Fihonest Communication JS-BTM256 BLUETOOTH MODULE User Manual Fihonest JS BTM256 Instruction Manual 20140410

Fihonest Communication Co.,Ltd. BLUETOOTH MODULE Fihonest JS BTM256 Instruction Manual 20140410

Contents

User Manual

Fihonest Communication Co.,Ltd. Fihonest Communication Co.,Ltd 1 Proprietary and Confidential ® JS-BTM256 Fihonest Bluetooth Module Instruction Manual Document Type: Bluetooth Module Datasheet Document Version: V1.01 Release Date: April 10, 2014 Copyright 2012 by Fihoenst Communication Co., Ltd. All Rights Reserved. Reproduction of this document, in part of in whole, by any means is prohibited without written permission from Fihonest Communication Co., Ltd. The information contained herein is believed to be accurate as of the date of publication. However, Fihonest is not liable for any damages, including indirect or consequential from the use of software this document represents, or any reliance of the accuracy of this document. Fihoenst reserves the right to change the contents of this document at any time without notice. This document contains proprietary confidential trade secrets and may be subject to additional restrictions contained in the licensing agreement under which this document was obtained.
Fihonest Communication Co.,Ltd. Fihonest Communication Co.,Ltd 2 Proprietary and Confidential ® Revision History Date Version Description Author 2013-09-10 V1.0 n First Release 2014-04-10 V1.01 n Add Installation Method(Page 4)
Fihonest Communication Co.,Ltd. Fihonest Communication Co.,Ltd 3 Proprietary and Confidential ®CONTENT 1.INTRODUCTION................................................................................................................................. 4 1.1 BLOCK DIAGRAM ................................................................................................................................. 4 1.2 FEATURES ............................................................................................................................................ 6 1.3 APPLICATIONS ..................................................................................................................................... 7 2.GENERAL SPECIFICATION ............................................................................................................ 8 3.PHYSICAL INTERFACE………………………………………………………………………...…93.1 POWER ................................................................................................................................................ .9 3.2 External clock reference.....................................................................................................................10 3.3 Audio Codec/PCM............................................................................................................................. 11 3.3.1 PCM Maseter.............................................................................................................................. 11 3.3.2 PCM Slave ................................................................................................................................. ..11 3.4 UART Interface Timing..................................................................................................................... 12 4.ELECTRICAL CHARACTERISTIC .................................................................................................134.1 ABSOLUTE MAXIMUM RATINGS ...........................................................................................................13 4.2 RECOMMENDED OPERATING CONDITIONS ........................................................................................... 13 4.3 POWER CONSUMPTIONS........................................................................................................................ 13 5.RECOMMENDED TEMPERATURE REFLOW PROFILE...........................................................14NOTE: Please notice that if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC ID:2AB2RJS-BTM256, IC: 11877A-JSBTM256” any similar wording that expresses the same meaning may be used. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. l'appareil hôte doit porter une étiquette donnant le numéro de certification du module d'Industrie Canada, précédé des mots « Contient un module d'émission », du mot « Contient » ou d'une formulation similaire exprimant le même sens, comme suit
Fihonest Communication Co.,Ltd. Fihonest Communication Co.,Ltd 4 Proprietary and Confidential ® 1. INTRODUCTION The JS-BTM256 Bluetooth® module is a perfect solution for smart phones and portable devices. It can be connected with any Bluetooth® devices in an operating range. It is slim and light so the designers can have better flexibilities for the product shapes. The JS-BTM256 Bluetooth® module complies with Bluetooth® specification version 4.0(dual mode). It supports multiple profiles.It supports maximum bluetooth data rates over HCI UART interface and provides audio PCM interface for bluetooth. the user manual must state the following items： a. The module is limited to OEM installation ONLY; b. The OEM integrators is responsible for ensuring that end-user has no manual instructions to remove or install module; c. The module is limited to installation in mobile or fixed application d. The separate approval is required for all other operating configurations, including portable configuration with respect to Part 2.1093 and different antenna configurations; e. the host manufacturer is responsible for ensuring that after the module is installed and operational the host continues to be compliant with the Part 15B unintentional radiator requirements Installation Method: a. About the operating environment of wireless Bluetooth, the wireless signals include the Bluetooth application are affected largely by the environment around, such as trees,metals.etc. The barriers will absorb the wireless signals partly and the distance of the data-transmission will be affected partly in the real application. b. Module serial port level is 1.8V. You need to increase level translator chip if you need to connect with 3.3V level system. c. The Bluetooth module need to be matched with the existing system.put in the outer shell. Because the wireless radio-frequency signal will be shield by metal shell. You’d better not to install in the metal shell. d. PCB Design:The metal will weaken radio,you’d better not to set the gound and wire under the antenna. Contact us: We supply with the whole Bluetooth data-transmission solution, various kinds of Bluetooth data-transmission, industrial application areas, PC Bluetooth drive software development technology support.
Fihonest Communication Co.,Ltd. Fihonest Communication Co.,Ltd 5 Proprietary and Confidential ® The detail information of JS-BTM256 Bluetooth® module is presented in this document below. 1.1 Block Diagram UART CC2564 Filter Crsytal 26MHz PCM Slow Clock VBAT VDD_IO Level Shift UART
Fihonest Communication Co.,Ltd. Fihonest Communication Co.,Ltd 6 Proprietary and Confidential ® 1.2 Features ü Small overall dimension ü Bluetooth Specification V4.0(dual mode) ü Class 1.5 support(high output power) ü Support multiple profiles ü Small size with low power consumption ü Supports maximum Bluetooth data rates over HCI UART interface ü Lead Free design which is compliant with RoHS requirements ü Physical connection as SMD type ü No radio signal interference, support for 802.11 co-existence ※ Some features are optional for customization on demand.
Fihonest Communication Co.,Ltd. Fihonest Communication Co.,Ltd 7 Proprietary and Confidential ® 1.3 Application ü Smart Phones ü MID ü Portable Devices ü High Quality Stereo Bluetooth Headsets ü High Quality Wired Stereo Headset and Headphones ü Bluetooth Speakers
Fihonest Communication Co.,Ltd. Fihonest Communication Co.,Ltd 8 Proprietary and Confidential ® 2. GENERAL SPECIFICATION General Specification Chip Set TI CC2564 Module ID JS-BTM256 BT Standard Bluetooth® V4.0 specification Frequency Band 2.402GHz~2.480GHz ISM Band Modulation FHSS,GFSK,DPSK,DQPSK Number of channels 79 channels for Classic Bluetooth 40 channels for Bluetooth Low Energy Baseband Crystal OSC 26MHz RF Input Impedance 50 ohms Host Interface l PCM l HCI UART Profile Multiple Profiles by Host Bluetooth Stack Operating Environment Temperature -40ºC to +85ºC Humidity 10%~95% Non-Condensing Environmental RoHS Compliant Bluetooth Specification Characteristics Condition TYP BT Spec. Unit Output Power Class 1.5 9.9 10.5 dBm dF1 avg 161 140 ~ 175 KHz dF2 max 129 >115 KHz Modulation GFSK dF2avg/dF1avg 86 80 % RMS DEVM 5 13 % %99 DEVM 10 20 % Modulation EDR @ 8DPSK Peaj DEVM 12 25 % GFSK@ BER=0.1% -91 -70 dBm ∏/4-DQPSK@ BER=0.1% -91 -70 dBm Sensitivity @ Dirty Tx On 8DPSK@ BER=0.1% -84 -70 dBm GFSK@ BER=0.1% -10 -20 dBm ∏/4-DQPSK@ BER=0.1% -10 -20 dBm Maximum Input Level 8DPSK@ BER=0.1% -10 -20 dBm
Fihonest Communication Co.,Ltd. Fihonest Communication Co.,Ltd 9 Proprietary and Confidential ® 3. PHYSICAL INTERFACE 3.1 Power Device Power Up/Down Sequencing nSHUTD VDD_IO VBAT SLOW CLOCK nSHUTD Requirements Parameter Sym Min. Max. Unit Operation mode level Vih 1.42 1.98 V Shutdown mode level Vil 0 0.4 V Minimum time for nSHUT_DOWN low to reset the device 5 ms Rise/fall times Tr/Tf 20 us 20uS max 2mS max Shut down before VDD_IO removed
Fihonest Communication Co.,Ltd. Fihonest Communication Co.,Ltd 10 Proprietary and Confidential ® 3.2 External clock reference External Slow Clock signal characteristics Characteristics Condition Sym Min Typ Max Unit Input slow clock frequency 32768 Hz Input slow clock accuracy +/-250 ppm Input transition time tr/tf-10% to 90% tr/tf 100 ns Frequency input duty cycle 15% 50% 85% Phase noise At 1KHz_ -125 dBc/Hz Jitter Integrated over 300 to 15000Hz 1 Hz Vih 0.65*VDD_IO VDD_IO V peak Slow clock input voltage limits Square wave, DC coupled Vil 0 0.35*VDD_IO V peak Input impedance 1 Mohm Input capacitance 5 pF
Fihonest Communication Co.,Ltd. Fihonest Communication Co.,Ltd 11 Proprietary and Confidential ® 3.3 Audio Codec/PCM AUD_CLK AUD_IN/FSYNC_IN AUD_OUT/FSYNC_OUT 3.3.1 PCM Maste Symbol Parameter Condition Min Max Unit Tclk Cycle time 62.5(16MHz) Tw High or low pulse width 40% of Tclk Tis AUD_IN setup time 8 Tih AUD_IN hold time 0 Tis AUD_FSYNC setup time 8 Tih AUD_FSYNC hold time 0 Top AUD_OUT propagation time 40pF load 0 21 ns 3.3.2 PCM Slave Symbol Parameter Condition Min Max Unit Tclk Cycle time 62.5(16MHz) Tw High or low pulse width 40% of Tclk Tis AUD_IN setup time 8 Tih AUD_IN hold time 0 Tis AUD_FSYNC setup time 8 Tih AUD_FSYNC hold time 0 ns Tclk Tw Tw Tis Tih Top
Fihonest Communication Co.,Ltd. Fihonest Communication Co.,Ltd 12 Proprietary and Confidential ® 3.4 UART Interface Timing HCI_RTS HCI_RX HCI_CTS HCI_TX Symbol Characteristics Condition Min Type Max Unit Baudrate 37.5 4000 kbps Baudrate accuracy -2.5% 1.5% T3 CTS low to TX_DATA on 0 2 us T4 CTS high to TX_DATA off Hardware flow contoll 1 byte T6 CTS-high pulse width 1 bit T1 RTS low to RX_DATA on 0 2 us T2 RTS high to RX_DATA off 16 byte T1 T2 T6 T3 T4 10 bits start bit stop bit
Fihonest Communication Co.,Ltd. Fihonest Communication Co.,Ltd 13 Proprietary and Confidential ® 4. ELECTRICAL CHARACTERISTIC 4.1 Absolute Maximum Ratings Symbol Description Min Max Unit VBAT Input Supply Voltage -0.5 5.5 V VDD_IO Digital Bluetooth I/O Voltage -0.5 2.145 V 4.2 Recommended Operating Ratings Symbol Min. Typ. Max. Unit VBAT 2.2 3.3 4.8 V VDD_IO 1.62 1.8 1.92 V 4.3 Power consumptions Test conditions: VBAT=3.3V; Temp=25 ºC Current @ VBAT Item Typ.(Target) Max. Unit idle + sleep 0.04 mA ACL 27 mA ACL sniff 6.8 mA ACL sniff + sleep 0.04 0.6 (peak) mA eSCO 2EV3(ACL connection on) 30 mA eSCO 2EV3 + ACL sniff 13.5 mA eSCO 2EV3 + ACL sniff + sleep 11.1 12.2 mA Inquiry_scan and page_scan 398 μA Inquiry_scan 99 μA page_scan 256 μA Adertising,nonconnectable (one time/1s) 107 μA Adertising,discoverable (one time/1s) 113 μA Scanning (one time/1s) 319 μA Connected (master role) (one time/500ms) 125 μA Table 1 Table 2
Fihonest Communication Co.,Ltd. Fihonest Communication Co.,Ltd 14 Proprietary and Confidential ® 5. RECOMMENDED TEMPERATURE REFLOW PROFILE The soldering profile depends on various parameters necessitating a set up for each application. The data here is given only for guidance on solder reflow. Peak Temperature : <250°C Number of Times : _2 times

Navigation menu