ELITEGROUP COMPUTER SYSTEMS GWS-CSCG Logistic Monitoring Gateway User Manual GWS CSCG 170531 pmd

ELITEGROUP COMPUTER SYSTEMS CO., LTD Logistic Monitoring Gateway GWS CSCG 170531 pmd

Contents

Users Manual-2

1Federal Communications Commission (FCC)This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses, and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:• Reorient or relocate the receiving antenna• Increase the separation between the equipment and the receiver• Connect the equipment onto an outlet on a circuit different from that towhich the receiver is connected• Consult the dealer or an experienced radio technician for helpShielded interconnect cables and a shielded AC power cable must be employed withthis equipment to ensure compliance with the pertinent RF emission limitsgoverning this device. Changes or modifications not expressly approved by thesystem’s manufacturer could void the user’s authority to operate the equipment.FCC Label Compliance StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the follow-ing two conditions:(1) This device may not cause harmful interference(2) This device must accept any interference received, including interference thatmay cause undersired opreationRF Exposure Information (SAR)This device meets the government’s requirements for exposure to radio waves.This device is designed and manufactured not to exceed the emission limits forexposure to radio frequency (RF) energy set by the Federal CommunicationsCommission of the U.S. Government.The exposure standard employs a unit of measurement known as the SpecificAbsorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR areconducted using standard operating positions accepted by the FCC with the EUTtransmitting at the specified power level in different channels.The FCC has granted an Equipment Authorization for this device with all reportedSAR levels evaluated as in compliance with the FCC RF exposure guidelines. SARinformation on this device is on file with the FCC and can be found under the DisplayGrant section of www.fcc.gov/eot/ea/fccid after searching on FCC ID: WL6GWS-CSCG
2Canada, Industry Canada (IC) NoticesThis device complies with Industry Canada’s licence-exempt RSSs. Operation issubject to the following two conditions:(1) This device may not cause interference; and(2) This device must accept any interference, including interference that may causeundesired operation of the device.Canada, avis d’Industry Canada (IC)Le présent appareil est conforme aux CNR d’Industrie Canada applicables auxappareils radio exempts de licence. L’exploitation est autorisée aux deuxconditions suivantes :(1) l’appareil ne doit pas produire de brouillage, et(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,même si le brouillage est susceptible d’en compromettre le fonctionnement.Radio Frequency (RF) Exposure InformationThe radiated output power of the Wireless Device is below the Industry Canada (IC)radio frequency exposure limits. The Wireless Device should be used in such amanner such that the potential for human contact during normal operation isminimized.This device has been evaluated for and shown compliant with the IC SpecificAbsorption Rate (“SAR”)limits when operated in portable exposure conditions.La puissance de sortie émise par l’appareil de sans fil est inférieure à la limited’exposition aux fréquences radio d’Industry Canada (IC). Utilisez l’appareil desans fil de façon à minimiser les contacts humains lors du fonctionnement normal.Informations concernant l’exposition aux fréquencesradio (RF)Ce dispositif a été évalué pour et démontré conforme à la Taux IC d’absorptionspécifique (“SAR”) des limites lorsqu’il est utilisé dans des conditions d’expositionportatifs.o compliance to ALL applicable EU standards to support CE mark.o compliance to FCC 47 CFR Part 15 Subpart B & ICES-003 Issue 6-2016o compliance to EU Radio Equipment Directiveo compliance to FCC 47 CFR Part 15 Subpart C
3• If you encounter the following technical problems with the product,unplug the power cord and contact a qualified service technician or yourretailer.Attention during use• The power cord or plug is damaged.• Liquid has been spilled into the system.• The system does not function properly even if you follow the operat-ing instructions.• The system was dropped or the cabinet is damaged.• The system performance changesIMPORTANT:This product is intended to be supplied by an UL certified DC source rated 5Vdc;3A. Tma 60 degree C minimum and output meets SELV, Non-hazardous energylevel, if need further assistance, please contact ECS (or Intel®) for furtherinformation.The warranty does not apply to products that have been disassembled by users.Safety Notice and warningsIMPORTANT:In the European Union, this symbol indicates that this product includingbattery must not be disposed of with household waste. It is your responsibilityto hand it over to a designated collection point for the recycling of wasteelectrical and electronic equipment. For more information, please contact yourlocal waste collection center or the point of purchase of this product.CAUTION:Risk of explosion if battery is replaced by an incorrect type.Dispose of used batteries according to the instructions.Product disposal notice• Read and follow all instructions in the documentation before you operateyour system.• Do not use this product near water or a heated source such as a radiator.• Set up the system on a stable surface.• Openings on the chassis are for ventilation. Do not block or cover theseopenings. Make sure you leave plenty of space around the system forventilation. Never insert objects of any kind into the ventilation openings.• If you use an extension cord, make sure that the total ampere rating of thedevices plugged into the extension cord does not exceed its ampererating.Safety InstructionYour system is designed and tested to meet the latest standards of safety forinformation technology equipment. However, to ensure your safety, it is importantthat you read the following safety instructions.Setting up your system
4Nordic Lithium Safety Notice (for lithium-ion batteries)Safety Notice:Danger of explosoin if battery is incorrectly replace only with the same orequivalent type recommended by the manufacturer. Dispose of used batteriesaccording to the manufacturer’s instructions.Attetion during use1. Do not place this product underneath heavy loads or in an unstable position.2. Do not use or expose this product around magnetic fields as magneticinterference may affect the performance of the product.3. Do not storage this product to high levels of direct sunlight, high-humidity orwet conditions.4. Do not carry the product on the body (or pockets).CE markingFCC marking
5Brief IntroductionSpecificationsItem Spec DescriptionIntel® Atom X3 Telit HE922Cache:16Kbytes L1Memory: eMMC interface 8GB RAM: 8Gb LDDR3Charging Port (Extension Battery/ CST)Charging Port (Micro USB output5V3A / input 110V~240V)Micro USB DebugBuzzer BuzzerLED LED(CPU /Devi ce Status)Display OLED 54.6*32mm / 128*64 pixdPower / NFCResetExpansion SIM Slot3GWiFiGPS / GNSSZigbeeNFCAmbi entTemp/HumidityG-SensorAir PressureProximityBattery 4400mAH Li-Polymer(Typical) SDL 695688T-1S1PBattery Life 10 daysOpera ti ng Temperature -20℃ ~ 60℃Dimension (h/w/l) 20* 82 *145 mmIP Level IPX0 for safety standardPower Consumption Hi: 4.4V / Normal: 4.2V / Low: 3.75VConnectivitySensorProcessor External IO PortKey/Button
6Castle canyon provisioning overview
7How to use GWS-CSCGStep 1: Power On/Off1. Power On - Press button three times. On third press user must hold button down for20 seconds.If successful: Power icon on reflecting battery charge status on display, green LEDpattern and positive audio chime.If unsuccessful: Power icon reflecting insufficient battery on display, red LED lightpattern and negative audio chime.2. Power Off - Press button three times. On third press user must hold button down for20 seconds.If successful: Power icon on reflecting battery charge status on UI, green LED patternand positive audio chime.If unsuccessful: Power icon will be reflected on UI, red LED light pattern and negativeaudio chime.User will not be able to power down device if the shipment is still active.
8Step 2: NFC Tag PairingTap powered on Gateway to Tag and press the NFC button to pair the Tag to theGateway.
9Step 4: Review shipment infoConfirm that the shipment information on the mobile app matches what is listed onthe shipment document.Step 3: Find shipment IDIn the mobile app, find the unique shipment ID listed on the shipment document.
10Step 5: Pair GatewaySelect “Pair Gateway “ and scan the Gateway barcode.Step 6: Pair Tags with shipping unit(i.e. Box, Pallet, Crate, Container)Select “Pair Tag with Shipping Unit” Scan the Tag barcode, then scan the Shipping UnitLabel Barcode. Repeat the process for all Tags, then Click “Done” when done painingTags with Shipping Units. Then click “ Next”,
11Step 7: Attach Gateway to box, pallet or crate.Place the Gateway in the Gateway shipment sleeve and attach it to the box / pallet/ crate.Step 8: Review shipment data & complete shipment.Review shipment details for accuracy. Once complete, the Gateway and Tagpositions will be set (for recording Tilt) and can start collecting all sensor data.
12Step 9: Load shipmentWhen loading pallets with Tags and Gateways onto a truck, try to place one pallet inthe back of the truck, one pallet in the center of the truck and one pallet with theGateway right by the door. Make sure that the Gateway faces the truck door, and is asclose to the door as possible to ensure the Gateway signal can best maintain cellconnectivity.Device OperationPlease refer to software user gudie for device operation.

Navigation menu