Ewig Macao Commercial Offshore 001H22M Wireless Remote Sensor User Manual 683F33

Ewig Industries Macao Commercial Offshore Limited Wireless Remote Sensor 683F33

User Manual

AEBFCGDSLIDESLIDE(HANG) (STAND)°C °F TXRF REMOTE SENSORRF 433Mhz Wireless Remote Sensor 001H22A. LCDDisplays temperature and humidity in toggleB. LED indicatorFlashes when the remote unit transmits a readingC. °C/°F slide switchSelection Centigrade (°C) or Fahrenheit (°F)D. T XPress once to re-transmit manually. Press and hold to clear the TX ID and start re-registrationE. Battery compartmentAccommodates two AAA-size batteriesF. Battery doorG. Removable table stand with wall-mount holeTo enable the remote unit on a flat surface and support it in wall-mounting.During the 3 minutes when the home receiver is seeking for sensor registration signal, remove the bracket stand, andbattery cover. Insert 2 pieces of AAA batteries into the battery compartment according to polarity markings. The channel1 icon and the temperature/humidity will appear on the LCD of the receiving unit.-If the registration is sucessful, a beep confirmation will be heard. If not, check the AAA batteries, repeat the registrationprocedure again, or hold the TX button for 2 seconds to send the registration signal. Then, close the battery door.-To register sensor 2 and sensor 3: Press and hold the “Channel” button for 2 seconds on the home receiver to select thechannel. Insert batteries for sensor 2, the channel 2 icon and temperature will appear on the LCD of the receiving unit.Follow the same procedure to register sensor 3.Note:• The sensor will transmit the registration code automatically once the batteries are inserted. If the batteries havebeen already inserted into the battery compartment , hold the TX 2 seconds for registration.• If the “---” icon appears on the outdoor remote sensor, move the unit closer to the receiving unit. Repeat theregistration procedure again.• The channels will be automatically assigned to the sensors respectively in sequence of registration.However, if all sensors are already registered, you can perform the registration again by selecting the desired channeland hold “Channel” for 2 seconds to enable the receiving unit to receive RF temperature signals.For wireless remote sensor with detachable probe onlyIf measurement of water, soil, or other liquid is desired, open the cover of the plug hole at the side of the sensor andinsert the probe plug. (optional)SpecificationRecommended remote sensor operating range:Sensor with LCD display : +32°F to +122°F (0°C to +50°C)Detachable outdoor probe : -58°F to +158°F (-50°C to +70°C)Transmission range : Maximum 30 meters, open areaBatteries : AAA size x 2 pcs. (remote sensor)Battery life : 6 monthsTransmission frequency : 433.92 MHzThis device could be sensitive to electrostatic discharge, If electrostatic discharge or malfunctioning occurs, please reset thisunit.“Modifications not authorized by the manufacturer may void users authority to operate this device”Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device mustaccept any interference, including interference that may cause undesired operation of the device.

Navigation menu