Etiger Digital Technology ES-RC1 Remote Control User Manual

Shanghai Etiger Digital Technology Co., Ltd. Remote Control Users Manual

Users Manual

EN Box Content 1 x Remote Control1 x User Manual Home ModeArmPanicDisarmLED indicatorBefore Using for the First Time Register the remote control in the alarm systemSwitch to Connection Mode on the control panel. Then press any key on the remote control. The control panel beeps once: the remote control is registered. If you hear two beeps, the remote control has already been connected.www.etiger.comES-RC1Remote ControlUsage Key Operation FunctionArm Arms the security systemDisarm Disarms the security systemHome ModeArms all the sensors but the ones in zone A. Sensors in zone A will not trigger the alarm (Home Mode).PanicTriggers the alarm regardless the status of the alarm system. The control panel dials the stored phone numbers. + Arm(in Mute mode) Arms the system silently + Disarm(in Mute mode) Disarms the system silentlySpecications Power Supply:DC 3V (CR2025 button battery x1)Operation current:≤7 mATransmission distance:≤ 80 m (in open area)Radio-frequency:315MHz (±75KHz)Housing material:ABS plasticOperating conditions:Temperature: -10°C ~ +55°CRelative Humidity: ≤80% (non-condensing)Dimensions:57 x 31 x 11 mmLED indications Blinks onceSends transmitting signalLow light Low battery, replace the battery immediatelyStandards This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities. Electronic products not included in the selective sorting process are potentially dangerous for the environment and human health due to the presence of hazardous substances.In compliance with European laws.This product was designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and of the Council on the restriction of use of certain hazardous substances in electrical and electronic equipment (RoHS Directive - RoHS) and is deemed to comply with the maximum concentration values set by the European Technical Adaptation Committee (TAC).Manufactured in China.Images, illustrations and text are non-contractual. ETIGER and the ETIGER logo are registered trademarks and the property of ETIGER.Copyright © 2014 ETIGER. All rights reserved.ETIGER EUROPERue de la Loi, 25, 7100 La Louvière, Belgiqueservice@etiger.comThis user manual is available in other languages atwww.etiger.com/eu/supportES-RC1-UM-ENFR20140725-2.1-W
FCC Information and Copyright This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu