Dynabook DCE45202A Tri-Mode Dual Band Analog/PCS Phone User Manual

Toshiba Corporation Tri-Mode Dual Band Analog/PCS Phone

User Manual

CDM-9200XOWNER'S OPERATING MANUALDraftNov. 2001TABLE OF CONTENTSSAFETY INFORMATION FOR WIRELESSHANDHELD PHONES .......................................................... 1SAR INFORMATION.............................................................. 2HANDSET DESCRIPTION .................................................... 3Function of Keys ................................................................. 4GETTING STARTED ............................................................. 5Placing Calls .....................…................................................ 6Receiving Calls ...................….............................................. 7OPERATING PROCEDURES …............................................ 8APPLICANT: TOSHIBA CORPORATIONTRANSCEIVER TYPE: CJ6DCE45202AEXHIBIT Type "User Manual"
SAFETY INFORMATION FORWIRELESS HANDHELD PHONESSAFETY INFORMATION FORWIRELESS HANDHELD PHONESRead this information before using your handheldportable Cellular Telephone.Your wireless handheld portable telephone is a lowpower radio transmitter and receiver. When it is ON, itreceives and also sends out radio frequency (RF) sig-nals.FCC RF EXPOSURE INFORMATIONIn August 1996, the Federal Communications Commis-sion (FCC) of the United States, with its action in Re-port and Order FCC 96-326, adopted an updated safetystandard for human exposure to radio frequency (RF)electromagnetic energy emitted by FCC regulated trans-mitters. Those guidelines are consistent with the safetystandard previously set by both U.S. and internationalstandards bodies. The design of this phone complieswith the FCC guidelines and these international stan-dards.Use only the supplied or an approved antenna. Unau-thorized antennas, damaged antennas, modifications,or attachments could impair call quality, damage thephone, or result in violation of FCC regulations. Pleasecontact your local dealer for replacement antenna.Body-worn OperationThis device was tested for typical body-worn operationswith the BC-9200 belt-clip,offered by Audiovox as an accessory to this phone,and found to comply with FCC RF exposure require-ments. Third-party belt-clips, holsters and similar ac-cessories should be avoided, as they have not beentested and may not comply with FCC RF exposure lim-its.For more information about RF exposure, please visitthe FCC website at www.fcc.gov .11
phones used by the public is 1.6 watts/kg (W/kg) averagedover one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for thepublic and to account for any variations in measurements.SAR INFORMATIONSAR INFORMATIONTHIS MODEL PHONE MEETS THE GOVERNMENT’S RE-QUIREMENTS FOR EXPOSURE TO RADIO WAVES.Your wireless phone is a radio transmitter and receiver. It isdesigned and manufactured not to exceed the emission limitsfor exposure to radiofrequency (RF) energy set by the Fed-eral Communications Commission of the U.S. Government.These limits are part of comprehensive guidelines and estab-lish permitted levels of RF energy for the general population.The guidelines are based on standards that were developedby independent scientific organizations through periodic andthorough evaluation of scientific studies. The standards includea substantial safety margin designed to assure the safety ofall persons, regardless of age and health.The exposure standard for wireless mobile phones employs aunit of measurement known as the Specific Absorption Rate,or SAR. The SAR limit set by the FCC is 1.6 W/kg.* Tests forSAR are conducted with the phone transmitting at its highestcertified power level in all tested frequency bands. Although theSAR is determined at the highest certified power level, the ac-tual SAR level of the phone while operating can be well belowthe maximum value. This is because the phone is designed tooperate at multiple power levels so as to use only the powerrequired to reach the network. In general, the closer you are toa wireless base station antenna, the lower the power output.Before a phone model is available for sale to the public, itmust be tested and certified to the FCC that it does not ex-ceed the limit established by the government-adopted require-ment for safe exposure. The tests are performed in positionsand locations (e.g., at the ear and worn on the body) as re-quired by the FCC for each model. The highest SAR value forthis model phone when tested for use at the ear is 1.34 W/kgand when worn on the body, as described in this user guide,is 1.32 W/kg. (Body-worn measurements differ among phonemodels, depending upon available accessories and FCC re-quirements). While there may be differences between the SARlevels of various phones and at various positions, they all meetthe government requirement for safe exposure.The FCC has granted an Equipment Authorization for thismodel phone with all reported SAR levels evaluated as in com-pliance with the FCC RF exposure guidelines. SAR informa-tion on this model phone is on file with the FCC and can befound under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID CJ6DCE45202A.Additional information on Specific Absorption Rates (SAR) canbe found on the Cellular Telecommunications & Internet As-sociation (CTIA) web-site at http://phonefacts.net.*In the United States and Canada, the SAR limit for mobile2
HANDSET DESCRIPTION Volume ButtonVAD ButtonEarpieceLCD ScreenLEDFunction KeysKeypadMicrophone3
Function of KeysLCD Display IndicationDigit KeysFunction Keys4GHI7PQRS2ABC5JKL8TUV3DEF6MON9WXYZTo enter Telephone Numbers.To enter letters and symbols is also used for One-TouchEmergency feature.Key - Board Arrangement1ABCCLRSoft keys. To function as shown in the bottom lineon the display.SEND keys. To originate or receive a Call.END keys. To terminate a Call and to turn thephone ON/OFF.Receiving Signal Stengh Indicator.The number of lines indicates the received Signal Strengh, and is also used as a POWER ON Indicator.Digital Mode Indicator.To indicate the phone is operating in digital mode.Meessage Indicator. To indicate that new Text Messagesare stored in memory or new Voice Messages are in yourVoice Mailbox.Vibrating Indicator. To indicate that the vibrating alert isactive.Battery Indicator. Monitors the battery charge condition.A Call is in progress.The phone is out of Service Area.The phone is out of the home Area.To readout Text Message or Voice Mail Notification.Also used as Left-arrow key.To recall phone numbers from memory.Also used as Left-arrow key.Used as Up/Down-arrow keys.Wap.Call history.To clear digits from the display or from a memorylocation.CLRItems Descriptions01@ ̈̇̄̆̈̇̄̄̆̆4
GETTING STARTEDPress and hold [ ]. All the indicators and the display will lightmomentarily, and a tone will be heard. The indicator will bedisplayed while the phone is on.Antenna PositionThe antenna can be used in its fully extended or fully retractedposition only. It is recommended that the antenna should be fullyextended for optimum performance and signal strength or whileoperating in poor signal areas.Receiving Signal Strength Indicator ( )The number of lines indicates the Signal Strength in your area.Four lines show the maximum level. The display will vary as youmove with the phone. If the signal is not strong enough to placea call. will appear on the LCD dispaly.Battery Level IndicatorYou can always monitor the battery charge condition with theconstant battery level indicator. The number of blocks indicatesthe battery conditions as follows;Turning the Phone On/OffFull chargeLow chargeFlashing indicates discharged.To turn the phone off, press and hold [ ].5
Placing CallsTo Place a CallsSpeed DialingIf you know the phonebook address of the telephone numberthat you want to call.1. Enter the one or two digits of your Phonebook address (1 to 9 or 10 to 99).2. Press [ ]. The phone number will be displayed.The [ ] indicator will light, and the call will be placed.CLRCLR1. Enter the phone number.(A maximum of 32 digits will be displayed.)2. Press [ ].The indicator will light.To Corrert a NumberPress to clear the last digit.Press and hold to erase all the digits entered.If the Call Fails to Go throughPress [ ] and [ ] to redial the number.To Terminate a CallPress [ ]. The indicator will go out.6
Receiving CallsCaller ID with NameThis feature allows you to preview in your display the numberand name of the party calling you before you answer the call.The name is as you programmed it in your phonebook.1. When the phone rings, the Calling Number appears in the display.2. The last 10 Caller IDs are stored in the memory for your review and redial. To Receive a CallWhen the telephone rings, press [ ] to answer the call.The indicator will light.Any Key AnsweringThis feature permits you to answer an incoming call by pressingany key on the key pad except [ ].7
OPERATING PROCEDURESOPERATING PROCEDURESNever violate any of the following Rules and Regula-tions of the FCC when using your Cellular Phone. Suchviolations are punishable by fine, imprisonment or both.•Never use obscene, indecent, or profane lan-guage.•Never use your Cellular Phone to send false dis-tress calls.•Never wiretap or otherwise intercept a phone call,unless you have first obtained the consent of theparties participating in the call.•Never make any anonymous calls to annoy, ha-rass, or molest other people.•Never charge another account without authoriza-tion, to avoid payment for service.•Never willfully or maliciously interfere with anyother radio communications.•Never refuse to yield the line when informed thatit is needed for an Emergency Call. Also, nevertake over a line by stating falsely that it is neededfor an emergency.8

Navigation menu