can see the UPnP status: Figure 4.31 The camera’s software will be configured for port forwarding. There may be issues with your routers security settings, and sometimes may error. We recommend you configure port forwarding manually on your router. 4.3.5 Port This camera supports HTTP Port / HTTPS Port/ ONVIF Port. HTTP Port is used to access the camera remotely. If you want to access the camera and view the video. HTTP port : By default, the HTTP and Media port is set to 88. Also, they can be assigned with another port number between 1 and 65535. But make sure they can not be conflict with other existing ports like 25, 21.
51 51Figure 4.32Another way to change the HTTP port NO. Step 1: Open the IP Camera Tool, select the camera you would like to change the port of, right click on the IP address, and click on ”Network Configuration”, this brings up the network configuration box as shown in Figure 4.35 and 4.36. Figure 4.33Figure 4.34Select which camera you’d like to change the port for, and right clickModify the Http Port.Enter the Username and password, click OK.
52 52Step 2: Enter the username and password of the Administrator (default username is admin with a blank password), and click “OK” to apply changes. Step 3: Wait around 10 seconds, you’ll see that the camera’s LAN IP address has changed. In our example it was changed to 2000, so we see http://192.168.1.110:2000 in IP Camera Tool. Also, the LAN IP address is now fixed at a static IP address of http://192.168.1.110:2000 . This IP address will not change even if the camera is powered off and back on, the camera will remain on this LAN IP address. This is very important that a static LAN IP address is set, or you may have problems later with remote access and seeing the camera remotely if the camera loses power and reconnects on a different LAN IP address. Make sure you set a static LAN IP address! Figure 4.35If the camera cannot be accessed, please make sure the port forwarding is succeed. ONVIF port: By default, the ONVIF port is set to 888. Also, they can be assigned with another port number between 1 and 65535(except 0 and 65534). But make sure they can not be conflict with other existing ports. HTTPS port: The default port is 443. You can use the url to access the camera: https:// IP + HTTPS port.RTSP port: The default port is 443. Only some IP Cameras have RTSP port. 4.3.6 Mail Settings If you want the camera to send emails when motion has been detected, here Mail will need to be configured.
53 53Figure 4.361----- SMTP Server/ Port /Transport Layer Security Enter SMTP server for sender. SMTP port is usually set as 25. Some SMTP servers have their own port, such as 587 or 465, and Transport Layer Security usually is None. If you use Gmail, Transport Layer Security must be set to TLS or STARTTLS and SMTP Port must be set to 465 or 25 or 587, which port you choose should be decided by which Transport Layer Security you select. 2-----SMTP Username/ password ID account and password of the sender email address 3----- Sender E-mail Mailbox for sender must support SMTP 4----- Receiver Mailbox for receiver need not support SMTP,you can set 4 receivers 5---- Save Click Save to take effect 6---- Test Click Test to see if Mail has been successfully configured. Click Test to see if Mail has been successfully configured.
54 54Figure 4.37If the test success, you can see the Success behind the Test, at the same time the receivers will receive a test mail.If the test fails with one of the following errors after clicking Test, verify that the information you entered is correct and again select Test . 1) Cannot connect to the server 2) Network Error. Please try later 3) Server Error 4) Incorrect user or password 5) The sender is denied by the server. Maybe the server need to authenticate the user, please check it and try again 6) The receiver is denied by the server. Maybe because of the anti-spam privacy of the server 7) The message is denied by the server. Maybe because of the anti-spam privacy of the server 8) The server does not support the authentication mode used by the device 4.3.7 FTP Settings If you want to upload record files and images to your FTP serverˈyou can set FTP Settings. Test result
55 55Figure 4.38Figure 4.39FTP server: If your FTP server is located on the LAN. If you have an FTP server which you can access on the internet. Port: Default is port 21. If changed, external FTP client program must change the server connection port accordingly. FTP Mode: Here supports two modes: PORT and PASV.Username/password: The FTP account and password. Click Save to take effect. Click Test to see if FTP has been successfully configured.
56 564.3.8 P2P Access the IP Camera by Smart Phone (Android or iOS operating system) First of all, you need to open the P2P function of the IP Camera at “Settings-->Network-->P2P”. Figure 4.404.4 Video This section allows you to configure Video stream settings, On screen display and Snapshot settings. 4.4.1 Video Settings There are two ways to set the stream video settings. They are main stream video settings and sub stream video settings. Figure 4.41Enhanced Night video Definition: The camera will automatically drop the frame to extend the recording time in the night.
57 57Stream Type: There are four types to identify different streams you have set. If select the HD Mode, the clearer video will become, and it will take up more bandwidth; If select the Smooth Mode, the bandwidth is very narrow, and bit rate is large, that will lead to video can not play well. The Equilibrium Model is a value between HD Mode and Smooth Mode. Resolution: The camera supports multiple types, For example: 960P, 720P, VGA, QVGA. The higher the resolution is, the clearer video will become. But the code flux will become larger too, and it will take up more bandwidth. Bit Rate: Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate is large, that will lead to video can not play well. Frame Rate: Note that a larger frame size takes up more bandwidth. When the video format is 50Hz, the maximum frame rate is 25 fps. When the video format is 60Hz, the maximum frame rate is 30 fps. You should lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you can achieve fluently video. The maximum frame rate for each model is different, please see the “Specifications”. Key Frame Interval: The time between last key frame and next key frame. The shorter the duration, the more likely you will get a better video quality, but at the cost of higher network bandwidth consumption. Variable bitrate: Select the Bit rate type to constant or variable. If select Yes, the camera will change the video bit rate according to the situation, but will not more than the maximum parameter "Bit Rate"; If select No, the Bit Rate is unchanged.4.4.2 On Screen Display This page is used to add time-stamp and device name on the video. Figure 4.42Display Timestamp: There are two options: Yes or NO. Select Yes and you can see the system date on the video. Display Camera Name: There are two options: Yes or NO. Select Yes and you can see the device name on the video.
58 584.4.3 Privacy Zone NOTE:FC2406 and FC2407P do not support the function. This page is used to set some mask as privacy zone on the video. Figure 4.43Allow On Screen Display Mask: There are two options: Yes or NO. Select Yes, then click “Set Privacy Zone” and draw a privacy area on the video, the privacy area will be black on the video. Figure 4.44Click OK button and return to the page, click Save to take effect. Back to the surveillance window, you can see the mask area as the following picture: The mask area
59 59Figure 4.454.4.4 Snapshot Settings On this page you can set the snapshot pictures’ image quality and the storage path. Figure 4.46Snap Quality: Low, Middle and High. The higher the quality, the picture will be clearer.
60 60Pictures Save To: FTP or SD Card. If you have done FTP and Alarm settings, when alarming, the camera will snap pictures to the FTP automatically. If select SD Card as the save path, make sure the camera has inserted in the SD card. Enable timing to capture To enable capture interval, follow the steps below: 1Select Enable timing to capture 2 Capture interval:The interval time between two captures. 3 Select the capture time z Capture anytime Click the black button up the MON, you will see all time range turn red. When something moving in the detection area at anytime, the camera will capture. z Specify an capture schedule Click the week day words, the corresponding column will be selected. For example, click TUE, the all column of TUE turns to red, that means during Tuesday whole day, the camera will capture. z Press the left mouse and drag it on the time boxes, you can select the serial area, 4Click Save button to take effect. 4.4.5 IR LED Schedule On this page you can set the schedule time for switching IR LED lights. When parameter Mode is set to the Schedule on the Live Video window, at these schedule time, the IR LED lights will be turned off. Figure 4.474.5 Alarm 4.5.1 Action Detection IP Camera supports Motion Detection Alarm,when the motion has been detected, the IP Camera will make a alarm.
61 61Figure 4.48To enable action detection, follow the steps below: Step 01: Enable action detectionStep 02: Select the “on” from the dropdown box to activate the motion detection alarm. Step 03: Select the “on” from the dropdown box to activate the human detection alarm. Step 04: Sensitivity---- It supports five modes: Lowest, Lower, Low, Medium and High. The higher the sensitivity, the camera will be more easily alarmed. Select one motion sensitivity. Step 05: Trigger interval--- The interval time between two motion detection. Step 06: Select the alarm indicator There are some alarm indicators:
62 62A Camera Sound and PC Soundif you select Camera Sound or PC Sound, when the motion has been detected, the people around the camera will hear beep alarm sound. B Send E-mail If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail Settings first. C Take Snapshot If you select this checkbox, when the motion has been detected, the camera will snap the live view window as a still picture and load it to the FTP. Make sure you have set FTP and set FTP as the storage path in Video->Snapshot settings panel. Capture interval: The interval time between two pictures. D Recording(except for FC1403P)If you select this checkbox, when the motion has been detected, the camera will record automatically and store the record files to the SD Card. Make sure the camera has inserted SD card and you have set the SD card as the Alarm record files storage path, please go to Record—> Storage location page to verify this settings. The default alarm record time is 30s and pre-alarm record time is 5s, please go to Record—> Alarm Record page and change the alarm time settings. E IO Output(Only FC2407 and FC2501PA) If IO alarm is triggered and IO alarm output device will always alarm (sound alarm is issued a warning sound, alarm lights in flash etc.). Click "Clear IO alarm output" , the alarm output device will stop alarming. If IO alarm is triggered again after alarm interval, IO alarm output device will be restart. Step 07: Set detect areaClick set detect area and it pop up a window, then you can draw the detection area. Click OK button after settings. When something moving in the detection area, the camera will alarm.
63 63Figure 4.49Step 08: Alarm Schedule Alarm anytime when motion is detectedķClick the black button up the MON, you will see all time range turn red. When something moving in the detection area at anytime, the camera will alarm. Figure 4.50 Specify an alarm scheduleĸClick the week day words, the corresponding column will be selected. For example, click TUE, the all column of TUE turns to red, that means during Tuesday whole day, when something moving in the detection area, the camera will alarm. Click this button and select all time range
64 64Figure 4.51 Press the left mouse and drag it on the time boxes, you can select the serial areaĹ.Figure 4.52Step 09: Click Save button to take effect. When the motion has been detected during the detection time in the detection area, the camera will alarm and adopt the corresponding alarm indicators. NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere and anytime. 4.5.2 Sound Detection(Only FC2501PA and FC2501P) When the ambient sound over a certain decibel ,the sound alarm will be triggered.
65 65If the Sensitivity is set to “High”, the camera will detect the sound whose more than 55db. If the Sensitivity is set to “Medium”, the camera will detect the sound whose more than 65db. If the Sensitivity is set to “Low”, the camera will detect the sound whose more than 75db. If the Sensitivity is set to “Lower”, the camera will detect the sound whose more than 85db. If the Sensitivity is set to “Lowest”, the camera will detect the sound whose more than 95db. About the other operation of the sound detection, please refer to the ”Motion detection”. 4.5.3 IO Alarm(Only FC2407P and FC2501PA) This IP camera provides a I/O alarm terminal block which is used to connect to external input / output device. The alarm device(door sensor, infrared sensor, smoke detectors, etc) send input command to the network camera, then the network camera send output command to the alarm output device(local audible alarm, lights alarm,etc.).
66 66Figure 4.53There is an IO alarm input/output interface in the camera rear. Enable IO alarm need this interface to connect to the alarm device (door sensor, infrared sensor, smoke detector, etc.). Which is the IO alarm output or IO alarm input, please refer to the Installation Guide. Setting IO alarmOn the IO page, Enable the I/O alarm, select the “Send E-mail” or ”Snapshot” before you have configured the mail or FTP. If an IO alarm is triggered and IO alarm output device will always alarm (sound alarm is issued a warning sound, alarm lights in flash etc.). Click "Clear IO alarm output" , the alarm output device will stop alarming. If IO alarm is triggered again after alarm interval, IO alarm output device will be restart.
67 67Figure 4.544.6 Record This section will allow you to change the record files storage path and the record time. 4.6.1 Storage Location On this page you can change the alarm and manually recording storage path. Figure 4.55Click this button and select all time range.
68 68Recording Location: SD card or FTP. When the camera alarmed, it will store the alarm files to the SD card or FTP. Make sure the camera has been inserted the SD card. On this page, you can see the available space of the SD card. Local Recording Location: For Windows OS, the location recording path is c:/ IPCamRecord, you can change another one. For MAC OS, the manual recording path is: / IPCamRecord. Enter the local folder: Click here, You can enter the local storage folder. 4.6.2 Alarm Recording This page you can change the Pre-record time and Alarm record time. Figure 4.56The default Pre-recorded time is 5s and the alarm record time is 30s, you can change another time, click Save button to take effect. 4.6.3 Local Alarm Recording This page you can enable the local alarm record and Local Alarm record time. Figure 4.574.6.4 Scheduled Recording On the page you can configure the schedule record. When the parameter Recording Location is set SD Card on the Storage Location page, you can configure parameters as shown in follow figure.
69 69Figure 4.58When the parameter Recording Location is set FTP on the Storage Location page, you can configure parameters as shown in follow figure. Figure 4.59Click Save button to take effect.
70 704.6.5 SD Card Management NOTE:The FC1403P doesn’t support the function. This camera supports SD Card and the max size of SD card must be under 32G. Go to the SettingsÆDevice StatusÆDevice Status page, you can see the SD card status. Figure 4.60The default storage path of alarm record files is SD card, when the available size of SD card is less than 256M, the old record files will be deleted automatically. 4.7 PTZ This page will allow you to change the pan/tilt speed and do cruise tracks settings. NOTE:The FC1403P doesn’t support the function.
71 714.7.1 Pan/Tilt Speed There are five Pt speed types: very fast, fast, normal, slow and very slowly. Select the desired PTZ speed type and click save button . Figure 4.61Only FC2503PZ supports Zoom speed. 4.7.2 Cruise Settings This section explains how to add/ delete one cruise track. Figure 4.62Setting the Cruise Mode There are two cruise mode: Cruise time and Cruise Loops. Cruise time: Select Cruise time from Cruise Mode drop-down, then you can set the Cruise time of the camera.Cruise Loops:Select Cruise Loops from Cruise Mode drop-down, you can set the Cruise Loops of the camera.Click Save to take effect.
72 72Figure 4.63Manage the Cruise Track There are two default cruise tracks: Vertical and Horizontal. Vertical: The camera will rotate from up to down Horizontal: The camera will rotate form left to right. Add: Add one cruise track, then click save button. Delete: Select one cruise track and delete it. Save: After you modify the Dwell time, you should click Save button to take effect. ExampleHow to do add cruise tracks ? Firstly, Click Add button and enter a descriptive name to identify the cruise track. Secondly: On the lower left of the page, you can see all preset points you have added. Select one preset point and click Add button, you can see the preset point has been added to the cruise track on the cruise track page. You need to add two or more preset points to the cruise track.
73 73Figure 4.64Thirdly: Click OK button and the cruise track will take effect. You can add other cruise track as the same method. For example: I have added three preset points to the “track 1”, that means : When I select the “track 1” on the surveillance window, the camera moves as the following track: upright then Right Most last downleft. You can add preset on the left of the surveillance window. The new added track name . 1 Select one preset point. 2 Click Add button.Here you can see the preset point has been added to one track. And you can set the stay time. Add the preset.
74 74Figure 4.65After add the cruise track, back to the surveillance window, click Cruise, here you can see all cruise tracks you have added. Figure 4.66There are other buttons between the Preset points and Cruise track, you can use these buttons to adjust the order of preset points or add/delete one preset points in one cruise track, Figure 4.67The cruise tracks have added to the “track 1” .
75 75Add: Select one preset points and add it to the selected cruise track. Delete: Select one preset points you have added to one cruise track, click delete. Move up/ down: Select one cruise track, adjust the order of preset points in one cruise track. Attention: Considering the life time and thermal issue of the motor, it’s not recommend to do long-time cruise. 4.7.3 Start-Up Options Here section will allow you to set the stop position after the camera reboots. It supports three modes: Disable Start-Up, Go To Home Position and Go To Preset Position. Disable Start-Up: When rebooting, the camera will not pan / tilt. Go To Home Position: When rebooting, the camera will pa Providing Central Management Software to manage or monitor multi-cameras n / tilt and stops at center. Go To Preset Position: Select one preset position and save it. When rebooting, the camera will pan/ tilt and stops at the preset position you have set. Figure 4.684.8 FirewallThis section explains how to control the access permission by checking the client PC’s IP addresses. It is composed of the following columns: Block access from these IP addresses and Only allow access from these IP addresses.
76 76Figure 4.69Enable firewall, If you select Only allow access from these IP addresses and fill in 8 IP addresses at most, only those clients whose IP addresses listed in the Only allow access from these IP addresses can access the Network Camera. If you select Block access from these IP addresses, only those clients whose IP addresses are in the IP list cannot access the Network Camera. Click Save to take effect.4.9 System In this panel, you can backup/restore your camera settings, upgrade the firmware to the latest version, restore the camera to default settings and reboot the device. 4.9.1 Back-up& Restore Click Backup to save all the parameters you have set. These parameters will be stored in a bin file for future use.Click Browse and select the parameters file you have stored, then click Submit to restore the restore the parameters.
77 77Figure 4.704.9.2 System Upgrade Your current firmware version will be displayed on your screen. You may go to the Device StatusÆDevice Information Page to check for the latest firmware versions available. Click Browse, choose the correct bin file and then click System upgrade.Don’t shut down the power during upgrade. After upgrading, you can see the upgrade result. Figure 4.71Upgrade Firmware by IP Camera Tool Double click the IP Camera Tool shot icon , select the Camera IP that you want to upgrade the firmware. Then select Upgrade Firmware and enter the username and password, choose the firmware file, and upgrade.
78 78Figure 4.72Figure 4.73CAUTION: If your camera works well with the current firmware, we recommend not upgrading. Please don’t upgrade the firmware unnecessarily. Your camera may be damaged if misconfigured during an upgrade. NOTE:1) Before upgrade the firmware, please unplug the SD card and reboot the camera, don’t upgrade the firmware in WAN through the web UI, or else the upgrade process may be failed. 2) Please ensure you have download the correct firmware package for your camera before upgrading. Read the upgrade documentation (readme.txt file) in the upgrade package before you upgrade. 3) Upon downloading the firmware check the sizes of the .bin files. They must match the size in the readme.txt file. If not, please download the firmware again until the sizes are the same. Your camera will not function correctly if a corrupt .bin file is used. 4) Normally, only Device WEB UI need to be upgrade, please do not try to upgrade the Device System Firmware. 5) Never shut down the power of the camera during upgrade until the IP camera restart and get connected. 6) After upgrade successfully, please uninstall the old plugin and re-install it, then reset the camera to the Enter the User name and password
79 79default factory settings before using the camera. 4.9.3 Patch Installation Click "Browse" to select the correct patch file, and then click "Install Patch" to install the patch. Do not turn off the power during it installing. After installing is complete, you will receive a system prompt. 4.9.4 Factory Reset Click All reset and all parameters will return to factory settings if selected. This is similar to press the Reset button on the bottom of the camera. Figure 4.744.9.5 Reboot Click Reboot System to reboot the camera. This is similar to unplugging the power to the camera. Figure 4.755 Playback On this page you can view the record files stored in the SD card. NOTE:
80 80The FC1403P does not support the function. Section 1 Define the Record files time and Type : The storage path of record files : Here supports three types: current day, current month and All records. Another way, select the time on the time&date manually. : The type of records files, Here supports two typs: Normal record, Alarm record and All records. : Click this button to search all record files satisfy the conditions you selected. Continuous Play: Select the checkbox to play continuously all the record files. 123
81 81Section 2 Search record files On this panel you can see all record files satisfy the conditions you set. Section 3 Play/Stop/Audio/Full screen buttons Please select one record file before use these buttons. Click this button to play the record files Click this button to stop the record files Open or stop audio Click this button to make full screen, and double click left mouse to exit full screen. 6 Appendix 6.1 Frequently Asked Questions NOTE:Any questions you would meet, please check Network connections firstly. Check the working status revealed by the indicators on the network server, hub, exchange and network card. If abnormal, check the network connections.
82 826.1.1 Install the add-on of Firefox browser, Google Chrome and IE Chrome. Figure 6.1 Figure 6.2
83 83Figure 6.3 Figure 6.4
84 84Figure 6.5 Figure 6.6
85 856.1.2 Uninstall the add-on of Firefox browser, Google Chrome and IE Chrome. Figure 6.7
86 86Figure 6.8 Figure 6.9 6.1.3 I have forgotten the administrator password To reset the administrator username and password, press and hold down the RESET BUTTON for 5 seconds. Upon releasing the reset button, wait for 20 seconds, the camera will reboot and the username and password will return to the factory default administrator username and password. Please power on the camera before resetDefault administrator username: adminDefault administrator password: No password 6.1.4 Camera can not record Camera can not record when I click Record button or I can’t change the manually record path. When you use Windows7 or Vista, you may be not able to do manually record or change the record path because of the security settings of computer. There are two ways to resolve this problem: (1) Please add the camera as a trusted site to resolve this issue. The steps are
87 87 IE browserÆToolÆInternet PropertiesÆSecurityÆTrusted sitesÆSitesÆAdd(2) Open IE browser, then right click, select “Run as administrator” 6.1.5 Subnet doesn’t match Check whether your ipcamera in the same subnet of your computer. The step is Control PanelÆNetwork ConnectionsÆDbclick Local Area Connections Æ Choose GeneralÆProperties.(Figure 3.23/3.24) Check subnet mask, IP address and gateways. When you set IP address please make sure they are in the same subnet. Otherwise you can't access camera. 6.1.6 No Pictures Problems The video streaming is transmitted by the ActiveX controller. If ActiveX controller isn’t installed correctly you will see no video image. You can resolve this problem by this way: Download ActiveX controller and set the safety property of IE in the PC when you view it first time: IE browserÆToolÆInternet ProperÆSecurityÆCustom LevelÆActiveX control and Plug-ins. Three options of front should be set to be “Enable”, The ActiveX programs read by the computer will be stored. As follows: Enable: Download unsigned ActiveX controls Enable: Initialize and script ActiveX controls not marked as safe Enable: Run ActiveX controls and plug-ins Figure 6.6 If you allow the ActiveX running, but still could not see living video. Please change another port number to try. Don’t use port 88.
88 88Figure6.7 NOTE:Make sure that your firewall or anti-virus software does not block the camera or ActiveX. If you could not see video, please shut down firewall or anti-virus software to try again. 6.1.7 Can’t access IP camera in internet There are some reasons: 1ǃActiveX controller is not installed correctly 2ǃThe port which camera used is blocked by Firewall or Anti-virus software. Please change another port number and try again. 3ǃPort forwarding is not successful Check these settings and make sure they are correct. 6.1.8 UPnP always failed UPnP only contains port forwarding in our recent software. Sometimes, it may be failed to do port forwarding automatically because of firewall or anti-virus software. It also has much relation with router’s security settings. So we recommend you do port forwarding manually. You can view your camera in internet successfully after you do port forwarding manually in your router. 6.1.9 Camera can not connect wireless If your camera could not connect wireless after you set wireless settings and plug out the cable. Please check whether your settings are correct or not. Normally, camera can’t connect wireless mainly because of wrong settings. Make sure broadcast your SSID; use the same encryption for router and camera. 6.1.10 Can’t see other cameras listed Can’t see other cameras listed in multi-device when using remote access. If you want to view all the cameras via the WAN, verify that each camera added in the multi-device settings can be accessed by using the DDNS name and port number. Use the DDNS domain name not the camera’s LAN IP. (For more details see: How to add cameras in WAN)
89 896.2 Default Parameters Default network Parameters IP address: obtain dynamically Subnet mask: obtain dynamically Gateway: obtain dynamically DDNS: Embedded domain name Username and password Default username is admin with a blank password.6.3 Specifications ITEMS FC1403P Image Sensor Sensor High Definition Color CMOS Sensor Display Resolution 1280 x 720 (1Megapixel) Min. Illumination 0 Lux (With IR Illuminator) LensLens Type Glass Lens focal length f:2.8mmAperture F:2.4 Angle of View Horizontal:70° Diagonal :75° Video Image Compression H.264 Image Frame Rate 30fps maximum, downward adjustable Resolution 720P(1280 x 720), VGA(640 x 480), VGA(640 x 360), QVGA(320 x 240), QVGA(320 x 180) Stream dual streamImage adjustment The hue, brightness, contrast, saturation, sharpness are adjustable Flip image flip and mirror Infrared mode Automatic or manual Night visibility 11pcs IR-LEDs, night vision range up to 8 meters AudioInput/Output Supports two-way audio Built-in Mic & Speaker Audio Compression PCM/G.726 Network Ethernet One 10/100Mbps RJ45 port Remote Access P2P, DDNS Network Protocol IPǃTCPǃUDPǃHTTPǃHTTPSǃSMTPǃFTPǃDHCPǃDDNSǃUPnPǃRTSPǃONVIFOperating System Microsoft Windows 2000/XP, Vista, 7, 8; Mac OS
90 90System Requirements iOSǃAndroid Browser Microsoft IE8 and above version or compatible browser; Mozilla Firefox; Google Chrome; Apple Safari. Other Features Motion Detection Alarm via E-Mail, upload alarm snapshot to FTP Privacy Zone Set privacy zone manually User Accounts Three levels user role Firewall Supports IP FilteringStorage local storageReset Reset button is available Power Power Supply DC 5V/1.5A Power Consumption 5.0 Watts (Max.) Physical Dimension(LxWxH) 75(L)x 69(W)x 132(H) mm Gross Weight 390g Net Weight 180g EnvironmentOperate Temper. -10° ~ 50°C (14°F ~ 122°F) Operating Humidity 20% ~ 85% non-condensing Storage Temper. -20°C ~ 60° (-4°F ~ 140°F) Storage Humidity 0% ~ 90% non-condensing Certification CE, FCC, RoHS ITEMS FC2401P Image Sensor Sensor High Definition Color CMOS Sensor Display Resolution 1280 x 720 (1Megapixels) Min. Illumination 0 Lux (With IR Illuminator) Lens Lens Type Glass Lens focal length f:2.8mmAperture F2.4 Angle of View Horizontal:70° Diagonal :75° Video Image Compression H.264 Image Frame Rate 30fps maximum, downward adjustable Resolution 720P(1280 x 720), VGA(640 x 480), VGA(640 x 360), QVGA(320 x 240), QVGA(320 x 180) Stream dual stream Image adjustment The hue, brightness, contrast, saturation, sharpness are adjustableFlip image flip and mirror Infrared mode Automatic or manual Pan/Tilt Angle Horizontal:300° & Vertical: 120°
91 91Night visibility 11pcs IR-LEDs, night vision range up to 8 meters Audio Input/Output Supports two-way audio Built-in Mic & Speaker 3.5mm audio jack for external Mic & Speaker Audio Compression PCM/G.726 Network Ethernet One 10/100Mbps RJ45 port Wireless Standard IEEE802.11b/g/n Data Rate IEEE802.11b: 11Mbps(Max.); IEEE802.11g: 54Mbps(Max.); IEEE802.11n: 150Mbps(Max.). Wireless Security WEP, WPA, WPA2 WPS Supports WPS one button push wireless connection Network Protocol IPǃTCPǃUDPǃHTTPǃHTTPSǃSMTPǃFTPǃDHCPǃDDNSǃUPnPǃRTSPǃWPSǃONVIF Remote Access P2P, DDNS System Requirements Operating System Microsoft Windows XP, Vista, 7, 8; Mac OS iOSǃAndroid Browser Microsoft IE8 and above version or compatible browser; Mozilla Firefox; Google Chrome; Apple Safari. Other Features Motion Detection Alarm via E-Mail, upload alarm snapshot to FTP Privacy Zone Set privacy zone manually User Accounts Three levels user role Firewall Supports IP Filtering Storage Micro SD card and local storage Reset Reset button is available Power Power Supply DC 5V/2.0A Power Consumption 7.5 Watts (Max.) Physical Dimension(LxWxH) 110(L)*103(W)*127(H) mm Gross Weight 680g Net Weight 310g Environment Operating Temperature -10° ~ 55°C (14°F ~ 131°F) Operating Humidity 20% ~ 85% non-condensing Storage Temperature -20°C ~ 60° (-4°F ~ 140°F) Storage Humidity 0% ~ 90% non-condensing Certification CE, FCC, RoHS ITEMS FC2402P Image Sensor Sensor High Definition Color CMOS Sensor Display Resolution 1280 x 720 (1Megapixels) Min. Illumination 0 Lux (With IR Illuminator)
92 92Lens Lens Type Glass Lens focal length f:2.8mmAperture F2.4 Angle of View Horizontal:60° Diagonal :65° Video Image Compression H.264 Image Frame Rate 30fps maximum, downward adjustable Resolution 720P(1280 x 720), VGA(640 x 480), VGA(640 x 360), QVGA(320 x 240), QVGA(320 x 180) Stream dual stream Image adjustment The hue, brightness, contrast, saturation, sharpness are adjustableFlip image flip and mirror Infrared mode Automatic or manual Pan/Tilt Angle Horizontal:300° & Vertical: 115° Night visibility 9pcs IR-LEDs, night vision range up to 8 meters Audio Input/Output Supports two-way audio Built-in Mic & Speaker 3.5mm audio jack for external Mic & Speaker Audio Compression PCM/G.726 Network Ethernet One 10/100Mbps RJ45 port Wireless Standard IEEE802.11b/g/n Data Rate IEEE802.11b: 11Mbps(Max.); IEEE802.11g: 54Mbps(Max.); IEEE802.11n: 150Mbps(Max.). Wireless Security WEP, WPA, WPA2 WPS Supports WPS one button push wireless connection Network Protocol IPǃTCPǃUDPǃHTTPǃHTTPSǃSMTPǃFTPǃDHCPǃDDNSǃUPnPǃRTSPǃWPSǃONVIF Remote Access P2P, DDNS System Requirements Operating System Microsoft Windows XP, Vista, 7, 8; Mac OS iOSǃAndroid Browser Microsoft IE8 and above version or compatible browser; Mozilla Firefox; Google Chrome; Apple Safari. Other Features Motion Detection Alarm via E-Mail, upload alarm snapshot to FTP Privacy Zone Set privacy zone manually User Accounts Three levels user role Firewall Supports IP Filtering Storage Micro SD card and local storage Reset Reset button is available Power Power Supply DC 5V/2.0A Power Consumption 7.5 Watts (Max.) Physical Dimension(LxWxH) 115.7(L) x113.5(W) x152(H) mm
93 93Gross Weight 685g Net Weight 320g Environment Operating Temperature -10° ~ 55°C (14°F ~ 131°F) Operating Humidity 20% ~ 85% non-condensing Storage Temperature -20°C ~ 60° (-4°F ~ 140°F) Storage Humidity 0% ~ 90% non-condensing Certification CE, FCC, RoHS ITEMS FC2403P Image Sensor Sensor High Definition Color CMOS Sensor Display Resolution 1280 x 720 (1Megapixels) Min. Illumination 0 Lux (With IR Illuminator) LensLens Type Glass Lens focal length f:2.8mmAperture F2.4 Angle of View Horizontal:60° Diagonal :65° Video Image Compression H.264 Image Frame Rate 30fps maxmium, downward adjustable Resolution 720P(1280 x 720), VGA(640 x 480), VGA(640 x 360), QVGA(320 x 240), QVGA(320 x 180) Stream dual streamImage adjustment The hue, brightness, contrast, saturation, sharpness are adjustable Flip image flip and mirror Infrared mode Automatic or manual Pan/Tilt Angle Horizontal:300° & Vertical: 90° Night visibility 11pcs IR-LEDs, night vision range up to 8 metres AudioInput/Output Supports two-way audioBuilt-in Mic & Speaker3.5mm audio jack for external Mic & Speaker Audio Compression PCM/G.726 Network Ethernet One 10/100Mbps RJ45 port Wireless Standard IEEE802.11b/g/n Data Rate IEEE802.11b: 11Mbps(Max.);IEEE802.11g: 54Mbps(Max.);IEEE802.11n: 150Mbps(Max.). Wireless Security WEP, WPA, WPA2 WPS Supports WPS one button push wireless connection Network Protocol IPǃTCPǃUDPǃHTTPǃHTTPSǃSMTPǃFTPǃDHCPǃDDNSǃUPnPǃRTSPǃWPSǃONVIF Remote Access P2P, DDNS
94 94SystemRequirements Operating System Microsoft Windows XP, Vista, 7, 8; Mac OS iOSǃAndroid Browser Microsoft IE8 and above version or compatible browser; Mozilla Firefox; Google Chrome; Apple Safari. OtherFeaturesMotion Detection Alarm via E-Mail, upload alarm snapshot to FTP Privacy Zone Set privacy zone manually User Accounts Three levels user role Firewall Supports IP FilteringStorage Micro SD card and local storage Reset Reset button is available Power Power Supply DC 5V/2.0A Power Consumption 5 Watts (Max.) Physical Dimension(LxWxH) 110(L)*110(W)*135(H) mm Gross Weight 678.2g Net Weight 310g EnvironmentOperating Temperature -10° ~ 50°C (14°F ~ 122°F) Operating Humidity 20% ~ 85% non-condensing Storage Temperature -20°C ~ 60° (-4°F ~ 140°F) Storage Humidity 0% ~ 90% non-condensing Certification CE, FCC, RoHS ITEMS FC2405P Image Sensor Sensor High Definition Color CMOS Sensor Display Resolution 1280 x 720 (1Megapixels) Min. Illumination 0 Lux (With IR Illuminator) LensLens Type Glass Lens focal length f:2.8mmAperture F2.4 Angle of View Horizontal:70eDiagonal :75eVideoImage Compression H.264 Image Frame Rate 30fps maxmium, downward adjustable Resolution 720P(1280 x 720), VGA(640 x 480), VGA(640 x 360), QVGA(320 x 240), QVGA(320 x 180) Stream dual streamImage adjustment The hue, brightness, contrast, saturation, sharpness are adjustable Flip image flip and mirror Infrared mode Automatic or manual Pan/Tilt Angle Horizontal:300e & Vertical: 90e
95 95Night visibility 11pcs IR-LEDs, night vision range up to 8 metres AudioInput/Output Supports two-way audio Built-in Mic & Speaker 3.5mm audio jack for external Mic & Speaker Audio Compression PCM/G.726 NetworkEthernet One 10/100Mbps RJ45 port Wireless Standard IEEE802.11b/g/n Data Rate IEEE802.11b: 11Mbps(Max.); IEEE802.11g: 54Mbps(Max.); IEEE802.11n: 150Mbps(Max.). Wireless Security WEP, WPA, WPA2 WPS Supports WPS one button push wireless connection Network Protocol IPǃTCPǃUDPǃHTTPǃHTTPSǃSMTPǃFTPǃDHCPǃDDNSǃUPnPǃRTSPǃWPSǃONVIFRemote Access P2P, DDNS SystemRequirementsOperating System Microsoft Windows XP, Vista, 7, 8; Mac OS iOSǃAndroid Browser Microsoft IE8 and above version or compatible browser; Mozilla Firefox; Google Chrome; Apple Safari. OtherFeaturesMotion Detection Alarm via E-Mail, upload alarm snapshot to FTP Privacy Zone Set privacy zone manually User Accounts Three levels user role Firewall Supports IP FilteringStorage Micro SD card and local storage Reset Reset button is available Power Power Supply DC 5V/2.0A Power Consumption 5 Watts (Max.) PhysicalDimension(LxWxH) 106(L)*103(W)*131(H) mm Gross Weight 668.2g Net Weight 300g EnvironmentOperating Temperature -10e ~ 50eC (14eF ~ 122eF)Operating Humidity 20% ~ 85% non-condensing Storage Temperature -20eC ~ 60e (-4eF ~ 140eF)Storage Humidity 0% ~ 90% non-condensing Certification CE, FCC, RoHS ITEMS FC2406P Image Sensor Sensor High Definition Color CMOS Sensor Display Resolution 1280 x 720 (1Megapixels)
96 96Min. Illumination 0 Lux (With IR Illuminator) LensLens Type Glass Lens focal length f:2.8mmAperture F2.4 Angle of View Horizontal:70eDiagonal :75eVideo Image Compression H.264 Image Frame Rate 23fps(1280 x 720P), 25fps(VGA), 25fps(QVGA) Stream dual stream Image adjustment The hue, brightness, contrast, saturation, sharpness are adjustable Flip image flip and mirror Infrared mode Automatic or manual Pan/Tilt Angle Horizontal:300° & Vertical: 120° Night visibility 11pcs IR-LEDs, night vision range up to 8 metres Audio Input/Output Supports two-way audio Built-in Mic & Speaker 3.5mm audio jack for external Mic & Speaker Audio Compression PCM/G.726 Network Ethernet One 10/100Mbps RJ45 port Wireless Standard IEEE802.11b/g/n Data Rate IEEE802.11b: 11Mbps(Max.); IEEE802.11g: 54Mbps(Max.); IEEE802.11n: 150Mbps(Max.). Wireless Security WEP, WPA, WPA2 WPS Supports WPS one button push wireless connection Network Protocol IPǃTCPǃUDPǃHTTPǃHTTPSǃSMTPǃFTPǃDHCPǃDDNSǃUPnPǃRTSPǃWPS Remote Access P2P, DDNS SystemRequirementsOperating System Microsoft Windows XP, Vista, 7, 8; Mac OS iOSǃAndroid Browser Microsoft IE8 and above version or compatible browser; Mozilla Firefox; Google Chrome; Apple Safari. Other FeaturesMotion Detection Alarm via E-Mail, upload alarm snapshot to FTP User Accounts Three levels user role Firewall Supports IP Filtering Storage Micro SD card and local storage Reset Reset button is available Power Power Supply DC 5V/2.0A Power Consumption 7.5 Watts (Max.)
97 97Physical Dimension(LxWxH) 110(L)*103(W)*127(H) mm Gross Weight 680g Net Weight 310g EnvironmentOperating Temperature -10° ~ 50°C (14°F ~ 122°F) Operating Humidity 20% ~ 85% non-condensing Storage Temperature -20°C ~ 60° (-4°F ~ 140°F) Storage Humidity 0% ~ 90% non-condensing Certification CE, FCC, RoHS Warranty Limited 2-year warrantyITEMS FC2407P Image Sensor Sensor High Definition Color CMOS Sensor Display Resolution 1280 x 720 (1Megapixels) Min. Illumination 0 Lux (With IR Illuminator) LensLens Type Glass Lens focal length f:2.8mmAperture F2.4 Angle of View Horizontal:70eDiagonal :75eVideo Image Compression H.264 Image Frame Rate 23fps(1280 x 720P), 25fps(VGA), 25fps(QVGA) Stream dual stream Image adjustment The hue, brightness, contrast, saturation, sharpness are adjustable Flip image flip and mirror Infrared mode Automatic or manual Pan/Tilt Angle Horizontal:300e & Vertical: 120eNight visibility 11pcs IR-LEDs, night vision range up to 8 metres Audio Input/Output Supports two-way audio Built-in Mic & Speaker Audio Compression PCM/G.726 Network Ethernet One 10/100Mbps RJ45 port Wireless Standard IEEE802.11b/g/n Data Rate IEEE802.11b: 11Mbps(Max.);IEEE802.11g: 54Mbps(Max.);IEEE802.11n: 150Mbps(Max.). Wireless Security WEP, WPA, WPA2 WPS Supports WPS one button push wireless connection Network Protocol IPǃTCPǃUDPǃHTTPǃHTTPSǃSMTPǃFTPǃDHCPǃDDNSǃUPnPǃRTSPǃWPS
98 98Remote Access P2P, DDNS SystemRequirements Operating System Microsoft Windows XP, Vista, 7, 8;Mac OSiOSǃAndroid Browser Microsoft IE8 and above version or compatible browser; Mozilla Firefox; Google Chrome; Apple Safari. Other Features Motion Detection Alarm via E-Mail, upload alarm snapshot to FTP User Accounts Three levels user role Firewall Supports IP Filtering Storage Micro SD card and local storage Alarm Alarm I/O interface Reset Reset button is available Power Power Supply DC 5V/2.0A Power Consumption 7.5 Watts (Max.) Physical Dimension(LxWxH) 110(L)*103(W)*127(H) mm Gross Weight 680g Net Weight 310g EnvironmentOperating Temperature -10e ~ 50eC (14eF ~ 122eF)Operating Humidity 20% ~ 85% non-condensing Storage Temperature -20eC ~ 60e (-4eF ~ 140eF)Storage Humidity 0% ~ 90% non-condensing Certification CE, FCC, RoHS ITEMS FC2503PZ Image Sensor Sensor High Definition Color CMOS Sensor Display Resolution 1280 x 960 Min. Illumination 0 Lux (With IR Illuminator) LensLens Type Glass Lens focal length f:3mm~10mmAperture F:1.8 Angle of View Horizontal:35e-100eDiagonal :45e-110eVideo Image Compression H.264 Image Frame Rate 30fps maxmium, downward adjustable Resolution 1280x960, 720P(1280 x 720), VGA(640 x 480), VGA(640 x 360), QVGA(320 x 240), QVGA(320 x 180) Stream dual streamImage adjustment The hue, brightness, contrast, saturation, sharpness are adjustable Flip image flip and mirror Infrared mode Automatic or manual
99 99Pan/Tilt Angle Horizontal:300° & Vertical: 100° Night visibility 17 pcs IR-LEDs, night vision range up to 8 metres AudioInput/Output Supports two-way audio Built-in Mic & Speaker 3.5mm audio jack for external Mic & Speaker Audio Compression PCM/G.726 Network Ethernet One 10/100Mbps RJ45 port Wireless Standard IEEE802.11b/g/n Data Rate IEEE802.11b: 11Mbps(Max.); IEEE802.11g: 54Mbps(Max.); IEEE802.11n: 150Mbps(Max.). Wireless Security WEP, WPA, WPA2 WPS Supports WPS one button push wireless connection Remote Access P2P, DDNS Network Protocol IP, TCP, UDP, HTTP, HTTPS, SMTP, FTP, DHCP, DDNS, UPnP, RTSP, WPS, ONVIF System Requirements Operating System Microsoft Windows 2000/XP, Vista, 7, 8; Mac OS iOSǃAndroid Browser Microsoft IE8 and above version or compatible browser; Mozilla Firefox; Google Chrome; Apple Safari. Other Features Motion Detection Alarm via E-Mail, upload alarm snapshot to FTP Privacy Zone Set privacy zone manually User Accounts Three levels user role Firewall Supports IP FilteringStorage Micro SD card and local storage Reset Reset button is available Power Power Supply DC 5V/2.0A Power Consumption 9.5 Watts (Max.) Physical Dimension(LxWxH) 116(L)x 103(W)x 122(H)mm Gross Weight 710g Net Weight 380g EnvironmentOperate Temper. -10° ~ 50°C (14°F ~ 122°F) Operating Humidity 20% ~ 85% non-condensing Storage Temper. -20°C ~ 60° (~4°F ~ 120°F) Storage Humidity 0% ~ 90% non-condensing Certification CE, FCC, RoHS Warranty Limited 2-year warranty
100100ITEMS FC2501PA/FC2501PImage Sensor Sensor High Definition Color CMOS Sensor Display Resolution 1.3M Pixels(1280*960˅ Min. Illumination 0 Lux (With IR Illuminator) Lens Lens Type M12 interface f 2.8mm F=1.8 focal length f 2.8mm Aperture F=1.8 Angle of View (horizontal) Horizontal:90eDiagonal :100eVideo Image Compression H.264 Image Frame Rate 30fps Resolution 960P˄1280x960˅ˈ720P(1280 x 720), VGA(640 x 480) & (640 x 360), QVGA(320 x 240) & (320 x 180) Stream dual stream Image adjustment The hue, brightness, contrast, saturation, sharpness are adjustable Flip image flip and mirror Infrared mode Automatic or manual Pan/Tilt Angle Horizontal:350° & Vertical: 120° Night visibility Invisible Infrared LEDs, Night Vision Range up to 8m Network Ethernet Yes Wi-Fi IEEE 802.11 b/g/n Frequency 2.412-2.462MHz EZlink Link to WiFi network easily WPS One button push wireless connection Network Protocol IPǃTCPǃUDPǃHTTPǃHTTPSǃSMTPǃFTPǃDHCPǃDDNSǃUPnPǃRTSPǃWPSSystemRequirements Operating System Windows XPǃWindows 7ǃWindows 8.1ǃMac OS Browser Microsoft IE8 and above version or compatible browser; Mozilla Firefox; Google Chrome; Apple Safari. Other Features Motion Detection Alarm via E-Mail, upload alarm snapshot to FTP Sound Detection PIR Detection Two-way Audio Supports Two-way Audio via Smartphone App or Web Client WiFi and System LEDs one system LED(Red), one wifi LED(Green)
101101 Privacy Block Set privacy area manually External Card Slot Micro-SD up to 32G User Accounts Three levels user role Firewall Supports IP Filtering Reset Reset button is available Power Power Supply DC 5V/2A Power Consumption <4.2 Watts Physical Dimension(LxWxH) 90(L)*90(W)*125(H)mm Net Weight 280g Environment Operating Temperature -10°C ~ 50°C (14°F ~ 122°F) Operating Humidity 10% ~ 80% non-condensing Storage Temperature -20°C ~ 60°C (-4°F ~ 140°F) Storage Humidity 0% ~ 90% non-condensing Certification CE, FCC, RoHS, WEEE Attention: Power adapter should be used between 0ć-40ć, and 5%-90% relative humidity. 6.4 CE & FCC Electromagnetic Compatibility (EMC) FCC Statement Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
102102—Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Navigation menu