Foshan Xode Electronics Technology X620 wireless barcode scanner User Manual

Foshan Xincode Electronics Technology Co., Ltd. wireless barcode scanner

Contents

User Manual

wireless barcode scannerX-620 User ManualV:1.0
PerformanceStrong decoding capabilityRugged housing designProprietary intellectual property Comfortable and convenient to use long life time button--3 million times long lasting lithium battery with 700mAhPacking list: 1*wireless barcode scanner; 1*user manual; wireless barcode scanner knowledgeWith the high-performance processor and decoder, it has a rapid decoding and high  precision  reading  ability.It  can  read  bar  codes  easily  on paper, products, etc. because of the high resistance to environmental interference. The scanning distance of it is much longer than other similar products. It has the advantages of fast speed, high accuracy and excellent reading performance.Housing Design Descriptionshock resistance covertrigger buttonindicator lightcable disassembly holeTo  pull  out  the  cable  from  the  scanner,  please  plug  in  the  clip  to  the  cable disassembly hole. The  scanner transfers data  to the computer  via the adapter. Please connect the adapter to the fixed computer USB interface. Do not plug in or  pull  out  the  adapter  frequently  in  order  to  help  improving  the  working efficiency and avoid man-made damage. First, connect the USB adapter to the computer.(No driver needed.)Second, place the cursor to where you want to enter the information or open a document in the computer, then use the barcode scanner to scan 1D barcodes. When the document shows the information, it reads successfully.Third,  connect  the  charging  cable  to  the  bottom  of  the  scanner  and  use  the computer  USB  interface  or  USB  adapter  to  charge.  The  charging  time  is  2 hours. After finishing charging, the scanner can work 10 hours continuously.How to UseWarning: 1. Please pull out the power supply and cable from the scanner in stormy weather to avoid damaging.2. Keep away from heat and maintain ventilation.3. Keep away from water in the environment of storage, transportation and operation.4. Please use the original USB adapter of the device.1The wireless barcode scanner has been set well before delivery. It can be used directly.  Please  do  not  scan  the  barcodes  in  the  manual  optionally  to  test the scanner.  In  case  of  scanning  the  setting  barcodes  and  abnormal  condition occurs, scan the 'initialization setting' barcode and 'serial mode' barcode in the manual.
Maintain  a  bevel  between  the  scanner  and  the  barcode  to  make  a  best reading.Do not keep the scanner in 90°with the barcode, otherwise the scanner can't read.The scanner must aim at the barcode and the beam must   cover the whole barcode. If don't, error maybe occur.Size: 168mm*73mm*93mmWeight: 300gCharging interface: RJ-45 plug, 2 meters (with 5V charger, red light for charging, green light for battery charged)Housing material: ABS+PCLight source: visible laser diode, wave length 650nmTrigger mode: manual (long press the button to turn off the scanner)Scanning mode: single line scanningScanning speed: 150±2 scans/secResolution: ≥3milError rate: 1/50millionScanning resolution: minimum 30% contrastTransmit frequency: 2.4GTransmit distance: 30 meters customized)Depth of scanning field: 5mm-630mmScanning angle: ±60°±65°±42°Decoding  capability:  international  standard  1D  barcodes  like  LIPC/EAN/JAN, UPC/EAN with Supplemental, LICC/EAN 128, Code 39, MSI, Code11, Codabar, (Reading Anglecorrect way of reading correct way of readingincorrect way of reading incorrect way of readingInitialization Setting Serial ModeTechnology ParametersPhysical ParametersPerformance ParametersElectrical ParametersCharging time: 2 hoursCharging voltage: DC5V±5%Power:100MW(operation),500MW (maximum)Currency:20MA(operation),100MA(maximum)Standby currency: <20uAEnvironmental ParametersLight intensity: 3000-12000LUXTemperature: 0℃-50 (operation mode);-40℃-60℃(storage)Package level: IP 52Shock resistance: design to fall from 2 meters height from concrete surface℃Scanning StandardCorrect Way of ScanningIncorrect Way of Scanning2 3Incorrect Way of Scanning
Wireless Barcode Scanner OperationPress the button. The scanner will beep two times and indicator light is on.Power OnPower OffPress the button for 5 seconds. The indicator light is off.LED Indicator& BeeperIndicator Light Color InstructionGreen light and will be off soon a short beep when readingsuccessfullyBeep Sound InstructionA short beep reading barcodes and the green lightwill be off soonA long beep low voltage and please connect thecharger to chargeDouble short beep turn on the scannerThree long beep fail to upload data and need to resetthe channel settingScanning Mode SetupSetup instruction:Normal  mode  means  real-time  transmission.  Scan  'Normal  Mode'  bar code,the scanner will be in real-time transmission.In inventory mode, the scanner will save the barcode it reads. When need to upload the data to computer, scan 'Data Upload' bar code.Scan 'Total Number of Data' bar code, the computer will show how many bar codes the scanner reads under inventory mode.Scan  'clear  data'  bar  code  means  clear  all  the  bar  codes  being  read  under inventory mode.Normal Mode Inventory ModeData Upload Total Number of DataClear DataTo set sleep time, first we need to scan 'sleep time' bar code.Second, scan the time you want to set.Sleep Time SettingPaired with the Adapter& User ID SettingsSleep Time 20 seconds30 seconds 60 seconds2 minutes 5 minutes10 minutes 20 minutesChannel SettingsIf the  scanner doesn't connect to the  computer (data will not be  uploaded to the computer), please do the following stepsChannel  settings  need  to  be  finished  within  10  seconds  after  connect  the adapter to the computer USB interface.Scan 'Channel Settings' bar codeScan  two  numeral  bar  codes  on  page  6.  For  example,  scan  '0'  a  nd  '1'  , channel number will be 01.The setting range of the channel number can only be 01-20.Channel Settings4 5
User ID SettingsFirst, scan 'ID settings' .Scan  two  numeral  bar  codes  below.  For  example,  scan  '0'  a  nd  '1'  ,  ID number will be 01. After finish setup, the ID number will be shown in front of all the barcodes read by the scanner. ID SettingsUser ID is set to be shown. If need to hide user ID, scan 'ID Hidden' . Scan 'ID Display' will show the User ID.ID Display ID Hidden0 12 345678 9Barcode SettingCode 11 /on Code 11/ offCode  11ID Character ‘m’ ID Character ‘z’Code 11redundancy enableCode 11redundancy disableCode  93Code 93 /on Code 93 /offID Character ‘h’ ID Character ‘z’Code 93redundancy enableCode 93redundancy disable67Shutdown/Default value/Version informationShutdown Software informationHardware information Default value
Code  39Code 39/on Code 39/offCode 39 ALL ASCI -onI Code 39 ALL ASCI -offIGuide character - None Guide character ‘+’Send start/stopCHARS - enableSend start/stopCHARS - disableID Character ‘a’ ID Character ‘z’Code 39redundancy enableCode 39redundancy disableCode  128 Interleaved/ITF25Code 128 /on Code 128/offID Character ‘g’ ID Character “z”Code 128redundancy enableCode 128redundancy disableCODABARCODABAR/on CODABAR/offSend start/stopCHARS - enableSend start/stopCHARS - disableID Character ‘k’ ID Character ‘z’CODABARredundancy enableCODABARredundancy disableBar width gapallowed- enableBar width gapallowed - disableInterleaved/ITF25-on Interleaved/ITF25-offID Character ‘I’ ID Character ‘z’8 9
ITF25 redundancy enable ITF25 redundancy disableIndustrial 25Industrial 25/on Industrial 25/offID Character ‘k’ ID Character ‘z’Industrial 25redundancy enableIndustrial 25redundancy disableMSI/PLESSEYMSI-on MSI-offID Character ‘f’ ID Character ‘z’MSI redundancy enable MSI redundancy disableUPC-AUPC-A/on UPC-A/offConvert UPC-Ainto EAN13 enableConvert UPC-Ainto EAN13 disableTransmit system bit enable Transmit system bit disableTransmit check digit enable Transmit check digit disableID Character ‘b’ ID Character ‘z’UPC-EUPC-E/on UPC-E/offConvert UPC-Einto UPC-A enableConvert UPC-Einto UPC-A disableTransmit system bit enable Transmit system bit disableTransmit check digit enable Transmit check digit disableID Character ‘C’ ID Character ‘z’10 11
EAN-13EAN-13/on EAN-13/offConvert EAN-13into ISBN enableConvert EAN-13into ISBN disableTransmit system bit enable Transmit system bit disableTransmit check digit enable Transmit check digit disableID Character ‘e’ ID Character ‘z’EAN-8EAN-8/on EAN-8/offTransmit system bit enable Transmit system bit disableTransmit check digit enable Transmit check digit disableID Character ‘d’ ID Character ‘z’ISBNISBN/on ISBN/offID Character ‘f’ ID Character ‘z’UPC/EANUPC/EANsupplements disableUPC/EANsupplements- 2 digitsUPC/EANsupplements- 5 digitsUPC/EANsupplements- 2&5 digitsUPC/EAN redundancy enable UPC/EAN redundancy disableCode  32CODE 32/on CODE 32/off12 13
Function SettingOutput ModeVersion NumberInitializationKeyboard wedgeSerialReading ModeSingle scan Single scan no triggerMultiscan Multiscan no triggerAuto continuous scanPulseEdit Setup BarcodesShow barcode typeHide barcode typeLower caseCapitalResetHide the first characterHide the last character14 15Language SettingAmerican English German FrenchItalian Russian  Spanish
Suffix SettingCancel suffixTermination CHAR- CRTermination CHAR- spaceTermination CHAR- TABTermination CHAR- TAB/CRTermination CHAR- CR+CRAll codes preamble- STXAll codes postamble- ETX16 17
18 19
20 21
22 23
24
FCC Caution:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.

Navigation menu