EnGenius Technologies EAP1250 AC1300 Ceiling Mount Access Point User Manual

EnGenius Technologies AC1300 Ceiling Mount Access Point Users Manual

Users Manual

User ManualBusiness SolutionsDual Band Indoor Ceiing Mount Access PointEAP 11AC Seriesversion 1.3
2IMPORTANTTo install this Access Point please refer to the Quick Installation Guide included in the product packaging.
3Chapter 1 Product Overview................................................... 4 Key Features/Introduction........................................................... 5 System Requirements / Package Contents .............................. 6 TechnicalSpecications...............................................................9 Physical Interface........................................................................... 12Chapter 2 Before You Begin .................................................. 14 Computer Settings....................................................................... 15 Mounting the Access Point........................................................... 20Chapter 3 Conguring Your Access Point.......................... 23 Default Settings............................................................................ 24Chapter 4 Building a Wireless Network............................. 25 Access Point Mode....................................................................... 26 WDS AP Mode............................................................................... 27 WDS Bridge Mode........................................................................ 28Chapter 5 Overview............................................................... 29 Overview........................................................................................... 30 Connections.................................................................................... 31Chapter 6 Network ................................................................. 32 Operation Mode/Basic................................................................. 33 IP Settings/SpanningTree Settings..................................... 34Chapter 7 2.4 GHz & 5 GHz Wireless................................... 36 Wireless Settings........................................................................ 39 2.4 GHz/5 GHz Wireless Network........................................... 40 2.4GHz/5GHzSSIDProle......................................................42 Wireless Security.......................................................................... 43 Wireless MAC Filtering............................................................... 46 Wireless Advanced..................................................................... 47 WDSLinkSettings....................................................................... 49 Guest Network Settings............................................................ 50Chapter 8 Management........................................................ 49 Management VLAN Settings.................................................. 51 Advanced Settings....................................................................... 54 Time Zone........................................................................................ 55 Auto Reboot Settings................................................................ 58 Wi-FiScheduler...............................................................................59 Tools.................................................................................................. 60 Account/Firmware........................................................................ 61 Backup/Restore ............................................................................. 64 Log.................................................................................................... 65 Logout/Reset................................................................................. 67Appendix ................................................................................. 68 FCC Interference Statement.................................................. 69 IC Interference Statement.................................................... 70 CE Interference Statement..................................................... 72 Detachable Antenna Usage.................................................... 73Table of Contents
4Chapter 1 Product Overview
5Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright © 2017 EnGenius Technologies, Inc. All rights reserved.Key Features• Hightransmitpower,enablinglongrangeconnectivity• SupportsIEEE802.11ac/b/g/nwirelessstandardswithupto450 Mbps data rate on 2.4GHz and 1300Mbps data rate on 5GHz• Threeinternal5dBi(2.4GHz)andthree5dBi(5GHz)omni-directional MIMO antennas• CanbemonitoredafterdeploymentwithEnGeniusEZ   Controller™ software for Windows  (Freeonlinedownload)• CanbeusedwithincludedpoweradapterorviaPoEwithPoE 802.3at - capable Switches or Injectors• DualBand/ThreeStream• AdvancedTrafcshapingcanbeassisteduserstocontrolupload/ download wirelss speed per SSID• BandSteeringshiftsdualbandclientstothe5GHzbandfortorelieve network congestion on the 2.4 GHz band• SecuredGuestNetworkIntroduction The EAP1750H leverages the breakthrough speed and performance 802.11ac for connecting to laptops and other devices that need to wirelessly stream HD video or transfer large les. The EAP1750H is an 802.11ac 3x3 IndoorAccess Point. This high-powered ceiling mount Dual Band Access Point features speeds up to 450 Mbps on 2.4 GHz and up to 1300 Mbps on the 5 GHz band when associated Introduction - EAP1750Hcan be used with802.3atcapable switches or injectorswithACclientdevices.ItcanbeconguredasanAccessPoint,RepeaterandWDS(AP&Bridge)andfeaturesahightransmit RF power of 28 dBm transmit RF power on the 2.4 GHz band and 28 dBm on the 5 GHz band for long range connectivity. The EAP1750H includes a Gigabit Ethernet port for connecting to 802.3at-capable PoE Switches and anenhancedreceivesensitivityMIMO(MultipleIn/Multiple
6Out)integratedsectorized3Dantennaarray.It’sanidealsolution for spacious interior environments such as large homes,smallandmedium-sizedbusinesses,multiple-oorbuildings,hotels,hospitals,andothervenues.System RequirementsThe following are the Minimum System Requirements in ordercongurethedevice: • ComputerwithanEthernetinterfaceorwirelessnetwork  capability • WindowsOS(7,8,10),MacOS,orLinux-basedoperating  systems • Web-BrowsingApplication(i.e.:Edge,InternetExplorer,Firefox,  Chrome,Safari,oranothersimilarbrowserapplication)Package ContentsThe EAP1750H/EAP1300 package contains the following items(allitemsmustbeinpackagetoissuearefund): • OneAccessPoint • 12VPowerAdapter • RJ-45EthernetCable • QuickInstallationGuide • CeilingandWallMountScrewkit • T-RailMountingkit • MountingBracketThe EAP1250 package contains the following items (allitemsmustbeinpackagetoissuearefund): • OneAccessPoint • 12VPowerAdapter • QuickInstallationGuide • WallMountscrewset • T-RailMountingkit(9/16”and15/16”)* The 3-Pack package is provided the optional adapter for purchasing.
7Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright © 2017 EnGenius Technologies, Inc. All rights reserved.Key Features• Hightransmitpower,enablinglongrangeconnectivity• SupportsIEEE802.11acwave2/b/g/nwirelessstandardswithupto400 Mbps data rate on 2.4GHz and 867Mbps data rate on 5GHz• Twointernal4dBi(2.4GHz)andtwo5dBi(5GHz)omni-directional MIMOantennas(EAP1300)• TwoRP-SMA6dBi(2.4GHz)andtwoRP-SMA5dBi(5GHz)omni-  directionalMIMOantennas(EAP1300EXT)• SupportWave2MU-MIMOfunctionon5GHzradio.• SupportTxBeamformingtoenlargethetransmittingdistance.• CanbemonitoredafterdeploymentwithEnGeniusezMasterfrom local side and remote end side easil.• CanbeusedwithincludedpoweradapterorviaPoEwithPoE 802.3af/at - capable Switches or Injectors• AdvancedTrafcshapingcanbeassisteduserstocontrolupload/ download wirelss speed per SSID / per user• BandSteeringshiftsdualbandclientstothe5GHzbandfortorelieve network congestion on the 2.4 GHz band• SecuredGuestNetworkoptionavailableIntroduction The AP is 802.11 ac wave2/a/b/g/n Outdoor Access Point with speeds up to 400 Mbps on 2.4GHz and 867Mbps on 5GHz band. It can be congured as an Access Point,Repeater or WDS (AP, Station & Bridge). The AP is anaffordable solution which is built in high-powered radios Introduction - EAP1300 (EXT)and long-range settings to replace the ordinary Access Points that do not have the range and reach to connect to agrowingnumberofwirelessusers.WithWave2features,the Access Point could reduce the handling period on client devices and network with more client devices at the same time.
8Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright © 2017 EnGenius Technologies, Inc. All rights reserved.Key Features• Hightransmitpower,enablinglongrangeconnectivity• SupportsIEEE802.11acwave2/b/g/nwirelessstandardswithupto400 Mbps data rate on 2.4GHz and 867Mbps data rate on 5GHz• SupportWave2MU-MIMOfunctionon5GHzradio.• SupportTxBeamformingtoenlargethetransmittingdistance.• CanbemonitoredafterdeploymentwithEnGeniusezMasterfrom local side and remote end side easil.• CanbeusedwithincludedpoweradapterorviaPoEwithPoE 802.3af/at - capable Switches or Injectors• AdvancedTrafcshapingcanbeassisteduserstocontrolupload/ download wirelss speed per SSID / per user• BandSteeringshiftsdualbandclientstothe5GHzbandfortorelieve network congestion on the 2.4 GHz band• SecuredGuestNetworkoptionavailableIntroduction The AP is 802.11 ac wave2/a/b/g/n Outdoor Access Point with speeds up to 400 Mbps on 2.4GHz and 867Mbps on 5GHzband.ItcanbeconguredasanAccessPoint,orWDS(AP, Station & Bridge). The AP is an affordable solutionwhich is built in high-powered radios and long-range settings to replace the ordinary Access Points that do not have the range and reach to connect to a growing number ofwirelessusers.WithWave2features,theAccessPointIntroduction - EAP1250could reduce the handling period on client devices and network with more client devices at the same time.
9L2 Isolation802.1XAuthenticator(MD5/TLS/TTLS/PEAP)Guest NetworkQoS (Quality of Service)WMM(WirelessMultimedia)Wireless ManagementWebinterface(HTTP/HTTPS)SNMP v1/v2c/v3 with MIB I/II and private MIBCLI(Telnet/SSH)Firmware UpgradeBackup/Restore SettingsSaveCongurationasDefaultAuto RebootE-mailAlert/SyslogNoticationPhysical SecurityKensington Security SlotPhysical/Environment ConditionsOperating: Temperature:32°Fto104°F(0°Cto40°C) Humidity(Non-condensing):90%orlessStorage: Temperature:-4°Fto140°F(-20°Cto60°C) Humidity(Non-condensing):90%orlessStandard:IEEE802.11b/g/n on 2.4 GHzIEEE 802.11ac/a/n on 5 GHzIEEE802.3atPhysical Interface1x10/100/1000GigabitEthernetPort1xResetButton1xPowerConnectorLED IndicatorPowerWPSWLAN(WirelessConnection)LANPower RequirementsExternalPowerAdapterDCIN,12V/2AActiveEthernet(Power-over-Ethernet)802.3at PoE InputOperation ModesAccess PointWDS APWDS BridgeRepeater (Available in December, 2017)SecurityWEP(64/128bit)WPA/WPA2(TKIP/AES)Hidden SSIDMACaddressltering,upto32eldsperSSIDTechnical Specications - EAP1750H
10MACaddressltering,upto32eldsperSSIDL2 Isolation802.1XAuthenticator(MD5/TLS/TTLS/PEAP)Guest NetworkQoS (Quality of Service)WMM(WirelessMultimedia)Wireless ManagementWebinterface(HTTP/HTTPS)SNMP v1/v2c/v3 with MIB I/II and private MIBCLI(Telnet/SSH)Firmware UpgradeBackup/Restore SettingsSaveCongurationasDefaultAuto RebootE-mailAlert/SyslogNoticationPhysical/Environment ConditionsOperating: Temperature:32°Fto104°F(0°Cto40°C) Humidity(Non-condensing):90%orlessStorage: Temperature:-4°Fto140°F(-20°Cto60°C) Humidity(Non-condensing):90%orlessStandard:IEEE802.11b/g/n on 2.4 GHzIEEE 802.11ac/a/n on 5 GHzIEEE802.3afPhysical Interface1x10/100/1000GigabitEthernetPort1xResetButton1xPowerConnectorLED IndicatorPowerWPSWLAN(WirelessConnection)LANPower RequirementsExternalPowerAdapterDCIN,12V/1AActiveEthernet(Power-over-Ethernet)802.3af/at PoE InputOperation ModesAccess PointWDS APWDS BridgeRepeater (Available in December, 2017)SecurityWEP(64/128bit)WPA/WPA2(TKIP/AES)Hidden SSIDTechnical Specications - EAP1300(EXT)
11Wireless ManagementWebinterface(HTTP/HTTPS)SNMP v1/v2c/v3 with MIB I/II and private MIBCLI(Telnet/SSH)Firmware UpgradeBackup/Restore SettingsSaveCongurationasDefaultAuto RebootE-mailAlert/SyslogNoticationPhysical/Environment ConditionsOperating: Temperature:32°Fto104°F(0°Cto40°C) Humidity(Non-condensing):90%orlessStorage: Temperature:-4°Fto140°F(-20°Cto60°C) Humidity(Non-condensing):90%orlessStandard:IEEE802.11b/g/n on 2.4 GHzIEEE 802.11ac/a/n on 5 GHzIEEE802.3afPhysical Interface1x10/100/1000GigabitEthernetPort1xResetButton1xPowerConnectorLED IndicatorPower RequirementsExternalPowerAdapterDCIN,12V/1AActiveEthernet(Power-over-Ethernet)802.3af/at PoE InputOperation ModesAccess PointWDS APWDS BridgeSecurityWEP(64/128bit)WPA/WPA2(TKIP/AES)Hidden SSIDMACaddressltering,upto32eldsperSSIDL2 Isolation802.1XAuthenticator(MD5/TLS/TTLS/PEAP)Guest NetworkQoS (Quality of Service)WMM(WirelessMultimedia)Technical Specications - EAP1250
12Physical Interface (EAP1750H/EAP1300(EXT))Dimensions and WeightsDiameter:6.36”Height:1.64”Weight:0.65lbs. 1 Reset Button: Press and hold for over 10 seconds to reset to factory default settings. 2 LED Indicators: LEDlightsforWPS,WLAN5GHz,WLAN2.4GHz,Ethernetport,andPower 3 LAN Port (PoE): EthernetportforRJ-45cable. 4 Power Connector: 12V DC IN for Power. 5 Ceiling (Wall) Mount Hole: Using the provided hardware, theEAP AP can be attached to a ceiling or wall. 6 Kensington Security Slot: ToprotectyourEAP1750H,usetheKensington Security Slot to attach a cable lock*.(EAP1750HOnly) *cable lock not included3 41 256
13Physical Interface (EAP1250)Dimensions and WeightsDiameter:132.4mm(5.22”)Height:37.4mm(1.47”)Weight:220g(0.49lbs.) 1 Reset Button: Press and hold for over 10 seconds to reset to factory default settings. 2 LAN Port (PoE): EthernetportforRJ-45cable. 3 Power Connector: 12V DC IN for Power. 4 Ceiling (Wall) Mount Hole: Using the provided hardware, theEAP AP can be attached to a ceiling or wall.341 2
14Chapter 2 Before You Begin
15Windows XP/Windows 7/Windows 8/Windows 10InordertousetheAccessPoint,youmustrstconguretheTCP/IPv4 connection of your Windows OS computer system. 1a. Click the Start button and open the Control Panel1b. Move your mouse to the lower right hot corner to display the Charms Bar and select the Control Panel in Windows 8 OS.1c. In Windows 10, click Start to select All APPs to enter the folder of Windows system for selecting Control Panel. Computer SettingsWindows XP Windows 7Windows 8Windows 10
162a. In Windows XP, click Network Connections. 2b. In Windows 7/Windows 8/Windows 10, click View Network Status and Tasks in the Network and Internetsection,thenselect Change adapter settings.3. Right click on Local Area Connection and select Properties.4. Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties.5. Select Use the following IP address and enter an IP address that is different from the Access Point and Subnet mask,thenclickOK.
17Note: Ensure that the IP address and Subnet mask are on the same subnet as the device.Forexample:APIPaddress:192.168.1.1 PCIPaddress:192.168.1.2–192.168.1.255 PCSubnetmask:255.255.255.0
18Apple Mac OS X1. Go to System Preferences(WhichcanbeopenedintheApplicationsfolderorselectingitintheAppleMenu).2. Select Network in the Internet & Network section.3. Highlight Ethernet.4. In Congure IPv4,selectManually.5. Enter an IP address that is different from the Access Point and Subnet mask then press OK.Note: Ensure that the IP address and Subnet mask are on the same subnet as the device.Forexample:AdeviceIPaddress:192.168.1.1 PCIPaddress:192.168.1.2–192.168.1.255 PCSubnetmask:255.255.255.06. Click Apply when done.
191. Ensure that the computer in use has an Ethernet Controller port (RJ-45 Ethernet Port). For moreinformation,verifywithyourcomputer’susermanual.2. Connect one end of the Category 5e Ethernet cable into theRJ-45portoftheEAP1750HandtheotherendtotheRJ-45portofthecomputer.Ensurethatthecableis securely connected to both the EAP1750H and the computer.3. Connect the Power Adapter DC connector to the DC-IN port of the EAP1750H and the Power Adapter to an available electrical outlet. Once both connections are secure,verifythefollowing:  a)EnsurethatthePOWERlightison(itwillbeorange).  b)Ensurethatthe2.4GHz/5GHzWLANlightison(itwill be bluefor2.4G,andgreenfor5G).  c) EnsuregthatgthehLANg(ComputergEAP1750HgConnection)  lightison(itwillbeblue).  d)Once all three lights are on, proceed to set up the Access Point using the computer.Thisdiagramdepictsthehardwareconguration.Hardware InstallationEthernetPCPowerOutletAC/DC Cable
20Using the provided hardware, the EAP1750H/EAP1300can be attached to a ceiling or wall.To attach the EAP AP to a ceiling or wall using the mounting bracket:1. Attach the mounting bracket to the wall or ceiling using the provided wall/ceiling mounting hardware kit.2. Insert the provided short screws into the bottom cover of the EAP. Leaveenoughofthescrewsexposedtoensurethattheunit can be attached to the mounting bracket.Ifextraspaceisrequired,usetheprovidedspacersandlongscrews from the T-Rail mounting hardware kit to increase the space between the unit and the mounting bracket.3. Mount the EAP on the mounting bracket by rotating the unitclockwiseabout90degreestosecureitinplace.Mounting the EAP1750H / EAP1300(EXT)WallMounting ScrewLock the EAP1750H by revolvingMounting BracketP2.6*12 ScrewP3.5*32 Screw
21Attaching the EAP1750H/EAP1300 to a ceiling using the provided T-Rail connectors:1. Attach the T-Rail connectors to the bottom cover of the EAP using the provided short screws.Note: Two sizes of T-Rail connectors are included in the mounting hardware kit: 15/16in (2.38cm) and 9/16in(1.43cm).Ifextraspaceisrequiredtoaccommodatedropceilingtiles,usetheprovidedspacersandlongscrews. 2. Line up the connected T-Rail connectors with an appropriately sized rail and press the unit onto the rail until it snaps into place.Note: ToprotectyourEAP,usetheKensingtonSecuritySlottoattachacablelock(cablelockisnotincluded).P2.6*10 ScrewClipT-RailClip ClipsSpacerP2.6*25 Screw
22Attaching the EAP1250 to a ceiling :1. Slide the ceiling mount base into the slot of this Access Point.2. Hold the Access Point with one hand to reach the other hand over the T-rail side of the bracket. Then hook the stationary end of the ceiling mount bracket on to the T-rail.Attaching the EAP1250 to a wall :3. ContinuefromA,determinethewheretheAccessPointto be placed and mark location on the surface for the two mounting holes. Use the appropriate drill bit to drill two 8.1mm diagram and 26mm depth holes in the markings and hammer the bolts into the openings.4.Screwtheanchorsuntotheholesuntiltheyareushwith the wall; screw the included screw into the achors.5. Place the Access point against the wall with the mounting screw headsNote: Mounting hardware kit are included 15/16in (2.38cm)and9/16in(1.43cm).Ifextraspaceisrequiredto accommodate drop ceiling tiles, use the providedspacers and long screws.12345
23Chapter 3 Conguring Your Access Point
24This section will show you how to congure the deviceusingtheweb-basedcongurationinterface.Default SettingsPlease use your Ethernet port or wireless network adapter to connect the Access Point.IP Address 192.168.1.1Username/Password admin/admin Web Conguration1. Openawebbrowser(InternetExplorer/Firefox/Safari)and enter the IP Address http://192.168.1.1.Note: If you have changed the default LAN IP Address of theAccessPoint,ensureyouenterthecorrectIPAddress.2. Thedefaultusernameandpasswordare:admin. Once youhaveenteredthecorrectusernameandpassword,click the Login button to open the web-based congurationpage.* The model name will be varied in the web browser.3. If successful, you will be logged in and see the EAPUser Menu.Conguring Your Access Point
25Chapter 4 Building a Wireless Network
26 The EAP1750H has the ability to operate in various modes. This chapter describes the operating modes of the EAP1750H.Access Point ModeInAccessPointMode,theEAP1750HbehaveslikeacentralconnectionforstationsorclientsthatsupportIEEE802.11a/b/g/nnetworks.ThestationsandclientsmustbeconguredtousethesameSSID(ServiceSetIdentier)andsecuritypasswordtoassociatewiththeEAP1750H.TheEAP1750Hsupportsuptoeight(8)SSIDsperband(16total)atthesametimeforsecureaccess. EAP 1750HAP/APClientClientClient ClientClientClient2.4 GHz 5 GHz
27WDS AP ModeThe EAP1750H also supports WDS AP mode. This operating mode allows wireless connections to the EAP1750H using WDStechnology.Inthismode,conguretheMACaddressesinbothAccessPointstoenlargethewirelessareabyenablingWDSLinksettings.WDSsupportsuptofour(4)APMACaddresses.EAP1750HWDS APEAP1750HWDS AP2.4 GHz 2.4 GHz5 GHz 5 GHzClientClient ClientClientClientComputerClientComputer
28WDS Bridge ModeInWDSBridgeMode,theEAP1750HcanwirelesslyconnectdifferentLANsbyconguringtheMACaddressandsecuritysettings of each EAP1750H device. Use this mode when two wired LANs located a small distance apart want to communicate witheachother.ThebestsolutionistousetheEAP1750HtowirelesslyconnecttwowiredLANs,asshowninthefollowinggure.WDSBridgeModecanestablishuptofour(4)WDSlinks,creatingastar-likenetwork.Note: WDS Bridge Mode does not act as an Access Point because Access Points linked by WDS use the same frequency channel.MoreAccessPointsconnectedtogethermaylowerthroughput.Thiscongurationcanalsobesusceptibletogenerateendlessnetworkloopsinyournetwork,soitisrecommendedtoenabletheSpanningTreefeaturetopreventthisfromhappening.YoucanndinformationabouttheSpanningTreeFunctiononpage29.EAP1750HWDS BridgeEAP1750HWDS BridgeEAP1750HWDS BridgeClientComputerClientComputerClientComputer
29Chapter 5 Overview
30Save ChangesThis page lets you save and apply the settings shown under Unsaved changes list,orReverttheunsavedchangesandrevert to the previous settings that were in effect. Device StatusClicking the Device Status link under the Overview menu shows the status information about the current operating mode. • The Device Information section shows general system informationsuchasDeviceName,MACAddress,CurrentTime,FirmwareVersion,andManagementVLANIDNote: VLANIDisonlyapplicableinAccessPoint,WDSAP or WDS BR mode. • The Memory Information section shows usage of memorysuchasTotalAvailable,Free,Cached,BufferedOverview
31•  The LAN Information section shows the Local Area NetworksettingssuchastheLANIPAddress,Subnetmask, Primary DNS Address, Secondary DNS Address,status of DHCP client, and status of Spanning Treeprotocol(STP). The Wireless LAN Information 2.4 GHz/5 GHz section shows wireless information such as Operation Mode,Frequency,andChannel.SincethisAccessPointsupportsmultiple-SSIDs,informationabouteachSSID,theESSID,andsecuritysettings,aredisplayedNote: ProleSettingsareonlyapplicableinAccessPointand WDS AP modes.•  TheStatistics section shows Mac information such as SSID,MACaddress,RXandTX.
322.4 GHz/5 GHz Connection ListClick the connection link under the Overview menu displays the connection list of clients associated to the AP’s 2.4GHz/5 GHz, along with the MAC addresses and signalstrength for each client. Clicking Refresh updates the client list.Note: Only applicable in Access Point and WDS AP modes.2.4 GHz/5 GHz WDS Link ListClick the connection link under the Overview menu. This pagedisplaysthecurrentstatusoftheWDSlink,includingWDSLinkID,MACAddress,LinkStatusandRSSI.Note: Only applicable in WDS AP and WDS Bridge modes.RealtimeTheRealtimesectioncontainsthefollowingoptions: CPU Loading: 3 minutes CPU loading percentage information,itdisplayscurrentloading,averageloadingand peak loading status. Left bar is loading percentage; button is time tracing. Interval is every 3 secondsConnections Realtime
33 Trafc Loading: 2.4GHz and 5GHz and Ethernet port inboundandoutboundtrafcbycurrent,averageandpeak time. Realtime Connection (Pkts): Overview on current active network connections. It displays UDP and TCP packets information and other connection status. UDP connections curve is in blue; TCP connection curve is in green; others curve is in red. Below of chart shows connections source and destination.
34Chapter 6 Network
35IPv4/IPv6 SettingsThispageallowsyoutomodifythedevice’sIPsettings.IP Network Settings: Select whether the device IP address willuseastaticIPaddressspeciedintheIPaddresseldor be obtained automatically when the device connects to a DHCP server.IP Address: The IP address of this device.Subnet Mask: The IP Subnet mask of this device.Gateway: The Default Gateway of this device. Leave it blank if you are unsure of this setting.Primary/Secondary DNS: The primary/secondary DNS address for this device.Save: Click Savetoconrmthechanges.Spanning Tree Protocol (STP) SettingsThis page allows you to modify the Spanning Tree settings. Enabling the Spanning Tree protocol will prevent network loops in your LAN network.Spanning Tree Status:EnablesorDisablestheSpanningTree function. Default is Disable.Hello Time: Species Bridge Hello Time in seconds. Thisvalue determines how often the device sends handshake packets to communicate information about the topology throughout the entire Bridged Local Area Network.Max Age: SpeciesBridgeMaxAgeinseconds.IfanotherBasic
36bridge in the spanning tree does not send a hello packet for alongperiodoftime,itisassumedtobeinactive.Forward Delay:SpeciesBridgeForwardDelayinseconds.Forwarding delay time is the time spent in each of the Listening and Learning states before the Forwarding state is entered. This delay is provided so that when a new bridge comesontoabusynetwork,itanalyzesdatatrafcbeforeparticipating in the network.Priority: SpeciesthePriorityNumber.Asmallernumberhas a greater priority than a larger number.Save: Click Savetoconrmthechanges.
37Chapter 7 2.4 GHz & 5 GHz Wireless
38Wireless SettingsDevice Name: Enter a name for the device. The name you type appears in SNMP management. This name is not the SSID and is not broadcast to other devices.Band Steering (Available on ENS620EXT): Enable Band Steering to send 802.11n clients to the 5 GHz band,where802.11b/gclientscannotgo,andleave802.11b/gclients in 2.4GHz to operate at their slower rates. Before implementingthisfeature,wesuggestyoutoassuretheboth2.4GHzand5GHzSSID,aswelllassecuritysettingsmust be the same. EnGenius Band Steering supports followingadvancedsettings, *Force 5GHz:WhenbandsteeringisconguredtoForce5GHz mode, the AP will not dual band capable clientdevices to network to the 2.4GHz band only if the client devices are not currently associated on 2.4GHz radio in this AP. *Prefer 5GHz:WhenbandsteeringisconguredtoPrefer5GHz  mode, the AP will steer dual band capable clientdevices to 5GHz radio when the RSSI value of these client devices on 5GHz radio is more than set one. The allowed RSSI value for default setting is -75dBm. *Band Balance: When band steering is congured toBandBalancemode,theAPwillsteerdualbandcapableclient devices to 5GHz when the RSSI value of these client devices on 5GHz radio is more than set one. To evenly allocateRFresourceontheboth2.4GHzand5GHzradios,users also can set the portion of client devices on 5GHz radio to assure smoothly connection. The default value of the5GHzradiois75%.Save: Click Savetoconrmthechanges.Wireless
39This page displays the current status of the Wireless settings of this AP.2.4 GHz/5 GHz Wireless NetworkOperation Mode: Scrow down this list to select operation modes for implementing on this radio. The default operation mode is Access Point on base stations and Access Points and is Client BridgeonClientPremiseEquipements(CPE).Meanwhile, EnGenius outdoor devices also support WDSmodes for peer to peer or peer to multi-peer connections. Wireless Mode: Scrow down this list to select wireless broadcasting standard on 2.4GHz and 5GHz frequency bands. Channel HT Mode: Scrow down this list to select bandwidth for operating under a frequency band. The default channel bandwidth is 20 MHz on 2.4GHz frequency radio and 40 MHz on 5GHz frequency radio. Considering the different applications, users can decide to implement a channelbandwidthtofulllrealapplications.Thelargerthechannel,the greater the transmission quality and speed.Transmit Power (Tx Power):DefaultTxpowerisAutoto obey regulartory power of each country.Channel: Click Configuration button to open a new windows to configure channels for performing wireless service.
40Wireless SecurityTheWirelessSecuritysectionletsyouconguretheAP’ssecurity modesSecuirty Mode: Including WEP, WPA-PSK, WPA2-PSK,WPA-PSKMixed,WPA,WPA2,andWPAMixed.Westronglyrecommend you to use WPA2-PSK mode.* Setting of WEP mode:Auth Type: Select Open System or Shared Key.Input Type:  ASCII:RegularText(recommended)  HexadecimalNumbers(Foradvancedusers)Key Length: Select the desired option and ensure thatwirelessclientsusethesamesetting.Yourchoicesare64,128,and152-bitpasswordlengths.Default Key: Select the Key you wish to be the default. Transmitted data is ALWAYS encrypted using the Default Key; the other Keys are for decryption only. You must enter a Key Value for the Default Key.Encryption Key Number: Enter the Key Value or values you wish to use. Only the Key selected as Default is required. The others are optional.
41* Setting of WPA-PSK, WPA2-PSK and WPA-PSK Mixed (Pre-Shared Key):Encryption:YoumayselectAES,TKIPorBoth(TKIP+AES)to be the encryption type you would like. Please ensure that your wireless clients use the same settings.Passphrase: Wireless clients must use the same Key to associatethedevice.IfusingASCIIformat,theKeymustbefrom8to63charactersinlength.IfusingHEXformat,theKeymustbe64HEXcharactersinlength.Group Key Update Interval: Species how often, inseconds,theGroupKeychanges.Thedefaultvalueis3600.** Setting of WPA-Enterprise & WPA2-Enterprise (Pre-Shared Key):Encryption: Select the WPA encryption type you would like. Please ensure that your wireless clients use the same settings.Radius Server: Enter the IP address of the Radius server.Radius Port: Enter the port number used for connections to the Radius server.
42Radius Secret: Enter the secret required to connect to the Radius server.Radius Accounting: Enable or disable accounting feature.Radius Accounting Server: Enter the IP address of the Radius accounting server.Radius Accounting Port Enter the port number used for connections to the Radius accounting server.Radius Accounting Secret: Enter the secret required toconnect to the Radius accounting server.Interim Accounting Interval: Species how often, inseconds,theaccountingdatasends.Note: 802.11n does not allow WEP/WPA-PSK TKIP/WPA2-PSK TKIP security mode. The connection mode will automatically change from 802.11n to 802.11g.
43Wireless AdvancedWireless Trafc ShapingTrafc shaping regulates the ow of packets leaving aninterfacetodeliverimprovedQualityofService.Enable Trafc Shaping:Defaultisdisable.YoumaycheckthisoptiontoenableWirelessTrafcShapingperSSID.Download Limit: Speciesthewirelesstransmissionspeedused for downloading. Upload Limit: Species the wireless transmission speedused for uploading.Per User: Check this option to enable wireless trafcshaping per user function. This function allow users to limit themaximumdownload/uploadbandwidthforeachclientdevices on this SSID.Save: Click Savetoconrmthechanges.
44Fast RoamingEnable the function to serve mobile client devices that roam from Access Point to Access Point. Some applications running on Client devices require fast re-association when they roam to a different Access PointPlease enter the settings of the SSID and initialize the Security modetoWPAenterprise,aswellastosettheRadiusServerrstly.UserscanenabletheFastRoamingandimplementtheadvanced search.Please also set the same enterprise Encryption under the same SSID on other Access Points and enable the Fast Roaming. When the conguration is realized ondifferent Access Point, the mobile client devices can runthe voice service and require seamless roaming to prevent delay in conversation from Access Point to Access Point. Enable Fast Roaming: Enable or disable fast roaming feature.Enable Advanced Search: Enable or disable advanced search feature.
45WDS Link SettingsUsingtheWDS(WirelessDistributionSystem)featurewillallow a network administrator or installer to connect to Access Points wirelessly. Doing so will extend the wiredinfrastructure to locations where cabling is not possible or inefcienttoimplement.Note: Compatibility between different brands and models of Access Points is not guaranteed. It is recommended that the WDS network be created using thesamemodelsformaximumcompatibility.Also note: All Access Points in the WDS network need to use the same Channel and Security settings.TocreateaWDSnetwork,pleaseentertheMACaddressesof the Access Points that you want included in the WDS. TherecanbeamaximumoffourAccessPoints.Note: Only applicable in WDS AP and WDS Bridge modes.2.4 GHz/5 GHz WDS Link SettingsSecurity: Select None or AES from the drop-down list.AES Passphrase: Enter the Key Values you wish to use. Other Access Points must use the same Key to establish a WDS link.MAC Address: Enter the Access Point’s MAC address towhereyouwanttoextendthewirelessarea.Mode:Selecttodisableorenablefromthedrop-downlist.Save: Click Save toconrmthechanges.
46Adding a guest network to allow visitors to use the internet withoutgivingoutyourofceorcompanywirelesssecurity.You can add a guest network to each wireless network in the 2.4GHz frequencies and 5GHz frequencies.SSID: Specied the SSID for the current prole.. Choicesgivenare:Disabled,DenyMACinthelist,orAllowMACinthe list.Hidden SSID: CheckthisoptiontohideSSIDfromclients,Ifchecked,thisSSIDwillnotappearintheAPdetect.Client Isolation: Click the appropriate radio button to allow or prevent communication between client devices.IP address: The IP Address of this device.Subnet Mask: The IP Subnet mask of this device.Starting IP Address: TherstIPAddressintherangeofthe addresses by the DHCP server.Ending IP Address: The last IP Address in the range of addresses assigned by the DHCP server.Guest Network Settings
47Enable : Enable the Fast Handover feature by ensuring that each client is served by at least one Access Point at any time. Access Points continuously monitor the connectivity quality of any client in their range and efciently sharethis information with other Access Points in the vincinity of that client to coordinate which of them should serve the client best.RSSI: Enter the RSSI (Received Signal Strength Index) inorder to determine the handover procedure which the current wireless link will terminate. RSSI is an indication of thepowerlevelbeingreceivedbytheantenna.Therefore,thehighertheRSSInumber,thestrongerthesignal.RSSI Threshold
48Wireless MAC Filtering is used to allow or deny network access to wireless clients (computers, tablet PCs, NAS,smartphones,etc.)accordingtotheirMACaddresses.Youcan manually add a MAC address to restrict permission to accessEAP1750H.Thedefaultsettingis:Disable Wireless MAC Filter.Note: Only applicable in Access Point and WDS AP mode.ACL (Access Control List) Mode: Determines whether network access is granted or denied to clients whose MAC addresses appear in the MAC address table on this page. Choicesgivenare:Disabled,DenyMACinthelist,orAllowMAC in the list.MAC Address: Enter the MAC address of the wireless client youwishtocongurefor.Add: Click Add to add the MAC address to the MAC Address table.Delete: Deletes the selected entries.Save: Click Save to apply the changes.Wireless MAC Filtering
49This page allows you to congure advanced wirelesssettings for the EAP1750H. It is recommended that the defaultsettingsareusedunlesstheuserhasexperiencewith more advanced networking features. 2.4 GHz/5 GHz Wireless AdvancedData Rate: Select a data rate from the drop-down list. The data rate affects throughput of data in the EAP1750H. Thelowerthedatarate,thelowerthethroughput,thoughtransmission distance will be lowered as well. Transmit Power: Sets the power output of the wireless signal.RTS/CTS Threshold:Speciesthethresholdpackagesizefor RTC/CTS. A smaller number causes RTS/CTS packets to be sent more often and in turn consumes more bandwidth.Distance: Species the distance between Access Pointsand clients. Longer distances may drop high-speed connections.Aggregation: Merges data packets into one packet. This optionreducesthenumberofpackets,butincreasespacketsizes.Save: Click Savetoconrmthechanges.Wireless Advanced
50TheWi-FiProtectedSetup(WPS)featurecomplieswiththeWi-Fi Alliance WPS standard and makes it easier to quickly addclientdevicestoanestablished,security-enabledWi-Finetwork. WPSreducestheuserstepsrequiredtocongureanetworkand supports two methods that are familiar to most consumerstocongureanetworkandenablesecurity.Note: Only applicable in Access Point and WDS AP mode.WPS (Wi-Fi Protected Setup)WPS: Select to enable or disable the WPS feature.WPS Current Status: Shows whether the WPS feature is Congured or Uncongured. When it is congured, theWPS has been used to authorize a connection between the device and wireless clients.Self Pin Code: The PIN code for this device.SSID: The SSID (wireless network name) used whenconnecting using WPS.Authentication Mode: Displays the encryption method used by the WPS process.Passphrase Key: This is the passphrase key that is randomly generated during the WPS process. It is required if wireless clients that do not support WPS attempt to connect to the wireless network.WPS via Push Button: Click the Start button to initialize the WPS feature using the Push Button method.WPS via PIN: Enter the PIN code for the wireless device and click this button to initialize WPS feature using the PIN method.Save:ClickSavetoconrmthechanges.WPS (Wi-Fi Protected Setup)
51Using WDS (Wireless Distribution System) will allowa network administrator or installer to connect to Access Points wirelessly. Doing so will extend the wiredinfrastructure to locations where cabling is not possible or inefcienttoimplement.Note: Compatibility between different brands and models of Access Points is not guaranteed. It is recommended that the WDS network be created using thesamemodelsformaximumcompatibility.Also Note: All Access Points in the WDS network must use the same Channel and Security settings.TocreateaWDSnetwork,pleaseentertheMACaddressesof the Access Points that you want included in the WDS network.Therecanbeamaximumoffour(4)AccessPoints.Note: Only applicable in WDS AP and WDS Bridge modes.2.4 GHz/5 GHz WDS Link SettingsSecurity: Select None or AES from the drop-down list.AES Passphrase: Enter the Key Values you wish to use. Other Access Points must use the same Key to establish a WDS link.MAC Address: Enter the Access Point’s MAC address towhichyouwanttoextendthewirelessarea.Mode:SelectDisable or Enable from the drop-down list.Save: Click Savetoconrmthechanges.WDS Link Settings
52Chapter 8 Management
53Management VLAN SettingsThis page allows you to assign a VLAN tag to packets sent over the network. A VLAN is a group of computers on a networkwhosesoftwarehasbeenconguredsothattheybehave as if they were on a separate Local Area Network (LAN). Computers on VLAN do not have to be physicallylocatednexttooneanotherontheLAN.Note: Only applicable in Access Point and WDS AP modes.Management VLAN:IfyournetworkincludesVLANs,youcan enable Management VLAN ID for packets passing through the Access Point with a tag. Save: Click SavetoconrmthechangesorCancel to cancel and return to previous settings.Note: IfyoureconguretheManagementVLANID,youmay lose your connection to this AP. Verify that the DHCP server supports the recongured VLAN ID andthen reconnect to this AP using the new IP address. MGMT VLAN Settings
54SNMP SettingsThispageallowsyoutoassigntheContactDetails,Location,CommunityName, and Trap Settings for a Simple NetworkManagement Protocol (SNMP). SNMP is a networkingmanagement protocol used to monitor network attached devices.SNMPallowsmessages(calledprotocoldataunits)to be sent to various parts of the network. Upon receiving these messages, SNMP compatible devices (called agents)returns the data stored in their Management Information Bases.SNMP Enable/Disable:EnablesordisablestheSNMPfeature.Contact: Speciesthecontactdetailsofthedevice.Location: Speciesthelocationofthedevice.Community Name (Read Only): Speciesthepasswordfor the SNMP community for read only access.Community Name (Read/Write):Speciesthepasswordfor the SNMP community with read/write access.Trap Destination Address:SpeciestheIPaddressofthecomputer that will receive the SNMP traps.Trap Destination Community Name: Speciesthepassword for the SNMP trap community.SNMPv3: Enables or disables the SNMPv3 feature.User Name:SpeciestheusernameforSNMPv3.Auth Protocol:Selectstheauthenticationprotocoltype:MDS or SHA.Auth Key: Speciestheauthenticationkey.Priv Protocol:Selectstheprivacyprotocoltype:DES.Priv Key: Speciestheprivacykeyforprivacy.Advanced Settings
55Engine ID: SpeciestheengineIDforSNMPv3.Apply Save: Click Apply Save to apply the changes.CLI SettingsCLI:TheCommandLineInterface(CLI)allowsyoutotypecommands instead of choosing them from a menu or selecting an icon.SSH:EnableSecureShell(SSH)tomakesecure,encryptedconnections in the network. Secure Shell is a network protocolthatallowsdatatobeexchangedusingasecurechannel between two network devices.HTTPS: Enable HTTPS to transfer and display web content securely.TheHypertextTransferProtocoloverSSL(SecureSocketLayer)isaTCP/IPprotocolusedbywebserverstotransfer and display web content securely. Email AlertYou can use the Email Alert feature to send messages to the congured email address when particular systemevents occur. Note:DoNOT use your personal email address as it can unnecessarilyexposeyourpersonalemaillogincredentials.Use a separate email account made for this feature insteadStatus: Enable this function for further settings.From: Enter the email address to show the sender of the email.To: Enter the address to receive email alerts.Subject: Enterthetexttoappearintheemailsubjectline.
56Username: Enter the username for the email account that will be used to send emails.Password: Enter the password for the email account that will be used to send emails.SMTP Server: Enter the IP address or hostname of the outgoing SMTP server.Port: Enter the SMTP port number to use for outbound emails.
57Time SettingThis page allows you to set the internal clock of the AP. Manually Set Date and Time: Manually specify the date and time.Synchorize with PC:ClickthisbuttontosynchorizeDate and time of this AP with the PC.Automatically Get Date and Time: Select Automatically Get Date and Time and check whether you wish to enter the IP address of an NTP server or use the default NTP server to have the internal clock set automatically.Time Zone: Choose a time zone to implement the service for this AP.Enable Daylight Saving:Checkwhetherdaylightsavings applies to your area.Start:Selecttheday,month,andtimewhendaylightsavings time starts.Enable Daylight Saving:Selecttheday,month,andtimewhen daylight savings times ends.Time Zone
58Auto Reboot Settings You can specify how often you wish to reboot the AP.Auto Reboot Setting: Enables or disables the AutoReboot function.Timer:Selectthedayandenterthetimeyouwouldliketo reboot automatically.Save:ClickSave to apply the changes.
59Wi-Fi SchedulerThe Wi-Fi Scheduler can be created for use in enforcing rules. For example, if you wish to restrict web access toMon-Fri from 3pm to 8pm, you could create a scheduleselectingMon,Tue,Wed,ThuandFriwhileenteringaStarttime of 3pm and End Time of 8pm to limit access to these times.Status: Enables or disables the Wi-Fi scheduler function.Wireless Radio: Select 2.4 GHz or 5 GHz from the drop- down list for the preferred band type.SSID Selection: Select a SSID from the drop-down list.Schedule Templates: Select a schedule template from the drop-down list.Day(s): Placeacheckmarkintheboxesforthedesireddaysor select the All Week radio button to select all seven days of the week.Duration:TheStartTimeisenteredintwoelds.Therstboxisforhoursandthesecondboxisforminutes.TheEndTime is entered in the same format as the Start time.
60Ping Test Parameters This page allows you to analyze the connection quality of the AP and trace the routing table to a target in the network.Target IP: Enter the IP address you would like to search.Ping Packet Size: Enter the packet size of each ping.Number of Pings: Enter the number of times you wish to ping. Start Ping: Click Start Ping to begin pinging the target device(viaIP).Traceroute Target: Enter the IP address or domain name you wish to trace.Start Traceroute: Click Start Traceroute to begin the trace route operation.Tools
61Speed Test Parameters / LED Control This page allows you to implement speed test to realize the throughput of a target DUT.Target IP / Domain Name: Enter an IP address or domain name you wish to impelement a speed test for realizing the variance on wireless speed.Time Period: Enter the time in seconds that you would like the test to implement for and in how many intervals. IPv4/IPv6 Port: This Access Points uses IPv4 5001 andIPv6 5002 port for the speed test.Start:Clickstarttoimplementspeedtest.LED ControlControlLEDon/offforPower,LANinterface,or2.4GHz/5GHz WLAN interface.Power: Enables or disables the Power LED indicator.LAN: Enables or disables the LAN LED indicator.WLAN-2.4 GHz: Enables or disables the WLAN-2.4 GHz LED indicator.WLAN-5 GHz: Enables or disables the WLAN-5 GHz LED indicator.
62Device Discovery This page allows you to discover devices from network forOperationMode,IPAddress,SystemMACAddressandFirmware version.
63This page allows you to change the AP username and password. By default, the username is: admin and the passwordis:admin. The password can contain from 0 to 12 alphanumeric characters and is case sensitive.Account SettingsAdministrator Username: Enter a new username forloggingintotheNewNameentrybox.Current Password: Enter the old password for logging in totheOldPasswordentrybox.New Password: Enter the new password for logging in to theNewPasswordentrybox.Verify Password: Re-enter the new password in the ConrmPasswordentryboxforconrmation.Apply: Click Apply to apply the changes.Firmware UpgradeThis page allows you to upgrade the firmware of the AP.To Perform the Firmware Upgrade:1. Click the Choose Filebutton andnavigatethe OSlesystemtothelocationoftheupgradele.2. Selecttheupgradele.ThenameofthelewillappearintheUpgradeFileeld.3. Click the Upload button to commence the rmwareupgrade.Note: The device is unavailable during the Firmware upgrade process and must restart when the upgrade is completed. Any connections to or through the device will be lost.Account Firmware
64Backup/RestoreThis page allows you to save the current device configurations. When you save your configurations,you also can reload the saved configurations into the device through the Restore Saved Settings from a file section.Ifextremeproblemsoccur,orifyouhavesettheAPincorrectly,youcanusetheReset button in the Revert to Factory Default Settings section to restore all the configurations of the AP to the original default settings.Backup Setting: Click Export to save the current configured settings.Restore New Setting: To restore settings that have been previously backed up, click Browse, select thefile,andclickRestore.Restore to Default: Click Reset button to restore the AP to its factory default settings.
65User SettingThe function allows you to backup the current device configurations into the AP as the default value. If extreme problems occur, or if you have set the APincorrectly,youcanpushtheResetbuttontorevertallthe configurations of the AP to the user default.Back Up Setting as Default: Click Backup to backup theusersettingsyouwouldliketothedevice’smemoryfor the default settings.Restore to User Default:ClickRestore to restore user settings to the factory standard settings.Note1:Aftersettingthecurrentsettingsasthedefault,youshouldclicktheRestore to Default on the web interface for reverting the settings into the factory default instead of pushing the reset button.Note2: Please write down your account and password before saving. The user settings will now become thenewdefaultsettingsatthenextsuccessfullogin.
66System LogThe AP automatically logs (records) events of possibleinterest in its internal memory. To view the logged information,clicktheLog link under the System Manager menu. If there is not enough internal memory to log all events, older events are deleted from the log. Whenpowereddownorrebooted,thelogwillbecleared.Status:Enable/Disablethisfunction.Log type: You may choose one of log types to display logs in the following window. The default log types is All. Remote LogThis page allows you to setup the Remote Log functions for this AP.Remote Log:Enable/Disablethisfunction.Log Server IP Address: Enter the IP address of the log server.Apply: Click Apply to apply the changes.Log
67LogoutLogout: Click Logout in Management menu to logout.Pleaseconrmagaintologoutthesystemornot.ResetIn some circumstances, it may be required to force thedevice to reboot. Click on Reset to reboot the AP.Onceyou click reset button,you will seethe options forreboot or restore this AP.Rebootthedevice:Clickittorebootthisdevice.RestoretoFactoryDefault:Clickittoresetthisdevicetofactory default setting. RestoretoUserDefault:Clickittoresetthisdevicetouserdefaultsettings.Forrealizingthesettingmethod,you may refer page 66 and page 67.
68Appendix
69Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorientorrelocatethereceivingantenna. • Increasetheseparationbetweentheequipmentandreceiver. • Connecttheequipmentintoanoutletonacircuitdierentfromthattowhichthereceiverisconnected. • Consultthedealeroranexperiencedradio/TVtechnicianforhelp. FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.IMPORTANT NOTE: Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operation of this device is restricted to indoor use only.Appendix A
70Industry Canada StatementThis device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Ce dispositif est conforme à la norme CNR-247 d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Caution: (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;(ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radarscouldcauseinterferenceand/ordamagetoLE-LANdevices.(iii) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5650-5850 MHz andthattheseradarscouldcauseinterferenceand/ordamagetoLE-LANdevices.Avertissement:(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur an de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;(ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillageet/oudesdommagesauxdispositifsLAN-EL.(iii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5650-5850 MHz et que ces radars pourraient causer du brouillageet/oudesdommagesauxdispositifsLAN-EL.Appendix B - IC Interference Statement
71FOR MOBILE DEVICE USAGE Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.Pour l’utilisation de dispositifs mobiles) Déclaration d’exposition aux radiations:Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps.
72Europe – EU Declaration of ConformityThisdevicecomplieswithDirective2014/53/EUissuedbytheCommissionoftheEuropeanCommunity.- Declaration of ConformityPlease added certication standard in your user manual which depended on the test standards your device performed. or- If the DoC should be a simplied version, please take below as reference –Hereby,EnGeniusNetworksdeclaresthattheEAP1750H/EAP1300/EAP1300EXT/EAP1250areincompliancewithDirective2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address:Importer:EnGeniusNetworksEuropeB.V.Importer Address: ESP 240, 5633 AC Eindhoven, The NetherlandsManufacturer : EnGenius Networks. Inc.Manufacturer Address: No.500, Fusing 3rd Rd., Hwa-Ya Technology Park Kuei-Shan Dist., Taoyuan City, Taiwan (R.O.C.)CEDoCLink:https://www.engeniusnetworks.eu/ens500ext-ac-ens500-ac-enstation5-accedocAppendix C - CE Interference Statement
73Thisradiotransmitter(IC:10103A-EAP1300/Model:EAP1300/EAP1300EXT)hasbeenapprovedbyISEDtooperatewiththeantennatypelistedbelow with maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.Le présent émetteur radio (IC: 10103A-EAP1300 / Model: EAP1300/EAP1300EXT) a été approuvé par ISED pour fonctionner avec les typesd’antenneénumérésci-dessousetayantungainadmissiblemaximal.Lestypesd’antennenoninclusdanscetteliste,etdontlegainestsupérieurau gain maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur. Appendix D - DETACHABLE ANTENNA USAGE

Navigation menu