Edgecore Networks SMC7904WBRA-N2 Wireless N ADSL 2/2+ Modem Router User Manual number

Edgecore Networks Corporation Wireless N ADSL 2/2+ Modem Router number

USers Manual

      Four-port ADSL 2+ Wireless Router   User Manual  Ver 1.0
 i Contents 1 Safety Precautions ............................................................................................... 1 2 Overview ............................................................................................................... 2 2.1 Application ............................................................................................... 2 2.2 Features ................................................................................................... 2 2.3 Standards Compatibility and Compliance ............................................... 3 3 Hardware Description and Hardware Installation ................................................ 5 3.1 Hardware Description .............................................................................. 5 3.1.1 Front Panel ................................................................................... 5 3.1.2 Rear Panel .................................................................................... 6 3.2 Hardware Installation ............................................................................... 7 3.2.1 Choosing the Best Location for Wireless Operation ................... 7 3.2.2 Connecting the Device ................................................................. 7 4 PC Network Configuration and Login .................................................................. 9 4.1 PC Network Configuration ....................................................................... 9 4.2 Logging In to the DSL Router ................................................................ 11 5 Web-Based Management................................................................................... 13 5.1 Device Information ................................................................................. 13 5.1.1 Summary..................................................................................... 13 5.1.2 WAN ............................................................................................ 14 5.1.3 Statistics ...................................................................................... 15 5.1.4 LAN ............................................................................................. 15 5.1.5 WAN Service............................................................................... 15 5.1.6 xTM ............................................................................................. 16 5.1.7 xDSL ........................................................................................... 16 5.1.8 Route........................................................................................... 19 5.1.9 ARP ............................................................................................. 20 5.1.10 DHCP .................................................................................... 20 5.2 Advanced Setup .................................................................................... 20 5.2.1 Layer2 Interface .......................................................................... 21 5.2.2 WAN Service............................................................................... 25 5.2.3 LAN Configuration ...................................................................... 53 5.2.4 NAT ............................................................................................. 58 5.2.5 Security ....................................................................................... 62
 ii 5.2.6 Parental Control .......................................................................... 67 5.2.7 Quality of Service ....................................................................... 68 5.2.8 Routing ........................................................................................ 71 5.2.9 DNS ............................................................................................. 73 5.2.10 DSL ........................................................................................ 74 5.2.11 UPnP ..................................................................................... 75 5.2.12 DNS Proxy............................................................................. 76 5.2.13 Packet Acceleration .............................................................. 76 5.2.14 Interface Grouping ................................................................ 77 5.2.15 Multicast ................................................................................ 79 5.3 Wireless ................................................................................................. 79 5.3.1 Basic Settings ............................................................................. 80 5.3.2 Security ....................................................................................... 82 5.3.3 MAC Filter ................................................................................... 92 5.3.4 Wireless Bridge........................................................................... 94 5.3.5 Advanced Settings...................................................................... 94 5.3.6 Station Info .................................................................................. 96 5.4 Diagnostics ............................................................................................ 96 5.5 Management .......................................................................................... 97 5.5.1 Settings ....................................................................................... 98 5.5.2 System Log ................................................................................. 99 5.5.3 TR-69 Client .............................................................................. 101 5.5.4 Internet Time ............................................................................. 101 5.5.5 Access Control.......................................................................... 103 5.5.6 Update Software ....................................................................... 104 5.5.7 Reboot....................................................................................... 105 6 Q&A ................................................................................................................... 106
 1 1  Safety Precautions Read the following information carefully before operating the device. Please follow the following precaution items to protect the device from risks and damage caused by fire and electric power:   Use volume labels to mark the type of power.   Use the power adapter that is packed within the device package.   Pay attention to the power load of the outlet or prolonged lines. An overburden power outlet or damaged lines and plugs may cause electric shock or fire accident. Check the power cords regularly. If you find any damage, replace it at once.   Proper space left for heat dissipation is necessary to avoid any damage caused by overheating to the device. The holes on the device are designed for heat dissipation to ensure that the device works normally. Do not cover these heat dissipation holes.   Do not put this device close to a place where a heat source exits or high temperature occurs. Avoid the device from direct sunshine.   Do not put this device close to a place where is over damp or watery. Do not spill any fluid on this device.   Do not connect this device to any PC or electronic product, unless our customer engineer or your broadband provider instructs you to do this, because any wrong connection may cause any power or fire risk.   Do not place this device on an unstable surface or support.
 2 2  Overview The  DSL  Router  is  a  highly ADSL2+  Integrated Access  Device  and  can support ADSL  link  with  downstream  up  to  24  Mbps  and  upstream  up  to  1  Mbps.  It  is designed  to  provide  a  simple  and  cost-effective  ADSL  Internet  connection  for  a private  Ethernet  or  802.11g/802.11b/802.11n  wireless  network.  The  Router combines  high-speed  ADSL  Internet  connection,  IP  routing  for  the  LAN  and wireless connectivity in one package. It is usually preferred to provide high access performance  applications  for  the  individual  users,  the  SOHOs,  and  the  small enterprises. The Router is easy to install and use. The Modem connects to an Ethernet LAN or computers  via  standard  Ethernet  ports.  The  ADSL  connection  is  made  using ordinary  telephone  line  with  standard  connectors.  Multiple  workstations  can  be networked  and  connected  to the  Internet  by  a single Wide Area  Network  (WAN) interface  and  single  global  IP  address.  The  advanced  security  enhancements, packet filtering and port redirection, can help protect your network from potentially devastating intrusions by malicious agents from outside your network. Network  and  Router  management  is  done  through  the  web-based  management interface that can be accessed through the local Ethernet using any web browser. You may also enable remote management to enable configuration of the Router via the WAN interface. 2.1  Application   Home gateway   SOHOs   Small enterprises   Higher data rate broadband sharing   PC file and application sharing   Network and online gaming 2.2  Features   User-friendly GUI for web configuration
 3   Several pre-configured popular games. Just enable the game and the port settings are automatically configured.   Compatible with all standard Internet applications   Industry standard and interoperable DSL interface   Simple web-based status page displays a snapshot of system configuration, and links to the configuration pages   Downloadable flash software updates   Support for up to 16 permanent virtual circuits (PVC)   Support for up to 8 PPPOE sessions   Support NAT   WLAN with high-speed data transfer rates of up to 130 Mbps, compatible with IEEE 802.11b/g/n, 2.4GHz/5G compliant equipment   Optimized Linux 2.6 Operating System   IP routing and bridging   Asynchronous transfer mode (ATM) and digital subscriber line (DSL) support   Point-to-point protocol (PPP)   Network/port address translation (NAT/PAT)   Quality of service (QoS)   Wireless LAN security: WPA, 802.1x, RADIUS client   Virtual private network (VPN): IPSec   Universal plug-and-play   Management and control -  Web-based management (WBM) -  Command line interface (CLI) -  TR-069 WAN management protocol   Remote update   System statistics and monitoring   DSL router is targeted at the following platforms: DSL modems, wireless access points and bridge. 2.3  Standards Compatibility and Compliance   Support application level gateway (ALG)   ITU G.992.1 (G.dmt)   ITU G.992.2 (G.lite)   ITU G.994.1 (G.hs)
 4   ITU G.992.3 (ADSL2)   ITU G.992.5 (ADSL2+)   ANSI T1.413 Issue 2   IEEE 802.3   IEEE 802.3u   IEEE 802.11b   IEEE 802.11g   IEEE 802.11n
 5 3  Hardware Description and Hardware Installation 3.1  Hardware Description 3.1.1  Front Panel  Figure 1 Front panel  The following table describes the indicators on the front panel. Indicator Color Status Description Power Green On Power is on. Red On Power  is  on  and  the  device  is initiating. Red Blink The firmware is upgrading.  Off Power is off or the device is down. DSL Green On DSL link has established. Green Blink  twice  at every second No DSL link is detected. Green Blink  four  times  at every second DSL link is detected. - Off Device is powered off. Internet Green On PPP/DHCP takes effect. Green Blink PPP/DHCP is negotiating. Green Blink quickly Data is being transmitted. Red On Authentication fails. LAN 1/2/3/4 Green On The Ethernet interface is connected. Green Blink Data is being transmitted through the Ethernet interface.
 6 Indicator Color Status Description - Off The  Ethernet  interface  is disconnected. WLAN Green On WLAN is enabled. Green Blink Data is being transmitted through the wireless interface. - Off WLAN is disabled. WPS Green On Connection  succeeds  under  Wi-Fi Protected Setup. Green Blink Negotiation  is  in  progress  under Wi-Fi Protected Setup. - Off Wi-Fi Protected Setup is disabled. USB Green On USB device is connected. Green Blink Data is being transmitted. - Off USB device is disconnected.  3.1.2  Rear Panel  Figure 2 Rear panel The following table describes the interfaces or the buttons on the rear panel. Interface   Description Line RJ-11 port, for connecting the ADSL cable. WLAN WLAN switch, for enabling or disabling the WALN function. Reset Press the button for at least 1 second and then release it. System restores the factory default settings. WPS This button is used for enabling WPS PBC mode. If WPS is enabled, press this button, and then the wireless router starts to accept the negotiation of PBC mode. LAN 4~1 RJ-45 port, for connecting the router to a PC or another network
 7 Interface   Description device. USB USB port, for connecting the storage devices. Power Power interface, for connecting the power adapter.  Power switch    Warning: Do not press the Reset button unless you want to clear the current settings. The Reset button is in a small circular hole on the rear panel. If you want to restore the default settings, please press the Reset button gently for 1 second with a fine needle inserted into the hole and then release the button. The system reboots and returns to the factory defaults. The  power  specification  is  12V,  1.25A.  If  the  power  adapter  does  not  match  the specification, it may damage the device. 3.2  Hardware Installation 3.2.1  Choosing the Best Location for Wireless Operation Many  environmental  factors  may  affect  the  effective  wireless  function  of  the  DSL Router.  If  this  is  the  first  time  that  you  set  up  a  wireless  network  device,  read  the following information: The access point can be placed on a shelf or desktop, ideally you should be able to see the LED indicators in the front, as you may need to view them for troubleshooting. Designed to  go up to  100  meters indoors  and up to 300  meters outdoors,  wireless LAN lets you access your network from anywhere you want. However, the numbers of walls, ceilings, or other objects that the wireless signals must pass through limit signal range.  Typical  ranges  vary  depending  on  types  of  materials  and  background  RF noise in your home or business. 3.2.2  Connecting the Device Please follow the steps below to connect the device.   Step1  Connect the Line port of the DSL router with a telephone cable. Step2  Connect the LAN port of the DSL router to the network card of the PC via an Ethernet cable.
 8 Step3  Plug one end of the power adapter to the wall outlet and connect the other end to the Power port of the DSL Router. The followig figure displays the connection of the DSL router, PC, and telephones.  Figure 3 Connecting the DSL router
 9 4  PC Network Configuration and Login 4.1  PC Network Configuration Each network interface on the PC should either be configured with a statically defined IP address and DNS address, or be instructed to automatically obtain an IP address using the network DHCP server. DSL router provides a DHCP server on its LAN and it is recommended to configure your LAN to automatically obtain its IP address and DNS server IP address. The configuration principle is  identical but  should be carried  out  differently on  each operating system. The following displays the TCP/IP Properties dialog box on Windows XP.
 10  Figure 4 IP and DNS configuration  TCP/IP configuration steps for Windows XP are as follows: Step1  Choose Start > Control Panel > Network Connections. Step2  Right-click the Ethernet connection icon and choose Properties. Step3  On the General tab, select the Internet Protocol (TCP/IP) component and click Properties. Step4  The Internet Protocol (TCP/IP) Properties window appears.
 11 Step5  Select the Obtain an IP address automatically radio button. Step6  Select the Obtain DNS server address automatically radio button. Step7  Click OK to save the settings. 4.2  Logging In to the DSL Router To log in to the DSL router, do as follows: Step1  Open a Web browser on your computer. Step2  Enter http://192.168.1.1 (the default IP address of the DSL router) in the address bar. The login page appears. Step3  Enter the user name and the password. The default username and password of the super user are admin and gvt12345. The username and password of the common user are user and user. You need not enter the username and the password again if you select the option Remember my password. It is recommended to change these default values after logging in to the DSL router for the first time. Step4  Click OK to log in to the Web page. Otherwise, please click Cancel to exit the login page.
 12 Figure 5 Login page After logging in to the DSL router  as a super user, you can query, configure, and modify all the settings, and diagnose the system.
 13 5  Web-Based Management This chapter describes how to use Web-based management of the DSL router, which allows you to configure and control all of DSL router features and system parameters in a user-friendly GUI.   5.1  Device Information Choose Device Info, and the submenus of Device Info are shown as below:  Figure 6 Submenus of device info   5.1.1  Summary Choose Device Info > Summary, and the following page appears.
 14  Figure 7 Summary page This page displays the device information such as the board ID, software version, and the information of your WAN connection such as the upstream rate and the LAN IPv4 address. 5.1.2  WAN Choose Device Info > WAN and the following page appears.
 15 Figure 8 WAN information This  page  displays  the  information  of  the  WAN  interface,  such  as  the  connection status, IPv4 address, and connected time.   5.1.3  Statistics 5.1.4  LAN Choose Device Info > Statistics > LAN and the following page appears.    Figure 9 LAN statistical information In  this  page,  you  can  view  the  statistical  information  about  the  recevied  and transmitted data packets of the Ethernet and wireless interfaces.   Click Reset Statistics to restore the values to zero and recount them. 5.1.5  WAN Service Choose Device Info > Statistics > WAN Service and the following page appears.
 16  Figure 10 Statistical information of WAN service In  this  page,  you  can  view  the  statistical  information  about  the  recevied  and transmitted data packets of the WAN interface.   Click Reset Statistics to restore the values to zero and recount them. 5.1.6  xTM Choose Device Info > Statistics > xTM and the following page appears.  Figure 11 xTM statistical information In  this  page,  you  can  view  the  statistical  information  about  the  recevied  and transmitted data packets at the xTM interfaces.   Click the Reset button to restore the values to zero and recount them. 5.1.7  xDSL Choose Device Info > Statistics > xDSL and the following page appears.
 17
 18 Figure 12 xDSL statistical information In  this  page,  you  can  view  the  statistical  information  about  the  recevied  and transmitted data packets of the xDSL interfaces.   Click xDSL BER Test to test the xDSL Bit Error Rate.   Click Reset Statistics to restore the values to zero and recount them. xDSL BER Test Click xDSL BER Test to perform a bit error rate (BER) test on the DSL line. The test page is as follows:  Figure 13 ADSL BER test The Tested Time (sec) can be 1, 5, 10, 20, 60, 120, 180, 240, 300, or 360. Select a time in the drop-down list and click Start. The following pages appear.  Figure 14 ADSL BER test – running When the ADSL BER test completes, the following page appears.
 19  Figure 15 ADSL BER test result Note: If the BER reaches e-5, you cannot access the Internet. 5.1.8  Route Choose Device Info > Route and the following page appears.    Figure 16 Route table In this page, you can view the route table information.
 20 5.1.9  ARP Choose Device Info > ARP and the following page appears.    Figure 17 ARP table In this page, you can view the MAC address and IP address information of the device connected to the router. 5.1.10   DHCP Choose Device Info > DHCP and the following page appears.    Figure 18 DHCP list In  this  page,  you  can  view  the  host  name,  the  IP  address  assigned  by  the  DHCP server, the MAC address this is corresponding to the IP address, and the DHCP lease time.   5.2  Advanced Setup Choose  Advanced  Setup  and  the  submenus  of  Advanced  Setup  are  shown  as below:
 21  Figure 19 Submenus of advance setup   5.2.1  Layer2 Interface ATM Interface Choose  Advanced Setup >  Layer2  Interface > ATM Interface ,  and the following page appears.
 22 Figure 20 DSL ATM interface configuration In this page, you can add or remove the DSL ATM Interfaces. Click the Add button to display the following page.  Figure 21 ATM PVC configuration In this page, you can set the VPI and VCI values, and select the DSL latency, link type (EoA  is  for  PPPoE,  IPoE,  and  Bridge.),  connection  mode,  encapsulation  mode, service category, and IP QoS scheduler algorithm.    VPI (Virtual Path Identifier): The virtual path between two points in an ATM network, and its valid value is from 0 to 255.  VCI (Virtual Channel Identifier): The virtual channel between two points in an ATM network, ranging from 32 to 65535 (1 to 31 are reserved for known protocols).  Select DSL Latency: You may select Path0 and Path1.
 23  Select DSL Link Type: You may select EoA (it is for PPPoE, IPoE, and Bridge), PPPoA, or IPoA.  Select Connection Mode: You may select the Default Mode or the VLAN MUX Mode.  Encapsulation Mode: You may select LLC/SNAP-BRIDGING or VC/MUX in the drop-down list.  Service Category: you may select UBR Without PCR, UBR With PCR, CBR, Non Realtime VBR or Realtime VBR in the drop-down lsit.  Select IP QoS Scheduler Algorithm: You may select Strict Priority and Weighted Fair Queuing. Note: QoS cannot be set for CBR and Realtime VBR. After finishing setting,  click the Apply/Save  button to make the settings take effect. See the following figure:  Figure 22 Adding a DSL ATM interface If  you  want  to  remove  this  Interface,  please  select  the  Remove  check  box  that  is corresponding to the selected interface and then click the Remove button. ETH Interface Choose  Advanced  Setup > Layer2 Interface  > ETH Interface ,  and the following page appears.
 24  Figure 23 ETH WAN interface configuration In this page, you can add or remove the ETH WAN interfaces. Click the Add button to display the following page.  Figure 24 Configuring a ETH WAN interface In this page, select a ETH port and a proper connection mode, and then click  the Apply/Save button to make the settings take effect. See the following figure:
 25  Figure 25 Adding a ETH WAN interface If  you  want  to  remove  this  Interface,  please  select  the  Remove  check  box  that  is corresponding to the selected interface and then click the Remove button. 5.2.2  WAN Service Choose Advance Setup > WAN Service, and the following page appears.  Figure 26 WAN service configuration In this page, you are allowed to add, remove, or edit a WAN service. Adding a PPPoE WAN Service This  section  describes  the  steps  for  adding  the  pppoe_0_0_35  (PPPoE  mode) service. Step1  In the Wide Area Network (WAN) Service Setup page, click the Add button to display the following page. (At first, you must add a proper ATM configuration for this WAN service.)
 26  Figure 27 WAN service interface configuration (PPPoE)  Step2  In this page, you can select a ATM Interface for the WAN service. After selecting the ATM interface, click Next to display the following page.
 27  Figure 28 WAN service configuration (PPPoE) Step3  In this page, select the WAN service type to be PPP over Ethernet (PPPoE). Click Next to display the following page.
 28  Figure 29 PPP username and password (PPPoE)  Step4  In this page, you can modify the PPP username, PPP password, PPPoE service name and authentication method.  PPP Username: The correct user name provided by your ISP.  PPP Password: The correct password provided by your ISP.
 29  PPPoE Service Name: If your ISP provides it to you, please enter it. If not, do not enter any information.  Authentication Method: The value can be AUTO, PAP, CHAP, or MSCHAP. Usually, you can select AUTO.  Config KeepAlive: Whether to let the PPPoE dial-up keep alive.  Enable Fullcone NAT:. NAT is one where all requests from the same internal IP address and port are mapped to the same external IP address and port. Furthermore, any external host can send a packet to the internal host, by sending a packet to the mapped external address.  Dial on demand (with idle timeout timer): If this function is enabled, you need to enter the idle timeout time. Within the preset minutes, if the modem does not detect the flow of the user continuously, the modem automatically stops the PPPOE connection. Once it detects the flow (like access to a webpage), the modem restarts the PPPoE dialup. If this function is disabled, the modem performs PPPoE dial-up all the time. The PPPoE connnection does not stop, unless the modem is powered off and DSLAM or uplink equipment is abnormal.  PPP IP extension: If you want to configure DMZ Host, you should enable it first.  Enable Firewall:If you want WAN connection to be safer,you should enable firewall.  Use Static IPv4 Address: If this function is disabled, the modem obtains an IP address assigned by an uplink equipment such as BAS, through PPPoE dial-up. If this function is enabled, the modem uses this IP address as the WAN IP address.  Enable PPP Debug Mode:Enable or disable this function.  Bridge PPPoE Frames Between WAN and Local Ports:Enable or disable this function.  Enable IGMP Multicast Proxy:if you want PPPoE mode to support IPTV, enable it. Step5  After setting the parameters, click Next to display the following page.
 30  Figure 30 Routing-default gateway (PPPoE)  Step6  In this page, select a preferred WAN interface as the system default gateway and then click Next to display the following page.
 31  Figure 31 DNS server configuration(PPPoE)  Step7  In this page, you may obtain the DNS server addresses from the selected WAN interface or manually enter the static DNS server addresses. If only a PVC with IPoA or static MER protocol is configured, you must manually enter the static DNS server addresses. Click Next, and the following page appears.
 32  Figure 32 PPPoE summary  Step8  In this page, it displays the information about the PPPoE settngs. Click Apply/Save to save and apply the settings, and then the following page appears. You can modify the settings by clicking the Back button if necessary.  Figure 33 Completing the settings of PPPoE WAN service Adding a MER (IPoE) WAN service This section describes the steps for adding the ipoe_0_0_36 (MER mode) service. Step1  In the Wide Area Network (WAN) Service Setup page, click the Add button to display the following page. (At first, you must add a ATM configuration for this WAN service.)
 33  Figure 34 WAN service interface configuration (IPoE)  Step2  Select  an  ATM  Interface,  for  example,  atm1/(0_0_36),  and  then  click Next to display the following page.
 34  Figure 35 WAN service configuration (IPoE)  Step3  In this page, select the WAN service type to be IP over  Ethernet,  and r the  service  description.  After  finishing  setting,  click  Next  to  display  the following page.
 35  Figure 36 WAN IP settings (IPoE)  Step4  In  this  page,  you  may  themodify  the  WAN  IP  settings.  You  may  select obtain  an  IP  address  automatically  or  manually  enter  the  IP  address provided by your ISP. Click Next and the following page appears. Note: If selecting Obtain an IP address automatically, DHCP will be enabled for PVC in MER mode.   If selecting Use the following Static IP address, please enter the WAN IP address, subnet mask and gateway IP address.
 36  Figure 37 Network address translation settings (IPoE)  Step5  In  this  page,  you  can  set  the  network  address  translation  settings,for example,  enabling NAT, enabling firewall,  and.enabling IGMP  multicast. After finishing setting, click Next and the following page appears.  Figure 38 Routing-default gateway (IPoE)  Step6  In  this  page,  select  a  preferred  WAN  interface  as  the  system  default gateway and then click Next to display the following page.
 37  Figure 39 DNS server configuration (IPoE)  Step7  In this page, you may obtain the DNS server addresses from the selected WAN interface or manually  enter static DNS server  addresses. If only  a PVC with IPoA or static MER protocol is configured, you must enter  the static DNS server addresses. After finishing setting, click Next to display the following page.
 38  Figure 40 IPoE summary  Step8  In this page, it displays the information about the IPoE settngs.Click Apply/Save to save and apply the settings, and then the following page appears. You can modify the settings by clicking the Back button if necessary.  Figure 41 Completing the settings of IPoA WAN service Adding a PPPoA WAN service This  section  describes  the  steps  for  adding  the  pppoa_0_0_37  (PPPoA  mode) service. Step1  Choose  Advanced  Setup >  Layer2  Interface  >  ATM  Interface  to dsipaly  the  DSL  ATM Interface  Configuration page. In  this page,  you need to  add  a PVC for PPPoA  mode. Click  the  Add  button in  the  DSL ATM Interface Configuration page to display the following page.
 39  Figure 42 ATM PVC configuration (PPPoA)  Step2  Select  the  DSL  link  type  to  be  PPPoA, and  select  the  encapsulation mode to be VC/MUX (according to the uplink equipment). After finishing setting,  click  the  Apply/Save  button  to  apply  the  setings,  and  the following page appears.  Figure 43 Adding a DSL ATM interface for PPPoA service
 40 Step3  Choose WAN Service and click Add to display the following page.  Figure 44 WAN service interface configuration (PPPoA)  Step4  Select the proper interface for  the WAN service, and then click Next to display the following page.  Figure 45 WAN service configuration (PPPoA)
 41 Step5  In  this  page,  you  may  modify  the  service  description.  Click  Next  to display the following page.  Figure 46 PPP username and password (PPPoA)  Step6  In  this  page,  you  can  enter  the  PPP  username  and  PPP  password provided by your ISP. Select the authentication method according to your requirement.  After  finishing  setting,  click  Next  to  display  the  following page.
 42  Figure 47 Routing-default gateway (PPPoA)  Step7  In  this  page,  select  a  preferred  WAN  interface  as  the  system  default gateway and then click Next to display the following page.
 43  Figure 48 DNS server configuration (PPPoA)  Step8  In this page, you can obtain the DNS server addresses from the selected WAN interface or manually enter the static DNS server addresses. If only a PVC with IPoA or static MER protocol is configured, you must enter the static DNS server addresses. After finishing setting, click Next to display the following page.
 44  Figure 49 PPPoA summary  Step9  In  this  page,  it  displays  the  information  about  the  PPPoA  settngs.Click Apply/Save to apply the settings, and then the following page appears. You can modify the settings by clicking the Back button if necessary.  Figure 50 Completing the settings of PPPoA WAN service Adding an IPoA WAN service This section describes the steps for adding the ipoa_0_0_38 (IPoA mode). Step1  Choose  Advanced  Setup  > Layer2  Interface > ATM  Interface  to dsipaly  the  DSL  ATM Interface  Configuration page.  In this page,  you need to add a PVC for IPoA mode. Click the Add button in the DSL ATM Interface Configuration page to display the following page.
 45  Figure 51 ATM PVC configuration (IPoA)  Step2  Select the DSL link type to be IPoA, and select the encapsulation mode to  be  LLC/SNAP-ROUTING  (according  to  the  uplink  equipment).  After finishing  setting,  click  the  Apply/Save  button  to  display  the  following page.  Figure 52 Adding a DSL ATM interface for IPoA service  Step3  Choose WAN Service and click Add to display the following page.
 46  Figure 53 WAN service interface configuration (IPoA)  Step4  Select the proper interface for  the WAN service ,and then click  Next to display the following page.  Figure 54 WAN service configuration (IPoA)
 47 Step5  In  this  page,  you  may  modify  the  service  description.  Click  Next  to display the following page.  Figure 55 WAN IP settings (IPoA)  Step6  In  this  page,  enter  the  WAN  IP  address  and  the  WAN  subnet  mask provided by your ISP and then click Next to display the following page.  Figure 56 Network address translation settings (IPoA)  In  this  page,  Network  Address  Translation  (NAT)  allows  you  to  share  one  Wide Area  Network  (WAN)  IP  address  for  multiple  computers  on  your  Local  Area Network (LAN). If  you  do  not  want  to  enable  NAT,  and  wish  the  user  of  modem  to  access  the Internet normally, you need to add a route on the uplink equipment. Otherwise, the access to the Internet fails. Normally, please enable the NAT function. Step7  After finishing setting, click Next to display the following page.
 48  Figure 57 Routing-default gateway (IPoA)  Step8  In  this  page,  select  a  preferred  WAN  interface  as  the  system  default gateway and then click Next to display the following page.
 49  Figure 58 DNS server configuration (IPoA)  Step9  In  this  page,  you  should  use  a  static  DNS  IP  address  for  IPoA  mode. Select the proper DNS server interface and enter the primary DNS server and the secondary DNS server. Click Next to display the following page.
 50  Figure 59 IPoA summary  Step10  In  this  page,  it  displays  the  information  about  the  IPoA  settngs.  Click Apply/Save to save and apply the settings, and then the following page appears.  You  can  modify  the  settings  by  clicking  the  Back  button  if necessary.  Figure 60 Completing the settings of IPoA WAN service Adding a Bridge WAN service This section describes the steps for adding the br_0_0_39 (Bridge mode) service. Step1  In the Wide Area Network (WAN) Service Setup page, click the Add button to display the following page. (At first, you must add a proper ATM
 51 configuration for this WAN service.) Click the Add button to display the following page.  Figure 61 WAN service interface configuration (bridge)  Step2  Select the proper ATM Interface, for example atm3/(0_0_39) and then click Next to display the following page.
 52  Figure 62 WAN service configuration (bridge)  Step3  In this page, you can select the WAN service type, and modify the service description. After finishing setting, click Next to display the following page.  Figure 63 Bridge summary  Step4  In  this  page,  it  displays  the  information  about  the  bridge  settngs.  Click Apply/Save to save and apply the settings, and then the following page
 53 appears.  You  can  modify  the  settings  by  clicking  the  Back  button  if necessary.  Figure 64 Completing the settings of bridge WAN service 5.2.3  LAN Configuration Choose Advanced Setup > LAN, and the following page appears.
 54  Figure 65 LAN setup  In  this  page,  you  can  configure  an  IP  address  for  the  DSL  router,  enable  IGMP snooping, enable the LAN side firewall, enable or disable the DHCP server, edit the DHCP option, configure the DHCP advanced setup and set the  binding between a MAC address and an IP address.
 55 Configuring the Private IP Address for the DSL Router  Figure 66 Configuring the IP address of the DSL router  In this page, you can modify the IP address  of the device. The preset IP address is 192.168.1.1. Enabling IGMP Snooping IGMP snooping enables the router to forward multicast traffic intelligently, instead of flooding  all  ports  in  the  VLAN.  With  IGMP  snooping,  the  router  listens  to  IGMP membership reports, queries and leave messages to identify the switch ports that are members of multicast groups. Multicast traffic will only be forwarded to ports identified as members of the specific multicast group or groups.  Figure 67 Configuring the IGMP snooping  In  this  page,  you  can  enable  the  IGMP  snooping  and  select  the  proper  mode  for IGMP snooping. Enabling the LAN Side Firewall Firewall can prevent unexpected traffic on the Internet from your host in the LAN.  Figure 68 Setting the LAN side firewall  In this page, you can enable or disable the LAN side firewall.
 56 Configuring the DHCP Server  Figure 69 Setting the DHCP server  If  you  enable  the DHCP sever,  the clients  will  automatically acquire the  IP  address from the DHCP server. If the DHCP server is disabled, you need to manually set the start IP address, end IP address and the lease time for the clients in the LAN. Editing the DHCP Option Click the Edit DHCP Option button in the Local Area Network (LAN) Setup page to display the DHCP Option Setup page.    Figure 70 Configuring the DHCP options  In this page, you can add, edit or delete the DHCP options, and these options will be sent to the DHCP client. Editing the DHCP Option60 Click the Edit DHCP Option60 button in the Local Area Network (LAN) Setup page to display the DHCP Option60 Setup page.
 57  Figure 71 Configuring the DHCP60 options  In this page, you can add, edit or delete the DHCP60 options. Configuring the DHCP Static IP Lease List The lease list  of static IP address can reserve the static IP addresses for the hosts with the specific MAC addresses. When a  host whose MAC address is in the lease list of static IP address requests the DHCP server for an IP address, the DHCP server assigns the reserved IP address to the host.  Figure 72 DHCP static lease list  Click  the  Add  Entries  button  in  the  Local  Area  Network  (LAN)  Setup  page  to display the DHCP Static IP Lease page.  Figure 73 Adding an entry of DHCP static IP lease list
 58 In this page, enter the MAC address of the LAN host and the static IP address that is reserved for the host, and then click the Apply/Save button to apply the settings. Configuring the Second IP Address and Subnet Mask for a LAN Interface In the Local Area Network (LAN) Setup page, you are allowed to set the second IP address and the subnet mask for a LAN interface.  Figure 74 Setting the second IP address and subnet mask  After  enabling  Configure  the  second  IP  Address  and  Subnet  Mask  for  LAN interface, enter an IP address and a subnet mask for the LAN interface.   After finishing setting, click the Apply/Save button to apply the settings. 5.2.4  NAT Note: The NAT information is not displayed in the bridge mode. Virtual Servers Firewall  can prevent  unexpected  traffic  on the  Internet from  your  host  on the LAN. The virtual server can create a channel that can pass through the firewall. In that case, the host on the Internet can communicate with a host on your LAN within certain port range. Choose Advanced Setup > NAT > Virtual Servers, and the following page appears.
 59 Figure 75 Virtual server setup  In this page, you are allowed to add or remove a virtual server entry. To add a virtual server, do as follows: Click the Add button to display the following page.  Figure 76 Adding an entry of virtual server  Use interface: Select an interface that you want to configure.  Select a Service: Select a proper service in the drop-down list.  Custom  Server:  Enter  a  new  service  name  to  establish  a  user  service type.  Server IP Address: Assign an IP address to virtual server.
 60  External  Port  Start:  When  selecting  a  service,  the  port  number  will automatically be displayed. You can modify it if necessary.  External  Port  End:  When  selecting  a  service,  the  port  number  will automatically be displayed. You can modify it if necessary.  Protocol: You may select TCP/UDP, TCP, or UDP in the drop-down list.  Internal  Port  Start:  When  selecting  a  service,  the  port  number  will automatically be displayed. You can modify it if necessary.  Internal  Port  End:  When  selecting  a  service,  the  port  number  will automatically be displayed. You can modify it if necessary. After finishing setting, click Save/Apply to save and apply the settings. Port Triggering Some  applications  need  some  ports  to  be  opened  in  the  firewall  for  the  remote access. When an application initializes a TCP/UDP to connect to a remote user, port triggering dynamically opens the open ports of the firewall. Choose  Advanced  Settings >  NAT >  Port  Triggering,  and  the  following  page appears.  Figure 77 Port triggering setup  In this page, you may add or delete an entry of port triggering. Click the Add button to display the following page.
 61  Figure 78 Adding an entry of port triggering   Use interface: Select an interface that you want to configure.  Select an application: Select a proper application in the drop-down list.  Custom application: Manually define an application.  Trigger port Start: The start port number that LAN uses to trigger the open port.  Trigger port End: The end port number that LAN uses to trigger the open port.  Trigger Protocol: Select the application protocol. You may select TCP/UDP, TCP, or UDP.  Open Port Start: The start port number that is opened to WAN.    Open Port End: The end port number that is opened to WAN.  Open Protocol: Select the proper protocol that is opened to WAN. You may select TCP/UDP, TCP, or UDP. After finishing setting, click Save/Apply to apply the settings.
 62 Note: You can use a single port number, several port numbers separated by commas, port blocks  consisting of  two  port  numbers  separated  by  a  dash,  or any  combination  of these, for example 80, 90-140, 180. DMZ Host DMZ allows all the ports of a PC on your LAN to be exposed to the Internet. Set the IP address  of  the  PC  to  be  DMZ  host,  so  that  the  DMZ  host  will  not  be  blocked  by firewall. Choose Advanced Setup > NAT > DMZ host to display the following page.  Figure 79 DMZ host  In this page, enter the IP address of the DMZ host. After finishing the settings, click the Apply/Save button to apply the settings. If you want to clear the DMZ function of the host, please delete the IP address of the host in the field of DMZ Host IP Address, and then click the Apply/Save button. 5.2.5  Security By default, the firewall is enabled. The firewall is used to block  the file transmission between the Internet and your PC. It serves as a safety guard and permits only the authorized files to be sent to the LAN.  Note: If the DSL router is configured to be bridge mode, IP filtering is disabled and the IP filtering interface does not appear. Outgoing IP Filtering Setup When  the  outgoing  IP  filtering  settings  is  enabled  on  the  DSL  router,  the  security functions for the local network are enabled at the same time.   Choose Security > IP Filtering > Outgoing and the following page appears.
 63  Figure 80 Outgoing IP filtering setup By  default,  all  outgoing  IP  traffic  from  LAN  is  allowed,  but  some  IP  traffic  can  be blocked by setting filters. In this page, you can add or remove the outgoing IP filtering rules. Click the Add button to display the following page.  Figure 81 Adding an IP outgoing filtering rule In  this  page,  you  can  create  a  filter  rule  to  identify  the  outgoing  IP  traffic  by specifying a new filter name and at least one condition.  Filter Name: Set the filter name.  IP Version: Select the proper IP version in the drop-down list.  Protocol: Select a protocol that needs to be filtered.  Source IP address [/prefix length]: Set the range of local IP address.  Source Port (port or port: port): Set the local port.  Destination IP address [/prefix length]: Set the range of IP address of the exterior network.  Destination Port (port or port: port): Set the port of the exterior network. After finishing setting, click Apply/Save to save and activate the filtering rule.
 64 Incoming IP Filtering Setup The incoming IP filter is used to block and permit the IP packet transmisstion from the internet.   Choose Security > IP Filtering > Incoming and the following page appears.  Figure 82 Incoming IP filtering setup  In this page, you can add or remove the incoming IP filtering rules. Click the Add button to display the following page.  Figure 83 Adding an IP incoming filtering rule
 65 In  this  page,  you  can  create  a  filter  rule  to  identify  the  incoming  IP  traffic  by specifying  a  new  filter  name  and  at  least  one  condition,  and  you  must  select  at least one WAN interface for the rule.    Filter Name: Set the filter name.  IP Version: Select the proper IP version in the drop-down list.  Protocol: Select a protocol that needs to be filtered.  Source IP address [/prefix length]: Set the range of local IP address.  Source Port (port or port: port): Set the local port.  Destination IP address [/prefix length]: Set the range of IP address of the exterior network.  Destination Port (port or port: port): Set the port of the exterior network. After finishing setting, click Apply/Save to save and activate the filtering rule. MAC Filtering Setup In some cases, you may want to manage Layer2 MAC address to block or permit a computer within the home network. When you enable MAC filter rules, the DSL router serves as a firewall that works at layer 2. Note: MAC filtering is  only effective on ATM PVCs configured  in  bridge  mode. If the ATM PVCs  are  configured  in  other  routing  modes  (such  as  PPPoE  mode),  the  MAC Filtering Setup page does not be configured. Choose Security > MAC Filtering and the following page appears.
 66  Figure 84 MAC filtering setup  In this page, you can add or remove the MAC filtering rule. You may change the MAC filtering  policy  from  FORWARDED  to  BLOCKED  by  clicking  the  Change  Policy button.   Click the Add button to display the following page.  Figure 85 Adding a MAC filter  Protocol Type: Select the proper protocol type.  Destination MAC Address: Enter the destination MAC address.
 67  Source MAC Address: Enter the source MAC address.  Frame Direction: The direction of transmission frame.  WAN  Interface (Configured  in  bridge  mode  only):  Select  the  proper WAN interface in the drop-down list. After finishing setting, click Apply/Save to save and apply the filtering rule. 5.2.6  Parental Control Time Restriction Choose Advanced Setup > Parental Control > Time Restriction, and the following page appears.  Figure 86 Time restriction setup Click the Add button to display the following page.  Figure 87 Adding a time restriction rule This page is used to control the time restriction to a special LAN device that connects to the DSL router. In this page, se the user name and configure the time settings.   After finishing setting, click Apply/Save to save and apply the settings.
 68 5.2.7  Quality of Service Enabling QoS Choose Advance Setup > Quality of Service and the following page appears.  Figure 88 QoS queue management configuration Select Enable QoS to enable QoS and configure the default DSCP mark.  Figure 89 Enabling QoS In this page, enable the QoS function and select the default DSCP mark. After finishing setting, click Apply/Save to save and apply the settings.  Note:
 69 If the Enable Qos checkbox is not selected, all QoS will be disabled for all interfaces. The  default DSCP  mark  is  used  to  mark  all  egress packets that  do  not  match  any classification rules. Queue Config Choose Advanced Setup > Quality of Service > Queue Config, and the following page appears.    Figure 90 QoS queue setup  In this page, you can enable, add or remove a QoS rule.
 70  Note: The lower integer value for precedence indicates the higher priority.  Click the Add button to display the following page.  Figure 91 Adding a QoS queue  Name: Enter the name of QoS queue.  Enable: Enable or disable the QoS queue.  Interface: Select the proper interface for the QoS queue. After finishing setting, click Apply/Save to save and apply the settings. QoS Classification Choose  Advanced  Setup  >  Quality  of  Service  >  Qos  Classification  and  the following page appears.  Figure 92 QoS classification setup In this page, you can enable, add or remove a QoS classification rule. Click the Add button to display the following page.
 71  Figure 93 Adding a QoS classification rule  In  this  page,  enter  the  traffic  name,  select  the  rule  order  and  the  rule  status,  and specify the classification criteria and the classification results.   After finishing setting, click Apply/Save to save and apply the settings. 5.2.8  Routing Default Gateway Choose  Advanced  Setup  >  Routing  >  Default  Gateway,  and  the  following  page appears.
 72  Figure 94 Default gateway setup  In this page, you can modify the default gateway settings. Select a proper WAN interface in the drop-down list  of  Selected WAN Interface  as the system default gateway.   After finishing setting, click Apply/Save to save and apply the settings. Static Route Choose Advanced Setup > Routing > Static Route and the following page appears.  Figure 95 Static routing setup  In this page, you can add or remove a static routing rule of IPV4. Click the Add button to display the following page.
 73  Figure 96 Adding a static routing rule  IP Version: Select the IP version to be IPv4.  Destination IP address/prefix length: Enter the destination IP address.  Interface: select the proper interface for the rule.  Gateway IP Address: The next-hop IP address.  Metric: The metric value of routing. After finishing setting, click Apply/Save to save and apply the settings. 5.2.9  DNS DNS Server Choose Advanced Setup > DNS > DNS Server and the following page appears.
 74  Figure 97 DNS server configuration  In  this  page,  you  can  select  a  DNS  server  interface  from  the  available  interfaces, manually  enter the DNS server addresses, or obtain the DNS address from a WAN interface. After finishing setting, click Apply/Save to save and apply the settings. 5.2.10   DSL Choose Advanced Setup > DSL and the following page appears.
 75  Figure 98 DSL settings  In this page,  you can set the DSL settings. Usually, you  do not need  to  modify the factory default settings.   After finishing setting, click Apply/Save to save and apply the settings. 5.2.11   UPnP Choose Advanced Setup > UPnP and the following page appears.
 76  Figure 99 UPnP configuration  In this page, you can enable or disable the UPnP function. After finishing setting, click Apply/Save to save and apply the settings. 5.2.12   DNS Proxy Choose Advanced Setup > DNS Proxy and the following page appears.  Figure 100 DNS proxy configuration  In this page, you can enable or disable the DNS proxy function. After enabling the DNS proxy function, enter the host name of the broadband router and the domain name  of the  LAN network,  and then click  Apply/Save to save  and apply the settings. 5.2.13   Packet Acceleration Choose Advanced Setup > Packet Acceleration and the following page appears.
 77  Figure 101 Packet Acceleration  In this page, you can enable or disable Packet Flow Accelerator. After finishing setting, click Apply/Save to save and apply the settings. 5.2.14   Interface Grouping Choose Advanced Setup > Interface Grouping and the following page appears.  Figure 102 Interface grouping configuration  Interface grouping supports multiple ports to PVC  and bridging groups. Each group will  perform  as  an  independent  network.  To  support  this  feature,  you  must  create mapping groups with the appropriate LAN and WAN interfaces using the Add button. The Remove  button will remove the grouping  and  add the ungrouped interfaces to the default group. Only the default group has IP interface.
 78 Click the Add button to display the following page.  Figure 103 Adding a new interface group  In  this  page,  please  follow  the  on-screen  configuration  steps  to  configure  the parameters of the interface grouping. After finishing setting, click Apply/Save to save and apply the settings.
 79 5.2.15   Multicast Choose Advanced Setup > Multicast and the following page appears.  Figure 104 Multicast configuration  In this page, you can configure the multicast parameters of the IPv4. After finishing setting, click Apply/Save to save and apply the settings. 5.3  Wireless Choose Wireless and the submenus of Wireless are shown as below:
 80  Figure 105 Submenus of wireless settings 5.3.1  Basic Settings Choose Wireless > Basic to display the following page.
 81  Figure 106 Wireless basic configuration  This page allows you to configure the basic features of the wireless LAN interface.  Enable Wireless: Enable or disable the wireless function.  Hide Access Point: if you want to hide any access point for your router, select this option, and then a station cannot obtain the SSID through the passive scanning.  Clients Isolation: When many clients connect to the same access point, they can access each other. If you want to disable the access between the clients that connect to the same access point, you can select this option.  Disable WMM Advertise: After enabling this option, the transmission performance multimedia of the voice and video data can be improved.
 82  Enable Wireless Multicast Forwarding (WMF): After enabling this option, the transmission quality of video service such as IPTV can be improved.    SSID: For the security reason, you should change the default SSID to a unique name.  BSSID: Display the MAC address of the wireless interface.  Country: The name of the country with which your gateway is configured. This parameter further specifies your wireless connection. For example, The channel will adjust according to nations to adapt to each nation's frequency provision.  Max Clients: Specify the maximum wireless client stations to be enabled to link with AP. Once the clients exceed the max vlaue, all other clients are refused. The value of maximum clients is 16.  Wireless - Guest/Virtual Access Points: If you want to make Guest/Virtual network function be available, you have to check those boxes in the table below. In the current software version, three virtual access points can be configured. After finishing setting, click Apply/Save to save the basic wireless settings and make the settings take effect. 5.3.2  Security Choose Wireless > Security to display the following page.
 83  Figure 107 Wireless security configuration  This page allows you to configure the security features of the wireless LAN interface. In this page, you can configure the network security settings by the Wi-Fi Protected Setup (WPS) method or setting the network authentication mode.    WPS Setup
 84  Figure 108 WPS setup  There are 2 primary methods used in the Wi-Fi Protected Setup: -  PIN entry, a mandatory method of setup for all WPS certified devices. -  Push button configuration (PBC), an actual push button on the hardware or through a simulated  push  button in the software. (This  is  an optional  method  on wireless client). If  you  are  using  the  PIN  method,  you  will  need  a  Registrar  (access  point/wireless router)  to  initiate  the  registration  between  a  new  device  and  an  active  access point/wireless router. (Note: The PBC method may also need a Registrar when used in a special case where the PIN is all zeros) In  order  to  use  the  push-button  for WPS  authentication,  you  must  ensure  that  the network card support the function. if it supports, you need not to do any configuration. You can press the WPS button directly to enable the WPS function.  Manual Setup AP This page provides 9 types of network authentication modes, including Open, Shared, 802.1X,  WPA,  WPA-PSK,  WPA2,  WPA2-PSK,  Mixed  WPA2/WPA,  and  Mixed WPA2/WPA-PSK.
 85  Figure 109 Manual setup AP  -  Open Mode  Figure 110 Open mode   Select SSID: Select a SSID for configuring the security settings.  Network Authentication: Select the Open mode.
 86  WEP Encryption: Enable or disable WEP encryption. After enabling this function, you can set the encryption strength, current network key, and network keys.  Encryption Strength: You can set 64-bit or 128-bit key.  Current Network Key: The current key that you use.  Network Key1/2/3/4: Set the network key. If it is 128-bit key, you need to enter 13 ASCII characters or 26 hexadecimal digits. For the 64-bit key, you need to enter 5 ASCII characters or 10 hexadecimal digits.  -  Shared Mode  Figure 111 Shared mode  The parameters’ description of shared mode, please refer to the Open Mode.  -  802.1x
 87  Figure 112 802.1x mode  Select SSID: Select a SSID for configuring the security settings.  Network Authentication: Select the 802.1X in the drop-down list.  RADIUS Server IP Address: Enter the IP address of the RADIUS server. RADIUS server is used to authenticate the hosts on the wireless network.  RADIUS Port: The port number that the RADIUS server uses. The default port number is 1812. You may change it according to the server setting.  RADIUS Key: Set the RADIUS key for accessing the RADIUS server.  WEP Encryption: You can only select Enabled.  Encryption Strength: You can set 64-bit or 128-bit key.  Current Network Key: The current key that you use.  Network Key1/2/3/4: Set the network key. If it is 128-bit key, you need to enter 13 ASCII characters or 26 hexadecimal digits. For the 64-bit key, you need to enter 5 ASCII characters or 10 hexadecimal digits.  -  WPA Mode
 88  Figure 113 WPA mode   Select SSID: Select a SSID for configuring the security settings.  Network Authentication: Select the WPA-PSK mode.  WPA Group Rekey Interval: Setting the interval for renewing key.  RADIUS Server IP Address: Enter the IP address of the RADIUS server. RADIUS server is used to authenticate the hosts on the wireless network.  RADIUS Port: The port number that the RADIUS server uses. The default port number is 1812. You may change it according to the server setting.  RADIUS Key: Set the RADIUS key for accessing the RADIUS server.  WPA/WAPI Encryption: You may select AES, or TKIP+AES.  -  WPA-PSK Mode
 89  Figure 114 WPA-PSK mode  Select SSID: Select a SSID for configuring the security settings.  Network Authentication: Select the WPA-PSK mode.  WPA/WAPI passphrase: The key for WPA encryption. Click the Click here to display button to display the current key. The default key is 87654321.  WPA Group Rekey Interval: Setting the interval for renewing key.  WPA/WAPI Encryption: You may select AES, or TKIP+AES.  -  WPA2 Mode
 90  Figure 115 WPA2 Mode  Select SSID: Select a SSID for configuring the security settings.  Network Authentication: Select the WPA2 mode.  WPA2 Preauthentication: Enable or disable pre-authentication.  Network Re-auth Interval: Set the network re-auth interval.  WPA Group Rekey Interval: Setting the interval for renewing key.  RADIUS Server IP Address: Enter the IP address of the RADIUS server. RADIUS server is used to authenticate the hosts on the wireless network.  RADIUS Port: The port number that the RADIUS server uses. The default port number is 1812. You may change it according to the server setting.  RADIUS Key: Set the RADIUS key for accessing the RADIUS server.  WPA/WAPI Encryption: You may select AES, or TKIP+AES.  -  WPA2-PSK
 91  Figure 116 WPA2-PSK mode The  parameters’  description  of  WPA2-PSK  mode,  please  refer  to  the  WPA-PSK mode.  -  Mixed WPA2/WPA  Figure 117 Mixed WPA2/WPA
 92 The parameters’ description  of  Mixed WPA2/WPA  mode, please refer to  the  WPA2 mode.  -  Mixed WPA2/WPA-PSK  Figure 118 Mixed WPA2/WPA-PSK mode  The  parameters’  description  of  Mixed  WPA2/WPA-PSK  mode,  please  refer  to  the WPA-PSK mode. 5.3.3  MAC Filter Choose Wireless > MAC Filter to display the following page.
 93  Figure 119 MAC filter configuration  This page is used to allow or reject the wireless clients to access the wireless network of the wireless router. In this page, you can add or remove the MAC filters. The MAC restrict modes include Disabled, Allow, and Deny.    Disabled: Disable the wireless MAC address filtering function.  Allow: Allow the wireless clients with the MAC addresses in the MAC Address list to access the wireless network of the wireless router.  Deny: Reject the wireless clients with the MAC addresses in the MAC Address list to access the wireless network of the wireless router. Click the Add button to display the following page.
 94  Figure 120 Adding a MAC filter In  this  page,  enter  the  MAC  address  of  the  wireless  client,  and  then  click  the Apply/Save button to add the MAC address to the MAC address list.   5.3.4  Wireless Bridge Choose Wireless > Wireless Bridge to display the following page.  Figure 121 Wireless bridge configuration  This page allows  you to configure  the  wireless bridge features  of the  wireless  LAN interface.  AP mode: you may select Access Point or Wireless Bridge.  Bridge Restrict: Enable or disable the bridge restrict function.  Remote Bridges MAC Address: Enter the remote bridge MAC address. After finishing setting, click the Apply/Save button to save and apply the settings. 5.3.5  Advanced Settings Choose Wireless > Advanced to display the following page.
 95  Figure 122 Wireless advanced settings This  page  allows  you  to  configure  the  advanced  features  of  the  wireless  LAN interface. Usually, you do not need to change the settings in this page.    Note: The advanced wireless setting is only for the advanced user. For the common user, do not change any settings in this page.
 96 5.3.6  Station Info Choose Wireless > Station Info to display the following page.  Figure 123 Station information This page shows the authenticated wireless stations and their status. 5.4  Diagnostics Choose Diagnostics, and the following page appears.
 97  Figure 124 Diagnostics configuration  This page is used to test the connection to your local network, the connection to your DSL service provider, and the connection to your Internet service provider.   You may diagnose the connection by clicking the Test button or click the Test With OAMF4 button. 5.5  Management Choose Management and the submenus of Management are shown as below:
 98  Figure 125 Submenus of management 5.5.1  Settings Backup Choose Management > Settings > Backup to display the following page.  Figure 126 Backup settings  In this page, click the Backup Settings button to save your router’s settings to your local PC. Update Choose Management > Settings > Update, and the following page appears.
 99 Figure 127 Update settings  In this page,  click  the  Browse… button to  select the correct  new settings  file,  and then click the Update Settings button to update the router’s settings. Restore Default Choose Management > Settings > Restore Default to display the following page.  Figure 128 Restoring the default settings  In this page, click the Restore default settings  button, and then system returns to the default settings. 5.5.2  System Log Choose Management > System Log to display the following page.    Figure 129 System log  In this page, you are allowed to view the system log and configure the system log.  View System Log Click the View System Log button to display the following page.
 100  Figure 130 Viewing the system log  In this page, you can view the system log.   Click the Refresh button to refresh the system log. Click the Close button to exit.  Configuring the System Log Click the Configure System Log button to display the following page.  Figure 131 Configuring the system log  In this page, you can set 3 types of system log modes, including Local, Remote, and Both.  Local: When selecting Local, the events are recorded in the local memory.  Remote: When selecting Remote, the events are sent to the specified IP address and UDP port of the remote system log server.  Both: When selecting Both, the events are recorded in the local memory or sent to the specified IP address and UDP port of the remote system log server. After finishing setting, click the Apply/Save button to save and apply the settings.
 101  Note: If you want to log all the events, you need to select the Debugging log level. 5.5.3  TR-69 Client Choose Management > TR-069Client to display the following page.    Figure 132 TR-069 client configuration  WAN  Management Protocol (TR-069)  allows  a  Auto-Configuration  Server (ACS)  to perform auto-configuration, provision, collection, and diagnostics to this device. In  this  page,  you  may  configure  the  parameters  such  as  the  ACS  URL,  ACS password, and connection request user name. After finishing setting, click the Apply/Save button to save and apply the settings. 5.5.4  Internet Time Choose Management > Internet Time to display the following page.
 102  Figure 133 Time settings  In this page,  you  may configure the  router to synchronize  its  time with  the  Internet time servers. After enabling Automatically synchronize with Internet time servers, the following page appears.
 103 Figure 134 Setting the time server In  this page,  set the proper  time servers,  and  then click the  Apply/Save  button  to save and apply the settings. 5.5.5  Access Control Passwords Choose  Management >  Access  Control  >  Passwords, and  the  following  page appears.      Figure 135 Modifying the password  In the page, you can modify the passwords of different users. After finishing setting, click the Apply/Save button to save and apply the settings. Services Choose Management > Access Control > Services Control and the following page appears.
 104  Figure 136 Services control  In this page, you can enable or disable the different types of services. After finishing setting, click the Apply/Save button to save and apply the settings.  Note: The WAN information is not displayed in the bridge mode. 5.5.6  Update Software Choose Management > Update Software, and the following page appears.
 105  Figure 137 Updating software  If  you  want  to  upload  the  software,  click  the  Browse…  button  to  choose  the  new software, and then click the Update Software button.  Note: When  software  update  is  in  progress,  do  not  shut  down  the  router.  After  software update completes, the router automatically reboots. Please make sure that the new software for updating is correct, and do not use other software to update the router. 5.5.7  Reboot Choose Management > Reboot and the following page appears.    Figure 138 Rebooting the router In this page, click the Reboot button, and then the router reboots.
 106 6  Q&A (1) Q: Why all the indicators are off? A: Check the following:   The connection between the power adaptor and the power socket.   The status of the power switch. (2)   Q: Why the LAN indicator is off? A: Check the following:   The connection between the ADSL router and your computer, hub, or switch.   The running status of your PC, hub, or switch. (3)   Q: Why the DSL indicator is off? A: Check the connection between the “Line” port of router and the wall jack. (4)   Q: Why Internet access fails while the DSL indicator is on? A:  Check  whether  the  VPI,  VCI,  user  name,  and  password  are  correctly entered. (5)   Q: Why I fail to access the web configuration page of the DSL router? A: Choose Start > Run from the desktop, and ping 192.168.1.1 (IP address of the DSL router). If the DSL router is not reachable, check the type of the network cable,  the connection between the DSL router  and the PC,  and the TCP/IP configuration of the PC. (6)   Q: How to load the default settings after incorrect configuration? A: To restore  the factory default  settings,  turn  on  the  device,  and  press the reset  button  for  about  1  second,  and  then  release  it.  The  default  IP address  and  the  subnet  mask  of  the  DSL  router  are  192.168.1.1  and 255.255.255.0, respectively.     User/password of super user: admin/gvt12345   User/password of common user: user/user
 107 FCC Information   This equipment complies with CFR 47, Part 15.19 of the FCC rules. Operation of the equipment is subject to the following conditions: (1) this device may not cause harmful  interference,  and  (2)  this  device  must  accept  any  interference  received; including interference that may cause undesired operation. This device must not be co-located or operating in conjunction with any other antenna or transmitter NOTE:  THE  MANUFACTURER  IS  NOT  RESPONSIBLE  FOR  ANY  RADIO OR  TV  INTERFERENCE  CAUSED  BY  UNAUTHORIZED  MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. Federal Communications Commission (FCC) Requirements, Part 15   This equipment has been tested  and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide  reasonable  protection  against  harmful  interference  in  a  residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed  and  used  in  accordance  with  the  instructions,  may  cause  harmful interference  to  radio  communications.  However,  there  is  no  guarantee  that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning  the  equipment  off  and  on,  the  user  is  encouraged  to  try  to  correct  the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help.
 108 Regulatory information / Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by  the manufacturer may  void the user’s authority  to operate the  equipment.  The  manufacturer  is  not  responsible  for  any  radio  or  television interference caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility  of the user to correct any interference caused by such unauthorized modification, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government CAUTION: To maintain compliance with FCC’s RF exposure guidelines, this equipment  should  be  installed  and  operated  with  minimum  distance  20cm between  the  radiator  and  your  body.  Use  on  the  supplied  antenna. Unauthorized  antenna,  modification,  or  attachments  could  damage  the transmitter and may violate FCC regulations. MPE Statement (Safety Information) Your device contains a low power transmitter. When device is transmitted it sends out Radio Frequency (RF) signal.

Navigation menu