Flir BelgiumBA DP4KW Light Marine Navigational Radar User Manual E Series Networked Display Ref Manual Part 5

Raymarine UK Ltd. Light Marine Navigational Radar E Series Networked Display Ref Manual Part 5

E Series Guide Part 5

Note: PRESENTATIOND6897-2RANGE RINGSOFF ONToggle as requiredPRESENTATIOND6898-2EBL REFERENCEM/T RELToggle as requiredGAIND8406_1SEAHBRPress to highlight Toggle to manual (MAN)TUNEGAINAUTO MANAUTOSEAMANTUNEGAINAdjustlevel as requiredMANMAN50
Note:
Note:
Note: Note: D8414_1MENUSetupGPS Status...Compass Setup...Highlight Radar SetupSelect Radar Setup Radar Setup...Select NORMAL or HIGH Select Interference Reject Radar Setup MenuInterference Reject NORMALTarget Expansion LOWWakes Period 1 minOKENHANCEECHOES...INT REJECTON OFFD8416_1Press and holdENHANCEECHOES...D8417_1EXPANSIONON OFFSelect HIGH D8419_1Radar Setup MenuEnter Target Expansion optionSelect Target Expansion Interference Reject NORMALTarget Expansion HIGHWakes Period 1 min OKPress and holdENHANCEECHOES...D8417_1EXPANSIONON OFFD8420_1Radar Setup MenuInterference Reject NORMALTarget Expansion LOWWakes Period 1 min OKSelect HIGH Enter Target Expansion optionSelect Target Expansion
Note: Note: ENHANCEECHOES...WAKESD8421_1ONToggle to ONRadar Setup MenuInterference Reject NORMALTarget Expansion LOWWakes Period 1 minOKD8422_1Select Wakes PeriodSelect wakes periodHighlight Wakes Period MENUHighlight Radar SetupSelect Radar Setup SetupRadar Setup...GPS Status...Compass Setup...System Setup...ENHANCEECHOES...D8423_1CLEAR WAKES
Note: D6585-2RANGEINOUTD7578-3CHART MODE ANDORIENTATION…CHART SYNCPRESENTATION… RDR
Note: Range - 1/4 nmRange rings - 1/8 nm apartRange - 3/4 nmRange rings - 1/4 nm apartRange - 11/2 nmRange rings - 1/4 nm apartD8407_1e.g.Bearing and range from your vessel to cursorD8402_1Cursor
Note: Note: D8408_1VRMD8425_1EBLD8403_1EBLVRM Target
Note: VRM/EBL...D8404_1Toggle to ONAdjust VRM highlightedVRM/EBL 1OND8405_1Adjust VRM to required sizeADJUST VRM0.838nmDistance from your boat to VRM displayed on soft key.D8427_1Adjust EBL to required angleAngle to starboard/ port displayed on soft key.ADJUST EBLxxx0ADJUST EBL410POKSET UP VRM/EBL2D8428_1Toggle to ONAdjust VRM highlightedVRM/EBL 2ON OFF
Position cursor over VRM/EBLVRM/EBLOr:D8429_1Soft key highlighted VRM/EBL highlightedCursor centeredFLOATING EBL... ADJUST FLOATVRM/EBL...Move VRM over 2nd target Range between 1st & 2nd target on soft keyADJUST VRMxxxnmADJUST VRM2.6nmDefine first point:Define second point:D8430_1Move VRM/EBL center over first target To save and removehighlightOKTo access soft keysOK
D8431_1Bearing between 1st & 2nd target on soft keyADJUST VRM1900Move EBL over 2nd target ADJUST EBLxxx0To save & removehighlightOKD8432_1To unfloat VRM/EBL 1:FLOATING EBL... CENTEROKTo unfloat VRM/EBL 2:FLOATING EBL... CENTERSET UP VRM/EBL2OK
MONITOR INZONES...TARGETTRACKINGD6834-2ZONE 1SET UP ZONE 1D8433_1ONZONE 2 SET UP ZONE 2ONToggle to ONOr6nm Head-Up Relative Motion Rings 1nmD6815_3SectorGuard Zone
D9104_1ZONE SHAPESECTOR SET INNERxx.xx nmPress to highlight Set inner limit for guard zoneOKRepeat forother settings6nm Head-UpD6832-2CircularGuard ZoneD6761_3ZONE SHAPECIRCLESET INNERxx.xx nmPress to highlight Set inner limit for guard zoneOKRepeat forother settings
D6811_2MARPA LIST...TARGETTRACKINGID Bearing Range TrueCourseTrueSpeed CPA TCPA022oT025oT0.000nm0.000nm180oT180oT0.0kts0.0kts0.000nm0.000nm00h00m00s00h00m00sMARPA LIST12D7542_2Dangerous targetSafe targetTarget being acquiredLost target
MARPA targetsD6810_4D9008_1VectorCPA graphic3 9D9009_1CPA GRAPHICCPA GRAPHICCPA GRAPHIC1810T17.1 ktMove cursor over targetONOFFAUTOON - The CPA graphic will be displayed for as long as the target is being tracked.OFF - No CPA graphic is shown.AUTO - When you place the cursor over any part of a MARPA symbol, the CPA graphic is displayed. This is the default setting.
D6600-2TARGETTRACKING...MARPA & AISOPTIONS... Select required levelMARPA OPTIONS...Enter highlighted parameterHighlight required parameterTARGET HISTORY OffOWN VESSEL SAFE ZONE 0.5nmTIME TO SAFE ZONE 3minSAFE ZONE RING HIDDENVECTOR LENGTH6min
Note: D6829-2TARGETTRACKING...Move cursor over target to be acquiredTargetD8806-1ACQUIRE TARGET 'Target being acquired' symbol displayed If target present for several scans, the radar will lock onto it and change the symbol to 'Safe'D8434_1CANCEL ALLTARGETS CANCEL TARGET Move cursor over target to be cancelledCancelling an individual target Cancelling all targetsMove cursor over target to be cancelledD8436_1MARPA LIST...TARGETTRACKING...
D8435_1CANCEL TARGETTo cancel an individual target:MARPA LIST...ID Bearing Range Course Speed CPA TCPA2 1870T 4.0nm 1300T 1.5kt 4.0nm 8min1 1370T 1.4nm 1800T 2.2kt 1.4nm 2minHighlight target to be cancelledCANCEL ALLTARGETSTo cancel all targets:OKOKD9024_1PRESENTATION AIS LAYERON
D8437_1MENUHighlight Radar Setup menuEnter Radar Setup menuRadar Setup MenuActive Scanner 2kw RadomeInterference Reject NORMALTarget Expansion LOWWakes Period 1minTimed Transmit OFFTransmit Period 10 SCANS Standby Period 3 MINSSea Clutter Curve...Antenna Size RadomeBearing AlignmentRadar Advanced Setup...SetupRadar Setup...GPS Status...Compass Setup...System Setup...
Note: D8438_1MENUHighlight Alarm Setup menuEnter Alarm Setup menuHighlight appropriate sub-menuEnter sub-menuAlarm Setup MenuSystem Alarms Setup...Navigation Alarms Setup...Fishfinder Alarms Setup...Radar Alarms Setup...SetupRadar Setup...GPS Status...Compass Setup...System Setup...Alarm Setup...
.Note: Radar Setup > Select ScannerScanner Setup > Dual RangeColor PaletteEBL Reference TuneTimed Transmit Sea Clutter CurveTransmit Period Parking OffsetStandby Period Scanner SizeBearing AlignmentRadar Advanced SetupMENUD10609_1
Note: Notes: (1) When an open array antenna is fitted, the system stops the antenna in the forward facing position when Standby mode is selected.(2) Dual radar support will only allow one radar to be active at any one time. You cannot set up two radar windows, each using a different scanner.SCANNERRADAROFFSCANNERONTXSelect required operating modeSwitch scanner ON or OFFD8397_1
D7440-1(Rotating icon)D6894-2(static icon)D7441-1(grayed-out icon)D7442-1(rotating/static icon)a1a2EarthhHCliffRadarD1643-3RmaxRmax = 2.23 ( h + H )RmaxhHmaximum radar rangeradar antenna heighttarget heightin nautical milesin metresin metresRmax = radar horizon of antenna (a1) + radar horizon of target (a2)
True echo Side echoesMain lobeAntennaArcSidelobeSidelobeD1638-4
False echo PassingshipTrue echo D1641-4True echo False echo Mastor funnelD1642-3True echoMultiple echoes
D3968-4D3967-4
Ship's Heading Market (SHM) (indicating the boat's current heading) is upwardsAs your boat's heading changes: SHM fixed upwards Radar picture rotates accordinglyNNe.g:D8398_1Ne.g:True north at topND8399_1As your boat's heading changes: Radar picture fixed (north up) SHM rotates accordingly
Current course upwardsNND8400_1As your boat's heading changes: Radar picture fixed SHM rotates accordinglye.g:
D6842-20 offset 2/3 offset1/3 offset
Note:
Note:

Navigation menu