FengShun Peiying Electro Acoustic XVM296BT Car Media Receiver User Manual XDVD276BT QSG EN V02 nsc08032017

FengShun Peiying Electro-Acoustic Co., Ltd Car Media Receiver XDVD276BT QSG EN V02 nsc08032017

User Manual

Copyright and Trademark NotesSD Logo is a trademark of SD-3C, LLC. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG , Inc. Other trademarks and trade names are those of their respective owners.324This Quick Start Guide gives you the basics to start using your XVM296BT. Please visit www.dualav.com/support/manuals.phpto download a complete owner’s manual or call customerservice at 1-866-382-5476 (Monday-Friday, 9AM-5PM EST).Media Receiver with Bluetoothfeaturing 6.2” Touch Screen DisplayXVM296BTInstallationWiring Diagram - Inputs/OutputsControl LocationsGeneral OperationAudio Operation 1. Mode2. Tune/Track Down3. Volume/Power/Mute4. Tune/Track Up1. Information Display2. Current Mode Indicator3. Tune Up4.Stereo5.AS/PS6. Preset7.Local/DX8.Band9. Tune Down Tuner OperationSelect the Tuner icon from the Main Menu screen or press MODE unit Tuner is selected.1This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase.Dual Electronics Corp. agrees, at our option, during the warranty period, to repair any defect in material or workman-ship or to furnish an equal new, renewed or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period.Who is covered? This warranty is extended to the original retail purchaser for products purchased from an authorized Dual dealer and used in the U.S.A.What is covered? This warranty covers all defects in material and workmanship in this product. The following are not covered: software, installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found via www.dualav.com.What to do? 1. Before you call for service, check the troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call.2. If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center. 3. Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment.4. For more information and for the location of the nearest authorized service center please contact us by one of the following methods:• Call us toll-free at 1-866-382-5476(Monday-Friday, 9:00 a.m. to 5:00 p.m. EST)• E-mail us at cs@dualav.comExclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company’s negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental or consequential damages.©2018 Dual Electronics Corp.NSC0518-V01Printed in ChinaOne-Year Limited Warranty www.dualav.comFCC ComplianceThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: : •Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help.TYPICAL FRONT-LOAD DIN MOUNTING METHODUSB Operations1. Previous Menu2. File Search3. Settings4. File Down5. File Up7. Track Up8. Play/Pause9. DIM10. Track DownUSB operation will work the same way when you insert the USB device into unit’s USB port. In the Menu mode, press the desired icon to enterthe corresponding mode: Radio, SD Card, USB,BT Phone, BT Audio, Aux In, Camera, Settings.Press the function icons to select the setup menu. Press Sound Effect icon in the Settings menu to select EQ Presets, 2-Band Tone Control, Fader and Balance controls.Pairing and ConnectingBefore using Bluetooth functions, you must pair your mobile phone to the XVM296BT unit. The device name is "XVM296BT". To ensure the best reception for pairing and re-connection, please make sure the mobile phone battery is fully charged before you begin.• Try to perform pairing within a few minutes of the mobile phone being turned on.• Once the unit has been paired with the mobile phone, the unit’s model number,“XVM296BT”, will be displayed on the mobile phone.•To achieve the best performance, always keep the mobile phone within 10 feet(3 meters) of the unit.• Always keep a clear path between the mobile phone and the unit. Never place ametal object or any other obstacle between the mobile phone and the unit.• Some mobile phones may have a “Power Saving Mode” option. PLEASE DO NOTuse the power saving mode with the XVM296BT.• Before accepting or making a call, make sure your mobile phone’s“Bluetooth function” is turned on.• To ensure the best conversation quality/performance, stay within 3 feet (1 meter)of the unit’s microphone when talking.Dialing a NumberPress to display keypad and dial a number.Making and Ending a CallPress to connect a call, and press to end a call.Streaming Audio Press to play or pause the music. Press to skip to the previous track. Press to advance to the next track. Bluetooth OperationBluetooth MicrophoneThe microphone is built-in to the receiver.Transferring AudioPress to transfer audio between the head unit and mobile phone. REVERSEREMOTE TURN-ONGRAYGRAY/BLACKACC 12V (+)TFT DIMMER (+)FUSE6. AudioVIOLETVIOLET/BLACKMain MenuCAM IN RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in public exposure condition without restriction.

Navigation menu