Faurecia Clarion Electronics PF3302 Car Audio User Manual E Display j A 100308

Clarion Co Ltd Car Audio E Display j A 100308

UserManual.wiki >

Faurecia Clarion Electronics >

PF3302 User Manual

User Manual

SUBARU CAR AUDIODISPLAY MODELOPERATION MANUALDisplay model :PF-3302PF-3303PF-3304PF-3305CAUTION:*Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authorityto operate the equipment..*This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled equipment and meetsthe FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radiofrequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply withoutmaximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keepingthe radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).*This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

1. Key Function Specification & Explanation1.2 Escutcheon Key1.3 Steering remote control Key・All the steering remote control keys are A/D keys. The priority depends on the circuit.SW2-2 ST-ON HOOKSW2-1 ST-MODESW1-1SW1-2SW1-3SW1-4 ST-VOL DOWN(VOL-)T.I/NEWSTUNE/TRACK>>/SCANT.I/NEWSCD EjectVOLUMECD/AUXPreset 2/RDMRDSTUNE/TRACKST-VOL UP(VOL+)ST-DOWN(∨)>>/SCAN >>/SCAN<</A.STEXT CD EjectVOLUMECD/AUXPreset 6/RPTPOWERPreset 4Preset 5/RDMPreset 6/RPTPOWERT.I/NEWSPreset 2Preset 3Preset 2Preset 3CD EjectPOWERVOLUMECD/AUXSATHD/TAGFM/AMMENU/ENTERMENU/ENTERTUNE/TRACK>>/SCANCD/AUXFMAMPreset 4Preset 1/RPTPreset 2/RDMPreset 1/RPTPreset 4Preset 3Preset 3Preset 4Preset 5/RDMST-UP(∧)AMAMSW2-4 ST-TALKSW2-3 ST-OFF HOOKE-8E-9E-10E-11No Key nameE-12E-13E-15SUBARU PD5LIST/BACKE-18 <</A.SPreset 5E-19 LIST/BACKE-1E-3E-4E-17E-14E-16E-5E-6E-7E-2TUNE/TRACK/CHPreset 5Preset 6MENU/ENTERMENU/ENTERVOLUMEPreset 1 Preset 1<</A.SLIST/BACKLIST/BACK<</A.SFMFMPreset 6CD EjectPOWERRDSRDSSUBARU PD5Key nameNo USA(LH) EU(LH) EU(RH) AUS(RH)E-1E-2E-4E-3E-5E-14E-6E-7E-17E-15E-16E-18E-19E-8 E-9 E-10 E-13E-12E-11SW1-1SW2-2SW2-3SW2-1SW1-4SW1-3SW1-2SW2-4Clarion 1/25

2. Power Mode2.1 ACC On/OffDetails of operations2.2 Power On/OffDetails of operations3.1 Radio(RBDS HD)Details of operationsFunction Volume Up/DownMode Power OnKey operation Rotating Volume keyFunctionACC OnModeACC OffKey operationACC On operationOutline of functions "ACC Oｎ" operation is executed.FunctionACC OffModeACC OnKey operationACC Off operationOutline of functions "ACC Off" operation" is executed.Function Power OnModeACC On　 (except for TEL mode)Key operation ・Pressing Power key・Pressing ST-Mode keyOutline of functions Power is set to On.Function Power OffMode Power On　 (except for TEL mode)Key operation Pressing Power keyOutline of functions Power is set to OfOutline of functions Volume is controlled.Function Radio OnMode Except for FM/AM modeKey operation Pressing FM/AM keyOutline of functions Radio mode is set to On.Function Switch of BANDMode During FM/AM modeKey operation Pressing FM/AM keyOutline of functions Radio band is changed.Function Tune Up/DownOutline of functions Receivable frequency is detected.Key operation Short pressing of >>/SCAN keyOutline of functions Stations are received sequentially.Outline of functionsFunction Seek Up/DownMode During FM/AM modeKey operation Rotating Volume keyMode During FM/AM modeKey operation Pressing Seek Up/Down keyFunction SCANMode During FM/AM modeKey operation Pressing Set Up/Down keyOutline of functions Preset-ch is changed by 1ch.Function Preset-ch Up/DownMode During FM/AM modeKey operation Holding of Preset keyOutline of functions Receiving frequency is registered.Function Preset registrationMode During FM/AM modeKey operation Short pressing of Preset keyOutline of functions Registered frequency is called.Function Calling PresetMode During FM/AM modeKey operation -Outline of functions Seek/Scan is stopped.Function Seek stop / Scan stopMode During FM/AM mode (During Seek/Scan)Clarion 2/25

Outline of functions Preset channel list in the received band is displayed.Key operation ■Holding of List/Back ：　　　・Preset channel list mode is switched between ON and OFF.　　　　　→ When main screen is displayed: Preset channel list is displayed. (List mode ON)　　　　　→ When Preset ｃｈ list is displayed： Main screen is displayed. (List mode OFF)■Short pressing of Menu/Enter：　　　・The highlighted item is selected.■Rotation of Tune/Track ：　　　・The list cursor moves up or down.　　　　　→In the case of the counterclockwise turn from the list top (P.ch1), the cursor moves to the end ofthe list (P.ch6).　　　　　→In the case of the clockwise turn from the list end (P.ch6), the cursor moves to the top (P.ch1).　　　　* After operating the cursor, the cursor position selection icon is lighted.■Holding of P.ch1～P.ch6 ：　　　・The selection icon corresponding to the pressed P.ch key is lighted.　　　　* After pressing P.ch key, the cursor position does not change.■Pressing of station control Up：　　　・If the received frequency is between P.ch1 and P.ch5, P.ch(+1) selection icon is lighted.　　　・If the received frequency is P.ch6, P.ch1 selection icon is lighted.　　　・If the received frequency is not P.ch, P.ch1 selection icon is lighted.　　　　* After pressing the key, the cursor position does not change.■Pressing of station control Down：　　　・If the received frequency is between P.ch2 and P.ch6, P.ch(-1) selection icon is lighted.　　　・If the received frequency is P.ch1, P.ch6 selection icon is lighted.　　　・If the received frequency is not P.ch, P.ch6 selection icon is lighted.　　　　* After pressing the key, the cursor position does not change.Function Preset channel list modeMode During FM/AM modeKey operation Holding of HD/TAG keyOutline of functions On-air music information is memorized.Function iTunes TaggingMode During FM/AM mode (During receiving Digital data)Key operation Rotation of Tune keyOutline of functions HD Radio is switched between ON (Hybrid) and OFF (Analog).Function HD Radio ON/OFF switchMode HD Radio ON/OFF switch display of Setting Mode (in any mode)Key operation Short pressing of HD/TAG keyOutline of functions Transition to Multi station (MPS / SPS1 / SPS2 / SPS3 …) in the same stationFunction Switching between multiple stationsMode During FM modeKey operation Pressing >>/SCAN and <</AS keysOutline of functions SEEK is executed in PTY group.Function PTY SEEKMode In FM mode and PTY group selection modeKey operation Pressing LIST/BACK keyOutline of functions The mode is transited to PTY group selection mode.Function PTY group selection functionMode During FM modeKey operation Holding of <</A.S keyOutline of functions Receivable frequency is registered to Preset.Mode During FM/AM modeClarion 3/25

*Refer to "DisplaySpec_List" for the actual Preset channel list display.While receiving FM (HD ON);While receiving FM (HD OFF);While receiving AM (HD ON);DisplayAMBAND displaySelection cursor(Highlighted)Preset channel displayFrequencydisplayPreset List530Selection icon600100014001630530FM1BAND displaySelection cursor(Highlighted)Preset channel displayIndicatorsFrequency displayMultiple station Nos. are also displayed. (-2to 8 for SPS stations only）Preset List106.7-21Selection icon106.72106.73106.74106.75106.7-46HD) 1 2 3 4 5 6 7 8LIVETAGWWWWWWWWStation NameDisplay of selected station　（Name of CH selected by cursor）PTYSTEREO123456HD)WWWWWWWWStation NameDisplay of selected station　(Name of CH selected by cursor)Displayed only in the case of HD ONDisplayed only in the case of HD ONFM1BAND displaySelection cursor(Highlighted)Preset channel displayIndicatorsFrequency displayMultiple station Nos. arenot displayed.Preset List106.71Selection icon106.72106.73106.74106.75106.76WWWWWWWWStation NameDisplay of selected station　(Name of CH selected by cursor)PTYSTEREOLIVETAGIndicatorsClarion 4/25

While receiving AM (HD OFF);Explanation of indicator4. Radio(RDS)Function specificationKey operation Pressing of AM keyOutline of functionsAM band is switched.Function Change of AM BANDMode In AM modeKey operation Pressing of FM keyOutline of functions FM band is switched.Function Change of FM BANDMode In FM modeKey operation Pressing of AM keyOutline of functionsAM is set to ON.FunctionAM OnMode Except for AM modeKey operation Pressing of FM keyOutline of functions FM is set to ON.Function FM OnMode Except for FM modeOutline of functions Indicator is lighted when PTY group selection is ON in FM mode.Mode In FM mode (While receiving RBDS and HD ON)Key operation Short pressing of LIST/BACK keyOutline of functions Indicator is lighted when STEREO broadcasting is received.Function PTY indicatorMode During FM mode (During receiving Analog data)Key operation -Outline of functions Indicator is lighted when Ballgame is received.Function ST indicatorMode During FM/AM mode (During receiving Digital data)Key operation -Outline of functions Indicator is lighted when iPod Tagging receiving becomes available.Function Live indicatorMode During FM/AM mode (During receiving Digital data)Key operation -Outline of functions Indicator is lighted when HD Radio is ON and Digital Audio signal is being received.Function Tagging indicatorMode During FM/AM mode (During receiving Digital data)SKey operation -Outline of functions Displayed text data page is turned.Function HD indicatorMode HD ON: AM/FM mode (Artist/Song data receiving condition)HD OFF: FM mode (RDBS text receiving condition)Key operation Pressing of TEXT keyFunction Text page feedingAMBAND displaySelection cursor(Highlighted)Preset channel displayFrequencydisplayPreset List530Selection icon600100014001630530123456Clarion 5/25

Key operation -Outline of functions NEWS interruption receipt is executed.Function NEWS interruption functionMode -Key operation -Outline of functions TI interruption receipt is executed.Function TI interruption functionMode -Key operation -Outline of functionsALARM interruption receipt is executed.FunctionALARM interruption functionMode -Key operation Pressing of TI/NEWS key for more than 0.5 secondsOutline of functions NEWS function is set to ON/OFF.Function NEWS function ON/OFFMode Power ON (Except for AM, TEL, and camera mode)Key operation Pressing of TI/NEWS key for less than 0.5 secondsOutline of functions TI function is set to ON or OFF.Function TI function ON/OFFMode Power ON (Except for AM, TEL, and camera mode)Key operation Operation in MENUOutline of functions REG function is set to ON/OFF.Function REG function ON/OFFModeKey operation Pressing of RDS keyOutline of functionsAF function is set to ON or OFF.FunctionAF function ON/OFFMode During FM modeKey operation -Outline of functions Executed Auto Store is stopped.Function Stop of Auto StoreMode During FM/AM mode (In Auto Store)Key operation Holding of <</A.S. key for 1.5 seconds or moreOutline of functions Receivable frequency is registered to Preset.FunctionAuto StoreMode During FM/AM modeKey operation Pressing of ST-Up/Down keyOutline of functions Preset channel is changed by 1ch.Function Preset-ch Up/DownMode During FM/AM modeKey operation Holding of Preset keyOutline of functions Receiving frequency is registered.Function Preset registrationMode During FM/AM modeKey operation Short pressing of Preset keyOutline of functions Registered frequency is called.Function Calling of PresetMode During FM/AM modeKey operation -Outline of functions Preset Scan is stopped.Function Stop of Preset ScanMode During FM/AM mode (Preset Scanning)Key operation -Outline of functions Seeking operation is stopped.Function Stop of SeekMode During FM/AM mode (Seeking)Key operation Holding of >>/SCAN keyOutline of functions Preset channel is received sequentially.Function Preset SCANMode During FM/AM modeKey operation Pressing of Seek Up/Down keyOutline of functions The receivable frequency is detected.Function Seek Up/DownMode During FM/AM modeKey operation Rotation of Tune keyOutline of functions The receiving frequency is changed by the specified number of steps.Function Tune Up/DownMode During FM/AM modeClarion 6/25

*Refer to "DisplaySpec_List" for the actual Preset channel list display.When FM is received;When AM is received;5. MM5.1 CD(Common)Outline of functions Preset channel list of the receiving band is displayed.DisplayKey operation ■Pressing of List/Back：　　　・Preset channel list mode ON/OFF setting is switched.　　　　　Preset channel list screen is displayed if the key is pressed while the main screen is displayed. 　 The main screen is displayed if the key is pressed while Preset ｃｈ list screen is displayed.■Short pressing of Menu/Enter：　　　・Channel at the selected cursor position is selected.■Rotation of Tune/Track：　　　・The list selection cursor moves up or down.　　　　　　→In the case of counterclockwise rotation from the list top (P.ch1), the cursor moves to the end of the list(P.ch6).　　　　　　→In the case of clockwise rotation from the list end (P.ch6), the cursor moves to the top (P.ch1).　　　　* After cursor operation, the cursor position selection icon is lighted.■Pressing of List/Back：　　　・Preset channel list mode is reset. ■Pressing of ST_Up/ST_Dowm (Preset ch. Up/Down)：　　　・P.ch selection icon corresponding to the pressed ST_Up/ST_Down key is lighted.　　　　* After pressing keys, the cursor position does not change.Function Preset channel list modeMode During FM/AM modeKey operation -Outline of functions Frequency receivable by traffic information broadcast station (TP station) is detected.Function TP SeekMode During FM modeKey operationOutline of functions RDS interruption is reset.Function RDS interruption resetMode During interruption operationFM1BAND displaySelection cursorPreset channel display IndicatorsFrequency displayPreset ListWWWWWWWW1Selection icon106.702106.703106.7045106.706AF TASTEREOName is displayed if PS Name has been acquired.WWWWWWWWAMBAND displaySelection cursorPreset channel displayFrequency displayPreset List11341Selection icon1134211343113441134511346Clarion 7/25

Details of operations5.2 CD(CDDA)Details of operations5.3 CD(MP3/WMA/AAC)Details of operationsKey operationKey operationKey operationFunction RPT change(MP3/WMA/AAC)Outline of functions Returning to the previous FolderKey operation Short pressing of << / SCAN keyFunction Folder DownMode MP3/WMA/AACKey operation Short pressing of >> / AS keyOutline of functions Proceeding to next FolderFunction Folder UpMode MP3/WMA/AACOutline of functions Random mode is switched.Mode CDDAPressing of Preset 2/RDM key (Left-hand drive)Pressing of Preset 5/RDM key (Right-hand drive)Outline of functions Repeat mode is switched.Function RDM change (CDDA)Mode CDDAPressing of Preset 1/RPT key (Left-hand drive)Pressing of Preset 6/RPT key (Right-hand drive)Function RPT change (CDDA)Key operationOutline of functions CD (Common)ERROR displayFunction CD (Common) ERROR displayMode CDDA, MP3/WMA/AACKey operation Pressing of ST-Mute keyOutline of functions Playback is stopped and the sound is muted.Function PauseMode CDDA, MP3/WMA/AACKey operation Holding of << / SCAN keyOutline of functions Played track is fast-wound.Function FBMode CDDA, MP3/WMA/AACKey operation Holding of >> / AS keyOutline of functions Played track is fast-fed.Function FFMode CDDA, MP3/WMA/AACKey operation Counterclockwise rotation of TUNE/Track rotary keyOutline of functions Back to the top of the track being played or back to the previous track.Function Track DOWNMode CDDA, MP3/WMA/AACKey operation Clockwise rotation of TUNE/Track rotary keyOutline of functions Skip to next trackFunction Track UpMode CDDA, MP3/WMA/AACKey operation Pressing of CD Eject keyOutline of functions Disc is ejected.Function CD EjectMode CDDA, MP3/WMA/AACKey operation Insertion of DISCOutline of functions DISC Insertion operation is executed.Function CD InMode CDDA, MP3/WMA/AACKey operation Pressing of CD keyOutline of functions The mode is transited to CD mode.Function CD OnMode CDDA, MP3/WMA/AACMode MP3/WMA/AACPressing of Preset 1/RPT key (Left-hand drive)Pressing of Preset 6/RPT key (Right-hand drive)Outline of functions Repeat mode is switched.Clarion 8/25

Display2.2.3.1.4. USBDetails of operationsDisplay・Display on iPod main body when iPod is connected166 dots76 dotsFunction RDM change (MP3/WMA/AAC)Mode MP3/WMA/AACPressing of Preset 2/RDM key (Left-hand drive) or Preset 5/RDM key (Right-hand drive)Outline of functions Random mode is changed.Key operationFunction List mode OnMode MP3/WMA/AACKey operation Short pressing of List/Back keyOutline of functions List mode is set to ON.Function List mode operationMode During MP3/WMA/AAC List modeKey operation ■Short pressing of Menu/Enter ：　　　・The highlighted item is selected and the cursor transits to the list of the lowest layer.　　　　 (In the case of the final layer, the highlighted item is reproduced.)■Rotation of Tune/Track ：　　　・List cursor is moved up or down.　　　　　　→In the case of counterclockwise rotation from the list top, the cursor moves to the end of the list.　　　　　　→In the case of clockwise rotation from the list end, the cursor moves to the top of the list.■ Short pressing of List/Back ：　　　・The cursor returns to the list higher layer. (In the case of the topmost layer, the list is reset.)■Holding of List/Back ：　　　・The list mode is reset.Outline of functions ・Folder and File are selected and operated on the list.・The track is selected in the order of Folder→File.・On Folder selection screen, the folder name is displayed as it is.・On File selection screen, the extension (.mp3/.wma/.aac) of the file name is deleted when displayed.Function CD (MP3/WMA/AAC)ERROR displayMode MP3/WMA/AACKey operationOutline of functions CD (MP3/WMA/AAC)ERROR displayFunction Insertion of USB deviceMode In USB modeKey operation N/AOutline of functions Recognition of connectionFunction USB ERROR displayMode During USB modeKey operationOutline of functions ERROR display when USB device is connected5.4 iPodDetails of operationsFunctionAttaching and detaching of iPodMode iPodKey operation -Outline of functions Operation when iPod is attached to or detached from DisplayAudioFunction iPod mode OnModeACC On (except for iPod mode) and when iPod is connectedKey operation Pressing of mode change keyOutline of functions The mode is changed to iPod mode.Function iPod mode Off (Transition to other modes)ModeACC On (except for iPod mode) and when iPod is connectedKey operation ・Mode change keyOutline of functions iPod mode is ended.Clarion 9/25

6. AUX TEL VTR6.1 AUXDetails of operations6.2 VTRDetails of operationsFunctionAUX device connection judgmentFunction Track Up/DownMode Playback of iPodKey operation Short pressing of Tune/Track Up keyOutline of functions Track is moved Up or Down.Function FF/FBMode iPodKey operation ・Holding of >> / AS key　　　　 (ＦＦ)Outline of functions FF/FB is executed.Function RPT change (iPod)Mode iPod　　*Except for the time during playback of AudiobookKey operation Pressing of Preset １/RPT key (Left-hand drive)Pressing of Preset 6/RPT key (Right-hand drive)Key operation Pressing of Preset 1 keyOutline of functions iPod RPT function is switched.The indication is switched after confirming that iPod state is shifted. (Advanced indication is not possiblebecause there might be the case that iPod condition does not change even if the command is sent.)Function Shuffle change (iPod)Mode iPodDisplayKey operation Pressing of Preset 2/RPT key (Left-hand drive)Pressing of Preset 5/RPT key (Right-hand drive)Outline of functions iPod Shuffle function is switched.The indication is switched after confirming that iPod condition is switched. (Advanced indication is notFunction Change of playback speedMode iPod　　*Only during playback of AudiobookDisplayKey operation Pressing of Preset １/RPT key (Left-hand drive)Pressing of Preset 6/RPT key (Right-hand drive)Outline of functions iPod playback speed is changed.The indication is switched after confirming that iPod condition is switched. (Advanced indication is notpossible because there might be the case that iPod condition does not change even if the command is sent.)Function iPod List mode OnMode iPodDisplayKey operation ・Pressing of List / Back keyOutline of functions iPod List mode is set to ON.Function iPod List mode operationMode During iPod List modeKey operation ■Short pressing of Menu/Enter ：Outline of functions By setting iPod List mode to ON, the track can be selected in the list like iPod.Function iPod ERROR displayMode iPodKey operation -Outline of functions ERROR display when iPod is connectedFunction iTunes tagging information transferMode iPodKey operation -Outline of functions iTunes tagging information is transferred to iPod when iPod is connected.Mode When ACC is OnKey operation N/AOutline of functions It is judged whether AUX device is connected in the universal input port of the microcomputer.FunctionAUX mode OnMode When ACC is On (Power On)Keyoperation(YT2mc)Short pressing of AUX key　 (Operated when the key is ON)Key operation(PD5) Pressing of CD/AUX keyOutline of functions The mode is transited to AUX mode.Function Volume exclusive for AUXMode During AUX modeKey operation Volume key rotationOutline of functions ・Volume exclusive for AUX is moved UP or DOWN.Function Judgment of VTR device connectionMode When ACC is OnKey operation N/AOutline of functions It is judged whether AUX device is connected in the universal input port of the microcomputer.Judging method Refer to the universal port input monitor control functionClarion 10/25

Connection image diagramFunction No. 42Main body of DCU set Sie-BUS cable XM BB (Master microcomputer)Without XM BB connectionSelection is not available.When only XM BB is connected; (In the case of BAND3)XM1 →XM2 →XM3 →XM1 →When XM BB (BAND 3) + Media Hub ( Media1,2 ) are connected;XM1 →XM2 →XM3MEDIA1 →MEDIA2 →XM1 →7. SATFunction VTR mode OnMode When ACC is On (Power On)Key operation(YT2mc) Pressing of AUX keyKey operation(PD5) Pressing of CD/AUX keyOutline of functions The mode is transited to VTR mode.Function Volume exclusive for VTRMode During VTR modeKey operation Volume key rotationOutline of functions ・Volume exclusive for VTR is moved UP or DOWN.・Volume adjustment range and method in VTR mode are the same as the regular Volume Up/Down.Function Drive regulation in VTR modeFeature List No.Target modelMode During VTR modeKey operation N/AOutline of functions The video output is restricted depending on the vehicle driving condition (Parking Brake condition).7.1 XM/Sirius functionSatellite radio operation (XM)FunctionACC ON S_DCU_2_SAT_XM_ACC_ONModeACC OFF, source mode except for XM mode, Power OFFKey operationACC ON (during connection of XM BB), Connection of XM BB when ACC is ONOutline of functions XM BB is connected to the system.Function XM On S_DCU_2_SAT_XM_ONDisplayMode Source mode except for XM mode, Power OFFKey operation Pressing of SAT keyOutline of functions The mode is transited to XM Mode.Function Switching of band S_DCU_2_SAT_XM_BANDDisplayMode During XM modeKey operation Pressing of SAT keyOutline of functions XM band is switched.Clarion 11/25

CategoryID：：：：ROCK 6 DownPOP 7 ↑DECADES 10 ●The category is moved up or down from the HIP HOP 12 ↓selected one based on ID.：：Up：：CategoryID：：：：Only CH that belongs to the selected category ROCK 6 is moved UP or DOWN.POP 7●DECADES 10 CH 5 10 11 12 13 20 21HIP HOP 12 ←●→：： Down Up：：<Image of list display>↓Preset No.Pch 1 CH 001 Pch 4 CH 005 ←Channel No.Pch 2 CH 002 Pch 5 CH 007 ←CursorPch 3 CH 001 Pch 6 CH 011★This part is not displayed.Mode During XM modeFunction Channel Up/DownS_DCU_2_SAT_CH_UDMode During XM modeKey operation Rotation of TUNE keyST-UP, ST-DOWN keyOutline of functions Received channel is changed.Function Channel 10-digit Up/Down increments (SS_DCU_2_SAT_SEEK_UDMode During XM modeKey operation Pressing of >>/SCAN for less than 1.5 secondsShort pressing of <</A.S keyOutline of functions Received channel is incremented by 10 digits.Function Category Search Mode On S_DCU_2_SAT_CAT_MODE_ONMode During XM modeKey operation Pressing of LIST/BACK keyOutline of functions The mode is transited to Category Search Mode.In this mode, the category of user preference is selected and the channel included in the category is searched for.Function Category Up/Down S_DCU_2_SAT_CAT_UDMode During CATEGORY SEARCH modeKey operation Pressing of FOLDER Up/Down keyOutline of functions The category is changed.Function Up/Down of Category CH S_DCU_2_SAT_CAT_CH_UDDisplayMode During CATEGORY SEARCH modeKey operation Rotation of TUNE keyST-UP,ST-DOWN keyOutline of functions CH that belongs to the selected category is changed.Function Preset List S_DCU_2_SAT_PCH_LISTDisplayKey operation Holding of LIST/BACK keyOutline of functions The channel list registered in Preset is displayed.Function Calling of PresetS_DCU_2_SAT_PCH_CALLMode During XM modeKey operation Pressing of Preset key for less than 1.5 secondsOutline of functions CH that is registered to the corresponding Preset is called.DisplayClarion 12/25

イメージ (A) イメージ (B)Name:RADIO IDRADIO_ID_******** Title: ********000 CH Chn:----------Cat:----------Advisory Message is displayed in the following manner.Refer to F_DC_01_Screen layout for the actual display.イメージ (A) イメージ (B)Advisory MessageAdvisory MessageCheck item) Is DIAG display screen provided exclusively？Only the mode is displayed. It is updated every time the 8-byte data is notified by XM BB.イメージ (A) Image (B)Name:--------DIAG_******** Title: --------001 CH Chn: ********Cat:----------EXT DIAG display screen is similar to DIAG display screen.Function Registration of Preset S_DCU_2_SAT_PCH_STOREMode During XM modeKey operation Pressing of Preset key for 1.5 seconds or moreOutline of functions The received channel is registered to the corresponding Preset.Function Scan of Channels included in category S_DCU_2_SAT_CAT_SCANMode During CATEGORY SEARCH modeKey operation Pressing of SCAN key for 1.5 seconds or moreOutline of functions Channel included in the selected Category is scanned.FunctionALL CH Scan S_DCU_2_SAT_ALL_SCANMode During XM mode (During non-CATEGORY SEARCH mode)Key operation Pressing of SCAN key for 1.5 seconds or moreOutline of functions On-air channel is scanned.Function RADIO ID displayS_DCU_2_SAT_RADIO_IDMode During XM mode (During non-CATEGORY SEARCH mode)Key operation Key operation to select CH 0Outline of functions XM RADIO ID is displayed.Outline of functionsMode During XM modeKey operation Holding of multi-pressing keys of LIST/BACK + Preset 5The mode is transited to XM Ext Diag Mode.XM BB is externally connected to PC, and the performance of XM Module is evaluated in this mode.Without channel selection operation or key operationOutline of functions The condition related to XM broadcast is displayed.FunctionAdvisory Message displayS_DCU_2_SAT_XM_ADV_MSGMode During XM modeHolding of multi-pressing keys of LIST/BACK + Preset 6Outline of functions The mode is transited to XM Diag Mode.Function DIAG MODE On S_DCU_2_SAT_XM_DIAGMode During XM modeDiag Up/Down S_DCU_2_SAT_DIAG_UDMode In XM Diag ModeKey operation >>/SCAN, <</A.S キーONOutline of functions Received channel is changed.Function EXT DIAG MODE On S_DCU_2_SAT_XM_EXT_DIAGDisplayDisplayDisplayDisplayFunctionKey operationKey operationClarion 13/25

Connection image diagramFunction No. 42Main body of DCU set Sie-BUS cable Sirius BB (Master microcomputer)Without Sirius BB connectionNon-selectableWhen only Sirius BB is connected; (In the case of BAND3)SR1 →SR2 →SR3 →SR1 →When connecting Sirius BB (BAND 3) + Media Hub ( Media1,2 ) SR1 →SR2 →SR3MEDIA1 →MEDIA2 →SR1 →Satellite radio operation (Sirius)FunctionModeACC OFF, source modes except for Sirius mode, Power OFFACC ON S_DCU_2_SAT_SR_ACC_ONKey operationACC ON (during connection of Sirius BB), Connection of Sirius BB when ACC is ONOutline of functions Sirius BB is connected to the system.Mode During Sirius modeKey operation Pressing of >>/SCAN, <</A.S key for less than 1.5 secondsFunction Category Search Mode OnMode During Sirius modeKey operation Pressing of LIST/BACK keyOutline of functions The mode is transited to Category Search Mode.In this mode, the category of the user preference is selected and the channel included in the category is searchedfor.Function Category Up/DownMode During CATEGORY SEARCH modeKey operation Pressing of FOLDER Up/Down keyOutline of functions The category is changed.Mode Source mode except for Sirius mode, Power OFFKey operation Pressing of SAT keyOutline of functionsFunction Sirius On S_DCU_2_SAT_SR_ONThe mode is transited to Sirius Mode.Function Switching of band S_DCU_2_SAT_SR_BANDMode During Sirius modeKey operation Pressing of SAT keyOutline of functions Sirius band is switched.Function CH Up/DownMode During Sirius modeKey operation Rotation of TUNE keyST-UP,ST-DOWN keyOutline of functions Received channel is changed.Channel Up/Down by 10 digits (SEEK Up/Down)FunctionOutline of functions Received channel is incremented by 10 digits.DisplayDisplayClarion 14/25

8. Media-HUBMedia-HUB operationConnection image diagramFunction No. 44Main body of DCU set Sie-BUS cable Media-HUB (Master microcomputer)Function Channel included in category Up/DownMode During CATEGORY SEARCH modeKey operation Rotation of TUNE keyST-UP,ST-DOWN keyOutline of functions Channel that belongs to the selected category is changed.Function Preset ListMode During Sirius modeKey operation Holding of LIST/BACK keyOutline of functions The list of channels registered to Preset is displayed.Function Calling of PresetMode During Sirius modeKey operation Pressing of Preset key for less than 1.5 secondsOutline of functions Channel that is registered to the corresponding Preset is called.Function Registration of Preset Mode During Sirius modeDuring CATEGORY SEARCH modeKey operation Pressing of Preset key for 1.5 seconds or moreOutline of functions Channel that is registered to the corresponding Preset is called.Key operation Pressing of SCAN key for 1.5 seconds or moreOutline of functions Channel that belongs to the selected category is scanned.FunctionALL channel ScanOutline of functions On-air CH is scanned.FunctionMode During Sirius mode (In non-CATEGORY SEARCH mode)Display of Sirius ID S_DCU_2_SAT_SIRIUS_IDOutline of functionsFunctionAdvisory Message displayS_DCU_2_SAT_SR_ADV_MSGMode During Sirius modeKey operation Without channel selection operation or key operationReceived channel is changed.FunctionMode During Sirius Diag ModeMode During Sirius modeKey operation Holding of multiple keys of LIST/BACK + Preset 6Outline of functions The mode is transited to Sirius Diag Mode.This is the mode to display the diagnosis data of Sirius Module notified by Sirius BB.Diag Up/DownKey operationACC ON (during connection of Media-HUB), Connection of Media-HUB when ACC is ONOutline of functions Media-HUB is connected to the system.FunctionACC ON S_DCU_2_MH_ACC_ONModeModeACC OFF, source mode except for Media-HUB mode, Power OFFKey operation Holding of multiple keys of LIST/BACK + Preset 5Outline of functions The mode is transited to Sirius Ext Diag Mode. In this mode, Sirius BB is externallyconnected to PC, and the performance of Sirius Module is evaluated.FunctionKey operation Pressing of SCAN key for 1.5 seconds or moreMode During XM mode (In non-CATEGORY SEARCH mode)Function Channel included in category ScanModeKey operation Key operation for selecting CH 0SIRIUS ID is displayed.This is the user ID in Sirius broadcast, and is also called Hardware ID.During Sirius modeEXT DIAG MODE OnKey operation >>/SCAN, <</A.S key ONOutline of functionsOutline of functions The condition related to Sirius broadcast is displayed.DIAG MODE On S_DCU_2_SAT_SR_DIAGFunctionDisplayClarion 15/25

Without connection of Media-HUBNon-selectable■ North AmericaWhen only Media-HUB is connected (Media1,2) MEDIA1 →MEDIA2 →MEDIA1 →When connecting XM BB (BAND 3) + Media Hub ( Media1,2 ) XM1 →XM2 →XM3MEDIA1 →MEDIA2 →XM1 →■Europe/AustraliaWhen connecting Media Hub ( Media1,2 ) CD →USB →BTA →AUXMEDIA1 →MEDIA2 →CD →Mode During ON of Browsing function in Media-HUB modeKey operation >>/SCAN, <</A.S keyOutline of functions The set value in the current Operation mode is changed.Change of Operation set valueFunctionKey operation Pressing of Preset 1 to 6 keys (Short pressing or holding)Outline of functions Operation setting is changed.Function Operation setting change function S_DCU_2_MH_OP_SETTINGMode During OFF of Browsing function in Media-HUB modeKey operation Pressing of LIST/BACK key (North America)Pressing of LIST/BACK key (Europe/Australia)Outline of functions The mode is transited to Browsing Mode.Function Browsing Mode On/Off S_DCU_2_MH_BWS_MODE_ONMode Media-HUB modeOutline of functions Fast-forward or fast returningKey operation Pressing of >>/SCAN, <</A.S keyMode During ON of Browsing function in Media-HUB mode, During OFFFunction FF/FB S_DCU_2_MH_FF_FBOutline of functions Track is moved Up or Down.Mode During ON of Browsing function in Media-HUB mode, During OFFS_DCU_2_MH_TRK_UDRotation of TUNE keyST-UP,ST-DOWN keyFunction Track Up/DownKey operation Pressing of SAT key (for North America) or CD/AUX key (for Europe/Australia)Key operation Pressing of SAT key (North America)CD/AUX key (Europe/Australia)Outline of functions The last mode of Media-HUB mode is set to ON.Media-HUB mode BAND is changed.Function Switching of band S_DCU_2_MH_BANDMode XM/Sirius/Media-HUB mode (North America)CD/USB/BT-Audio/AUX/Media-HUB mode (Europe/Australia)Function Media-HUB On S_DCU_2_MH_ONMode Except for XM/Sirius/Media-HUB mode (North America)Except for CD/USB/BT-Audio/AUX/Media-HUB mode (Europe/Australia)Outline of functionsDisplayKey operationClarion 16/25

Explanation of outline of USB/iPod operationConnection image diagramSie-BUS cable Media-HUBMain body of DCU set (Master microcomputer) USBiPod USBMemoryExplanation of outline of Bluetooth AudioConnection image diagramSie-BUS cable Media-HUBBluetoothMain body of DCU set(Master microcomputer)Function Connect USB DeviceWhile selecting MEDIA1 in Media-Hub mode (Other modes and BAND are acceptable.)Key operation N/AOutline of functionsModeUSB Device is connected to Media-HUB.Function Text/StatusMode During selection of MEDIA1 in Media-Hub modeKey operationConnected USB device title and state is displayed.Function USB/iPod ControlMode During selection of MEDIA1 in Media-Hub modeKey operation Refer to details.Outline of functions The playback function of the connected USB Memory/iPod is controlled.Function USB Browsing ModeMode Media-Hub mode: During selection of MEDIA1 - During Browsing ModeKey operation Refer to details.Media-Hub mode: During selection of MEDIA1 - In Browsing ModeKey operation Refer to details.Outline of functions The connected USB Memory is controlled.Function iPod Browsing ModeDuring selection of MEDIA1 in Media-Hub modeKey operation Holding of Preset 1/RPT keyOutline of functions The connected iPod is controlled.Function Media-Hub Software VersionDuring selection of MEDIA2 in Media-Hub modeKey operation N/AOutline of functions Media-HUB Software Version is displayed.Function Pairing Bluetooth AudioBluetooth Audio (BTA) device and Media-HUB are paired.Function Bluetooth Text/StatusMode During selection of MEDIA2 in Media-Hub modeKey operation N/AOutline of functions Connected Bluetooth Audio (BTA) device title and state are displayed.Function Bluetooth ControlMedia-Hub Software VersionMode During selection of MEDIA2 in Media-Hub modeKey operation Refer to details.Outline of functions Media-HUB Software Version is displayed.Bluetooth AudiodeviceMode During selection of MEDIA2 in Media-Hub modeKey operation Holding of Preset 1/RPT keyOutline of functions The playback function of the connected Bluetooth Audio (BTA) device is controlled.FunctionDisplayDisplayOutline of functionsModeModeModeOutline of functionsClarion 17/25

9. Bluetooth AudioDetails of operationsExplanation of display)Explanation of display)Key operationKey operationFunction PauseKey operation Counterclockwise rotation of TUNE/Track rotary keyOutline of functions Back to the top of the track being played or back to the previous trackMode Bluetooth Audio modeOutline of functions Skip to next trackTrack DOWNKey operation Clockwise rotation of TUNE/Track rotary keyMode Bluetooth Audio modeFunction Track UpOutline of functions Connection recognitionKey operation N/AMode Bluetooth Audio modeFunctionA2DP connection and cuttingPlayback is stopped and sound is muted.Function Folder UpMode Bluetooth Audio modeKey operation Pressing of ST-Mute keyMoving to the next FolderFunction Folder DownMode Bluetooth Audio modeKey operation Short pressing of >>/AS keyReturning to the previous FolderFunction RPT changeMode Bluetooth Audio modeKey operation Short pressing of <</SCAN keyRDM changeMode Bluetooth Audio modeMode Bluetooth Audio modePressing of Preset １/RPT key (Left-hand drive), Pressing of Preset 6/RPT key (Right-hand drive)Outline of functions Repeat mode is changed."BT-Audio Setup" Top MenuMode During Setting ModePressing of Preset 2/RDM key (Left-hand drive)Pressing of Preset 5/RDM key (Right-hand drive)Outline of functions Random mode is changed.Key operationSelection of BT-Audio SetupOutline of functions BT-Audio Setup is started.DisplayDisplayFunctionFunctionOutline of functionsOutline of functionsOutline of functionsFunction01'23”1/20Clarion 18/25

Explanation of display)Explanation of display)Explanation of display)Example of screen)Key operationKey operationKey operationFunctionOutline of functionsFunction Initial start of "BT-HF MENU"Function "BT-Audio Setup" Set PasskeyMode During Setting ModeSelect Audio Player is selected in BT-Audio Setup Top Menu."BT-Audio Setup" Pair Audio PlayerMode During Setting ModePair Audio Player is selected in BT-Audio Setup Top Menu.Pairing is executed. By pairing, connection with Bluetooth Audio Player becomes possible.Details of operationsOutline of functions Paired Audio Player is connected with Bluetooth.Function "BT-Audio Setup" Delete Audio PlayerModeFunction "BT-Audio Setup" Select Audio PlayerMode During Setting ModeSelect Audio Player is selected in BT-Audio Setup Top Menu.Outline of functions Paired Audio Player is connected with Bluetooth.10. BT-Hands FreeDuring Setting ModeDelete Audio Player is selected in BT-Audio Setup Top Menu.Outline of functions The registration information of paired Audio Player is deleted.Key operationMode Except for BT-HF Mode, AND 0 Pairing unitKey operation Pressing of Talk Key, pressing of Off-Hook keyVoice CommandOutline of functionsAfter initial start, Guidance language is selected and the operation is transited to the pairing function.*If the operation is started without registering phones, it is regarded as the initial start.N/ADisplayDisplayDisplayDisplayClarion 19/25

FunctionMode Except for BT-HF Mode"BT-HF MENU" Top MenuKey operation Pressing of Off-Hook key (Pressing of Talk Key)Voice Command N/AOutline of functions Menu of the topmost layer in BT-HF ModeFunction "BT-HF MENU" Dial By NameModeKey operation N/A[Top Menu]Voice CommandOutline of functions The registered data associated with Voice Tag is called, and a phone call can be made to the registered data.Dial By NameFunctionMode"BT-HF MENU" Dial By Number[Top Menu]Key operationVoice CommandN/ADial By NumberOutline of functions If the phone number is told, the phone call can be made to the voice-recognized phone number.Function "BT-HF MENU" Speed DialModeKey operation Pressing of Preset1-6[Top Menu]Voice CommandOutline of functions The registered data associated with Speed Dial is called, and the phone call can be made to the registered data.N/AFunction "BT-HF MENU" RedialMode [Top Menu]Key operation Selection of RedialVoice Command RedialOutline of functions The phone call is made or address book is registered from the registration of dial record, or the dial record can be deleted.Function "BT-HF MENU" Call BackMode [Top Menu]Key operation Selection of Call BackVoice Command Call BackOutline of functions The phone call is made or address book is registered from the call register, or the call register is deleted.Function "BT-HF MENU" By VoiceMode [Top Menu]-[Phone Book]-[Add Entry]Key operation Selection of "By Voice"Voice Command By VoiceOutline of functions If the phone number is told, the voice-recognized phone number is registered to the address book.Function "BT-HF MENU" By PhoneMode [Top Menu]-[Phone Book]-[Add Entry]Key operation Selection of "By Phone"Voice Command By PhoneOutline of functions The address book data is transferred from the cell phone by OPP transfer, and registered to the address book.Function "BT-HF MENU" Manual InputMode [Top Menu]-[Phone Book]-[Add Entry]Key operation Selection of Manual InputVoice Command N/AOutline of functions The phone number is input by key operation, and registered to the address book.Function "BT-HF MENU" Call HistoryMode [Top Menu]-[Phone Book]-[Add Entry]Key operation Selection of Call HistoryVoice Command Call HistoryOutline of functions The data is registered to the address book from the call history.Function "BT-HF MENU" List NamesMode [Top Menu]-[Phone Book]Key operation Selection of List NamesVoice Command List NamesOutline of functionsVoice Tag associated with the registered data of the address book is reproduced.The registered data is selected to make phone calls, change Voice Tag, register to Speed Dial, or delete theregistered data.Function "BT-HF MENU" Change NameMode [Top Menu]-[Phone Book]Key operation Selection of Change NamesVoice Command Change NamesOutline of functions Voice Tag associated with the registered data of the address book is changed.Function "BT-HF MENU" Set Speed DialMode [Top Menu]-[Phone Book]Key operation Selection of Set Speed DialsVoice Command Set Speed DialsOutline of functions The registered data is registered to Speed Dial.Clarion 20/25

▲1Function "BT-HF MENU" DeleteMode [Top Menu]-[Phone Book]Key operation Selection of DeleteVoice Command DeleteOutline of functions The registered data is deleted.Function "BT-HF MENU" Delete Speed DialMode [Top Menu]-[Phone Book]Key operation Selection of Delete Speed DialVoice Command Delete Speed DialOutline of functions The registered data of Speed Dial is deleted.Function "BT-HF MENU" Set PINMode [Top Menu]-[Setup Menu]-[Security Menu]Key operation Selection of Set PINVoice Command Set PINOutline of functions PIN Code required for setting/resetting Phone Book Lock is set.Function "BT-HF MENU" Phone Book LockMode [Top Menu]-[Setup Menu]-[Security Menu]Key operation Selection of Phone Book LockVoice Command Phone Book LockOutline of functions Phone Book Lock is set.Function "BT-HF MENU" Phone Book UnlockMode [Top Menu]-[Setup Menu]-[Security Menu]Key operation Selection of Phone Book UnlockVoice Command Phone Book UnlockOutline of functions Phone Book Lock is reset.Function "BT-HF MENU" Pair PhoneMode [Top Menu]-[Setup Menu]-[Phone Setup Menu]Key operation Selection of Pair PhoneVoice Command Pair PhoneOutline of functions Pairing is executed. By pairing, connection between Audio and cell phone becomes possible.Function "BT-HF MENU" Select PhoneMode [Top Menu]-[Setup Menu]-[Phone Setup Menu]Key operation Selection of "Select Phone"Voice Command Select PhoneOutline of functions The phone to be connected is selected among from paired phones, and connected.Function "BT-HF MENU" Change NameMode [Top Menu]-[Setup Menu]-[Phone Setup Menu]Key operation Selection of "Change Name"Voice Command Change NameOutline of functions Voice Tag associated with phones is changed.Function "BT-HF MENU" List PhonesMode [Top Menu]-[Setup Menu]-[Phone Setup Menu]Key operation Selection of List PhonesVoice Command List PhonesOutline of functionsVoice Tag associated with registered phones is reproduced.The registered phone is selected to change Voice Tag, select connected phones, or delete registered phones.Function "BT-HF MENU" DeleteMode [Top Menu]-[Setup Menu]-[Phone Setup Menu]Key operation Selection of DeleteVoice Command DeleteThe pairing state of the paired registered phones is reset.Function "BT-HF MENU" Set PasskeyOutline of functionsMode [Top Menu]-[Setup Menu]-[Phone Setup Menu]Key operation Selection of Set PasskeyVoice Command Set PasskeyOutline of functions Passkey required for registration of BT-Device is set.Function "BT-HF MENU" Guidance VolumeMode [Top Menu]-[Setup Menu]-[System Setup Menu]Key operation Selection of Guidance VolumeVoice Command N/AOutline of functions Guidance Volume is set.Function "BT-HF MENU" LanguageMode [Top Menu]-[Setup Menu]-[System Setup Menu]Key operation Selection of LanguageVoice Command N/AOutline of functions The language type of Guidance is set.Clarion 21/25

▲2▲2▲2▲2▲2▲2▲2▲311. SettingDetails of operationsExplanation of display)List screenAdjustment screenFunction "BT-HF MENU" InitializeMode [Top Menu]-[Setup Menu]-[System Setup Menu]Key operation Selection of "Initialize"Voice Command N/AOutline of functions System is initialized.Function Receipt of callMode BT-HF Menu state, or state except for BT-HF modeKey operation N/AOutline of functions Receiving call condition is notified to users.Function Call on holdMode Receiving of callKey operation Short pressing of On-Hook KeyOutline of functions Call is put on hold.Function Rejection of receivingMode Receiving of callKey operation Holding on On-Hook KeyOutline of functions Receiving of calls is rejected.Function Start of phone callMode Receiving of callKey operation Pressing of Off-Hook KeyOutline of functions The phone call is started.Function Stop of phone callMode Outgoing callKey operation Pressing of Oｎ-Hook KeyOutline of functions The phone call is stopped.Function End of phone callMode SpeakingKey operation Pressing of On-Hook KeyOutline of functions The phone call is ended.Function Transfer　 (From Hands Free state to Private state)Mode SpeakingKey operation Pressing of Oｆｆ-Hook KeyOutline of functions The calling state is transferred to the cell phone.Function Transfer　 (From Private state to Hands Free state)Mode Speaking (Except for BT-HF Mode)Key operation Pressing of Oｆｆ-Hook KeyOutline of functions The call state is transferred from the cell phone to the set.Function Mute stalkingMode SpeakingKey operation Pressing of Talk KeyOutline of functions Mute talking is set to ON or OFF.FunctionAdjustment of Mic LevelMode SpeakingKey operation Pressing of ST-UP / ST-DOWN KeyOutline of functions Mic Level is adjusted. By adjustment, the volume of the receiver is changed.Function Setting Mode OnMode In all modes　 (Except for Power Off and Tel Mode)Key operation Pressing of MENU/ENTER keyOutline of functions Setting screen is displayed.Function Contents of adjustment itemsMode During Setting ModeKey operation -Outline of functions Contents of adjustment itemsDisplayClarion 22/25

12.Camera Rearview-CameraDetails of operationsImage of Rearview-Camera13. Screen OFFDetails of operationsExplanation of display)After decision of Screen OFF in Setting;Function UP/DOWN movement of items in List screenMode List screen During Setting ModeRearview-Camera display is executed.Key operation TUNE/TRACK/CH key rotationOutline of functions UP/DOWN movement of list itemsFunction Decision of items on List screenMode List screen During Setting ModeKey operation Pressing of MENU/ENTER keyOutline of functions List items are decided.Function UP/DOWN of adjustment value on adjustment screenKey operation Vehicle REVERSE signal On　 (I_NR_REVERSE Active)ModeAdjustment screen During Setting ModeMode ・ACC On (Power On/Power Off)Key operation Tune/Folder key rotationDuring Setting ModeKey operation Short pressing of LIST/BACK keyOutline of functions The adjustment value is increased or decreased.Function Setting Mode Back by 1 layerDuring Setting ModeKey operation Holding of Back keyOutline of functions Returning by 1 layer During Setting ModeFunction Reset of Setting ModeMute/Pause During Setting ModeOutline of functions Setting Mode is reset.Function Drive regulation During Setting Mode　 (Except for Camera Mode)During Setting Mode　 (Except for Camera Mode)Key operation Vehicle speed inputOutline of functions The operation is restricted depending on the vehicle drive state (Vehicle speed state).Setting Mode is reset.Function Brightness (Dimmer cancel) OnMode Screen Saver items During Setting ModeKey operationBrightness, Contrast is set to the daytime value.Function Screen OFFMode Brightness OnKey operationFunction Rearview-Camera displayOutline of functionsModeAll modes in ACC ON (Except for camera and Tel Mode)Key operation Decision of Screen OFFOutline of functions The screen is set to OFF.DisplayDisplayOutline of functionsOutline of functionsModeFunctionModeModeV-shaped trackWarningClarion 23/25

13.1 NAVI modeDetails of operationsThe presence of NAVI interruption is judged at the microcomputer universal input port.TEL-MUTE terminal is used for judgment port.14. Screen saverDetails of operationsSetting to load JPEG images, selection of displayed images, and deletion of saved imagesLoading of JPEG imageSetting ModeWith USB storing JPEG data connected, "Screen Saver ⇒Picture Download" is selected in Setting Menu.Outline of functionsSaved image displayRefer to details.The saved image display is reset and operation screen is displayed by operations specified in the details section.Setting of screen saverFunction accrual conditionFunction accrual conditionOutline of functionsReset of saved image display (Operation screen display)Display of saved imageModeDisplay of saved image (Reset of operation screen display)Refer to "Switchable state to saved image" for details.Refer to "Timing to display saved image" for details.If there is no user operation for a certain length of time, the display is changed from the operation screen to the saved image.Outline of functionsFunction Continuous operation of screen OFFMode Screen OFFKey operation Refer to details.Outline of functions The key operation is accepted with the screen kept OFF.Function Reset of screen OFFMode Screen OFFKey operation Refer to details.Outline of functions Screen OFF is reset.Function NAVI mode OnModeAll modes in ACC On (Except for TEL mode and CAMERA mode)Key operation(PD5) Holding of CD/AUX keyOutline of functionsFunction Continuous operation of NAVI modeIt is judged whether NAVI devices are connected to the microcomputer universal input port. Judgment portis common with VTR. VTR-DET terminal is used.　Refer to Subaru_PD5_Setting specification_2-1-9_PinAssign for allocation of Port.The mode is transited to NAVI mode when it is connected.Mode During NAVI modeKey operation Refer to details.Outline of functions The operation is accepted with NAVI mode continued.Function Reset of NAVI modeMode During NAVI modeKey operation Refer to details.Outline of functions NAVI mode is reset.Function Interruption of NAVI soundModeAll modes in ACC ON (Except for TEL mode)FunctionOutline of functionsFunctionModeModeFunction accrual conditionKey operation(PD5)Function accrual conditionOutline of functionsAll conditions for displaying saved image (Refer to "Display of saved image (Reset of operation screen display)".)-JPEG image saved by users is displayed.FunctionAudio sound is muted in connection with TEL－MUTE terminal state.FunctionModeFunctionModeFunction accrual stateOutline of functionsPD5 Audio Garmin GVN53Audio LAudio RAudio MuteOp SpeakerCompositeAudio LAudio ROp SpeakerClarion 24/25

FunctionModeFunction accrual conditionOutline of functionsFunctionModeFunction accrualconditionOutline of functionsDeletion of imageSetting ModeSetting ModeIn the condition at least one JPEG image is saved in ROM, "Screen Saver ⇒Picture Select" is selected inSetting Menu.Among the images saved in ROM, the image displayed in "Saved image display (Operation screen displayreset)" is selected. The condition is switched by selection of Display/Non-display.In the condition at least one JPEG image is saved in ROM, の"Screen Saver⇒Picture Erase" is selected inSetting Menu.JPEG image saved in ROM is selected and deleted.Selection of displayed imageClarion 25/25

Navigation menu