Elexa Consumer SMMAL-T-1 POWER TILT LCD/PLASMA MOUNT AND AMBIENT LIGHT KITS User Manual SMM AL T USER

Elexa Consumer Products Inc. POWER TILT LCD/PLASMA MOUNT AND AMBIENT LIGHT KITS SMM AL T USER

Users Manual

Usermanual1． Functionalschematicdiagram2.Instructions1)changecolormanually . Pressthebutton“MODEL”toturnon,akindofcolorlight,pressthisbuttonordinaltocontroltheAmbientlightforchangingcolors(changesevencolormost).Pressthebuttoneighthtimetoturnoff(otherbuttonsto lose effectiveness).2)changecolor automatically . Press the button “MODEL” to turn on, hold on two seconds, Enter the automatic mode. Now the Ambientlightwillchangecolorautomatically every five seconds. Press the button “UP” to speed up the speed of changing color, when press the button fifth, the Ambientlightwillchangecolorautomatically every seconds. Press the button “DOWN” decelerate the speed of changing color, when press the button fifth, the Ambientlightwillchangecolorautomatically every seconds. 3)Pressthebutton“MODEL”again,turnbacktotheakindofcolormode,nowchangecolormanuallyandpressthebutton“UP”toturnonsoundcontrol,thenthe Ambientlightwillflashandchangecolorautomatically according to the music. Press the button “MODEL” again, it will flash in a kind of color. When it is flashing, press the button “MODEL” continuously to enter “changecolormanually” mode.
User manual 2． Functionalschematicdiagram 2.Instructions 1) Press the button “OPEN” on the remote, the TV Mount will extend and stop. 2) Press the button “LEFT,RIGHT,DOWN” to adjust the angle that you want. 3) Hold the button “MEMORY” long time and adjust the angle you want, then press the button “MEMORY” again, the red light turn off and this angle is saved. Press the button “OPEN” again,the TV Mount will turn back to midpoint automatically, then contraction, return and turn off; if you want to turn on again, press the button “MEMORY” only, then the TV Mount will restore the angle that you saved before turn off.
FCC ID: VII-SMMAL-T-1 IMPORTANT REGULATORY INFORMATION This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipments. 

Navigation menu