Essential B1 360 Camera User Manual

Essential Products Inc. 360 Camera

User Manual

Model : B1 Essential CM-1 360 Camera User Manual and Safety Guidelines Product Terms of Use For product terms of use, please go to https://www.essential.com/legal/product-terms. Basic safety Please follow these suggestions and safeguards to decrease the chances of damage to your product, and to lessen the risk of harm or injury, such as from fire, burns, or electric shock: ! Use the product for its intended purposes only. ! Do not open or take apart your product. ! Do not crush, perforate, drop, throw, or try to deform your product. ! Do not short external contacts or circuits, expose your product to open flames or lit substances, or dispose of them in fire, solvents, or water. ! Do not use the product if they aren't working properly or have been damaged, cracked, or dropped. ! Do not expose the product to water or other liquids. ! If the product gets wet, do not try to dry it using any household device such as an oven, microwave, or hair dryer. ! The product generate heat during normal operation. Avoid prolonged, direct, or indirect skin contact, since this may result in discomfort or burns. ! Some applications or prolonged usage may increase product temperature. ! If the product feels hot, discontinue use and close all applications or turn off the product until it cools. ! Ensure that the area around the product is adequately ventilated. Covering the product affects air flow, which can trap heat and redirect it back to the product. This may affect product performance, and poses a possible risk of fire or explosion, which could lead to serious bodily injuries or property damage. Basic usage When using, storing, or cleaning your product: Do not use or store the product or adapter in very cold or hot environments. Do not place the product near credit cards or key cards with a magnetic stripe. Unplug the product before cleaning, during electrical storms, or when unused for extended periods of time. Use a clean, soft, dry cloth to clean the product. Do not use any cleaning products to clean the product.
Radio Frequency and RF Max Power: Radio Equipment Compliance: Hereby, Essential Products, Inc. declares that the radio equipment type 360 Camera is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.essential.com/legal/product-terms. Environment Compliance Waste Electrical and Electronic Equipment (WEEE) This symbol means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Proper recycling of your product will protect human health and the environment. FC/IC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement." CAN ICES-3(B)/NMB-3(B)

Navigation menu