Eastman Kodak M240 Kodak Baby Video Monitor/M240 User Manual urg 01370

Eastman Kodak Company Kodak Baby Video Monitor/M240 urg 01370

Users Manual

KODAK Baby Video Monitor / M240User guidewww.kodak.comFor help:www.kodak.com/go/M240supportMonitor every moment. Record every memory. The recordable KODAK Baby Video Monitor–from the moment you press Record, you get up to 20 seconds of previous action. You’ll always capture memories from the moment they start.Attach gift card here
Eastman Kodak CompanyRochester, New York 14650© Kodak, 2011All screen images are simulated.Kodak is a trademark of Eastman Kodak Company.4H8787_en
Product featureswww.kodak.com/go/support iWhat’s in the box:SpeakerOK/Menu LCD Review RecordNavigationC10 CameraM240 MonitorRechargeable battery pack(2) AC adapters: A longer, 11.8 ft (3.6 m) cord for the camera, and a shorter, 6 ft (1.8 m) cord for the monitor USB cableWall mounting accessories*Stand / Belt Clip–Use the stand to position the monitor on a flat surface. For portability, fasten the monitor to your belt with the clip.Volume (+ / -)Antenna On/Off Monitor (side view)Stand / Belt Clip*SD/SDHC card slotUSB PortIR LEDsLens MicrophoneOn/Off Also included:Antenna You can also purchase a charging dock for your monitor at the KODAK Store. Go to (www.kodak.com/go/accessories).
1www.kodak.com/go/M240support1Product warningCAUTION:Strangulation Hazard–do not place the camera in the crib or within 3 ft (1 m) of the baby.■You must regularly monitor your baby’s activity. This product cannot replace responsible, adult supervision. This product will not alert parents to a baby’s silent activities.■Never use extension cords with AC adapters. Use the AC adapters provided. ■When an AC adapter is plugged into an electrical outlet, do not touch the exposed end. ■Test the monitor before first use, periodically, and when changing the location of the camera.■Do not use the monitor near water (bathtub, sink, etc). Keep the monitor away from heat sources (stoves, radiators, etc).■This monitor may pick up signals from similar devices. Signals broadcast by this device may be picked up by other receivers. ■Small parts can be a choking hazard. Do not allow children to play with the camera or monitor.■Use only the original, rechargeable battery pack provided.■Install batteries correctly.■Remove alkaline batteries from the camera if the camera is stored for long periods of time or when batteries are exhausted; do not mix old and new batteries; do not mix alkaline, standard, or rechargeable batteries.■Keep all batteries away from children. Dispose of exhausted batteries properly.■Do not attempt to recharge non-rechargeable camera batteries.
Quick Start Upwww.kodak.com/go/support 22Quick Start UpCameraOperate the camera with the AC adapter or with 4 AA-size alkaline batteries (not provided).1If you choose to use AA-size alkaline batteries:aRemove the screw on the back of the camera with a straight-blade screwdriver, then remove the battery door.bInsert 4 batteries.cPlace the battery door back on the camera, then secure with the screw.2Select a location for the camera that will best capture the baby. CAUTION:Strangulation Hazard–do not place the camera in the crib or within 3 ft (1 m) of the baby.3Place the camera on a flat surface, such as a dresser or shelf. To mount the camera on a wall, see page 4.4Connect the AC adapter with the longer cord to the back of the camera.5Plug the AC adapter into a standard electrical outlet, then secure the cord to the wall using the mounting clips, if necessary.6Press the On/Off button for at least 2 seconds. The button glows when the camera is turned on.
3www.kodak.com/go/supportQuick Start UpMonitorYour monitor and camera were linked during manufacture. The monitor operates only when the rechargeable battery pack is installed. After installing the battery pack, you can operate the monitor using the battery pack or with the AC adapter.NOTE: To maximize battery life, charge the battery pack for 3 hours before first use. You can operate the monitor using the AC adapter during charging.1Select a convenient location for the monitor and dock that also provides optimal viewing (a table near your chair or sofa, for instance).2Slide the battery compartment cover to remove it.3Insert the battery pack connector into the socket, then insert the battery pack.4Close the battery compartment cover.5Connect the AC adapter with the shorter cord to the back of the monitor.
Quick Start Upwww.kodak.com/go/support 46Plug the AC adapter into a standard electrical outlet.7Press the On/Off button on the monitor for more than 2 seconds. A light on the top of the monitor glows when the monitor is turned on.8Turn on the camera.9Verify that an image appears on the monitor.Mount the Camera on a WallNOTE: Test monitor reception before mounting the camera on a wall. View the image on the monitor while someone else adjusts the camera position. Optimal camera-to-subject distance for night viewing is 3 – 6 ft (0.9 – 1.8 m).CAUTION:Strangulation Hazard–do not place the camera in the crib or within 3 ft (1 m) of the baby.1Select a wall location for the camera, then drill 2 holes in that location using a 13/64 in. (5.2 mm) drill bit. Use the template provided (see page 18).2Insert a wall anchor into each hole, then gently tap the anchors with a hammer until they are seated (flush-mounted) in the wall.3Insert the screws into the anchors, then tighten the screws until approximately 7/32 in. (5.6 mm) of each screw is exposed.4Slide the base of the camera over the screws until the camera locks into place.5Connect the AC adapter to the camera (or insert 4 AA-size alkaline batteries).6Secure the AC adapter cord to the wall with the mounting clips.
5www.kodak.com/go/supportQuick Start UpUsing the CameraOn / Off Button—Press for more than 2 seconds to turn camera On/Off.Using the MonitorOn / Off Button— Short Press–Press to turn the display On/Off.Long Press–Press for more than 2 seconds to turn the monitor On/Off.NOTE: When the monitor is turned on, sounds transmitted by the camera are heard even when the display is turned off.OK / Menu Button—Press to access features.Volume Control—Press the + / - buttons to adjust the sound level.Record Button—Press to Start / Stop video recording.Review Button—Press to play a video.Navigation Buttons —Press to select menu options.Power / Low Battery / Link Indicator - White LED— Constant–Normal operationFlashing slowly–Battery level is lowFlashing fast (twice per second)–Monitor cannot establish link with the cameraNOTE: See Linking additional cameras to your monitor, page 8.
Quick Start Upwww.kodak.com/go/support 6LCD IndicatorsSignal— Displays signal strength and link status.Sound Level indicator—Up to 4 orange LEDs indicate the sound level that the monitor is receiving. Good signal from the camera. Camera and monitor are linked.Diminished signal. Adjust distance between camera and monitor.No signal. Link from the camera is lost (see Troubleshooting).Camera-to-Monitor linking iconsSignal strength and battery status as they appear on the LCD
7www.kodak.com/go/supportQuick Start UpBattery Status indicators—SD Card Status—Fully Charged–Battery is fully charged.Battery Charging–Battery symbol changes in sequence.Battery Low–Flashing symbol mean the battery needs charging.NOTE: When the battery is low for more than 10 minutes, the monitor turns off. AC Power–Device is powered by the AC adapter.SD Card is installed in the monitor.No card is installed.SD Card is full. Replace the card or delete files on the card to create space.SD Card is locked. Remove the card, then slide up the small switch on the side of the card (toward the top of the card).
Quick Start Upwww.kodak.com/go/support 8Linking additional cameras to your monitorCamera SelectYou can view video from the selected camera or from all cameras in sequence. The default monitor setting displays video from each linked camera for up to 10 seconds in sequence. To change to a different camera manually, press to select a camera, then press OK.Your camera and monitor were linked during manufacture. To purchase additional cameras and approved accessories such as a charging dock for your monitor, go to the KODAK Store (www.kodak.com/go/accessories).Linking buttonTo link additional cameras:Use a paper clip to press and hold the linking button on the back of the additional camera for more than 2 seconds (a white LED on the camera blinks twice per second for 10 seconds).Press and hold the OK button on the monitor for more than 3 seconds (a linking icon appears on the LCD). After camera No. 2 is successfully linked, the display will show the image from the camera. The image on the monitor switches from camera No. 2 to camera No. 1 after 10 seconds.NOTE: Repeat the procedure to link up to 4 cameras.12
9www.kodak.com/go/supportQuick Start UpSpecial FeaturesBuffered Recording—Insert a memory card into the monitor, then press Record. The monitor records the current scene and up to 20 seconds of previous action.IMPORTANT: You must insert a memory card into the monitor to record video.Night View—In a dark room, the monitor uses infrared LEDs to enable you to see your baby at night.Review/Play—Press the Review button on the monitor–the first frame of the most recently recorded video appears. In the bottom of the screen, a counter displays the number of saved videos. Press OK to Play. The recorded length, in minutes, appears on the top, right side of the screen. To locate another video, press .Fast forward—While in Play mode, press to fast forward through the video at 2X speed (press twice for 4X and 3 times for 8X). Press to decrease the playing speed or rewind to the beginning of the video. Pause—While in Play mode, press the OK button to pause the video. Press OK again to restart the video.Live View Mode—Press Review to return to live view mode.Delete a Video—While in Play or Review mode, press to select the delete icon. To permanently delete the video, press the down arrow again, then press OK.
Quick Start Upwww.kodak.com/go/support 10Copying recorded videos to your computer1Turn on the monitor.2Connect the USB cable to the monitor and your computer.“Found Hardware” appears in your computer tray, and a new drive appears under My Computer. 3Open the new drive, then copy any saved videos from the SD Card in your monitor to a new location on your computer. You may need to turn on the monitor after disconnecting from your computer.NOTE: You can also turn off the monitor, remove the SD Card, then insert the card into a card reader that is connected to your computer.Using the Menu to access more features1Press the OK button.2At the menu, press to select a feature. Your selection appears in red.3Press the OK button to enter the sub-menu for your selection. NOTE: Press to return to the main menu at any time. Power SavingAboutSD CardVoice ActivationBrightnessReturn Camera Delete(VOX)
11 www.kodak.com/go/supportQuick Start UpSub-menusBrightness—Press to adjust the brightness of your monitor image, then press OK.Camera Delete—While in Camera Delete, press OK. Press to select a camera to delete, then press OK. NOTE: If you only have one camera, you cannot delete it. Power Saving—You can turn off the LCD to save power. Press to select 30 Seconds, 5 minutes, 30 minutes, or OFF. Press OK to return to the main menu. Voice Activation (VOX)—The monitor screen turns on when a preset sound level is detected from the camera for more than 10 seconds. If the detected sound drops below the preset sound level, the monitor turns off after 15 seconds. Press to activate. The last setting is saved. Press OK to return to the Main menu. SD Card—If an SD card is installed in the monitor, an icon appears in the main menu. Press to select the icon, then press OK. To format the SD Card, select again, then select OK. After formatting is complete, the main menu appears.CAUTION:Formatting deletes all information stored on the SD card.
Quick Start Upwww.kodak.com/go/support 12Set the Date and TimeIMPORTANT: You must install an SD Card in the monitor to set the date and time. Date and time must be set so that recorded videos are sorted by date and time.1At the Main menu, select the SD Card icon, then press OK. 2Press to select Date/time, then press OK.3Select a Date format.4Press to change numbers from 0 to 9. Press the to move between date format and time setting. Press to increase or to decrease numbers.5Press OK to return to the Date/time and SD Card Format menu.6Press select the Return arrow, then press OK to return to the Main menu.
13 www.kodak.com/go/supportQuick Start UpTips and Troubleshooting■To improve reception, adjust the distance between the camera and the monitor, or move the monitor away from other devices (cordless phones, Wi-Fi devices, etc). You can also extend the antenna on the monitor.■To conserve battery power, use the AC adapter. ■If you installed alkaline batteries in the camera, remove them during long periods of non-use.No picture or sound–Verify that the:■Monitor is turned on■AC adapters are plugged into a working, standard electrical outlet■Camera is properly linkedSound but no picture–Verify that the:■Power-Saving mode is deactivated (see page 11). Press the On/Off button quickly to activate/deactivate the display.■Monitor brightness is adjusted properly (see page 11).■Device locations are acceptable. Move the camera and monitor to different locations.Picture but no sound–Increase the monitor volume. Picture not clear–■For Night Vision, position the camera within 6 ft (1.8 m) of the baby.■Test reception by moving the monitor and/or camera to a different location.■Move the monitor away from other devices (cordless phones, Wi-Fi devices, etc).■Adjust the monitor brightness (see page 11).■Position the monitor closer to the camera, if necessary.Squealing sound–Move the camera and the monitor farther away from each other.
Appendixwww.kodak.com/go/support 143AppendixKODAK Baby Video Monitor / M240 SpecificationsMonitor 2.4 in (6.1 cm) diagonal LCD, 480 x 234 pixels, 4:3 aspect ratioPower supply M240 System AC Adapter Model No. EFS00500590055OUL, Manufacturer: Eastern Frontier. EIAJ Class 2 DC plug. Input: 100-240V AC 50/60 Hz. 0.2Amp Output: 5.9 V DC, 0.55 Amp, 1.8 m cableSize2.5 x 6.3 x 1.0 in (6.5 x 16 x 2.5 cm)Weight 1.1 lb (511 g) C10 Camera AC Adapter Model No. EFS00500590055OUL, Manufacturer: Eastern Frontier. EIAJ Class 2 DC plug. Input: 100-240V AC 50/60 Hz. 0.2Amp Output: 5.9 V DC, 0.55 Amp, 3.6m cableSize2.8 x 3.2 x 6.0 in (7.1 x 8.1 x 15.2 cm)Weight 0.46 lb (210 g)Communication with USB devicesUSB Full Speed Type AWireless network compatibility2.4 GHz RFOther featuresVideo formats AVI video fileMemory cards (see page 7)SD, SDHC up to 32 GB.
15 www.kodak.com/go/supportAppendixImportant safety instructionsLimited warrantyKodak warrants KODAK Consumer Electronic Products and Accessories (“Products”), to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair.Limited warranty coverageWarranty service is only available from within the country where the Products were originally purchased. You may be required to ship Products, at your expense, to the authorized service facility for the country where the Products were purchased. Kodak will repair or replace Products if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak along with proof of the purchase price paid. Repair, replacement, or refund of the purchase price are the sole remedies under the warranty. If replacement parts are used in making repairs, those parts may be remanufactured, or may contain remanufactured materials. If it is necessary to replace the entire Product, it may be replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of repair or replacement, whichever is longer.LimitationsThis warranty does not cover circumstances beyond Kodak's control. This warranty does not apply when failure is due to shipping damage, accident, alteration, modification, unauthorized service, misuse, abuse, use with incompatible accessories or attachments, failure to follow Kodak's operation, maintenance or repacking instructions, failure to use items supplied by Kodak (such as adapters and cables), or claims made after the duration of this warranty. Kodak makes no other express or implied warranty for this product, and disclaims the implied warranties of merchantability and fitness for a particular purpose. In the event that the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be one year from the purchase date or such longer period as required by law. The option of repair, replacement, or refund is Kodak's only obligation. Kodak will not be responsible for any special, consequential or incidental damages resulting from the sale, purchase, or use of this product regardless of the cause. Liability for any special, consequential or incidental damages (including but not limited to loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or services, or claims of your customers for such damages resulting from the purchase use or failure of the Product), regardless of cause or for breach of any written or implied warranty is expressly disclaimed.Temperature Operating: 32 to 104°F (0 to 40°C)Storage: -25 to 160°F (-32 to 71°C)
Appendixwww.kodak.com/go/support 16Your rightsSome states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction.Outside the United States and CanadaIn countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.Regulatory compliance and advisoryFCC compliance and advisoryThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee. that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions.Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation.FCC and Industry CanadaThis device complies with Industry Canada RSS-210 and FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
17 www.kodak.com/go/supportAppendixCanadian DOC statementDOC Class B Compliance—This Class B digital apparatus complies with Canadian ICES-003.Observation des normes-Classe B—Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.NoticeWhen the monitor is operating, it is possible to view images and other content directly from other sources. Eastman Kodak Company, its subsidiaries and affiliates do not control and are not responsible for any content displayed or viewed.
Appendixwww.kodak.com/go/support 18Wall mounting TemplateSelect a wall location for the camera, then drill 2 holes in that location using a 13/64 in. (5.2 mm) drill bit. Use this template to determine hole placement.1.2 in. (30 mm)Top

Navigation menu