Draeger Medical Systems MS18623 Telemetry Transceiver TeleSmart M300 User Manual TSC f80 en TUVdraft

Draeger Medical, Inc. Telemetry Transceiver TeleSmart M300 TSC f80 en TUVdraft

User Manual 3

12-14 TUV Draft Infinity CentralStation VF812: Recordings / ReportsShift Report Cover1Cursor time minus selected report length (2, 4, 8, 12, 24 hrs) 2Delay3 Recording Speed4Patient information5Each waveform contains 5 seconds of pre-event data and 5 seconds of real-time data. DRAFT
Reports VF8 Infinity CentralStation TUV Draft 12-15 Patient StatusThe Patient Status section of the Shift Report is a summary report focusing on a patient's arrhythmia status. A Patient Status Report is also available as an independent report and can be configured to print 2, 4, 8, 12, or 24 hours of data (page 12-24). 1Header Information 6Supraventricular Ectopics2Heart Rate, calculated from trend data 7Caliper Results3Pacemaker 8S-T Deviation (from ST trends)4Bradycardia 9Latest Alarm Event (in alarm categories)5Ventricular Ectopics 10 Comment area DRAFT
12-16 TUV Draft Infinity CentralStation VF812: Recordings / ReportsGraphical TrendsIn the Graphical Trends section of the Shift Report each parameter trend is plotted according to type.This section resembles the full version Graphical Trend Report in appearance and content (page 12-18) but is numbered and labeled as part of the Shift Report.Parameter Type Appearance on Trend GraphSingle-value, continuous such as HRSingle, continuous lineSingle-value, intermittent such as C.O.Cross-hairs representing each valueMulti-value, continuous such as ARTLines with a dotted line in the center indicating the mean valuee.g., The top and bottom line can represent systolic and diastolic values.Multi-value, intermittent such as NBPVertical line with a blank space in the center indicating the mean valueDRAFT
Reports VF8 Infinity CentralStation TUV Draft 12-17 Selected Events Depending on how many events you select (page 14-16) the selected events section may consist of up to three pages (4 waveform strips each). You must select each event that will appear in this section of the shift report by clicking on the icon so that a check mark displays on the icon.1Cursor time minus selected report length (2, 4, 8, 12, 24 hrs)2Delay3Recording speed 4The waveform contains 5 seconds of pre-event data and 5 seconds of real-time data. The event marks the middle of the waveform.5Event Label6Event Marker7Example of an annotated eventDRAFT
12-18 TUV Draft Infinity CentralStation VF812: Recordings / ReportsGraphical Trend ReportThe Graphical Trend Report is a multi-parameter report containing up to 15 trended parameters from bedside or telemetry patients. The report can be configured to print 2, 4, 8, 12, or 24 hours of Full or Event Disclosure data. The cursor time represents the report ‘stop time’; the report ‘start time’ equals ‘stop time’ minus the report length. You can customize the trend selection per patient (page 12-25) or at system setup (page 3-4). The trend scale can be a fixed scale or have autoscale values. When you select Enable Autoscale (page 12-25) in the Trend Order Setup screen, the low and high scale values are determined by an autoscale factor to the highest and lowest parameter value over the currently selected trend time. To request a Graphical Trend Report, see page 12-23.Selected Strip ReportThe Selected Strip Report allows the user to select a waveform of interest within Full Disclosure and define beginning and ending cursor times (not to exceed one hour). The report can contain 8 seconds to 1 hour of information (8 second default) with 8 seconds of waveform data per row. To request this report, see page 12-24. Selected Events ReportThe Selected Events Report may consist of up to six pages (4 event strips per page). You can select and print the most recent 24 events. Each waveform contains 10 seconds of data, and is annotated with Lead Printed, Lead Processed, Event Cause, 12 of the most recent parameter values, Event End Time, and Event Date. If the lead processed is stored in the Infinity CentralStation database, it will be printed on the report. If not, the top lead of the displayed Full Disclosure data will appear.To request this report, see page 12-24.Parameter Autoscale Factor (approximate)HR 10 bpmPVC/min 10% Paced 10%SpO2 10%PLS 10ST 1.0 mm0.10 mVSTVMSTCVMPressures (including NBP) 10 mmHg1 kPaAll others 10DRAFT

Navigation menu