E Zone Guardian EZ12031 SPREAD SPECTRUM TRANSMITTER User Manual

E-Zone Guardian SPREAD SPECTRUM TRANSMITTER

User Manual

E-ZONE GUARDIANFCC CERTIFICATION COMPLIANCE USING DIGI INT'L. ANTENNATHE E-ZONE RF MODULE IS INTENDED TO PROVIDE WIRELESS DATA TRANS-AVAILABLE CPU I/O LINES, STORES THE DATA AND PERIODICALLY TRANSMITSWILL LINK ONLY WITH OTHER UNITS CONTAINING THE SAME INTERNAL IDBETWEEN TWO MODULES WHICH CANNOT COMMUNICATE DIRECTLY WITHPCB MOUNT: HIROSE PART NUMBER H.FL-R-SMT(10)PART NUMBER A24-HASM-450. SUBSTITUTION OF OTHER ANTENNAMISSION BETWEEN TWO LINKED UNITS. THE RF UNIT ACCEPTS DATA OVERIT TO THE OTHER UNIT. DATA MAY MOVE IN ONE OR BOTH DIRECTIONS. UNITSCODES. UNITS MAY ALSO FUNCTION AS INTERMEDIATE RELAY BY LINKING OF SECTION 15.231(e) OF THE FCC RULES. THE TIMING REQUIREMENTSUSER WARNINGS AND FCC REQUIREMENTS FOR THEIR EQUIPMENT INTHIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OEM ENGINEERS USING THIS E-ZONE RF MODULE ARE CAUTIONEDUSER DEFINED OUTPUTUSER DEFINED OUTPUTTHESE LINKING FUNCTIONS AS WELL AS THE RADIO CONTROL AND FEATURETWO READILY AVAILABLE TEXAS INSTRUMENTS PROVEN COMPONENTS.THE CC2591 RF FRONT END INCLUDES PA,LNA,SWITCHES,BALUN, RFOUTPUT POWER AND IMPROVE RECEIVER SENSITIVITY ON A 2.4GHz LOW-POWER RF SIGNAL PRODUCED BY THE CC2531, WHICH IS AN IEEE 802.15.4ARE PRESET AND FIXED AND NON-ADJUSTABLE BY THE END USER.FCC RULES WHEN TRANSMITTING. END USERS MUST INCORPORATE ALLSHOULD BE AWARE OF THE RF EXPOSURE LIMITS SPECIFIED INOPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, ANDINCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.SUPPLIED LABEL P/N 101-001003 OR "CONTAINS FCC ID O4UEZ12031"OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONSFUNCTIONS ARE PREPROGRAMMED INTO THE MODULE WHICH UTILIZEMATCHING NETWORK AND INDUCTOR, AND IS IMPLEMENTED TO INCREASECOMPLIANT RF SYSTEM-ON-CHIP PROGRAMMED TO PROVIDE BOTHTHIS DEVICE COMPLIES WITH THE OPERATIONAL AND TIMING REQUIREMENTSWARNING: END USERS ARE RESPONSIBLE TO ASSURE COMPLIANCE WITHOPERATIONAL MANUALS. INSTALLERS AND USERS OF THIS EQUIPMENTTHIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, ANDTHAT THEY MUST INCLUDE IN THEIR OWN PRODUCT MANUAL THEOPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIOTO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THEE-ZONE GUARDIAN, PO BOX 774, CEDAR HILL,TX 75106-0774 8-1-12 REV. 1.01. ANTENNA PORT CONNECTORMAY INVALIDATE FCC CERTIFICATION.FREQUENCY HOPPING AND SPREAD SPECTRUM.FOLLOWING WARNING STATEMENT OF FCC PART 15.19: USER'S AUTHORITY TO OPERATE THE EQUIPMENT.EACH OTHER.SECTION 15.247(b)(4) OF THE FCC RULES.MUST BE ON THE OEM USER'S FINAL PRODUCT.RADIO MODULEEZR 101-10001. ANTENNA USER DEFINED INPUTUSER DEFINED INPUTP1.3 TO GROUNDP1.2 TO GROUNDOUT1OUT22. JTAGPGMPORTOUT 1OUT 2IN 1TO +3.3VTO +3.3VIN 2GROUNDUSBN+3.3VDCCPU P2.1RESET_NGROUND+3.3VDC+3.3VDCCPU P2.2USBP2. JTAGPGMPORT3. USBIN 2IN 13. USBPORTD2D1FRONTINSIDEBACK

Navigation menu