Edgecore Networks ECW7210L IEEE 802.11a/b/g/n/ac Enterprise Cloud Based Indoor Access Point User Manual Quick Start Guide

Edgecore Networks Corporation IEEE 802.11a/b/g/n/ac Enterprise Cloud Based Indoor Access Point Quick Start Guide

Contents

User Manual-1

– 1 –Quick Start GuideIEEE 802.11a/b/g/n/ac Enterprise Cloud Based Indoor Access PointECW7210-LNote: For detailed access point (AP) installation information, refer to the Installation Guide, which is on the Documentation CD included with the AP.Note: For Safety and Regulatory information, refer to the Safety and Regulatory Information document included with the AP.Installation InformationThe AP includes its own built-in features for mounting the unit to a wall or suspended ceiling T-rail. Caution: The planning and installation of the AP requires professional personnel that are trained in the installation of radio transmitting equipment. The user is responsible for compliance with local regulations concerning items such as antenna power, use of lightning arrestors, grounding, and radio mast or tower construction. Therefore, it is recommended to consult a professional contractor knowledgeable in local radio regulations prior to equipment installation.Follow these steps to install the AP:1. Unpack the AP Unpack the AP and check the package contents.◆ECW7210-L Enterprise Access Point◆AC Power adapter◆Console cable (RJ-45 to DB-9)◆Quick Start Guide (this guide)◆Regulatory and Safety Information◆Screw Kit150200000848AE032014-AP-R01www.edge-core.com
Quick Start Guide– 2 –2. Mount the AP After planning your installation, mount the unit on a wall or suspended ceiling T-rail. .Mounting on a WallSet two screws in the wall 137.2 mm (5.2 in.) apart.Slide the AP’s wall mounting slots down onto the screws so that the unit is secure.121212.Mounting on a Ceiling T-railPosition the AP’s ceiling-mount clip holders on either side of the T-rail.Turn the AP until the two clips lock the AP to the T-rail.12
Quick Start Guide– 3 –3. Connect Cables Connect network cable to the RJ-45 port for your network connection. The RJ-45 port connection can also provide PoE power to the unit.4. Connect Power If you do not power the unit using PoE, connect the AC power adapter to the AP and to an AC power source.Connect Category 5e or better cable to the RJ-45 port.11Connect the power adapter to the power socket. Connect the power adapter to a nearby AC power source.1212
Quick Start Guide– 4 –5. Verify AP Operation Verify basic AP operation by checking the system LEDs. The Power LED should be on green and the LAN LED on or flashing green. 6. Connect to theConsole PortTo make initial configuration changes to the AP, connect a PC to the AP’s console port using the included console cable. WiFiPowerLAN21312312
Quick Start Guide– 5 –From a PC running VT-100 terminal emulator software, use the following settings:◆Baud rate — 115,200 bps◆Character Size — 8 Characters◆Parity — None◆Stop bit — One◆Data bits — 8◆Flow control — noneLog in to the command-line interface (CLI) using default settings:◆Login Name — admin◆Password — null (there is no default password)7. Connect to the WebUser InterfaceThe AP offers a user-friendly web-based management interface for the configuration of all the unit’s features. You can make initial configuration changes by connecting a PC directly to the AP’s LAN port. The AP has a default management IP address of 192.168.1.10 and a subnet mask of 255.255.255.0. You must set your PC IP address to be on the same subnet as the AP (that is, the PC and AP addresses must both start 192.168.1.x).Log in to the web interface using the default settings:◆Login Name — admin◆Password — tallacnetworksConsole PortConsole Cable12
Quick Start Guide– 6 –8. Security Slot The access point includes a Kensington security slot on the rear panel. You can prevent unauthorized removal of the access point by wrapping the Kensington security cable (not provided) around an unmovable object, inserting the lock into the slot, and turning the key.
Quick Start Guide– 7 –Hardware SpecificationsItem SpecificationChassis SpecificationsSize W x D x H: 180 x 160 x 53 mm (7.08 x 6.29 x 2.08 inches)Weight 638 g (1.40 lb)Temperature Operating: 0 °C to 40 °C (32 °F to 104 °F)Storage: -20 °C to 70 °C (-4 °F to 158 °F)Humidity Operating: 5% to 95% (non-condensing)Network InterfacesPorts Two RJ45 1000Base-T: One with PoE (PD)2.4 GHz Radio IEEE 802.11b/g/n5 GHz Radio IEEE 802.11a/n/acRadio Frequencies2.4 GHz 2400 ~ 2483.5 MHz5 GHz B1: 5150 ~ 5250 MHzB4: 5725 ~ 5850 MHz Power Supply SpecificationsPoE Input Power 48 VDC, 0.6 AAC Power Adapter AC Input: 100 ~ 240 VAC, 50 ~ 60 HzDC Output: 12 VDC, 2.5 APower Consumption 20 W maximumRegulatory CompliancesRadio FCC Part 15C 15.247/15.207 (2.4-2.4835GHz, 5.725-5.850GHz)FCC Part 15E 15.407 (5.150GHz-5.250GHz)Emissions FCC Class B Part 15Safety UL 60950-1

Navigation menu