Dynamic Technology Group HUB Bluetooth earphones User Manual BE210 IM OP

Dynamic Technology Group Limited Bluetooth earphones BE210 IM OP

Users Manual

Note: The maximum total output current of this battery is 1A. Power cannot be discharged to the mobile device requiring amperage of more than 1A.Note: Dierent mobile device manufacturers have dierent requirement for the cable which are used for charging of mobile device. Dierent mobile devices have dierent charging verication modes and new product appear from time to time. Accordingly, we do not guarantee that our product can charge all devices. Some devices require special charging cables or connectors, or we can charge these products only by using our cables or connectors. For Apple device user, please use your own original cable for charging your device.Interpretation of the Power Case Status IndicatorCharging- The 4 LEDs will light up and ashing one by one when the Power Case is being charged.- When all 4 LEDs have been light up and no ashing, the Power Case battery is fully chargedDischarging- The 4 LEDs will be o one by one when it is discharging to other device.- When all 4 LEDs have been o, the Power Case battery is empty.Note: It is normal for the Air Twins and device to get warm during charging and discharging, and they may get even warmer if you use your device to, for example, play video or game while charging.SpecicationsBluetooth version: Bluetooth 5.0Operating distance: up to 33 feet (10 metres)Impedance: 16Earphone Sensitivity: 94 dB/mWFrequency: 20Hz – 20KHzPlaytime: Up to 2-3 hoursTalk time: Up to 3.5 hoursMaximum playtime with power case: Additional 30 hours music/talk timeInput Voltage: 5V/1AOutput Voltage: 5V/1ABattery Capacity: 1,500mAhCharging time: For earphone - 1.5 hour For Power case – 2 hours via USB cable or 3 hours via Wireless chargerDimension: 23.5 x 8 x 16.5 mm(for earphone), Dia.84 x 30mm (for Power case)Weight: 10 grams for pair of earbuds, 105 grams for Power casePower Case Cover Magnetic Charging DockLR(ECB) Earbud Control Touch keyEarbud LED IndicatorInterchangeable Ear TipsThe t of earphones can greatly aect sound quality, make sure you pick the correct tips and install on the earbuds correctly and follow the step below:1. Tilt the earbuds slightly forward and insert the eartip into your ear2. Adjust the t by rotating Air Twins backwards untilyou feel comfortable and secure tPersonalize your tAir Twins comes with three dierent sizes of interchangeable ear tips. A pair of ear tips is pre-mounted to the earphones. Make sure the caps seal your ear completely which leads to a proper sound quality. We recommend to try all caps and select the most secure one.Inserting the EarphonesActivate and ChargeBefore you can get started using Air Twins, it needs to be activated.1. Connect the Power Case to a computer or a power source via Micro-USB cable or simply place it on any wireless charging pad (not included).2.The LED indicator on the power case will started ashing and Air Twinswill start charging at the other end. We recommend you fully charge the Air Twins power case before your rst use.3. The battery is fully charged byMicro-USB cable - the LED indicator on the power case turns to level 4 Wirless charging pad – the BLUE LED indicator will be ON for 1 minutes ,and then turn O.Turn On Air Twins and Setup Inter-earbuds connection***The “L” & “R” Air Twins earbuds were paired with each other by default, user can simply take out bothearbuds from the case and it will trigger the inter-earbuds connection automatically.Remarks: Air Twins takes 3 seconds to turn on/off from the case, if it fails to trigger the auto-pairing function, you may turn on the earbuds by touching the ECB for 5 seconds.Once turn on Air Twins, the LED on “L” earbud will ash in Red/Blue while the LED on “R” earbud will ash in Blue, user can put on both earbuds and a voice notication “Connected” will be provided from “L” earbud, afterwards you can pair Air Twins with your digital device.If user took out both earbuds but failed to trigger the inter-earbuds connection, take a look of the LED indicator, if both are ashing in red and blue, it means that you are required to reset the inter-earbuds connections. In this case, simply reset your inter-earbuds connection.Reset the inter-earbuds connection1. Make sure both earbuds are power o2. Press and hold both ECB for 8 seconds and it will ash in red and blue quickly3. After few second, the earbuds will establish the connection with each other. The master (Left) earbud will ash in red and blue (pending for Bluetooth pairing) and the slave (Right) earbud will ash in blue every 5 seconds. A voice notication “Left channel” & “Right channel” will be triggered on-ear and you can pair Air Twins with your digital devices after the inter-earbuds connection stageConnect Air Twins with your digital devices AirTwins uses Bluetooth to connect with your digital devices. After turn on both earbuds:1. Select “BE210” and connect via Bluetooth on your digital device2. The Earbuds will notify you a message of “Connected”3. AirTwins is now ready to useExample: iPad / iPhonePress Settings > General > Bluetooth > Bluetooth ON > BE210 > PairExample: Android 6.0 SmartphonePress Settings > Bluetooth ON > Scan > BE210 > PairAmbient Mode On/OAmbient aound mode lets you hear your surroundings while you are listening to music outdoors. Simply short touch twice on the right ECB to turn On/O Ambient mode function.Playing MusicOnce you are connected via Bluetooth, simply select the music on your device and Air twins will play instantly, the following chart indicate how to remote control your music player:Function Action Play/Pause a track 1 short touch on Right ECBNext Track 1 short touch on Left ECBPrevious Track 2 short touch on Left ECBMaking or receiving calls:Air twins support hand-free call function for mobile devices. While using your mobile, you will have the option of using your Air twin as the Stereo headset, please make sure it is selected within your mobiles settings.Function Action Accept phone call Single touch ECBEnd phone call Double touch ECB(during phone call) Reject a call Long touch ECBApple Sirl, Google Long touch ECB for 2 seconds How to Charge your EarbudsPut your earbuds back to the magnetic holder, the earbuds LED will turn to red and indicate that it is charging.How to Charge a Mobile DeviceUSB output for emergency use to charge up your device when it’s low batery level.1. Connect your device to the USB output port on the Power Case with the Micro USB cable provided or use the original cable come with your device.2. Press the Power Button on the Power Case3. When your device is fully charged or you want to stop, disconnect the cable.Power Case Front ViewUSB OutputModel no. BE210www.yellacoustic.comDesigned by Ye!! in Hong KongMade in ChinaTroubleshootingNot turning on after take out the earbuds from the case• Make sure the Air Twins is fully charged• Make sure the Air Twins is switched on.• Place the earbuds back to the case again and take it out again after 3 secondsNo connection between Air Twins and your Bluetooth device.• Make sure the Air Twins is fully charged• Make sure the Air Twins is switched on.• Make sure your Bluetooth device is available and supports Bluetooth Advance Audio Distribution prole.• Make sure the Air Twins is within range of your Bluetooth device.Audio is not coming out from the Bluetooth Earbuds after Bluetooth device successfully paired.• Make sure the Bluetooth device volume is set to a comfortable listening level.• Try to reconnect your device with Air TwinsSafety informationRead all information and warnings before using Air Twins. Improper use of this product may lead to the product being damaged and you (the buyer, not the dealer) will be held responsible for damages such as overheating, the release of toxic fumes, re or explosion.• Do not attempt to charge Air Twins by using any other method other than a USB charger, power bank or computer• Do not modify or disassemble the battery• Do not dismantle or modify Air Twins in any way• Do not use the battery in bathrooms etc. Do not expose Air Twins to moisture or immerse it in liquid. •Keep Air Twins dry at any time.• Do not keep Air Twins in an environment that has excessively high temperatures, including intense sunshine• Do not throw this product into a re or leave in a hot environment. Avoid dropping or any other impact or friction to this product• Do not place Air Twins on ammable materials, such as bedding or carpets during charging• Do not touch Air Twins with wet hands• Disconnect the USB connector from Air Twins’s Power Case once fully charged• Only use this product within the following temperatures: 0° - 40°• Do not connect input and output in reverse• Do not charge Air Twins in excess of the rating suggested• If any issue arises when using Air Twins, disconnect the USB connector from the computer port and contact your dealer• In the unlikely event that any liquid from the inside of this product gets into your eyes, do not rub your eyes. Wash your eyes immediately with clean water and consult a physician• All Ye!! Acoustic’s products have been tested comprehensively to ensure quality. If you encounter any unusual heat, discoloration or product distortion during charging or storage, please stop using it immediately and contact the dealer. These issues may cause leakage, heat, smoke or ignition of Air Twins•Air Twins is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities (or lack of experience and knowledge) unless they have been given supervision or instructions concerning the use of Air Twins by a person responsible for their safety. Children should be supervised to ensure that they do not play with Air Twins, this is not a toy.Legal LiabilityAir Twins can only be used with compatible products and the Power Case can be used only with matching electronic equipment. Please read your equipment compatibility instructions to determine whether Air Twins matches your equipment requirements. The manufacturer will not be liable for any damage to your electronic equipment during the use of this product. Ye!! Acoustic will not held responsible for any equipment or accessories not suitable for use with Air Twins. The manufacturer will not be held liable for damage caused by misuse or damage incurred by the buyer or the third party rising from any intentional or unintentional use of Air Twins. As mentioned above, the manufacturers shall not be held liable for damage caused by misuse of the Air Twins.FCC ID:2AANE-BE210This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications or change to this equipment. Such modications or change could void the user’s authority to operate the equipment.This radio transmitter (identify the device by certication number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirement. True Wireless Stereo Earbuds with 1,500mAh Power CaseIncluded In this packageInterchangeable Ear TipsMicro USB Charging CableUser ManualOverviewBattery LEDIndicatorPower ButtonMicro-USB Charging Port Wireless Charging IndicatorAir Twins indication table1.Wireless Stereo OperationStep1-11-21-3StatusTurn on & Start pairing (Auto)Turn on & Start pairing (Manual)After connected with bluetooth deviceTurn O (Auto)Turn O (Manual)ControlTake out the earbuds from the charging case Long touch the ECB for 4-5 seconds--Put back the earbuds to the charging case Long touch the ECB for 5-6 secondsLED IndicationThe Left earbud will ash in blue/Red fastly, and the right earbud will ash in blue slowlyFlash in blue every 5 secondsBoth earbuds will be in RED light during chargingVoice noticationConnected, left channel, right channel and pairing----1.Mono Earbud PairingStep2-12-2StatusSelect either right or left earbudAfter connected with bluetooth deviceControlLong touch the ECB for 5 seoncds to turn ON manually--LED Indication- earbud will ash in blue/RedFlash in blue every 5 secondsVoice noticationpairingConnected1.General OperationStep3-13-23-33-43-53-63-73-83-9StatusAccept phone callEnd phone call (during phone call)Reject incoming callApple Sirl, GoogleLow batteryChargingFully chargedAmbient Mode ONAmbient Mode OFFControlSingle touch ECB buttonDouble touch ECB buttonLong touch ECB buttonLong touch ECB for 2 seconds----Double touch Right ECBDouble touch Right ECBLED IndicationBlue light is ashing------Red in ashRed light On(Earbuds)Blue light Flash (Charging Case)Red Light O (Earbuds)Blue light Always On (Charging Case)----Voice noticationRingtone----Beep sound noticationLow battery every 30 sec.----- Beep sound notication- Beep sound notication
Note: The maximum total output current of this battery is 1A. Power cannot be discharged to the mobile device requiring amperage of more than 1A.Note: Dierent mobile device manufacturers have dierent requirement for the cable which are used for charging of mobile device. Dierent mobile devices have dierent charging verication modes and new product appear from time to time. Accordingly, we do not guarantee that our product can charge all devices. Some devices require special charging cables or connectors, or we can charge these products only by using our cables or connectors. For Apple device user, please use your own original cable for charging your device.Interpretation of the Power Case Status IndicatorCharging- The 4 LEDs will light up and ashing one by one when the Power Case is being charged.- When all 4 LEDs have been light up and no ashing, the Power Case battery is fully chargedDischarging- The 4 LEDs will be o one by one when it is discharging to other device.- When all 4 LEDs have been o, the Power Case battery is empty.Note: It is normal for the Air Twins and device to get warm during charging and discharging, and they may get even warmer if you use your device to, for example, play video or game while charging.SpecicationsBluetooth version: Bluetooth 5.0Operating distance: up to 33 feet (10 metres)Impedance: 16Earphone Sensitivity: 94 dB/mWFrequency: 20Hz – 20KHzPlaytime: Up to 2-3 hoursTalk time: Up to 3.5 hoursMaximum playtime with power case: Additional 30 hours music/talk timeInput Voltage: 5V/1AOutput Voltage: 5V/1ABattery Capacity: 1,500mAhCharging time: For earphone - 1.5 hour For Power case – 2 hours via USB cable or 3 hours via Wireless chargerDimension: 23.5 x 8 x 16.5 mm(for earphone), Dia.84 x 30mm (for Power case)Weight: 10 grams for pair of earbuds, 105 grams for Power casePersonalize your tAir Twins comes with three dierent sizes of interchangeable ear tips. A pair of ear tips is pre-mounted to the earphones. Make sure the caps seal your ear completely which leads to a proper sound quality. We recommend to try all caps and select the most secure one.Inserting the EarphonesActivate and ChargeBefore you can get started using Air Twins, it needs to be activated.1. Connect the Power Case to a computer or a power source via Micro-USB cable or simply place it on any wireless charging pad (not included).2.The LED indicator on the power case will started ashing and Air Twinswill start charging at the other end. We recommend you fully charge the Air Twins power case before your rst use.3. The battery is fully charged byMicro-USB cable - the LED indicator on the power case turns to level 4 Wirless charging pad – the BLUE LED indicator will be ON for 1 minutes ,and then turn O.Turn On Air Twins and Setup Inter-earbuds connection***The “L” & “R” Air Twins earbuds were paired with each other by default, user can simply take out bothearbuds from the case and it will trigger the inter-earbuds connection automatically.Remarks: Air Twins takes 3 seconds to turn on/off from the case, if it fails to trigger the auto-pairing function, you may turn on the earbuds by touching the ECB for 5 seconds.Once turn on Air Twins, the LED on “L” earbud will ash in Red/Blue while the LED on “R” earbud will ash in Blue, user can put on both earbuds and a voice notication “Connected” will be provided from “L”earbud, afterwards you can pair Air Twins with your digital device.If user took out both earbuds but failed to trigger the inter-earbuds connection, take a look of the LED indicator, if both are ashing in red and blue, it means that you are required to reset the inter-earbuds connections. In this case, simply reset your inter-earbuds connection.Reset the inter-earbuds connection1. Make sure both earbuds are power o2. Press and hold both ECB for 8 seconds and it will ash in red and blue quickly3. After few second, the earbuds will establish the connection with each other. The master (Left) earbud will ash in red and blue (pending for Bluetooth pairing) and the slave (Right) earbud will ash in blue every 5 seconds. A voice notication “Left channel” & “Right channel” will be triggered on-ear and you can pair Air Twins with your digital devices after the inter-earbuds connection stageConnect Air Twins with your digital devices AirTwins uses Bluetooth to connect with your digital devices. After turn on both earbuds:1. Select “BE210” and connect via Bluetooth on your digital device2. The Earbuds will notify you a message of “Connected”3. AirTwins is now ready to useExample: iPad / iPhonePress Settings > General > Bluetooth > Bluetooth ON > BE210 > PairExample: Android 6.0 SmartphonePress Settings > Bluetooth ON > Scan > BE210 > PairAmbient Mode On/OAmbient aound mode lets you hear your surroundings while you are listening to music outdoors. Simply short touch twice on the right ECB to turn On/O Ambient mode function.Playing MusicOnce you are connected via Bluetooth, simply select the music on your device and Air twins will play instantly, the following chart indicate how to remote control your music player:Function Action Play/Pause a track 1 short touch on Right ECB Next Track 1 short touch on Left ECB Previous Track 2 short touch on Left ECB Making or receiving calls:Air twins support hand-free call function for mobile devices. While using your mobile, you will have the option of using your Air twin as the Stereo headset, please make sure it is selected within your mobiles settings.Function Action Accept phone call Single touch ECB End phone call Double touch ECB(during phone call) Reject a call Long touch ECB Apple Sirl, Google Long touch ECB for 2 seconds How to Charge your EarbudsPut your earbuds back to the magnetic holder, the earbuds LED will turn to red and indicate that it is charging.How to Charge a Mobile DeviceUSB output for emergency use to charge up your device when it’s low batery level.1. Connect your device to the USB output port on the Power Case with the Micro USB cable providedor use the original cable come with your device.2. Press the Power Button on the Power Case3. When your device is fully charged or you want to stop, disconnect the cable.Included In this packageAir Twins BE210Interchangeable Ear TipsMicro USB Charging CableUser ManualOverviewwww.yellacoustic.comDesigned by Ye!! in Hong KongMade in ChinaTroubleshootingNot turning on after take out the earbuds from the case• Make sure the Air Twins is fully charged• Make sure the Air Twins is switched on.• Place the earbuds back to the case again and take it out again after 3 secondsNo connection between Air Twins and your Bluetooth device.• Make sure the Air Twins is fully charged• Make sure the Air Twins is switched on.• Make sure your Bluetooth device is available and supports Bluetooth Advance Audio Distribution prole.• Make sure the Air Twins is within range of your Bluetooth device.Audio is not coming out from the Bluetooth Earbuds after Bluetooth device successfully paired.• Make sure the Bluetooth device volume is set to a comfortable listening level.• Try to reconnect your device with Air TwinsSafety informationRead all information and warnings before using Air Twins. Improper use of this product may lead to the product being damaged and you (the buyer, not the dealer) will be held responsible for damages such as overheating, the release of toxic fumes, re or explosion.• Do not attempt to charge Air Twins by using any other method other than a USB charger, power bankor computer• Do not modify or disassemble the battery• Do not dismantle or modify Air Twins in any way• Do not use the battery in bathrooms etc. Do not expose Air Twins to moisture or immerse it in liquid.• Keep Air Twins dry at any time.• Do not keep Air Twins in an environment that has excessively high temperatures, including intense sunshine• Do not throw this product into a re or leave in a hot environment. Avoid dropping or any otherimpact or friction to this product• Do not place Air Twins on ammable materials, such as bedding or carpets during charging• Do not touch Air Twins with wet hands• Disconnect the USB connector from Air Twins’s Power Case once fully charged• Only use this product within the following temperatures: 0° - 40°• Do not connect input and output in reverse• Do not charge Air Twins in excess of the rating suggested• If any issue arises when using Air Twins, disconnect the USB connector from the computer port andcontact your dealer• In the unlikely event that any liquid from the inside of this product gets into your eyes, do not rub youreyes. Wash your eyes immediately with clean water and consult a physician• All Ye!! Acoustic’s products have been tested comprehensively to ensure quality. If you encounter any unusual heat, discoloration or product distortion during charging or storage, please stop using it immediately and contact the dealer. These issues may cause leakage, heat, smoke or ignition of Air Twins• Air Twins is not intended for use by persons (including children) with reduced physical, sensory ormental capabilities (or lack of experience and knowledge) unless they have been given supervision orinstructions concerning the use of Air Twins by a person responsible for their safety. Children shouldbe supervised to ensure that they do not play with Air Twins, this is not a toy.Legal LiabilityAir Twins can only be used with c ompatible products and the Power Case can be used only with matching electronic equipment. Please read your equipment compatibility instructions to determine whether Air Twins matches your equipment requirements. The manufacturer will not be liable for any damage to your electronic equipment during the use of this product. Ye!! Acoustic will not held responsible for any equipment or accessories not suitable for use with Air Twins. The manufacturer will not be held liable for damage caused by misuse or damage incurred by the buyer or the third party rising from any intentional or unintentional use of Air Twins. As mentioned above, the manufacturers shall not be held liable for damage caused by misuse of the Air Twins.FCC StatementThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications or change to this equipment. Such modications or change could void the user’s authority to operate the equipment.This radio transmitter (identify the device by certication number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirementCaution:Any changes or modifications to this device not explicitly approvedby manufacturer could void your authority to operate thisequipment..

Navigation menu