Domo Tactical Communications NETNODEP4 Phase 4, Agile Mesh Netnode Module D1707 User Manual OEM INSTRUCTIONS D17XX V0 3

Cobham Surveillance Segensworth Phase 4, Agile Mesh Netnode Module D1707 OEM INSTRUCTIONS D17XX V0 3

Contents

OEM INSTRUCTIONS D17XX V0.3

D17XX IP Mesh Transceiver Card COFDM– Video, Audio, Telemetry and IP Products January 2016 Data Sheet The most important thing we build is trust The D17XX is a single card IP Mesh transceiver with dual receive diversity. Several D17XX transceivers can be used to generate a fluid self forming, self healing mesh containing up to sixteen nodes. The D17XX transceivers within the mesh exchange data on a single frequency, simpli-fying frequency management. The entire mesh system occupies just 2.5MHz of bandwidth (3.0, 3.5, 5.0 and 6.0MHz also available). The D17XX transceivers employ a unique COFDM modulation scheme and therefore offer excellent RF penetration and performance in the presence of multipath. The D17XX transceivers can provide up to 8.8Mb/s of IP data (data rate depends on mode, number of nodes and range between nodes). This available bit-rate can be used to exchange IP data traffic be-tween nodes. The highly flexible mesh topology means that data can be exchanged between nodes in a point-to-point or multi-point fashion; range can be extended by using nodes as repeaters. The self-forming, self-healing mesh architecture makes the D17XX transceiver ideal for use in mobile surveillance ap-plications, command and control applications, or advanced robotics. The D17XX can be connected to third party composite or PTZ cameras using the AVI option. Two PTZ control channels are available to control PTZ cameras. Alternatively third party IP cameras can also be directly connected to the D17XX. Security of the entire mesh network can be ensured by the use of the optional AES128 or AES256 encryption. Control of the deployed mesh is achieved using the inbuilt web browser or comprehensive Mission Commander PC application. Equipped with Ethernet and serial control interfaces, the D17XX is easy to integrate into a larger system. The key design criteria for this solution were low power consumption, small size, and ease of integration. Introduction www.cobham.com/tcs
January 2016 Data Sheet Features www.cobham.com/tcs  Single card solution, includes 2 receivers, 100mW power amplifier and T/R switching.  Low power, typically 4W when meshed to another node at 100mW. [Power consumption is dependent on data rate, channel BW and number of nodes.]  2.5MHz / 3MHz / 3.5MHz / 5MHz and 6MHz operating bandwidth modes  Two-way diversity Maximum Ratio Combining for fade and multipath elimination  Internal AES 128 / 256bit encryption (optional)  Twin IP interfaces  Multiple Serial interfaces  SMP RF connectors for reduced size and ease of connection  Optional Encoder offering very low delay video operation for real time applications  Interfaces for optional external amplifier up to 2W  Talk-back Audio  Micro SD card for 32GB storage via flexible circuit connector  FCC approval for the D17XX as an OEM Module. Isometric View D17XX
January 2016 Data Sheet RF Tuning Step Size Output Power Bandwidth Mesh Capacity Modulation Carrier Modulation FEC Rate Receive Diversity Receive Sensitivity 125kHz step +20 to -10dBm, 0.25dB steps (100mW) 2.5, 3.0, 3.5, 5.0, 6.0 MHz Up to 8.8Mb/s COFDM 360 carrier modulation BPSK, QPSK or 16QAM (adaptive) FEC1/2, FEC2/3 (adaptive) Maximum Ratio Combining -98dBm (BW 2.5MHz / BPSK 1/2) IP Interface Ethernet electrical IP Address Alloc. Video & Audio stream-ing format 100BaseT Ethernet DHCP dynamic IP Addressing Multicast VLC compatible UDP & RTSP Support Open Audio comms channel Audio Comms channel Compression Interface Microphone level/headphone G726 32kbit audio Encryption Type AES128 or AES256 (both optional) GPS Dedicated GPS I/F RS232/RS485 Data Interface RS232/RS485 data 1K2 to 115K2 baud switchable, UDP & TCP routing protocol Control Local Control Remote control Bicolour LED indicates power and mesh status. Mission Commander PC App. Web browser control Specification www.cobham.com/tcs Frequency Selection D1700 D1702 D1703 D1705 D1707 D1710 D1713 D1715 200 – 300 MHz 300 – 470 MHz 450 – 600 MHz 1140 – 1500 MHz 1980 – 2550 MHz 3000 – 3700 MHz 4400 – 5000 MHz 5500 – 6000 MHz Interfaces Antenna 1 [Rx] Antenna 2 [Tx/Rx] Transmitter Port External PA input Power Ethernet 1 Ethernet 2 Control and Misc Camera (A/V) SMP J19 SMP J22 SMP J24 SMP J6 JST J2 JST J14 JST J15 JST J3 (RS485) JST J12 (RS232) Optional Card—D550
Physical Mass Dimensions 82g 90mm x 85mm Power DC Input Power Consumption 8-16V Typically 4W when meshed to a sin-gle node at 100mW Tx power. [Power consumption is dependent on data rate, channel BW and num-ber of nodes] A/V input (Separate Card Option) Video Input Video Format Video Encoding Quality Video bit-rate Resolution Frame Rate Audio Input Audio Sampling Freq. Audio encoding Audio bit-rate Composite or SDI (selectable) 525 or 625 (PAL or NTSC) MPEG4 Low/Medium/High (selectable) 2.4Mbit/s to 50kb/s (variable) 704, 576, 480 or 352 Self-selecting 30 to 2F/s Line level or Microphone level 48kHz MPEG audio layer 1 384 to 64kb/s Store and For-ward options Storage Format Record Options Files Download AV Clip Size Secure Digital (SD) Card interface—optional Continuous or Triggered From web browser interface (Milestone) 30 seconds Environment Temperature Range -10 to +50 °C January 2016 Data Sheet www.cobham.com/tcs
January 2016 Data Sheet Mechanical Drawings D17XX The information contained in this document is the property of Cobham Tactical Communications and Surveillance. This document and the information contained herein is provided for evaluation purposes only and is subject to change without notice. Cobham Tactical Communications and Surveillance assumes no responsibility for errors that might appear in this document and gives no representations or warranties as to the accuracy of the information contained herein, including but not limited to the suitability and performances of the product or its intended application. © Copyright Cobham TCS limited 2012, All Rights Reserved Singapore Sales Office 42 Toh Guan Road East Enterprise Hub 01-73 608583 Singapore Brazil Sales Office Av. das Nações Unidas 12551- 17ºandar - Sala 1725 04578-903 São Paulo Cobham Tactical Communications and Surveillance North America 2303 Dulles Station, Suite 200 Herndon, VA 20171, USA Cobham Tactical Communications and Surveillance International Fusion 2,1100 Parkway Whiteley, Hampshire PO15 7AB, UK T: +44 1489 566 750 www.cobham.com/tcs
FCC compliance statements 5.4 FCC 5.4.1 FCC Subpart 15A Rule Section 15.21 CAUTION: The user of an intentional or unintentional radiator shall be aware that changes or modi-fications not expressly approved by Cobham could void the user’s authority to operate the equip-ment. 5.4.2 FCC Subpart 15B Rule section 15.105 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital de-vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec-tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be de-termined by turning the equipment off and on, the user is encouraged to try to correct the interfer-ence by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 5.4.3 FCC Subpart 15A Rule section 15.19(a)(3) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital de-vice, pursuant to part 15 of the FCC Rules. “This device complies with part 15 of the FCC Rules. Operation is subject to the following two condi-tions: (1) This device may not cause harmful interference, and ( (2) This device must accept any interference received, (2) Including interference that may cause undesired operation.” 5.4.4 RF Exposure Guidance The unit must be operated at least 20cm away from the body for RF exposure compliance purposes 5.4.5 Module Certification This module Is FCC approved at 100mW, if an additional external amplifier is co located with this approved module, then the above listed FCC approval will be invalidated under the conditions of the approval. Compliance.

Navigation menu