Divoom Technology BLUETUNE-1 Multimedia Speaker System User Manual

Shenzhen DIVOOM Technology Co., Ltd. Multimedia Speaker System

UserManual.wiki >

Divoom Technology >

BLUETUNE 1 User Manual

user manual

User manual Warning: Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Install in accordance with the manufacturer’s instructions. Place the speakers in a stable location so they will not fall causing damage to the speakers or cause bodily harm. Do not use the speakers near water, and do not immerse them in any liquid or pour any liquid on them. Do not block the openings on the speaker cabinets, never push objects into speaker vents or slots because of fire or electric hazards, Please insure reasonable space around the speakers for proper ventilation. Do not install near any heat sources such as ra diators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat. Only use attachments/accessories specified by the manufacturer. Do not place near any form of open flame source, such as lighted candles, on the apparatus. Do not get the speaker wet. Refer all servicing to qualified service personnel. Warning: to reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

Welcome: Thank you for purchasing this product. Bluetooth Multimedia Speaker System. It can simply connects wire lessly to your bluetooth-enabled devices and can also link to any of your wired speakers to enjoy wireless listening. This instruction manual will get you started and ready to make the most of y our Multimedia Speaker System of your Multimedia Speaker System Package Contents: The package contains the following: 1 pc of Multimedia Speaker System 1 pc of micro USB recharging cable 1 pc of manual Parts: 1. Micro USB charging port 2. Audio out jack 3. Power Button 4. pairing button 5. Volume - 6. Volume + 7. 3.5mm audio cable Connection Listen to your Bluetooth-Enabled music player 1. long press and hold the “Power Button” to turn on your Multimedia Speaker System 2. Press and hold the Pairing Button for 3 seconds till LED begins to alternate red and blue 3. put your audio device in Bluetooth pairing mode， your device will search for the Multimedia Speaker System, if you are asked for a passkey , enter 0000 4. start your audio device playing 5. make sure y our audio device is within range of t he Multimedia Speaker System (approximately 10 meters ) Once paired, the LED will show blue with sustained light. 6. adjust the volume. 7. find your desired song.

Link to any of your wired speakers to enjoy wireless stereo listening. 1. Locate a 3.5mm stereo cable (not included) 2. plug one end of the stereo cable into your wired speaker 3. plug the other end of the stereo cable into your Multimedia Speaker System’s “audio out” jack 4. turn on your wired speaker 5. turn on your Multimedia Speaker System 6. paring with your Bluetooth-enabled audio device (refer the above operation steps) 7. enjoy wireless stereo listening… Listen to your non-Bluetooth-enabled audio device 1. insert the 3.5mm audio cable which locate at the base of your speaker into your audio device directly. 2. turn on your speaker 3. turn on you audio device and start the music playing. 4. adjust the volume 5. find your desired song.

Navigation menu