E RAE Electronics Industry Co EPT-4211 Plasma Display User Manual 90 X 4220 X2ANT DAYEFK 00

E-RAE Electronics Industry Co Ltd Plasma Display 90 X 4220 X2ANT DAYEFK 00

Contents

Users Manual Part 2

27Memorizing the ChannelsAdjusting Unclear ScreenEN27Basic UseUse to move to . Press to move to "Channel Settings" Press to select. Press to select.Press .Use to move to "Add" or "Erase".Press to go back to the previous menu. Adding and Erasing Channel (Manual Method)Use screen fine-tune controls to adjust the screen when picture quality is unclear or lines appear.Use to move to . Press to move to "TV Tuner Setting"Press to select.Press to move to "Fine Tune". Press .Use to tune.Press to go back to the previous menu.
28Changing Picture Settings28Basic UseUse to move to . Press .Use to move to the desired category.Use to adjust the setting.Press to go back to the previews menu. Custom Picture AdjustmentCustom ModeBrightness : It adjusts the brightness of the image.Contrast : It adjusts the contrast of the image.Sharpness : It adjusts the clarity of the image.Color : It adjusts the intensity of the color.Tint : It adjusts the natural tint of the image.Color Temp : Control the red, green and blue to find a best impression of color on screen.Phase(Component 1 , Component 2, PC) : Control this if it is out of focus.Frequency(PC) : The position of screen is not on the right spot.
29Changing Sound SettingsENUse to move to . Press .Use to move to the desired category.Use to adjust the setting.Press to exit menu. Custom Sound Adjustment29Basic UseCustom ModeTreble : The high - pitched sound can be controlled.Bass : The low - pitched sound can be controlled.Balance : Control the volume of right and left speaker. The volume level 50 is recommended for the mostcomfortable listening.SRS WOW Control : SRS Labs in USA has developed the new concept of 3D sound technology for the bettersound effect with the combination of WOW, Trubass and FOCUS. With only two speakers,it creates a stereophonic sound just like a multi - channel speakers.Stereo Audio Out : If you would like to listen to the sound of TV through other equipments, you may connectthem to Audio out terminal.< > is a trademark of SRS Labs, Inc.<WOW> technology is incorporated under license from SRS Labs, Inc.<WOW>, SRS and ( ) symbol are trademarks of SRS Labs, Inc.<WOW>, <WOW>, SRS and ( ) symbol are trademarks of SRS Labs, Inc.
30Selecting the Menu Language30Basic UseMenu screen can be viewed in the language preferred by the user.Use to move to . Press to move to "Language". Press .Use to select the desired language.Press to exit menu. Use to move to . Press to move to "OSD Setting" . Press to select. Press .Use select the "On" or "Off".Press to move to "OSD Timeout(sec)".use to select the desired OSD Timeout.Press to exit menu. Setting OSD Tone Menu Background
31Changing Screen SizeENWideZoom 14 : 3(Normal)Zoom 2Press button on the remote control (Image Size Control). OrBasic UseWide 4 : 3 (Normal) Zoom 1 Zoom 2Screen SizeWide - It makes 16 : 9 format for input signal.4 : 3 - It is the standard format of broadcasting.Zoom 1 - It enlarges the natural screen factor by approx.(5%)Zoom 2 - It eularges the natural screen factor by approx(10%)Use to move to . Press to move to "Image Size". Press .Use to select the desired "Image Size".Press to exit menu.
32ApplicationUsing the V-ChipThe V-Chip feature automatically locks out programming that is deemed inappropriate for children. The user must first enter a password before any of the V-Chip restrictions can be set up or changed.Enter your 6-digit number.The default password for a new TV set isPress to select. After entering a valid password, The "V-Chip" Menu Screen will appear.First, Set up a personal identification number(password) and enable the V-Chip.Use to move to "V-Chip". Press to move to "Password".Press to select. Press .Setting up your V-CHIP password Use to move to "Change password"Press to select. Press to exit menu. Enter your 6-digit New passwordHow to Enable / Disable the V-ChipUse to move to "Status"Press to select the "On" or "Off". Press to exit menu.
33ENApplicationUsing the V-ChipFirst, Set up a personal identification number (password) and enable the V-Chip.Parental restrictions can be set up using either of two methods ;The TV guidelines or the MPAA rating.The V-Chip will automatically block certain categories that are "More restrictive".For example, if you check "L" Sub-rating in TV-PG, then the "L" Sub-rating in TV-14 and TV-MA willautomatically be checked.How to set up Restrictions using the "TV guidelines"Use to move to "TV Parental Guide".Press to select. Use or to move to desired categories.Press to set the restriction ratings. Press to exit menu. TV-Y : Young ChildrenTV-Y7 : Child 7 and overTV-G : General audienceTV-PG : Parental guidance suggestedTV-14 : Parents strongly cautionedTV-MA : Mature audienceThe restrictions for these two groups work independently.(young Children through age 7) (everybody else) FV : Fantasy ViolenceV : Violence S : Sexual situationL : Adult LanguageD : Sexual Suggestive Dialog
34How to set up Restrictions usiug the Canadian English.ApplicationUsing the V-ChipHow to Set up Restrictions using the MPAA RatingsUse to move to "Movie Rating" Use to move to desired categories.Press to set the restriction ratings. Press to exit menu. The MPAA rating system uses the Motion Picture Association of America(MPAA) system, and its mainapplication is for movies.When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable rating (either MPAA or TV-Rating).First, Set up a personal identification number(password) and enable the V-Chip.G : All Children and General audience.PG : Parental guidance suggestedPG13 : Parental guidance for children under 13R : Restricted viewing, parental guidance is suggested for children under17.NC17 : No children under age 17X : Adults onlyNR : Not ratedUse to move to "Canadian English". Use to move to desired categories.Press to set the restriction ratings. Press to exit menu.
35ENApplicationUsing the V-ChipIf the TV is turned to restricted channel, the V-Chip will block it.The Screen will go blank and the following message will appear:To resume normal viewing, press the key andpress your personal identification number (Password).E : ExemptC : ChildrenC8+ : Children eight years and olderG : General programming. Suitable for all audiencePG : Parental Guidance14+ : Viewers 14 years and older18+ : Adult ProgrammingHow to Reset the TV after the V-Chip Blocks a Channel.E : ExemptG : General8 ans+ : General-Deconsaille aux jeunes enfants13 ans+ : Cette emission peut ne pas convenir aux enFants de moins de 13 ans16 ans+ : Cette emission ne convicnt pas aux moins de 16 ans18 ans+ : Cette emission est reservee aux adultesUse to move to "Canadian French". Use to move to desired categories.Press to set the restriction ratings. Press to exit menu. How to set up Restrictions usiug the Canadian French.
3636ApplicationViewing the Closed CaptionsUse to move to . Press to move to "Closed Caption".Press .Use to set the closed captions.Press to exit menu. You can select these options in the following order.You can get the same result by pressing the button on the remote control.Listening to stereo sound MTS(Multi Television sound)Press Button on the remote control.(Multi Television sound)Depending on the particular program being broadcasted, you can listen to stereo, mono or a Secondary AudioProgramThe closed caption function will be off automatically when PIP function is on.(To use a closed caption function, turn PIP function off.)
37EN37Viewing Picture in PictureApplicationpress button on the remote control. Sound from only one of the screens may be heard.Use to move to . Press to move to "Layout".Press to select. Press .Use to select the .Press to exit menu. ororThe sub-screen can be changed to display picture from the desired input source.Press to move to input "PIP Source" Use to select the desired input source.Press to exit menu. Press button on the remote control.TV/External InputPIP Source Matrix Table.TV Composite 1 Composite 2 S-Video Component 1 Component 2 PC DVITV XOOOOOOXComposite 1 O X O O O O O XComposite 2 O O X O O O O XS-Video O O O X O O O XComponent 1 O O O O X O O XComponent 2 O O O O O X O XPC O O O O O O X XDVI O O O O O O O XMain Soure Pip Soure
38ApplicationViewing Picture in PictureSelecting Sub Screen SoundSelecting PositionSub-screen position can be selected only from the .Press to move to "PIP Position".Use to select the desired position.Press to exit menu.orPress button on the remote control.The sound of the sub screen can be selected when PIP is being displayed.Press to move to "Sound Select". Use to select the "Primary" or "Secondary".Press to exit menu. orPress button on the remote control.Press to move to "Window Layout". Use to select the desired size.Press to exit menu. orPress button on the remote control.Changing the Screen Size
39ENApplicationPanel SafetyUse to move to . Press to move to "Panel Safety". Press to select.Use to select the desired menu. Press to select.Press to exit menu. Press .Source RenameUse to move to . Press to move to "Source Rename". Press to select.Press to select the Input Source. Press to move one step.Press to select the desired Default/DVD/VCR/Satellite/AntennaPress to exit menu. Press .Scroll-On : The screen will move every 10 seconds. -Off : The screen will be in place opposite way of scroll On.Power Saving-Mode 1 : Normal mode.(Default)-Mode 2 : Supporting high power save mode.-Mode 3 : Supporting middle power save mode.-Mode 4 : Supporting low power save mode.Image Inversion- Enable signal for preventing image sticking.
40Auto Volume LevelResetting PDP TV SettingsApplicationIt resets all of the parameters to the factory default.The PDP TV will be turned off. The parameters will be set to factory default.Use to move to . Press to move to "Reset". Press to select. Press .Use to move to . Press to move to "AVL". Press Use to select the "On" or "Off".Press to exit menu.
41Setting TimeENApplicationUse to move to . Press to select "Timer Settings". Press to selectUse to adjust the desired hour. Press to move one step.Use to adjust the desired miuntes. Press to exit menu. Press
42Automatic Power On/OffApplicationSetting Time for Power On Setting Time for Power OffSetting HourUse to setSetting MinuteUse to select, to setSet/CancelUse to select, to select the"On" or "Off"Volume ControlUse to set volume press button on the remote control. It automatically turns off the TV after a designated period of timeDepending on the number of times the "SLEEP TIME" button is pressed, the TV will be turned off after 30, 60, 90, 120, 150or 180 minutes. To have the TV turn off after you fall asleepClock time must be set.
43Using TV as a MonitorAdjusting PC ScreenENMonitorUse to move to . Use to move to “H-Position or V-Position”. Use to adjust the setting.Press to exit menu. Press .PC must be turned on in order for you to use the TV as a monitor.Using TV as a MonitorUse to move to "PC". Press to select. Press button on the remote control.Custom ModeAutoH-Position : It moves the image on the screen horizontally.V-Position : It moves the image on the screen vertically.
44Trouble shooting Maintenance and ServiceDo not use other functions that are net mentioned in this user’s manual.In case a problem occurs with your PDP TV, please take the following steps first.If you still have the problem, turn the power off and contact your dealer or an authorized service center.Screen related MattersProblem ActionThe screen does not appear. Is the power plug pulled out? Insert the power plug. Turn the mainpower button on and press the power button of the remote controller.The screen appears too This problem occurs for a brief time in the process ofslowly after the power is turned on. image elimination processing in order to hide temporary screen noisethat occurs when the power is turned on. But if the screen does notcome after 1 minute contact your dealer or an authorized servicecenter.Screen is too bright or too dark. Perform brightness adjustment or Contrast adjustment. Screen is too large or too small. Adjust the screen size.Stripes appear on the screen Stop using wireless telephones, hair driers and electric drills.and it shakes.Simultaneous Screen Check that PDP TV and external equipment are connected.does not appear. Check the inputs of simultaneous screen by pressing sub-screenselection.The screen does not move. Press the STILL button. Check if the Pause button is pressed onexternal equipment.Computer Input Screen is abnormal. Perform manual fine adjustment.Automatic Turn On does not work. Automatic Turn On function works only when turning the PDP TV offwith the remote controller or Standby button.Problem ActionScreen appears, Voice is not heard 1. Press the "MUTE"button.2. Increase the sound level by pressing volume adjustment button.3. Check if sound terminal of external input is connected properly. 4. Check if audio cables are connected properly.5. If it is on PIP mode, convert audio of main screen and sub- screen by pressing"SOUND SEL"6. Select and check the other input.If the sound still does not work and the other channels are the same after you have done as the above, contact your dealer or an authorized service center.Lots of noise (static) occurs. When connecting a Set-Top-Box, check that it is on stereobroadcasting. If it is, the TV program may not be available or thereception may be bad. Check the audio source with another player. Ifthat source is good, contact your dealer or an authorized service center.Sound related issues
45Trouble shooting TipsENMaintenance and ServiceProblem ActionRemote controller does not work. 1. Check if main power is On.2. Check that the batteries of the remote controller wereloaded properly.3. Check to see if any obstacle exists between the PDPTV and the remote controller and remove it, if any.4. If the batteries have no power, replace them with two new batteries.PDP TV makes strange noise. It may be due to mechanical expansion or contractionchanges suh as humidity, temperature, etc, It is not a failure.PDP TV indication lamp is On. The red means the Stand-by power is ON. It will take afew seconds to turn off as the main power is off.Had forgotten Password of V-ChipCan not select PC mode when D-sub D-sub cable not meeting VESA standard. (D-sub No. 10cable is connected to the RGB output pin must be grounded) Component Cable can be used if of Set-top-box. there is an Component Terminal.This PDP TV is for household use and registered as harmless on electromagnetic waves. Therefore, you can use it in every location as well as residential areas.OthersAny input of unsupported resolution the "Out of Range" message appears.Considerations in InstallationScreen is optimal when the resolution is 1280 x 1024/60Hz.Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz)31.47 6037.86 7237.50 7531.47 7035.15 5637.88 6048.08 7246.88 7548.36 6056.48 7060.02 7563.94 60640 480720 4001280 1024800 6001024 768Supporting display modePress buttons on theRemote control in V-Chip function.
46Supported Display ModesMaintenance and ServiceAny input of unsupported resolution.The cabinet design and electronics specifications will be modified without prior notice forimproving the performance.SpecificationsComponent Mode [Y, CB(PB), CR(PR)]Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz)720 480 15.73 60.00 SDTV, DVD 480i720 480 31.47 59.94 SDTV, 480p1280 720 44.96 59.94 HDTV, 720p1280 720 45.00 60.00 HDTV, 720p1920 1080 33.72 59.94 HDTV, 1080i1920 1080 33.75 60.00 HDTV, 1080iAspect Ratio 16 : 9Screen Size (H V) 920.1 518.4mmResolution 1024 768 (XGA)Cell pitch (H V) 0.900(H) 676(V)mmDisplayable Colors 16.77M (256 256 256) / 10.7BillionBrightness 1200cd/ (w/o filter)Contrast 10000:1(MAX)Viewing Angle 160Input signal NTSC, SD, HD , VGA, SVGA, XGA, SXGA (1280 1024 60Hz)Tuner NTSC-MPC Input Analog RGB (D-Sub 15pin), DVI-D (HDCP)AC Input AC100-240V~, 50/60Hz, 5APower Consumption 380W
47MemoENMaintenance and Service
Maintenance and Service48Memo
Maintenance and Service49MemoEN
USER INFORMATIONNote: This equipment has been tested and found to comply with thelimit for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference when the equipment is operated in a commercialenvironment. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructionmanual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to causeharmful interference in which case the user will be required to connectthe interference at his own expense.Change or modification not expressly approved by the partyresponsible for compliance could void the user’s authority to operatethe equipment.This is a class B product. In a domestic environment this product maycause radio interference in which case the user may be required totake adequate measures.
90-X-4220-X2ANT-DAYEFK-00

Navigation menu