Flir BelgiumBA SMART Smart Controller and Autopilot radio interface User Manual 81243 1

Raymarine UK Ltd. Smart Controller and Autopilot radio interface 81243 1

Operations Manual

RaymarineSmartControllerUser Guide             Welcome to the SmartControllerHandbooks can be such daunting things, can’t they? Please don’t worry, we have made this guide as simple as possible.Your guide contains an explanation on how to use your SmartController, so finding your way around will become second nature.If all you want to do is power up and get going, that’s fine. But if you want to know more about what your SmartController will do for you, you’ll find it here.Document Number: 81243-1Date: December 2004D7609-181243_1.fm  Page 1  Wednesday, December 22, 2004  12:43 PM
2User Guide            ContentsSmartControllerD7610-181243_1.fm  Page 2  Wednesday, December 22, 2004  12:43 PM
User Guide 3Getting StartedHow do I power the unit on/off? ........................................... 7Keylock ................................................................................. 7Using your SmartControllerHow do I view instrument data? ........................................... 9How do I see all the available data? .................................... 10How do I use the autopilot? ................................................ 11How do I automatically steer straight?  ............................... 12How do I follow a route  from my GPS? ............................... 13How do I follow a circle pattern?  ........................................ 14How do I follow a zig-zag pattern?  ..................................... 15How do I follow a cloverleaf pattern? ................................. 16How do I steer to a fixed wind angle?  ................................. 17How do  I tack using the autopilot?  .................................... 18How do I dodge an obstacle? .............................................. 19Setting up your SmartControllerHow do I change a favourite page?  .................................... 21How do I change the page layout? ...................................... 22How do I change page content?  23How do I show or hide pages? ............................................ 24How do I change the pattern direction? .............................. 25How do I change my boat type?  ......................................... 26Alarms and TroubleshootingHow do I set up alarms?  ..................................................... 29SmartController Alarm messages  ....................................... 31Fault finding  ....................................................................... 33General maintenance ......................................................... 34Product Support .................................................................. 37Important Safety InformationIntended Use  ...................................................................... 42Declaration of Conformity  .................................................. 42EMC Guidelines .................................................................. 42Handbook Information  ....................................................... 4381243_1.fm  Page 3  Wednesday, December 22, 2004  12:43 PM
4User Guide            Getting    started . . .D7611-181243_1.fm  Page 4  Wednesday, December 22, 2004  12:43 PM
User Guide 5Battery power and signal strengthThe battery power (5 levels) are indicated on the left hand side of the display. Your SmartController will sound an alarm when battery power is running low.Wireless signal strength is shown similarly on the right hand side of the display.Charging the SmartControllerBefore using the SmartController for the first time, you will need to charge the unit. To charge the SmartController, simply place it into the cradle, pull open the rubber cover on the base  and connect the charging cable. CAUTION:  Do not use any other cable to charge the unit.The battery power indicator will flash during charging. The recommended charge time is approximately five hours. Once fully charged the battery indicator will stop flashing.The SmartController can also be charged whenever you wish without affecting performance.BatterypowerWirelesssignalstrengthD7666-1D7668-181243_1.fm  Page 5  Wednesday, December 22, 2004  12:43 PM
6User GuideYour SmartControllerPILOT  Use to activate the autopilot.C (POWER) Exit, cancel or back When off, press to power on the SmartControllerACTION Performs softkey functionUP/DOWN  Scroll through a list or a set of valuesNAVIGATE STARBOARDUse in PILOT mode to power steer your boat. Press and hold for Smart SteerSTANDBY  Use to return to manual control of your boat when in PILOT mode.Press and hold to access Pilot SetupMODE Press to select required pilot mode.SmartController display with power and battery strength indicatorsNAVIGATE PORT Use in PILOT modeto power steer your boat. Press andhold for Smart SteerD7612-181243_1.fm  Page 6  Wednesday, December 22, 2004  12:43 PM
User Guide 7How do I power the unit on/off?Power onPress and hold the C button. The handset will beep, the display will show the first instrument data page and you’re ready to go.Power offPress and hold the C button for 3 seconds. The display will countdown to zero and will then go blank. Note:  You cannot power off the handset when the autopilot is in control of your boat.KeylockWhen using your SmartController, you can temporarily lock the autopilot keys to ensure that it is not accidentally operated. Access to the instrument pages is unaffected by the keylock.How do I activate the keylock?Press and hold the mode button until you see the “KEYLOCK ACTIVE” message. A key symbol will also be displayed on the instrument data pages.Note:  You cannot activate keylock when the autopilot is in control of your boat.How do I turn off the keylock?Press mode followed by unlock. A “KEYLOCK OFF” message will be displayed.81243_1.fm  Page 7  Wednesday, December 22, 2004  12:43 PM
8User Guide            Using your    SmartControllerD7613-181243_1.fm  Page 8  Wednesday, December 22, 2004  12:43 PM
User Guide 9How do I view instrument data?Your SmartController can display up to 8 pages of boat information. Each page can be set to show 1,2 or 4 data items, or, to view information graphically. When the autopilot is enabled, an extra "P" page is added to the favourites, showing autopilot specific information.312From the main instrument display:1. Press the up/down key to move to the previous or next page.2.  The number of the page currently being displayed will be shown in the upper left hand corner.3. Press the MENU softkey to access SmartController settingsExample Screensview previous pageview next pageMENUDEPTH               4.7FTSPEED              11KTSMENUXTE        0.35NMBTW002ºDTW2.5NM2 Data items Graphcal data1  4If you only ever use a few favourite pages, usethe PAGE ON/OFF feature to turn off the rest.Quick TipD7614-181243_1.fm  Page 9  Wednesday, December 22, 2004  12:43 PM
10 User GuideHow do I see all the available data?You can display all the available SeaTalk data in a list for reference. This is particularly useful when checking the availability of data, or when wishing to see an infrequently used reading.SELECTSHOW ALL DATAScroll through data listMENU                ALL DATADEPTH    4.7  FTSPEED             11 KTSSOG              9.7  KTSVMG W  ---   KTSBACK 312When planning your favourite pages, use SHOWALL DATA to see what data will be shownQuick TipFrom the main instrument display:1.  Press the MENU softkey to display the main menu.2.  Using the up/down key, scroll to"SHOW ALL DATA" and press the SELECT softkey.3.  All of the available SeaTalk data will be displayed with its present value. Use the up/down key to scroll through the data.  Where the is no data present, "- - -" will be displayed.Example ScreenD7615-181243_1.fm  Page 10  Wednesday, December 22, 2004  12:43 PM
User Guide 11How do I use the autopilot?You can change your boat type in the autopilotsetup pagesQuick TipYour autopilot can steer your boat according to one of its preset modes. The modes that are available are dependant on your boat and autopilot type. Each of these are explained on the following pages.Available modesPOWER FISHING SAILAUTOAUTOAUTOZIGZAG*CIRCLE*CLOVER*TRACKTRACKTRACKWINDTACK*S1000 autopilots onlyD7616-181243_1.fm  Page 11  Wednesday, December 22, 2004  12:43 PM
12 User GuideHow do I automatically steer straight?312Quick TipFrom any screen:1.  Steer your boat onto the desired heading.2.  Check that there are no obstructions. 3. Press the PILOT key to activate the autopilot.PILOTActivates autopilot inAUTO modeSTANDBYReturns the boat tomanual steeringTo continue on your current heading under autopilot control, use the AUTO mode. This will steer you in a straight line ahead until commanded otherwise. AUTO mode can be used in conjunction with SMARTSTEER (see page 20) to give you remote, power-steering control of your boat.AUTO mode is also available for selection viathe MODE buttonAUTOD7617-181243_1.fm  Page 12  Wednesday, December 22, 2004  12:43 PM
User Guide 13How do I follow a route from my GPS?TRACKactivates autopilotin TRACK modepress repeatedly untilyou reach TRACK312Press when asked toaccept new heading.MODEPILOTPILOTPress when asked toaccept new heading.On arrival at each waypointYour autopilot can follow a route that you have previously set on your GPS or Chartplotter. Ensure that your GPS/Chartplotter is sending valid SeaTalk or NMEA 0183 data.From any screen:1. Press MODE repeatedly until TRACK is displayed.2. Press PILOT to activate TRACK mode.3.  If a valid route is received, the SmartController will tell you the direction in which it will turn the boat and the new heading it will steer to. Press PILOT to accept.Note:  At each waypoint, confirmation of turn will be required. Press PILOT to accept.PILOTD7618-181243_1.fm  Page 13  Wednesday, December 22, 2004  12:43 PM
14 User GuideHow do I follow a circle pattern?312Quick TipCIRCLEWhen you select CIRCLE mode, your current position is marked as the center of the circle pattern. Your autopilot will now gently steer your boat into the circle of the selected size.From any screen:1. Press MODE repeatedly until CIRCLE is displayed.2. Use the PORT and STARBOARD keys to change the size (S, M or L) if required3. Press the PILOT key to activate the autopilotchange pattern size(Sml, Med or Large)press repeatedly untilyou reach CIRCLEactivates autopilotin CIRCLE modeMODEPILOTIf your circles are gradually becoming larger, increasethe response setting and restart the circle pattern.D7612-181243_1.fm  Page 14  Wednesday, December 22, 2004  12:43 PM
User Guide 15How do I follow a zig-zag pattern?312Quick TipZIGZAGFrom any screen:1. Press MODE repeatedly until ZIGZAG is displayed.2. Use the PORT and STARBOARD keys to change the size (S, M or L) if required3. Press the PILOT key to activate the autopilotchange pattern size(Sml, Med or Large)press repeatedly untilyou reach ZIGZAGactivates autopilotin ZIG ZAG modeMODEPILOTWhen you enter ZIGZAG mode, the autopilot will use your current position and heading as the center line of the zig-zag. The autopilot will now gently steer your boat into the pattern starting with a turn to starboard.Fishing patterns are designed to work at speeds up to 15kts. Check your speed before starting.D7621-181243_1.fm  Page 15  Wednesday, December 22, 2004  12:43 PM
16 User GuideHow do I follow a cloverleaf pattern?Quick TipWhen you enter CLOVERLEAF mode, the autopilot will use your current position as the center point. The autopilot will then steer your boat through a series of starboard turns, repeatedly intersecting the start point.CLOVERLEAFchange pattern size(Sml, Med or Large)press repeatedly untilyou reach CLOVERLEAF312activates autopilotin CLOVERLEAF modeMODEPILOTFrom any screen:1. Press MODE repeatedly until CLOVERLEAF is displayed.2. Use the PORT and STARBOARD keys to change the size (S, M or L) if required3. Press the PILOT key to activate the autopilotYou can change the pattern direction in PILOT SETUP (See section 3) D7622-181243_1.fm  Page 16  Wednesday, December 22, 2004  12:43 PM
User Guide 17How do I steer to a fixed wind angle?312WINDMODEPILOTpress repeatedly untilyou reach WINDactivates autopilot inWIND mode and showscurrent wind angle.adjusts the desiredwind angleIf your boat is equipped with a wind transducer, you can set the autopilot to steer at a fixed angle to the wind, WIND mode. You can adjust this angle to suit your needs.WINDFrom any screen:1. Press MODE repeatedly until WIND is displayed.2. Press PILOT to activate WIND mode.3.  The current wind angle will be displayed. Use the PORT and STARBOARD keys to change the angle as required.Quick Tip For best results when heading upwind, sail slightlyfreer of the wind than if you were hand steering.D7623-181243_1.fm  Page 17  Wednesday, December 22, 2004  12:43 PM
18 User GuideHow do I tack using the autopilot?When in WIND mode you can use the autopilot to execute a tack maneuver. The degree of turn is set by the autopilot (Refer to the handbook supplied with the autopilot for details on changing the tack angle)TACK312MODEPILOTWINDFrom any screen:1. Press MODE repeatedly until TACK is displayed.2. Use the PORT and STARBOARD keys to select the TACK direction.3. Press PILOT to accept.press repeatedly untilyou reach TACKpress to start theTACK maneuverselect the desiredtack directionD7624-181243_1.fm  Page 18  Wednesday, December 22, 2004  12:43 PM
User Guide 19How do I dodge an obstacle?312Quick Tip When used with SMARTSTEER enabled autopilots, thepress-and-hold command will activate SMARTSTEEREven when the autopilot is activated, you are are still able to override it. If, for example, you encounter an obstacle, or you just wish to change direction by a few degrees. This allows you to effectively power-steer your boat.With the autopilot activated:1.  A brief press of the PORT or STARBOARD key will make a 1º course change in that direction. Use this method for course changes up to 20º2.  A press and hold of the PORT or STARBOARD key will execute a 10º turn in that direction.3.  The autopilot will resume on the new heading.1ºDodgeWith the autopilot activated:1º course change10º course changepresspress and holdreturns the boatto manual steeringororSTANDBYD7625-110º81243_1.fm  Page 19  Wednesday, December 22, 2004  12:43 PM
20 User Guide                Setting upyour SmartControllerD7626-181243_1.fm  Page 20  Wednesday, December 22, 2004  12:43 PM
User Guide 21How do I change a favourite page?Quick Tip312SELECTSELECTCHANGE PAGES(Select page to change)MENUYou can change the appearance, content and layout of up to 8 favourite data pages. Set these up to best suit your boating needsWhen viewing a favourite page, Press and hold theMENU button to change the content for that pageThe selected favourite page can now be configured:From the main instrument display:1.  Press the MENU softkey to display the main menu.2.  Using the up/down key, scroll to"CHANGE PAGES" and press the SELECT softkey.3.  Using the up/down key, scroll to the page you wish to change and press the SELECT softkey.D7627-1ACCEPT CHANGECONTENTLAYOUTPAGE OFF     PAGE 181243_1.fm  Page 21  Wednesday, December 22, 2004  12:43 PM
22 User GuideHow do I change the page layout?312Quick TipThe selected favourite page can now be configured:You can change the layout of each favourite page.If you only ever use a few favourite pages, usethe PAGE ON/OFF feature to turn off the rest.1121234CHANGELAYOUTFrom the change page screenselects the next available layout(see options below)When desired format selected:ACCEPTFrom the change page screen:1.  Using the up/down key, scroll to"LAYOUT".2.  Press the CHANGE softkey to scroll through the layout options. The icon to the left reflects the selected option.3.  Press the ACCEPT softkey to use the selected layout for this page.MENUXTE        0.35NMBTW002ºDTW2.5NMD7628-1ACCEPT CHANGECONTENTLAYOUTPAGE OFF     PAG E 181243_1.fm  Page 22  Wednesday, December 22, 2004  12:43 PM
User Guide 23How do I change page content?Quick Tip312ACCEPTCONTENTYou can change the content of each favourite  page.If you only ever use a few favourite pages, usethe PAGE ON/OFF feature to turn off the rest.From the change page screen:data element selectiondata type selectionWhen desired data selected:ACCEPT DATA DEPTH   4.7FTSPEED   11KTSHEADING 227MAWS   2.3KTSExample screen:From the change page screen:1.  Using the up/down key, scroll to"CONTENT" and press the CHANGE softkey. The current data type(s) will be displayed.2.  The selected data element will be shown with a black background. Where you have more than one piece of data displayed, use the softkey to select the data element you wish to change.3.  Use the up/down control to scroll through the available data types for your current selection. When complete, press the ACCEPT softkey to save your changes and return to the change page screen.D7629-181243_1.fm  Page 23  Wednesday, December 22, 2004  12:43 PM
24 User GuideHow do I show or hide pages?312Quick Tip If you only need to show a few items of data thenuse a larger display size to make it stand outUse as many or as few data pages as you like The page on/off option allows you to only display those data pages you really want to see.Example screen:ACCEPT CHANGECONTENTLAYOUTPAGE OFF     PAGE 1PAGE ON/OFFFrom the change page screen:CHANGEToggles Page On/OffFrom the change page screen:1.  Using the up/down key, scroll to"PAGE ON" or "PAGE OFF"2.  The label displayed indicated the current status of the selected page. This will also be represented graphically in the icon. 3.  Press the CHANGE softkey to toggle the setting from ON to OFF and vice-versa.D7630-181243_1.fm  Page 24  Wednesday, December 22, 2004  12:43 PM
User Guide 25How do I change the pattern direction?Quick Tip312SELECTPILOT SETTINGSPATTERNMENUYou can change the autopilot pattern direction.SETtoggles betweenclockwise andanti-clockwiseExample screen:Turns to starboard (clockwise) is the defaultpattern direction.From the main instrument display:1.  Press the MENU softkey to display the main menu.2.  Using the up/down key, scroll to"PILOT SETTINGS" and press the SELECT softkey.3.  Use the up/down key to scroll down to the "PATTERN" option and press SET to switch between CLOCKWISE and ANTI-CLOCKWISE patterns. When you are done, press BACK to return to the main menu.D7631-1AUTOLEARN   STARTBOAT TYPE  FISHINGPILOT ENABLEDSETTINGS CHANGEPATTERN CLOCKWISEBACK PILOT SETTINGSSET81243_1.fm  Page 25  Wednesday, December 22, 2004  12:43 PM
26 User GuideHow do I change my boat type? 312Quick Tip If you own a powerboat and still require windinformation, set the boat type to SAILExample screen:SELECTPILOT SETTINGSBOAT TYPEMENUSETtoggles betweenPOWER, FISHING, SAILYour SmartController can be set to suit the type of vessel to which it is fitted. This ensures that the user interface will offer you the most relevant features. AUTOLEARN   STARTBOAT TYPE  FISHINGPILOT ENABLEDSETTINGS CHANGEPATTERN CLOCKWISEBACK PILOT SETTINGSSETD7632-1From the main instrument display:1.  Press the MENU softkey to display the main menu.2.  Using the up/down key, scroll to"PILOT SETTINGS" and press the SELECT softkey.3.  Use the up/down key to scroll down to the "BOAT TYPE" option and press SET to switch between POWER, FISHING and SAIL types. When you are done, press BACK to return to the main menu.81243_1.fm  Page 26  Wednesday, December 22, 2004  12:43 PM
User Guide 27How do I adjust the handset settings?312Quick Tip To extend battery life, set the backlight to thelowest acceptable level for your needsExample screen:SELECTUSER SETTINGS(User Setting)MENUSET(to adjust)Your SmartController can be set to display information appropriate to your current location, in the format you require. The User Settings menu allows you to set this up.  HEADING   MAGDATE USTIME 24 HRTIME OFFSET  -5.0HBACKLIGHT 10SCONTRAST 12BACKUSER SETTINGSSETD7632-1From the main instrument display:1.  Press the MENU softkey to display the main menu and using the up/down key, scroll to"USER SETTINGS" and press the SELECT softkey.2.  Use the up/down key to scroll to the item you wish to change.  Press SET to adjust a user setting value.3.   When you are done, press BACK to return to the main menu.81243_1.fm  Page 27  Wednesday, December 22, 2004  12:43 PM
28 User Guide            Alarms and    TroubleshootingD7633-181243_1.fm  Page 28  Wednesday, December 22, 2004  12:43 PM
User Guide 29How do I set up alarms?Quick Tip312SELECTSELECTALARMS(Select alarmto configure)MENUYou can configure which alarms to you want the SmartController to report. Wind alarms are only visible when the boat type isset to SAIL.From the main instrument display:1.  Press the MENU softkey to display the main menu.2.  Using the up/down key, scroll to"ALARMS" and press the SELECT softkey.3.  Using the up/down key, scroll to the alarm you wish to change and press the SELECT softkey.DEPTHWP ARRIVALLOST FIXPILOTHIGH WINDLOW WINDBACK ALARMSSELECTLOCALSYSTEMSYSTEMSYSTEMOFFOFFExample ScreenD7634-181243_1.fm  Page 29  Wednesday, December 22, 2004  12:43 PM
30 User GuideHow do I set up local and system alarms?Quick Tip312adjusts localalarm thresholdfor LOCAL alarmsCHANGEWhere applicable, local alarm threshold values can also be set independantly of the ships systemWind alarms are only visible when the boat type isset to SAIL.From the main instrument display:1.  Press the CHANGE softkey to select the type of alarm top be reported.2.  SYSTEM - alarms with the ship's system LOCAL - alarms to a value set on the handheld OFF - Alarm not reported3.  For LOCAL alarms, use the up/down key to adjust the alarm threshold value.DEPTHLOCAL ALARM        9.4      FTBACK   -/+ALARMSSELECTExample ScreenD7635-181243_1.fm  Page 30  Wednesday, December 22, 2004  12:43 PM
User Guide 31SmartController Alarm messagesWhen the SmartController detects a fault or failure on the system, it will activate one of the alarm messages listed in the following table. Unless otherwise stated, you should respond to the alarm by pressing standby to clear the alarm and return to manual control, before you attempt to resolve the problem. In some situations, the SmartController will raise more than one alarm. When you have dealt with the first alarm, it will display the next alarm.            ALARM MESSAGE POSSIBLE CAUSE and SOLUTIONCHECK PILOT See the main autopilot display head for infor-mation on this  alarm.CURRENT LIMIT Serious drive failure – the drive is taking too much current due to short-circuit or jamming. Check the drive unit.DRIVE STOPPED The autopilot is unable to turn the rudder (this occurs if the weather load on helm is too high, or if the rudder position sensor has passed beyond the preset rudder limits or rudder end-stops).Check drive and rudder position sensor.LARGE XTE This alarm will sound when you are more than 0.3nm from your planned track. The alarm will also state  if you are to the PORT or STARBOARD of the track,LRN FAIL 1, 2 or 4 AutoLearn not completed successfully. Failure codes:1 = AutoLearn has not been carried out2 = AutoLearn failed, usually due to manual interruption 4 = AutoLearn failed, probably due to drive or compass failureRepeat the AutoLearn procedure. 81243_1.fm  Page 31  Wednesday, December 22, 2004  12:43 PM
32 User GuideMOT POW SWAPPED Motor cables are connected to power terminals (and power cables are connected to motor ter-minals) at course computer. Turn off power and swap over connections.NO DATA The autopilot is in Track mode and:• the autopilot is not receiving SeaTalk naviga-tion data, or • your GPS is receiving a low strength signal, this will clear when the signal improvesNote: The autopilot stops adjusting the heading as soon as it loses data.NO GPS COG The autopilot is not receiving valid COG data from your GPS system. Check the connections and that your GPS unit is setup to send out COG data.NO GPS FIX Your GPS is receiving a low strength signal, this will clear when the signal improvesNO PILOT The controller is not receiving data from the autopilot. Check connections and check course computer is switched on.OFFCOURSE This alarm sounds if you have been off course from the locked heading for more than 20 sec-onds. It also states if you are to the PORT or STARBOARD of the intended heading.RG FAIL GyroPlus yaw sensor has failed. Call a Rayma-rine service agent.ROUTE COMPLETE This sounds on the completion of a track. Press PILOT to continue on the same heading or STANDBY for manual control.SHIPS BATTERY The ships battery voltage has dropped below acceptable limits, replace the batteries.WAYPOINT ADVANCE You have arrived at a waypoint on your route. The autopilot is now requestiong permission to turn onto the next leg, press PILOT to accept.ALARM MESSAGE POSSIBLE CAUSE and SOLUTION81243_1.fm  Page 32  Wednesday, December 22, 2004  12:43 PM
User Guide 33Fault findingAll Raymarine products are designed to provide many years of trouble-free operation. We also put them through comprehensive testing and quality assurance procedures before shipping.If a fault occurs with your SmartController, use the fault finding tables in this section to help identify the problem and provide a solution. If you cannot resolve the problem yourself, refer to the product support information.             SYMPTOM POSSIBLE CAUSE and SOLUTIONDisplay is blank No power – press C to power up the SmartCon-troller or charge the batteries.Autopilot not responding. Drive the boat for 30 seconds at above 2.5kts and retry.Check autopilot connections.Boat turns slowly and takes a long time to come onto courseRudder gain too low. Complete AutoLearn or increase gain setting.Boat overshoots when turning onto a new courseRudder gain too high. Complete AutoLearn or decrease gain setting.Position information not receivedNavigator not transmitting the correct position data.The pilot will not auto advance to the next waypoint.No bearing to waypoint information received from the navigator.81243_1.fm  Page 33  Wednesday, December 22, 2004  12:43 PM
34 User GuideGeneral maintenanceRoutine checksThe SmartController does NOT contain any user-serviceable parts. If you remove the main cover you will invalidate the warranty.  It should be serviced only by authorized Raymarine service technician. As a result, user maintenance is limited to the following checks• make sure all cable connectors are firmly attached• examine for signs of wear or damage – replace any damaged cablesCleaning the SmartControllerTake care when cleaning the display. Avoid wiping the display screen with a dry cloth as this could scratch the screen coating. If necessary, only use a mild detergent.Never use chemical or abrasive materials to clean the controller. If it is dirty, wipe it with a clean, damp cloth.Dealer Maintenance ProceduresThis section includes procedures that have a significant impact on autopilot operation and can affect your boat’s safety. You will not need to follow these procedures in normal operation. We therefore recommend that these are only performed by authorised service personnel.Accessing the dealer calibration area.From the MAIN MENU mode, press and hold SELECT for 5 seconds until the dealer calibration screen is displayed:Use the up/down key to scroll through the various calibration options.VERSIONSELF TESTDIAGNOSTICREGISTRATIONRESETBACK DEALERSELECTD7669-181243_1.fm  Page 34  Wednesday, December 22, 2004  12:43 PM
User Guide 35Hardware and Software version numbersUse this option to display the current hardware revision and the software version numbers for the SmartController. At VERSION, press the SELECT key to display the information.Self testPress SELECT to start the unit test sequence and then follow the on-screen instructions. This will test the display, buzzer and button functions.DiagnosticsPress PILOT to display the the status of the wireless link.Handset RegistrationRaymarine wireless systems require each wireless controller to be  “registered” to a basestation. This registration process is to prevent unauthorised control of your boat by another wireless user. Note:  There may be instances where you want to move your controller to another boat and use it with another system. In this case, you will need to de-register from the current system and register with the new system. You can do this using the REGISTRATION function.Note:  For best results always perform registration and de-registration with the handset close to the basestation. To register a handsetAt REGISTRATION, press SELECT.If the SmartController is not registered, then the display will read HANDSET NOT REGISTERED. Press REG to start the registration process. CANCEL REGHANDSETNOTREGISTEREDDD7677-181243_1.fm  Page 35  Wednesday, December 22, 2004  12:43 PM
36 User Guide The SmartController will now search for the basestation, you can press EXIT at any time to stop the search. When a basestation is found by the SmartController, check that the yellow registration light on the basestation is on. This ensures that the handset and basestation are matched correctly.If the yellow light is on,  press ACCEPT to complete the registration, the display will read REGISTER SUCCESSFUL. Otherwise, press REJECT and re-start the registration procedureTo de-register a handsetAt REGISTRATION, press SELECT. If the SmartController is already registered, then the display will read REGISTERED TO BASESTATION.  Press DEREG to continue, or EXIT to cancel the operation.The SmartController will attempt to commuicate with the basestation and de-register. When complete, the display will read HANDSET NOT REGISTERED.If the SmartController cannot communicate with the basestation then a “BASE NOT FOUND” message will be displayed. It is still possible to de-register the SmartController at this point by pressing  SELECT. To leave without de-registering, press EXIT.Factory ResetThis option will clear all settings from the SmartController. Press and hold the SELECT key for 2 seconds to activate the reset.EXIT STARTREGISTERHANDSETCHECKBASESTATIONIS POWERED OND7671-1REJECT ACCEPTFOUNDBASESTATIONCHECKLAMPD7672-1EXIT DEREGREGISTEREDTOBASESTATIONREADY TO USED7670-181243_1.fm  Page 36  Wednesday, December 22, 2004  12:43 PM
User Guide 37Note:  A reset does not alter the registration status of the SmartControllerProduct SupportRaymarine products are supported by a worldwide network of distributors and Authorized Service Representatives. If you encounter any difficulties with this product, please contact either your national distributor, service representative, or the Raymarine Technical Services Call Center. Refer to the back cover or www.raymarine.com for contact details. If you cannot trace or rectify the fault, contact your nearest Raymarine dealer or Service Center, specifying:The SmartController serial numbers:• the controller serial number is printed on its rear cover• the controller software version numbers81243_1.fm  Page 37  Wednesday, December 22, 2004  12:43 PM
38 User Guide            Important Safety    InformationD7636-181243_1.fm  Page 38  Wednesday, December 22, 2004  12:43 PM
User Guide 39Safety NoticesProduct installationThis equipment must be installed and operated in accordance with the instructions contained in this handbook. Failure to do so could result in poor product performance, personal injury and/or damage to your boat. Before installing the SmartController and basestation, check that they are the correct voltage for your boat’s supply. As correct performance of the boat’s steering is critical for safety, we STRONGLY RECOMMEND that an Authorized Raymarine Service Representative fits this product. WARNING:  Electrical safetyMake sure the power supply is switched off before you make any electrical connections. WARNING:  CalibrationWe supply this product calibrated to default settings that should provide initial stable performance for most boats. To ensure optimum performance on your boat, you must complete the AutoLearn procedure as described in your autopilot handbook.WARNING:  Navigation aidAlthough we have designed this product to be accurate and reliable, many factors can affect its performance. As a result, it should only be used as an aid to navigation and should never replace common sense and navigational judgement. Always maintain a permanent watch so you can respond to situations as they develop. 81243_1.fm  Page 39  Wednesday, December 22, 2004  12:43 PM
40 User GuideWARNING:  Autopilot controllerIf the wireless controller is your only method of operating the autopilot, ensure that your system includes a readily accessible method of switching off the autopilot power supply.Your SmartController will add a new dimension to your boating enjoyment. However, it is the skipper’s responsibility to ensure the safety of the boat at all times by following these basic rules:• Ensure that someone is present at the helm AT ALL TIMES, to take manual control in an emergency.• Make sure that all members of crew know how to disengage the autopilot.• Regularly check for other boats and any obstacles to navigation – no matter how clear the sea may appear, a dangerous situation can develop rapidly.• Maintain an accurate record of the boat’s position by using either a navigation aid or visual bearings.• Maintain a continuous plot of your boat’s position on a current chart. Ensure that the locked autopilot heading will steer the boat clear of all obstacles. Make proper allowance for tidal set – the autopilot cannot.• Even when your autopilot is locked onto the desired track using a navigation aid, always maintain a log and make regular positional plots. Navigation signals can produce significant errors under some circumstances and the autopilot will not be able to detect these errors.General Care and SafetyDo not leave the controller in places where the temperature could exceed 60ºC (140ºF).Do not attempt to dismantle the SmartController or any of its accessories.81243_1.fm  Page 40  Wednesday, December 22, 2004  12:43 PM
User Guide 41Only use with the lanyard supplied with your SmartController or a spare supplied by Raymarine.Switch off your SmartController system at a refuelling point, even if you are not refuelling your own vessel.The operation of some medical electronic devices such as hearing aids and pacemakers, may be affected if a controller is used next to them. Observe the manufacturers recommendations for such devices.Radio frequency energyYour SmartController and base station both low- power radio transmitters and receivers. When they are turned on, they intermittently receive and transmit radio frequency (RF) energy (radio waves). Exposure to radio frequency energyThe SmartController is designed not to exceed the limits for exposure to RF energy set by national authorities and international health agencies These limits establish permitted levels of radio wave exposure for the general population. An example of a radio frequency exposure guideline and standard that the SmartController is designed to conform to is :BS EN 50371:2002 - Generic standard to demonstrate the compliance of low-power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields.FCC InformationThese devices comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) these devices may not cause harmful interference and (2) these devices must accept interference received, including interference that may cause undesired operation.Changes or modifications to this equipment not expressly approved in writing by Raymarine could violate compliance with FCC rules and void the user's authority to operate the equipment.81243_1.fm  Page 41  Wednesday, December 22, 2004  12:43 PM
42 User GuideDisposalDisposal of this product, at the end of its useful life, should be in accordance with local regulations. Do not incinerate or mutilate the integral battery pack.Intended UseThe Smart Controller and Base Station are part of a Raymarine autopilot and instrumentation system intended for use on leisure vessels and small workboatsDeclaration of ConformityHereby Raymarine UK Ltd, declare that the SmartController and Basestation are in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/ECThe original Declaration of Conformity certificate may be viewed on the relevant product page at www.raymarine.comEMC GuidelinesAll Raymarine equipment and accessories are designed to the best industry standards for use in the recreational marine environment. Their design and manufacture conforms to the appropriate Electromagnetic Compatibility (EMC) standards, but correct installation is required to ensure that performance is not compromised. Connections to other equipmentIf your Raymarine equipment is to be connected to other equipment using a cable not supplied by Raymarine, a suppression ferrite MUST always be attached to the cable near to the Raymarine unit.81243_1.fm  Page 42  Wednesday, December 22, 2004  12:43 PM
User Guide 43Handbook InformationTo the best of our knowledge, the information in this handbook was correct when it went to press. However, Raymarine cannot accept liability for any inaccuracies or omissions it may contain. In addition, our policy of continuous product improvement may change specifications without notice. As a result, Raymarine cannot accept liability for any differences between the product and the handbook. SeaTalk® is a Registered Trademark of RaymarineAll other trademarks used in this document are acknowledged.© Copyright Raymarine UK Limited 200481243_1.fm  Page 43  Wednesday, December 22, 2004  12:43 PM
44 User Guide81243_1.fm  Page 44  Wednesday, December 22, 2004  12:43 PM

Navigation menu