Faurecia Clarion Electronics M502 CAR AUDIO User Manual
Clarion Co Ltd CAR AUDIO Users Manual
UserManual.wiki
>
Faurecia Clarion Electronics
>
M502 User Manual
Users Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![3EnglishM502Front Panel / GeneralitiesFor a longer service life, be sure to read the following cautions.• Do not allow any liquids on the set from drinks, umbrellas, etc. Doing so may damage the internal circuitry.• Do not disassemble or modify the set in any way. Doing so may result in damage.• Do not let cigarettes burn the display. Doing so may damage or deform the body.• If a problem should occur, have the set inspected at your store of purchase.Cleaning the body• Use a soft, dry cloth and gently wipe off the dirt. • For tough dirt, apply some neutral detergent diluted in water to a soft cloth, wipe off the dirt gently, then wipe again with a dry cloth. • Do not use benzene, thinner, car cleaner, etc., as these substances may damage the body or cause the paint to peel. Also, leaving rubber or plastic products in contact with the body for long periods of time may cause stains.USB Port• The USB memory sticks must be recognized as “USB mass storage class“ to work properly. Some models may not operate correctly. Wh en the memori zed da ta is l ost or damaged by any chance, Clarion shall not be liable for any damage. When using an US B memor y stick , we recommend that you backup your data stored on it before using a personal computer etc.• Data files may be broken when using USB memory sticks in the following situation: When disconnecting the USB memory stick or turning the power off during reading data. When affected static electricity or electric noise. Connect/disconnect the USB memory stick when it is not accessed.• Connecting with the computer is not covered.[CONTROL] Knob• Power on (press)• Power off (long press -> rotate it select “POWER OFF“ ->press)• Adjust volume level (rotate)• Toggle the audio source (press)• Previous/Next search (press - left/right )• Select tuner band (press - up)(long press)• BT mode – Terminate call• RADIO mode – No function.• SIRIUSXM mode – Direct search• AUX mode – No function.• USB mode – Search function• iPod mode – iPod menu• PANDORA mode – Station select[ MIC ] Hole • Internal microphone3. CONTROLSOperational PanelNames of Button[CONTROL] [RESET][MIC]INFORMATION FOR USERS:Changes or modifications to this product unapproved by the manufacturer will void the warranty and will violate FCC approval.FCC ID: AX2M502CHINA530-1710kHz 87.9-107.9MHzTHIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:(1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.THIS DEVICE COMPLIES WITH DHHS RULES 21 CFR CHAPTER I SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE.CLARION CO.,LTD.7-2,SHINTOSHIN,CHUO-KU,SAITAMA-SHI,SAITAMA-KEN,JAPANThis product includes technology owned by Microsoft Corporation andcannot be used or distributed without a license from MSLGP.MANUFACTURED:URFPN:127071001378TX-1116B-AQDID NO.: B017789M502](https://usermanual.wiki/Faurecia-Clarion-Electronics/M502/User-Guide-1662212-Page-4.png)
![4EnglishM502Remote Control (RCX003)Notes of remote control usingReplacing the lithium battery of remote control unit.When the range of the operation of the card remote control becomes short or no functions while operating. Replace the battery with a new lithium battery. Make sure the battery polarity replacement is correct.1. Pull out the battery holder while pressing the stopper. 2. Insert the button-type battery with the stamped(+) mark facing upward. Insert the battery holder into the remote control.[SRC/ ] Button• Toggle the audio source• Power on ( short press) / off (long press)[ , ] Buttons• Preset station up / down• Previous / next track• Search (long press)[SCN/PS/AS] Button• Scan play / Preset scan• Auto memory store (long press)[BAND/TOP] Button• MP3/WMA mode – Top play (long press)• SIRIUSXM mode – Select tuner band, quit Replay(Replay mode) / Select category(long press)[ , ] Buttons• Volume up / down[ ] Button• Play / Pause• SirusXM mode - Replay mode[ISR] Button• Recall ISR station stored in memory• Store current station in ISR memory (long press)[DISP] Button• Display switch[RDM] Button • Random play[RPT] Button • Repeat play[MUTE] Button• Mute the volume[1~6] Buttons • [1] Button: Preset station 1. • [2] Button: Preset station 2. • [3] Button: Preset station 3. • [4] Button: Preset station 4. • [5] Button: Preset station 5. • [6] Button: Preset station 6.[SOUND] Button • Sound effect setting(CR 2025)CR 2025[ , ][ISR][RPT][SOUND][RDM][ , ][DISP][1~6] [MUTE][SCN/PS/AS][ ][BAND/TOP][SRC/ ]4. OPERATIONSBasic OperationsNote:• Refer to the diagrams in “3. CONTROLS” when reading this chapter.CAUTIONWhen the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may harm your hearings. Be careful about adjusting the volume.Power on / offNotes:• Start the engine before using this unit.• Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.1. Start the engine. The power button / knob illumination on the unit will light up. Engine ON position2. Press the [CONTROL] knob on the front panel or [SRC / ] button on the remote control to turn on the power under standby mode. The unit goes back to the last status after power on.3. Press and hold the [CONTROL] knob (center long press) on the front panel, and rotate the [CONTROL] knob choose POWER OFF, then press the [CONTROL] knob on the front panel to turn off the power. Or press and hold [SRC / ] button on remote control to turn off the power.Security passwordSet: After power on or reset, long press the [CONTROL] knob to select ADJUST, andpress the [CONTROL] knob (left / right) to select CODE, then press the [CONTROL] knob to set password. Rotate the [CONTROL] knob (left / right) to select a digit, and press the knob to conrm, after input all 4 digit. RESETDelete:Delete the password of operation is the same as setting password.MutePress the [MUTE] button on the remote control to mute the volume from the unit.Note: Doing the operation above again or adjusting volume will release muting.Volume adjustmentTurn the [CONTROL] knob on the front panel.The adjustable range of volume is 0 to 40.CAUTIONWhile driving, keep the volume level at which external sounds can be heard.Playing source selectionPress [CONTROL] knob on the front panel repeatedly to choose desired playing source.Note:• Playing source selection means selecting work mode, such as RADIO mode and AUX mode, etc.Display system timePress the [DISP] button on the remote control to switch the display information, system time and playing source.RESETNote:* When the [RESET] button is pressed,frequencies of radio stations, titles, etc.stored in memory are cleared.](https://usermanual.wiki/Faurecia-Clarion-Electronics/M502/User-Guide-1662212-Page-5.png)
![5EnglishM502At all mode, press and hold [CONTROL] knob (center long press), and rotate the [CONTROL] knob choose ADJUST, then press the [CONTROL] knob to enter system setup. Press [CONTROL] knob (left / right) to select options, rotate the [CONTROL] knob to adjust. PCH MEMO (RADIO/SIRIUSXM mode)Rotate the [CONTROL] knob to choose PCH 1 / PCH 2 / PCH 3 / PCH 4 / PCH 5 or PCH 6, press and hold [CONTROL] knob (center long press) to store it in the memory.CLOCKPress the [CONTROL] knob (right) to choose minute, and rotate the [CONTROL] knob to set minute.Press the [CONTROL] knob (left) to choose hour, and rotate the [CONTROL] knob to set hour.Then long press [CONTROL] knob (center) to conrm the time setting.DX/LO (RADIO mode)Rotate the [CONTROL] knob to choose radio local or distant at RADIO mode.• LO: Only stations with strong signal can be received.• DX: Stations with strong and weak signals can be received.SELECT (BT mode)This ”SELECT” menu is intended to automatically paired by selecting a mobile phone was stored.This unit can store three mobile phones. The mobile phone will be stored in paired order to the unit. The mobile phone can be stored up to three. The fourth mobile phone can not be stored. If you want to store a fourth mobile phone, please delete unwanted mobile phone from ”SELETE” menu.1. Rotate the [CONTROL] knob to choose the pair mobile phone name from the pairing list.2. Press and hold the [CONTROL] knob to conrm.System SetupDELETE (BT mode)1. Rotate the [CONTROL] knob to choose the paired mobile phone name from the pairing list.2. Press and hold the [CONTROL] knob to conrm. DISCON (BT mode)Disconnect currently connected mobile phone.1. Rotate the [CONTROL] knob, mobile phone displays are currently connected.2. Press and hold the [CONTROL] knob to disconnect.PASSWORD (SIRIUSXM mode)Press the [CONTROL] knob to enter old password, rotate the [CONTROL] knob to select a digit, press the [CONTROL] knob (left / right) to move the cursor. Press the [CONTROL] knob to conrm after input all 4 digit. Then input a new 4-digit number as above. (Original password: 0000)LOCK (SIRIUSXM mode)Press the [CONTROL] knob to lock current station, rotate the [CONTROL] the knob to select a digit, press the [CONTROL] knob (left / right) to move the cursor. Long press the knob to conrm after input all 4 digit password.UNLOCK (SIRIUSXM mode)Press the [CONTROL] knob to unlock all locked stations, rotate the [CONTROL] knob to select a digit, press the [CONTROL] knob (left / right) to move the cursor. Press the [CONTROL] knob to conrm after input all 4 digit password.UNSKIP (SIRIUSXM mode)Press and hold the [CONTROL] knob to unskip all channels. AUX SENS (AUX mode)Rotate the [CONTROL] knob to choose AUX input sensitivity LOW, MID or HIGH at AUX mode.MIC SEL (BT mode)Rotate the [CONTROL] knob to choose microphone EXTERNAL or INTERNAL.System SetupMIC GAIN (BT mode)Rotate the [CONTROL] knob to choose Mic gain: 1, 2, 3, 4, 5.You can change the gain of MIC when a telephone partner cannot hear your voice.TONE SEL (BT mode)You can get mobile phone ring tone from the speaker.Rotate the [CONTROL] knob to choose AUTO or INTERNAL.• AUTO:Mobile phone ring tone from the speaker.• INTERNAL:The unit original ring tone from the speaker.AUTO ANS (BT mode)To answer incoming calls automatically.Rotate the [CONTROL] knob to choose AUTO ANS ON or OFF.AUTO CON (BT mode): ON/OFFRotate the [CONTROL] knob to choose AUTO CON ON or OFF.PIN CODEPress the [CONTROL] knob, rotate the [CONTROL] knob to select a digit, press the [CONTROL] knob (left / right) to move the cursor. Press the [CONTROL] knob to conrm.The PIN CODE default setting is “ 0000 “.SCRN SVR: ON/OFFRotate the [CONTROL] knob to choose SCRN SVR (screen saver) ON or OFF.SCROLL: ON/OFFFor track information that is longer than the display panel:When SCROLL is ON, the LCD will display ID3 TAG information cyclely, e.g.: TRACK->FOLDER->FILE->ALBUM->TITLE->ARTIST->TRACK->...When SCROLL is OFF, the LCD will display one of the ID3 TAG information, the default is TRACK, but user can adjust it to other ID3 TAG information by pressing [DISP] button on the remote control.S-CTRL (iPod mode) : ON/OFFRotate the [CONTROL] knob to choose S-CTRL (Simple control) ON or OFF.* Refer to P9.DIMMER: ON/OFFRotate the [CONTROL] knob to choose DIMMER ON or OFF.• ON: LCD dimmer is active when small light of vehicle is turned ON.• OFF: LCD always maximum brightness regardless of the vehicle small light.REAR/S-WRotate the [CONTROL] knob to choose REAR or S-WOOFER(SUB-WOOFER).SW PHASERotate the [CONTROL] knob to choose REVERSE or NORMAL.BEEP: ON/OFFRotate the [CONTROL] knob to choose button beep sound ON or OFF.12/24HRotate the [CONTROL] knob to choose time format: 12 or 24 hours.](https://usermanual.wiki/Faurecia-Clarion-Electronics/M502/User-Guide-1662212-Page-6.png)
![6EnglishM502Press the [C ONTROL] knob to choose SOUND. First press shows current EQ. Rotate the [CONTROL] knob to choose BEAT EQ in this order:OFF -> B-BOOST -> IMPACT -> EXCITE -> CUSTOMTo change CUSTOM setting, and press the [CONTROL] knob (center), then press [CONTROL] knob (right/left) to select EQ effects including: BASS-G -> BASS-F -> BASS-Q -> MID-G -> MID-F -> MID-Q -> TREBLE-G -> TREBLE-F, rotate the [CONTROL] knob to select a value.BASS-G / MID-G / TREBLE-G: (-7)- (+7)BASS-F: 50 / 100 / 200BASS-Q : 0.7 / 1.0 / 1.4 / 2.0MID-F: 500 / 1 K / 2 K Audio SetupMID-Q: 0.7 / 1.0 / 1.4 / 2.0TREBLE-F: 5 K / 10 K / 15 KTREBLE-Q: 0.7 / 1.0 / 1.4 / 2.0Then press the [CONTROL] knob (left / right) to select USER preset including:BALANCE -> FADER -> M-B EX ->HPF(high pass lter) -> LPF(low pass lter) -> S-W VOL (Subwoofer Volume), rotate the [CONTROL] knob to select a value.BALANCE:LEFT 1-7->CENTER->RIGHT 1-7FADER:FRONT 1-7->CENTER->REAR 1-7M-B EX: ON/OFFHPF: THROUGH/60/90/120LPF: THROUGH/60/90/120SUBW VOL: (-6)-(+6)Radio OperationsRadio OperationsSelect tuner as playing sourcePress the [CONTROL] knob or [SRC / ]button on the remote control to switch to the RADIO source. Select one radio bandPress the the [CONTROL] knob (up long press) on the panel or [BAND/TOP] button on the remote control to select one radio band among FM1, FM2, FM3 and AM.Manual tuningDuring manual tuning, the frequency will be changed in steps.Press [CONTROL] knob (left/right) on the panel or [ , ] buttons on the remote control to tune in a higher / lower station.Auto tuningPress and hold [CONTROL] knob (left/right) on the panel or [ , ] buttons the remote control to seek a higher / lower station.To stop searching, repeat the operation above or press other buttons having radio functions.Note:When a station is received, searching stops and the station is played.Preset scan Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. 1. Press the [SCN/PS/AS] button on the remote control. 2. When a desired station is tuned in, press the [SCN/PS/AS] button on the remote controlagain to continue receiving that station. Note:Be careful not to press and hold the [SCN/PS/AS] button, otherwise the auto store function is engaged and the unit starts storing stations. Auto storeOnly stations with sufcient signal strength will be detected and stored in the memory.Press and hold the [SCN/PS/AS] button on the remote control to start automatic station search.To stop auto store, press other buttons having radio functions.Notes:1. After auto store, the previous stored stations will be overwritten.2. The unit has 4 bands, such as FM1, FM2, FM3 and AM. FM3 and AM can store by AS function. Each bands can store 6 stations, M502 can store 24 stations in total.Manual storeWhen one expected radio station has been detected, press and hold number button on the remote control 1-6 to store it in the memory.Recall the stored stationsPress one numeric button among 1 to 6 on the remote control or on the panel to select the corresponding stored station.Local seekingWhen LOCAL seeking is on, only those radio stations with strong radio signal could be received.Refer to System Setup page 5.Note:The number of radio stations that can be received will decrease after the local seeking mode is on.SiriusXM Satallite Radio OperationsDisplaying the Identication (ID) CodeBefore you listen to satellite radio, you must subscribe to the service using the SiriusXM Radio ID number. 1. Press [SRC / ] button to activate SiriusXM-mode.2. Press the [CONTROL] knob (left/right) to select channel “0”. The unit displays Radio ID.Notes:1. The Radio ID is located on the bottom of the SiriusXM Connect Vehicle Tuner.2. Please note that the SiriusXM Radio ID does not include the letters I, O, S or F.3. Activate the SiriusXM Connect Vehicle Tuner using one of the two methods below: • Online: Go to “www.siriusxm.com/activatenow” and choose ACTIVATE RADIO. • Phone: Call 1-800-XM-RADIO (1-800-967-2346). Storing Channel Presets1. Press [BAND/TOP] button on the remote control or long-press [CONTROL] (up) on the front panel to select the desired band you want to store the preset in. There are 3 Satellite Radio Preset bands. Each press of [BAND/TOP] button on the remote control changes the band: SXM1 -> SXM2 -> SXM3 -> SXM12. Tune to the desired channel and then press and hold one of the preset buttons (1 through 6) on the remote control to store the channel. 3. Repeat the procedure to store up to 5 other channels on to the same band.Note:• A total of 18 channels can be stored in the preset memory, 6 channels for each band (SXM1,SXM2 and SXM3).Tuning Channels using Presets1. Press [BAND/TOP] on the remote control to select the desired band of Presets you wish to access.2. Press [CONTROL] knob (up/down) to the preset buttons (1 through 6) that has your desired Satellite Radio channel stored in memory.Category Browsing1. Long-press and hold [BAND/TOP] on the remote control to activate the Category Browsing mode.2. Rotate [CONTROL] knob to select desired category.](https://usermanual.wiki/Faurecia-Clarion-Electronics/M502/User-Guide-1662212-Page-7.png)
![7EnglishM5023. Press [CONTROL] knob (left/right) to select desired channel within the selected Category. You can see channel name, channel number, artist, title or content by pressing [DISP] on the remote control.4. Press [CONTROL] knob to tune to selected channel.Note:• If no operation is performed for 10 seconds, the Category Browsing mode is canceled.Artist & Song AlertsWhile listening to SiriusXM Satellite Radio, you can be alerted when your favorite songs or artists are playing on other channels. The radio will display an Alert message when a matching artist or song is found on another channel. Then you can choose if you want to tune to that favorite or you can ignore it and stay on your current channel. Information on setting up the Artist and Song alerts is described below.1. While listening to favorite song, short-press [RPT] button on the remote control to add the artist or long-press [RPT] on the remote control button to add the song to the “Artist & Song Alerts” list. 2. Rotate [CONTROL] knob and select “YES”, and press [CONTROL] knob to store item.3. Rotate [CONTROL] knob and select “NO”, and press [CONTROL] knob to quit.4. Press and hold [CONTROL] knob (center long press), and rotate the [CONTROL] knob to choose ADJUST, then to choose the SEARCH, and rotate [CONTROL] knob to select “ALERT LIST”. Rotate and press [CONTROL] knob to select desired alert item. Then select “ON” to activate alert, “OFF” to deactivate or “DELETE” to delete this item. (press and hold [CONTROL] knob) You can also activate and deactivate Alert function in System Setup menu.Notes:• You can store up to 50 items for Artist & Song Alerts. “XU(sed)/YE(mpty)” is displayed when the new item is stored. X is the total number of song titles or artist names stored in memory, and Y is the total number memory locations still available for storage. • If either the ar tists or s ong t itle is no t available, “NO SONG” or “NO ARTIST” will be displayed.• If you try to store item when memory is full, “MEMORY FULL” is displayed. If you want to store another, please delete exsisting alert item.Receiving and Tuning to an AlertWhenever a stored artist or song is playing on another channel alert message, “ART ALERT” or “SNG ALERT” appears on the unit display.To tune to artist or song identied by the alert, press [CONTROL] knob.Notes:• If no operationg is performed for 5 seconds,the unit returns to normal mode.• Artist name and Song title which you have stored and which are currently playing will be displayed in category called “MY MUSIC” in search mode.My Music searchYou can access the channels which is broadcasting the contents in the activated Alert list.1. Press and hold [CONTROL] knob (center long press), and rotate the [CONTROL] knob to choose ADJUST, then to choose the SEARCH, and rotate [CONTROL] knob to select “MY MUSIC LIST”.2. Press [CONTROL] knob to display matched songs which are currently broadcasted3. Rotate [CONTROL] knob to select desired song, and press [CONTROL] to tune to that channel.Note:• If there is no matched songs broadcasted, it displays “MEM EMPTY”. Replay functionThe Replay feature allows you to pause, rewind, and replay up to 30 minutes of live SiriusXM Satellite Radio.1. While listening to a SiriusXM channel, press [ ] on the remote control to enter Replay mode. The display will show “PAUSE” when entering this mode.2. Press and hold [CONTROL] knob (down short press) or press [ ] button to resume playback of the stored audio from the point at which it was paused. During playback,the SiriusXM Tuner will continue to store the channel audio until you exit the Replay mode.During REPLAY playback:• Fast rewind: Press and hold [CONTROL] knob (left).• Fast forward: Press and hold [CONTROL] knob (right).• Returning to the beginning of the current song: Press [CONTROL] knob (left). (If you press [CONTROL] knob (left) in the rst 2 seconds of a song, you return to the beginning of the previous song.)• Advancing to the beginning of the next song: press [CONTROL] knob (right).3. Long-press [BAND/TOP] to nish Replay mode.Notes:• If you continue to press [CONTROL] knob (right) until the end,the Replay mode is canceled, and the unit will change to live SiriusXM radio mode. • If you change channels while in Replay mode,the unit will exit Replay mode to live Satellite mode and clear the Replay memory. • Replay mode is being kept when you change the source other than SiriusXM mode.iTunes song taggingWith iTunes song tagging, you can tag songs you hear while listening to SiriusXM Satellite Radio. The tagging information is saved in your radio until you connect your iPod or iPhone and then the tagging information is transferred to your iPod/iPhone. When your iPod/iPhone to iTunes, you will then be able to preview and purchase the song that you heard while listening to SiriusXM Satellite Radio.Information on using the iTunes song tagging feature is described below.1. A song may be tagged while listening to a SiriusXM channel if the display shows the “TAG” icon.2. Press [ISR] button on the remote control while the desired song is playing.3. When completed, “STORED TAG X OF 64” is displayed. X means the number of tag stored.Notes:• During tagging, the iPod/iPhone takes priority to save the tag information.If no iPod/iPhone is connected, the tag information is saved to this unit. • This unit can store up to 64 pieces of tag information. When the memory of the unit is full, “MEMORY FULL” may be displayed. • When iPod/iPhone that doesn’t support the tagging function is connected, “TRANSFER FAIL” may be displayed.• If there is stored tag information on the unit, when an iPod/iPhone supporting the tag function is connected, the stored tag information will be transferred to iPod/iPhone automatically.• If tag information already exists, “ALREADY TAGGED” will be displayed when you try to tag information again.• Tagging may be canceled by changing the frequency or station.• If a song is tagged and the remaining storage volume of the connected iPod/iPhone is sufcient to hold the song’s tag information, it will be saved on the iPod/iPhone.Changing the DisplayText information, such as the channel name, artist name/feature, song/program title and content is available with each SiriusXM channel. The unit can display this text information as SiriusXM Satallite Radio Operations SiriusXM Satallite Radio Operations](https://usermanual.wiki/Faurecia-Clarion-Electronics/M502/User-Guide-1662212-Page-8.png)
![8EnglishM502SiriusXM Satallite Radio Operationsexplained below.1. In SiriusXM mode, press [DISP] button on the remote control. Each time you press this button, the display changes as shown below. Band/Channel number/channel name => Artist Name => Song Title=> Content Info => Category Name => Clock => Band/Channel number/channel name* If there is no text information,nothing will be displayed.Parental Lock / UnlockThe SiriusXM Parental Control feature allows you to control access to channels that you consider inappropriate for younger listener.When enabled, the Parental Control feature requires you to enter a password to tune to the locked channels. Information on setting up the password, setting up the channels to be locked, and the method to access the locked channels is described below.1. Long-press [CONTROL] knob and select ADJUST, then press [CONTROL] knob to enter and press [CONTROL] knob (right) to select “PARENTAL PASSWORD”. Press [CONTROL] knob to change password. Enter old password, new password. To enter code, rotate [CONTROL] knob to decide number and [CONTROL] knob (left/right) to select digit. Each time you need to press and hold [CONTROL] knob to confirm password. (Original password is “0000”, after input four numbers, then long-press the [CONTROL] knob)2. Long-press [CONTROL] knob and select ADJUST, then press [CONTROL] knob to enter and press [CONTROL] knob (right) to select “LOCK CH” and press [CONTROL] knob to start to lock channel. You will be asked to input password. Enter password an d “ LOCK” will b e displayed i f it is successful.3. Long-press [CONTROL] knob and select ADJUST, then press [CONTROL] knob to enter and press [CONTROL] knob (right) to select “UNLOCKCH”. Enter password and you can unlock the channel.4. For accessing the locked channels, select channel by “DIRECT SELECT”. Press and hold [CONTROL] and select “DIRECT SELECT” by pressing [CONTROL] knob. Input desired locked channel (need to input 3 digit) and input password, then you can tune to that locked channel.Pausing play1. Press the [ ] button on the remote control to pause play. “PAUSE” appears in the display.2. To resume MP3/WMA play, press the [ ] button on the remote control again.Selecting a trackTrack-up1. Press the [CONTROL] knob (right) on the panel or [ ] button on the remote control to move to the beginning of the next track.2. Each time you press the [CONTROL] knob (right) on the panel or [ ] button on the remote control, the track advances to the beginning of the next track.Track-down1. Press the [CONTROL] knob (left) on the panel or [ ] button on the remote control to move back to the beginning of the current track.2. Press the [CONTROL] knob (left) on the panel or [ ] button on the remote control twice to move back to the beginning of the previous track.Fast-forward/Fast-reverseFast-forwardPress and hold the [CONTROL] knob (right) on the panel or [ ] button on the remote control.Fast-reversePress and hold the [CONTROL] knob (left) on the panel or [ ] button on the remote control.* For MP3/WMA USB device, it takes some time until the start of searching and between tracks. In addition, some errors may occur in the play time.Folder SelectThis function allows you to select a folder containing MP3/WMA files and start playing from the rst track in the folder.1. Press and hold [CONTROL] knob (up) on the panel. Press and hold [CONTROL] knob (up) on the panel to move the next folder. 2. To select a track, press the [CONTROL] knob (right / left) on the panel or [ , ]button on the remote control.Search Function1. Press the [CONTROL] knob (up) to enter FOLD SCH mode, and press [CONTROL] knob (center) to comfirm, then rotate [CONTROL] knob to select the folder list search mode.2. Rotate the [CONTROL] knob to select a folder.3. Press the [CONTROL] button (center) to enter the le list search mode. And then the track list appears in the display.4. Turn the [CONTROL] knob to select a track.5. Press the [CONTROL] knob (center) to play.* When play back MP3 / WMA file, this function is performed in the current folder.Top functionThe top function resets the USB player to the rst track of the USB device. Press and hold the [ CONTROL ] knob (down) to play the rst track (track No. 1) on the USB device.1. Insert a USB device into the rear of the unit USB cable. When connecting a USB device, the unit will read the les automatically.2. To remove the USB device, you should rst select another source or turn off the power, in order to avoid damaging the USB device. Then take off the USB device. Move the cover to the right.USB Operations](https://usermanual.wiki/Faurecia-Clarion-Electronics/M502/User-Guide-1662212-Page-9.png)
![9EnglishM502* In case of MP3/WMA, the rst track of the current folder will be played.Other various play functionsScan playThis function allows you to locate and play the rst 10 seconds of all the tracks recorded on a USB.Press the [ SCN/PS/AS ] button on the remote control to perform scan play.Repeat playThis function allows you to play the current track repeatedly or play a track currently being played in the MP3/WMA folder repeatedly.1. Press the [ RPT ] button on the remote control once or more until “TRK RPT” appears on the display to perform repeat play, and “RPT” segment lights on. USB Operations2. For MP3/WMA files, press [ RPT ] button on the remote control repeatedly until “FOLD RPT” appears on the display for folder repeat play.3. Press [ RPT ] button on the remote control repeatedly until “RPT OFF” appears on the display to cancel repeat playback, and “RPT” segment goes o. Random playThis function allows you to play all tracks recorded on a USB device in a random order.Press the [ RDM ] button on the remote control to perform random play.iPod & iPhone OperationsConnectConnect your iPod or iPhone to the USB slot via CCA-748 cable.When connecting a device, the unit will read the files automatically. The track information display on the screen once playback start.MENUIn the S-CTRL OFF mode, press the [CONTROL] knob (up), rotate the knob select “MUSIC” or “VIDEO”.Select “MUSIC”, press the [CONTROL] knob, then rotate the [CONTROL] knob to show PLAY LISTS / ARTISTS / ALBUMS / GENRES / SONGS / COMPOSERS, then press the [CONTROL] knob to conrm. Select “VIDEO”, press the [CONTROL] knob, then rotate the [CONTROL] knob to show MOVIES / MUSIC VIDEO / TV SHOWS / VIDEO PODCASTS / RENTALS, then press the [CONTROL] knob to conrm. Note:• In case of VIDEO Playback, CCA-748 cable and monitor (sold separately) are required.• VIDEO MENU item is different by the model of connected iPod and language setting.MonitoriPod & iPhone OperationsRepeat playThis function allows you to play the current track repeatedly or play all tracks in your iPod/iPhone repeatedly.1. Press the [RPT] button on the remote control once or more until “RPT ON” appears on the LCD to perform repeat play.2. Press [RPT] button on the remote control repeatedly until “RPT OFF” appears on the LCD to cancel repeat playback. Random playThis function allows you to play all tracks in a random order.1. Press the [RDM] button on the remote control once or more until “RDM ALBUM” appears on the LCD for album random play.2. Press the [RDM] button on the remote control once or more until “RDM SONG” appears on the LCD to perform random play.3. Press the [RDM] button on the remote control once or more until “RDM OFF” appears on the LCD to cancel random playback. Setting iPod simple control modeUse this function if you wish to operate through your iPod connected to this unit via the USB cable.* The factory default setting is “ OFF “.1. Press and hold [CONTROL] knob (center), and rotate the [CONTROL] knob choose ADJUST, then press the [CONTROL] knob (center) to enter system setup. 2 Press the [CONTROL] knob (left / right) to select “ S-CTRL“. 3. Rotate the [CONTROL] knob to select “ ON “ or “ OFF “ . • ON: Operations are made through your iPod. • OFF: Operations cannot be made through your iPod.Notes:• When performing iPod operations using simple control mode, make the operations slowly. If repetitive operations are performed too quickly, unforeseen errors may occur.• When performing iPod operations using simple control mode, please do not operate the iPod and the unit at the same time, otherwise there may be unexpected event happened.• Some iPod models do not support this function. Consult your nearest Clarion dealer or website to confirm which models do not support this function. iPod menu alphabet searchThis function searches the subfolders for desired alphabetical letters.1. Press the [CONTROL] knob (up), and rotate [CONTROL] knob to select the iPod menu mode.2. Rotate the [CONTROL] knob to switch between categories. MUSIC: PLAYLISTS, ARTISTS, ALBUMS, GENRES, SONGS, COMPOSERS VID EO : M OVIES , M USIC VIDE OS, T V SHOWS VIDEO PODCASTS, RENTALS3. Press the [CONTROL] knob. (The contents of the category are displayed.)4. Press and hold the [CONTROL] knob (down).5. Rotate the [CONTROL] knob to select the desired letter to search.6. Press the [CONTROL] knob to perform search.Listening to PANDORAYou can listen to PANDORA internet radio by connecting an iPod/iPhone that has PANDORA Application already installed.To start streaming, connect the iPod/iPhone with PANDORA already launched. When the unit displays “PLEASE LAUNCH PANDORA APPLICATION ON MOBILE DEVICE” in PANDORA mode, please launch the PANDORA Application by operating the iPod/iPhone connected.1. Press the [CONTROL] knob (up) to enter FOLD SCH mode.](https://usermanual.wiki/Faurecia-Clarion-Electronics/M502/User-Guide-1662212-Page-10.png)
![10EnglishM502Bluetooth OperationsThe Bluetooth allows you to utilize your car’s built-in audio system for wireless mobile phone or music handsfree communication. Some Bluetooth mobile phones have the audio features, and some portable audio players support Bluetooth feature. This system can play audio data stored in a Bluetooth audio device. The car stereo with Bluetooth will be able to retrieve phonebook contacts, received call, dialed call, missed call, incoming calls, outgoing call and listen to music.Notes:• Leaving it exposed to high temperatures or direct sunlight can cause distortion or discoloration which may result in a malfunction.• This system will not operate or may operate improperly with some Bluetooth audio players.• Clarion cannot guarantee the compatibility of all mobile phones together with unit.• Audio playback will be set to the same volume level as set during telephone call. This might cause problems, if extreme volume level is set during telephone call.Handsfree Operations Pairing1. Turn on Bluetooth function of your mobile phone.2. Enter mobile phone’s Bluetooth setup menu.3. Search for new Bluetooth devices.4. Select M502 from the pairing list on the mobile phone.5. Enter “0000” as the password (The password default setting is “ 0000 ”).6. After pairing successfully, the unit will enter Bluetooth mode automatically, and “BLUETOOTH CONNECTED” will appear on the LCD.Making a callOperation from Bluetooth menuPress the [CONTROL] knob to switch the source to “BLUETOOTH”. • Dial NumberPress and hold the [CONTROL] knob (center) choose ADJUST, then rotate the [CONTROL] knob select CALL LST.1. Press the [CONTROL] knob.2. Rotate the [CONTROL] knob on the front panel to switch: DIAL NUMBER / DIALLED CALL / MISSED CALL / RECEIVED CALL / MEMORY PHONEBOOK / SIM PHONEBOOK 3. Press the [CONTROL] knob to conrm the selection, “WAITING” will appear on the LCD.4. Press the [CONTROL] knob to dial.5. Press the [CONTROL] knob (right) to terminate call.• Dialled/Missed/ Received Call HistoryYou can search any Dialled/Missed/Received Call History.1. Rotate the knob to select “DIALED CALL”, “MISSED CALL” or “RECEIVED CALL”.2. Press the knob to enter the selected call history.3. Rotate the [CONTROL] knob to scroll the contacts.4. When the contact name or mobile phone No. is displayed, press the [CONTROL] knob (center) to call the mobile phone No. of that contact.* Press the [CONTROL] knob (right) to end the call.• Call from PhonebookUser can search the contact name in the phonebook and make call.1. Rotate the [CONTROL] knob to select “SIM PHONE BOOK” or “MEMORY PHONE BOOK“ .2. Press the [CONTROL] knob (center) to enter the selected phonebook.3. Rotate the [CONTROL] knob to scroll the contacts.4. When the contact name is displayed, press the [CONTROL] knob (center) to call the mobile phone No. of that contact.* Press the [CONTROL] knob (right) to end the call.Selecting a station from listRotate the [CONTROL] knob to select ”BY DATE” or ”A-Z” and press the [CONTROL] knob to conrm.• BY DATE: List in an created date order• A-Z: List in an alphabetical orderGo to next station or previous station(an alphabetical order)Press the [CONTROL] knob (right) on the panel or [ ] button on the remote control to go to next station.Press the [CONTROL] knob (lift) on the panel or [ ] button on the panel or remote control to go to previous station.Thumbs up/down1. Press the [RDM] button on the remote control for the thumbs up.2. Press the [SCN] button on the remote control for the thumbs down.Notes:• You can personalize your stations by “thumbs up” or “thumbs down”.• PANDORA limits the number of thumbs down allowed on their service. If you attempt to thumbs down songs beyond the limit, the current song continues to playback.BOOKMARK artist or songPress the [RPT ] buton on the remote control to Bookmark artist. Press the [RPT ] button on the remote control to Bookmark current artist of the song.SkipPress the [BAND/TOP] button on the remote control for the next song in station.Note:• PANDORA limits the number of skips allowed on their service. If you attempt to skip songs beyond the limit, ”SKIP LIMIT” is displayed.Play/PausePress the [ ] button on the remote control for play/ pause.iPod & iPhone Operations](https://usermanual.wiki/Faurecia-Clarion-Electronics/M502/User-Guide-1662212-Page-11.png)
![11EnglishM502• Answering a callYou can answer an incoming call by pressing the [CONTROL] knob.* Press the [CONTROL] knob (right) to reject an incoming call.Audio Streaming OperationsWhat is audio streaming?Audio streaming is a technique for transferring audio data such that it can be processed as a steady and continuous stream. Users can stream music from their external audio player to their car stereo wirelessly and listen to the tracks through the car’s speakers. Please consult your nearest Clarion dealer for more information on the product of wireless audio streaming transmitter offered.CAUTIONPlease avoid operating your connected mobile phone while audio streaming as this may cause noise or sound choppy on the song playback.Audio streaming may or may not resume after telephone interrupt as this is dependent on mobile phone.System will always return to Radio mode if audio streaming is disconnected.Note:Be sure to read the chapter “Pairing” before proceeding.Play / Pause a track1. Push the [CONTROL] knob (down) to pause audio playback.2. To resume audio playback, push the [CONTROL] knob (down) again.Selecting a trackTrack-up1. Press the [CONTROL] knob (right) to move to the beginning of the next track.2. Each time the [CONTROL] knob (right) is pressed, playback proceeds to another track in the advancing direction.Bluetooth OperationsTrack-down1. Press the [CONTROL] knob (left) to move to the beginning of the previous track.2. Each time the [CONTROL] knob (left) is pressed, playback proceeds to previous track in the reverse direction.Note:Playing order will depend on Bluetooth audio player. When [CONTROL] knob (left) is pressed, some A2DP devices will restart the current track depends on the duration of playback.During music streaming playback, “A2DP” will be shown on the display. Information about tracks (e.g. the elapsed playtime, songtitle, etc.) cannot be displayed on this unit. When A2DP device is disconnected, “DISCONNECT” will be shown on the displayand return to previously selected audio source. Some Bluetooth audio players may not have play / pause synchronized with this unit. Please make sure both device and main unit are in the same play / pause status in BT MUSIC mode.Press the [CONTROL] knob on the panel or [SRC/ ] button on the remote control once or more to select “AUX”.AUX is just for audio content with 3.5mm Jack connector plugged into audio-in socket on the front panel on the right of USB slot.AUX Input sensitivity setting1. Press and hold the [CONTROL] knob .2. Turn the [CONTROL] knob to select “AUX SENS”.3. If the output level of connected external audio player is “HIGH”, rotate the [CONTROL] knob and choose “LOW”. And if the output level is “LOW”, choose “HIGH”.AUX Operations](https://usermanual.wiki/Faurecia-Clarion-Electronics/M502/User-Guide-1662212-Page-12.png)
![12EnglishM5025. TROUBLE SHOOTINGProblem Cause MeasureUnit can not power on.Unit fuse blown. Replace with new fuse of correct rating.Car battery fuse blown. Replace with new fuse of correct rating.Unit can not power on.Nothing happens when buttons are pressed.Display is not accurate.The microprocessor has malfunctioned due to noise, etc.Turn o the power.Press the [RESET] button with a thin rod.Note:When the [RESET] button is pressed, turn othe ACC power.** When the [RESET] button is pressed,frequencies of radio stations, titles, etc. stored in memory are cleared.No/low audio output.Improper audio output connection. Check wiring and correct.Volume set too low. Increase volume level.Speakers damaged. Replace speakers.Heavily biased volume balance. Adjust the channel balance to center position.Speaker wiring is in contact with metal part of car. Insulate all speaker wiring connections.Poor sound quality or distortion.Speaker power rating does not match unit. Replace speakers.Wrong connections. Check wiring and correct.Speaker is shorted. Check wiring and correct.Unit resets itself when engine is o.Incorrect connection between ACC and Battery. Check wiring and correct.USB DevicesProblem Cause MeasureUSB device cannot be inserted.The USB device has been inserted with wrong direction.Reversing the connection direction of the USB device, try it again.The USB connector is broken. Replace with a new USB device.USB device is not recognized.The USB device is damaged. Disconnect the USB device and reconnect. If the device is still not recognized, try replacing with a different USB device.Connectors are loose.No sound heard with the display “No File” shown.No MP3/WMA le is stored in the USB device. Store these les properly in the USB device.Sound skips or is noisy.MP3/WMA les are not encoded properly. Use MP3/WMA les encoded properly.GENERALBluetoothProblem Cause MeasureCannot pair the Bluetooth enabled device with the car audio system.The device does not support the proles required for the system. Use another device to connect.The Bluetooth function of the device is not enabled.Refer to the user manual of the device for how to enable the function.The audio quality is poor after connection with a Bluetooth-enabled device.The internal microphone gain is not set correctly.Adjust the gain of the internal microphone in System Setup.The external microphone is not set correctly nor properly positioned.Adjust the gain and position of the external microphone.For example, stick the microphone onto the dashboard so it is close to the driver. SiriusXM Advisory Messages Message Description CHEK TUNER Check the SiriusXM tuner connection on the back of the unit to ensure that its correctly connected. CHK ANTENAEnsure the SiriusXM antenna cable is connected to the SiriusXM tuner correctly. Check the SiriusXM antenna wire for breaks or sharp bends. Replace the antenna if necessary. Press RESET located….. If the message remains, the antenna may have been damaged. NO SIGNAL The vehicle must be outside, and the antenna must have a clear view of the southern sky.The magnetic antenna must be mounted on the outside of the vehicle for the best reception.CHAN UNSUB This channel is not included in your SiriusXM subscription plan. Call 1-800-XM-RADIO (1-800-967-2346) to subscribe. CH UNAVAILThis channel is not a valid SiriusXM channel.The channel number has been entered incorrectly, or the channel was removed from the SiriusXM channel lineupCH LOCKEDThe selected channel has been locked by the parental controls, or a mature channel has been selected. A prompt to enter the unlock code will appear. Enter the unlock code as described on page 8. SUBSCRIPTN UPDATEDAn update to your SiriusXM subscription has been received by the SiriusXM tuner. Press any button to continue. 6. ERROR DISPLAYSDisplay Cause MeasureERROR 2 Do not support iPod & iPhone. Change another device.* The head unit will return to RADIO mode.If an error occurs, one of the following displays is displayed. Take the measures described below to solve the problem.If an error display other than the ones described above appears, press the [RESET] button. If the problem persists, turn off the power and consult your store of purchase.* When the [RESET] button is pressed, frequencies of radio stations, titles, etc. stored in memory are cleared.](https://usermanual.wiki/Faurecia-Clarion-Electronics/M502/User-Guide-1662212-Page-13.png)
