Dongguan Taide BT015 Bluetooth speaker User Manual I

Dongguan Taide Industrial Co., Ltd. Bluetooth speaker I

Contents

15_BT015 UserMan

BLUETOOTH SPEAKER Model: BT015 FCC ID: OYCBT015 INSTRUCTION MANUAL
WARNING This appliance is intended for domestic household use only and should not be used for any other purpose or in any other application, such as for non domestic use or in a commercial environment. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. No naked flame sources, such as lighted candles, should be placed on the apparatus. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Ventilation Allow at least a 10 cm gap all around the product. This apparatus is not suitable for use in a tropical climate. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. To protect the environment, use local recycling facilities for battery
disposal. BATTERY HANDLING AND USAGE The product is supplied with 1 rechargeable Lithium 3.7V 300 mA battery incorporated in the product which is not accessible and cannot be replaced. Therefore when the product reaches the end of its useful life it must be disposed of at a recycling centre. OVERVIEW Mini-USB / 3.5 mm plug cable OPERATION 1. Turn on the speaker. The blue indicator light will flash to detect Bluetooth enabled devices near you. The blue indicator light will stop flashing if no Bluetooth device is detected within around 5 minutes. 2. Pair the speaker with the desired Bluetooth device. OR connect the speaker to the music player using the 3.5 mm plug of the cable.
NOTE: If you need to pair the speaker with another Bluetooth device, disconnect the speaker from the Bluetooth device already in use first. Charging the speaker The speaker has a built-in Lithium battery. The battery is rechargeable and provides approx 2-hour continuous operation when fully charged. Use the mini-USB connector of the cable to charge the speaker. The red indicator light will illuminate. The red indicator light will go out when the speaker is fully charged. SPECIFICATIONS 5V 500 mA Transmission distance: ≤ 10 m (It varies when the environmental factors and the connected Bluetooth devices are different) Built-in battery: Lithium battery We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development. Disposal
As a responsible retailer we care about the environment. As such we urge you to follow the correct disposal procedure for the product, packaging materials and if applicable, accessories and batteries. This will help conserve natural resources and ensure that the materials are recycled in a manner that protects health and the environment. You must follow laws and regulations about disposal. Waste electrical products and batteries must be disposed of separately from household waste when the product reaches the end of its life. Contact the store where you bought the product and your local authority to learn about disposal and recycling. The batteries must be disposed of at your local recycling point.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu