Digital Cynos DCM-17WT 17` WIDE TFT-LCD TV MONITOR User Manual USERS MANUAL

Digital Cynos Co., Ltd. 17` WIDE TFT-LCD TV MONITOR USERS MANUAL

Contents

USERS MANUAL

17” Wide TFT-LCD TV User’s ManualModel : DCM-17WTThank you for selecting our 17” TFT-LCD TV monitor. Please take a few minutesto read this user’s manual for the best performance of this TV. Please keep this user’s manual for future reference.The present home appliance is certified and approved by EMC/EMI and can beused in all places including residency area.Information in this manual is subject to change without prior notice. Ver1.00E
FCC InformationThis equipment has been tested and found to comply with limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment can generates, uses, and radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful inteference to radioCommunications. However, there is no guarantee that interference will not occur in a particularinstallation.If this equipment does cause unacceptable interference to radio and television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures. ■Reorient or relocate the receiving antenna.■Increase the separation between the equipment and receiver.■Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.■Consult the dealer or an experienced Radio/ TV technician for help.3DCM-17WT Cation : Any changes or modifications in construction of this device whice are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
<Warning> for Installation1. Do not put a glass of water, chemical substances or any small metal objecton the TV set.󰦞This may cause damage, electric shock or fire. If a foreign substance getsinto the set, unplug it and contact a service center.2. Keep your TV set out of humidity and dust.󰦞An electric shock or fire could occur in the TV set.3. Do not use or store inflammable substances near the set.󰦞This may cause an explosion or fire.4. Do not place the TV on an unstable cart, stand, tripod, bracket or table.Otherwise, it can fall.󰦞The set can be damaged seriously if this happens.󰦞Place the TV set on a stable surface.5. Do not place or use any inflammable spray, materials, etc. near the TV set.󰦞This may cause an explosion or fire.6. Do not keep the set under feeble and bad ventilation condition such as onthe bookshelf or in the wall closet.󰦞This may cause a fire by increasing internal temperature of the set.7. Do not place power cord near radiator or heat register.󰦞This may cause an electric shock or fire by melting power cord’s coating.8. An outdoor antenna system should not be placed near overhead power lines,other electric lines, power circuits, etc.󰦞This may cause an electric shock or fire.9. Bend the outdoor antenna cable, which is located in the building. This is toprevent the rainwater from coming into through the antenna cable.󰦞This may cause an electric shock or fire.10. Do not place the TV set on an unstable cart, stand, tripod, bracket or table.Otherwise, it can fall.󰦞This can cause serious injury to a child or adult and serious damage to theappliance.11. Do not incline the TV set over 15o.󰦞This may cause serious injure to a child or adult and serious damage tothe appliance.Safety InstructionsTo reduce the risk of fire, electrical shock, and other injuries, keep these safetyprecautions in mind when installing, using, and maintaining your machine.Here is Notice mark with <Warning> & <Caution> and its meanings areas followed;<Warning> : If you manipulate against the notice, it may cause seriousinjury or death to user.<Caution> : If you manipulate against the notice, it may cause slightinjury to user or appliance.<Warning> for Power1. Do not use damaged or loose plug and receptacle.󰦞This may cause an electric shock or fire.2. Do not touch the plug with wet hands.󰦞This may cause an electric shock.3. Do not connect too many extension cords or plugs to a wall outlet.󰦞This may cause a fire.4. Do not bend the plug and wire excessively or place heavy objects uponthem, which could cause damage.󰦞Failure to do so may cause an electric shock or fire.5. Plug the power cord perfectly into a wall outlet.󰦞Unstable connection of the power cord may cause a fire.<Caution> for Power1. Hold the head part of power cord when you unplug it from the wall outlet.󰦞Its violation may cause unexpected heating or fire by wires damage.2. Disconnect the plug from the outlet while cleaning the TV.󰦞Its violation may cause an electric shock or fire.4 5DCM-17WT
CONTENTSMain Features Package Contents TV Parts Connection Remote Control 1. Buttons 2. Installing Batteries in the Remote Control 3. Power On/Off 4. TV mode / Monitor mode 5. Change Input Source 6. How to use MENU 7. Memorizing TV Channel 8. Changing TV Channel 9. Volume Control / MUTE10. Auto Adjustment of Monitor Display 11. Display Pause 12. Set PIP / Control Screen Size13. Change PIP Position 14. Control Screen Size Function Button TV Menu PC Monitor Menu Size Specification 1. Specification 2. The Standard Signal Mode for PC Monitor Troubleshooting A/S (After-Sales Service)<Caution> for Installation 1.Place the TV at a certain distance from the wall for ventilation.󰦞If not, it may cause a fire by increasing internal temperature of the TV.2. Do not cover the vents on the monitor cabinet.󰦞Bad ventilation may cause a breakdown or fire.3. Place the monitor on a flat and stable surface.4. Lift the monitor using both hands when you move it.<Warning> for Use1. Disconnect the plug from the outlet during storms, lightening or your longabsence.󰦞Failure to do so may cause an electric shock or fire.2. After you removing the batteries from remote control, keep them out ofchildren’s reach. Children or infants may swallow them.󰦞If it happens, contact your doctor immediately.3. Never insert any metal object into monitor openings.󰦞This may cause an electric shock, fire or injury.4. Do not remove its cover (or back). No user serviceable parts inside.󰦞This may cause an electric shock or fire. Refer servicing to qualifiedservice personnel.<Caution> for Use1. Unplug the TV from the wall outlet when not being used for a long period oftime.󰦞If not, the dust heated in the unit may cause an electric shock or fire.2. Unplug the TV from the wall outlet and disconnect the antenna or cablesystem when moving it to other places.󰦞If not, it may cause damage to cable system and cause an electric shockor fire.3. Unplug the power cord from wall outlet if you notice strange smoke, soundor smell from the TV set, and refer servicing to qualified service personnel.󰦞This may cause an electric shock or fire.4. Unplug the TV from the wall outlet before cleaning. Use a damp cloth but notliquid or aerosol cleaners.󰦞If not, an electric shock or fire may be provoked.6 7DCM-17WT 567891015192021222310151920212223101519202122232223
Package Contents Please make sure the following items are included with your LCD TV. If anyitems are missing, contact with your dealer.Main Features■Easy & convenient InstallationUnlike conventional CRT TV, its slim size and design allow user to install anduse without much limitation.■Easy-to-use FunctionUser can enjoy using the product even more due to its easy-to-use remotecontrol and rotary function buttons on TV■Simple installation on the wall User can install the unit on the wall simply with three screws or nails.(Attention: The wall should be solid enough to avoid that the unit is crooked ordropped.) ■Auto AdjustmentYou can simply adjust the TV to the best conditions with one button.■Remarkable Functional ExtensionThe unit carries out the functions of PC monitor as well as TV and can work inconnection with various products such as DVD, VCR, Camcorder and Audio.■Perfect ImageThe most advanced TFT-LCD panel is adapted to the unit. It removes thescreen flicker effect of Braun tube mode, which relieves eye fatigue to aconsiderable point and provides the user perfect images.■Profound and Rich Sound EffectUser can enjoy profound and rich sound without additional audio player thanksto the unit’s audio part with its sepecial speakers, which is of the best qualityamong the products of the same rank.8 9DCM-17WT Remote Control15Pin VGA Cable DC 12V Adapter Audio CableBatteries(AA×2)User’s Manual Power Cord
Connection 1.Power Connection•The present unit adjusts the voltage automatically.If you use 110V power, please connect the adapter convertible to 110V to ACcord before use.•Please check that the AC cord is plugged in correctly when you connect it toan outlet or DC adapter.2.Connection of Antennas•Make sure that the copper wire does not be bent if you use Round Leads (75-ohm)•Round Leads, Flat Twin Leads and antenna converter are separate purchasingitems.TV Parts 1. Power 10. S-Video In jack 2. Remote Control Sensor 11. Composite Video In jack3. Menu 12. Audio (L) In jack4. Input Mode 13. Audio(R) In jack5. CH Up/Down 14. Stereo Audio In jack6. Power indicator 15. Stereo Audio Out jack 7. Speaker 16. TV Antenna8. Power Input Connector9. PC Video Input10 11DCM-17WT 832 4 615 57 791 0 1 1 1 2 1 3 1 4 1 5 1 6Round LeadsFlat Twin LeadsAntenna ConverterTV Antenna
4.Connecting of Audio Line IN / OUT5.Connecting to PC3.Connecting of Composite Connector / S-Video connector•Connect a set of audio cables between the L, R AUDIO INPUT jacks on the TVand various players (VTR, DVD, Set Top Box, etc).•Make sure that all connectors are connected with same color of input andoutput.•S-Video outputs give you better images than Composite Video outputs.12 13DCM-17WT V i D E OLINE INRGBDisplay CardOutputAUDIOIntputLINE INLINE OUT Audio Output Audio InputA u d i o V i d e o S - V i d e oL - A U D I O - R S - V I D E O<Rear Connection Parts of the TV><Rear Connection Parts><PC or ExternalEquipment><Earphone / External Equipment’s><Rear Connectors> <PC Connectors><External Equipment’s Output>
3. Power On/Off•Turns the TV on and off 4. TV mode / Monitor mode•Power on and press TV button to enter theTV mode.•Power on and press PC button to enter thePC mode5. Change Input Source•If you want to change external input sourcewhile watching TV, please press the SELECTbutton on remote control. At each time youpress it, the signal will change as follows:PC -> TV -> Composite -> S-Video -> PC.6. How to use MENU •Press <MENU> button to enter main menu.Use <CH> button to select up and downmenu.•To move to sub-menu, press <MENU>button again or press <VOL> menu of rightside.Remote Control1. Buttons①POWER : Turns the LCD TV on and off②SELECT : Change input source③CHANNEL UP / DOWN : Change TV channel④MENU : MENU control⑤VOLUME UP / DOWN : Volume control⑥PC / TV : Change PC / TV signal⑦0 ~ 9 : Select TV channels directly⑧AUTO : Auto adjustment of PC Mode⑨ ‖: Pause⑩PIP : PIP select⑪MUTE : Silent of sound⑫ZOOM IN / OUT : Control screen size⑬▲▼◀ ▶: Change PIP position⑭SCAN : Auto TV channel selection⑮EXIT : Exit menu or functionThe remote control can be used up to about7m, 15o (R/L) from remote control sensor.2. Installing Batteries in the Remote Control1) Slide the cover out completely.2) Make sure to match the “ +/- ” Ends of the batteries with the diagraminside the compartment and install 2 batteries.3) Replace the cover.4) Battery : 2 x DC 1.5V AA typeBe sure to put the battery correctly in order to avoid all dangers includingblowout, water leakage or injury.For environmental protection, please dispose of dead batteries to their separatecollection can.14 15DCM-17WT
8. Changing TV Channel•If some channels are stored, you have onlystored channels to explore by pressingthese buttons. If you have not saved anychannel yet, you go through all thechannels with these buttons. For yourconvenience, it is recommended to storesome channels before use.•When you press <CH> buttons in TV Mode(including PIP mode), the TV changeschannels in sequence.•You can view any channel directly by usingnumber buttons on the remote control.•You can change TV channel in menu mode, too.9. Volume Control / MUTE•You can control volume when audio signal isconnected such as TV, PC and externalsignal.•Press to increase or decrease the volume.•The system volume can be controlled byOSD button. •Press < MUTE > button to cut off the soundtemporarily and press it again to revive thesound.10. Auto Adjustment of PC Mode•Press <AUTO> button of remote control toadjust the size of monitor screen andresolution to the best conditionsautomatically. •In sub-menu, use <CH> button to select upand down menu like main menu operation.•To control function of menu, use <VOL>button.•If you finished all controls of menu, press<MENU> button in sub-menu to enter mainmenu and then press <MENU> button againto exit menu control.•Or use <EXIT> button of the bottom ofremote control to finish current controllingmenu. 7. Memorizing TV Channels•To search TV channel, press <SCAN>button in TV mode. •TO stop searching TV channel and to storesearched TV channel, press <MENU>button.•TV channel memory function works onlyduring the airtime. If TV signal is veryweak, it is hard to search signals.•When the power is cut off or the unitsystem is reinitialized, all the recordedchannel information disappears. In thiscase, you need to record the channelsagain.•To erase searched TV channel, use channeledit function of menu mode✽Channels 2~69 are for “off-air”(antenna)and channels 1 and 14~69 are for cablechannels. Channels 14~69 are for bothantenna and cable channels. To select oneof them, use source menu of TV menu. 16 17DCM-17WT
Function ButtonFunction button work as follows1. : power and volume adjustment (rotary button)•This button turns on and off.•You can control the volume by turning this button.•You can choose the desired value of selected menu by turning the button.2. CH▲ / CH ▼: change of channel and menu•It changes TV channel.•It selects main/sub menu (up and down).3. MENU : Menu selection•You use the button to start or quit the menu mode.•You can enter sub-menu or return to main-menu section by this button.4. SOURCE : Selection among TV, PC monitor and other external inputs(Composite, S-Video)•By pressing the button, you can have PC monitor signal -> TV -> Compositesignal -> S-Video signal -> PC monitor signal in turn.11. Freezing the Picture•Press <II> button to freeze the picture andpress again to continue. 12. PIP function and changing the screensize•Press <PIP> button to create PIP screen.•Press < PIP > button to change the screensize. The size changes as following order(off->small-> middle->large)•PIP is only available in PC monitor mode.•PIP is available with TV mode and externalsignals (Composite, S-Video).•You can adjust PIP input signals in menumode.13. Changing the position of PIP•Use <direction-key> of remote control tochange the PIP position.•PIP position is also changeable in menumode.14. Changing the Screen Size•Use ZOOM <IN> button to magnify the sizeof the screen.•Use ZOOM <OUT> button to diminish thesize of the screen. •Changing screen size is done with thecentral part of the screen as base point. Youcan not make screen size smaller thanactual size. •To finish changing the screen size, press<EXIT> button.18 19DCM-17WT
■Advanced1) SharpnessThis adjusts the clarity and the focus of screen image.SHARP 1 -> 2 -> 3 -> 4 -> 5 SOFT2) GammaLinear : It shows gamma pattern of LCD TV type.CRT : It shows gamma pattern of CRT TV type.3) Color tempThis provides three preset color adjustments.Warm 5000-> 7300-> 9300 CoolUSER : User can adjust each of R, G, B.■OptionsTV MENU■Picture1) BrightnessThis controls the brightness of the LCD.2) ContrastThis controls the contrast of the LCD.3) ColorThis adjusts the depth of TV image color.4) TintThis adjusts the tint of TV image color.5) ImageThis adjusts the clarity and the focus of screen image.6) ScalingNormal : Image displayed in full screen.zoom2 : Image enlarged by 200% from the center of the screen.Anamorphic : Image displayed in panoramic view.Zoom : Image enlarged by 150% from the center of the screen.Fill aspect ratio : Image displayed with an aspect ratio 4:3Wide : lmage displayed with an aspect ratio 4:3 depending on the horizontalsize20 21DCM-17WT
5) Source You can select a source.PC -> TV -> Composite -> S-Video 6) Factory resetThis allows you to reset all the OSD control settings back to the factorysettings.For this, either press the VOL button of remote control or turn the OSDpower button to the right.■T V1) SourceIt selects a TV broadcasting signal (antenna / cable).2) ChannelYou can move through TV channels by this.3) Tune optionIt selects channel-tuning mode (manual/auto).4) Fine tuningWhen you chose manual tuning mode, fine tuning function works.5) Channel editIt adds new entries or deletes stored channels.You can edit channels either by pressing VOL button on the remote control orturning POWER button to the right..1) osdIt provides nine preset OSD positions.2) osd h / v posIt controls OSD position.3) osd timeoutUser can select the time up to 60 seconds.4) osd backgroundIt controls the color of OSD background.Opaque (gray), translucent (transparent)■Utilities1) LanguageUser can select OSD language.2) VolumeThis controls audio volume.3) Freeze frameThis pauses the image.4) Auto adjustThis adjusts the screen automatically to the best condition.You can do this by pressing the VOL button of remote control or by turningthe OSD power button to the right. 22 23DCM-17WT
PC Monitor Menu■Picture1) Brightness It controls the LCD brightness.2) ContrastIt controls the LCD contrast.3) h positionIt controls horizontal image position.4) v positionIt controls vertical image position. 5) phaseIt adjusts the focus, clarity and stability of image.6) clockIt adjusts the horizontal size of display.7) ScalingFill all : Image displayed in full screen regardless the resolution.Fill aspect ratio : Image displayed in full screen horizontally or vertically.One to one : Image displayed in original size as received from input.6) Channel searchThis searches and stores channels as remote control (SCAN button function).To search for channels, either press the < VOL > button on the right side ofthe remote control or turn the rotary button to the right.To stop channel search, press the < MENU > button on the remote control oron the function button.✽ 2Channels 2~69 are for “off-air”(antenna) and channels 1 and 14~69 arefor cable channels.Channels 14~69 are for both antenna and cable channels. To select one ofthem, use source menu of TV menu.7) Channel swapIt changes stored channel numbers at will.You can do this by either pressing the < VOL > button on the right side ofthe remote control or by turning the rotary button of function button to theright.After the Channel Swap window appears on the screen, you can change thecurrent channel number to a new one you want. You can select new channelnumbers to store by pressing the right < VOL > button on the remotecontrol. You can restore former state by pressing the left < VOL > button.8)TV systemIt selects TV broadcasting system of the area. KOREA / USA / JAPAN24 25DCM-17WT
✽PIP mode is available only in PC monitor mode. 1) SizeIt selects the PIP size.2) PosIt selects the PIP position.3) SOURCEIt selects the source of video signal.(1) Auto: It searches and selects automatically the signal currently beinginserted among Composite, S-video and TV signals. The priority isgiven in the following order: TV, Composite, S-Video.(2) Comp, S-video, TV : It selects manually Composite, S-Video and TVsignals. If the signal manually selected is feeble ordoes not exist, PIP screen cannot be displayednormally.✽Only when the PIP mode is “ON”, you can adjust brightness , contrast ,color, tint and sharpness.4) Brightness (of PIP screen)5) Contrast (of PIP screen)6) Color (of PIP scre7) Tint (of PIP screen)8) Sharpness (PIP screen) ✽The conditions of PIP screen such as brightness, contrast, color, and claritymay be somewhat inferior to those of normal screen.✽Use PIP TV menu if you need to control TV menu when monitor mode isPIP TV. ■Advanced1) SharpnessIt adjusts the clarity and the focus of screen image.SHARP 1 -> 2 -> 3 -> 4 -> 5 SOFT2) GammaLinear : It shows gamma pattern of LCD monitor type.CRT : It shows gamma pattern of CRT monitor type.3) color tempIt provides three preset color adjustments.Warm 5000-> 7300-> 9300 CoolUSER : User can adjust each of R,G,B.■PIP(Picture in Picture)26 27DCM-17WT
2) osd h / v posThis controls the position of OSD.3) osd timeoutYou can select the time up to 60 seconds.4) osd backgroundThis controls the color of OSD background.5) Opaque, translucentThis provides the current PC signal resolution and vertical frequency.■Utilities1) LanguageIt selects language of OSD menu.2) VolumeIt controls the volume of audio.3) Freeze frameIt pauses the image by selecting “ON”.4) Auto adjustIt adjust the screen to the best condition automatically.For this, press the VOL button of remote control or turn the power button ofOSD to the right.■Adv PIP✽You can control adv pip menu only when the PIP mode is “ON”.1) H PositionIt controls the horizontal PIP screen position. 2) V PositionIt controls the vertical PIP screen position. 3) Video typeIt adjusts PIP video input signal type.■Options1) osdThis provides nine preset OSD positions.28 29DCM-17WT
4) Fine tuningPlease change to manually to mathch the OSD description.5) VolumeControl volume of TV signal.✽Some points to keep in mind when using Menu✽You must check if all menus are adjusted properly before use.■Some point to keep in mind when using MenuYou must check if all menus are adjusted properly before use.1. TV ModeYou should verify :1) The TV Source (Antenna / Cable).2) That the TV area (TV system) is set as USA, KOREA or JAPAN.3) That TV channels are stored normally.4) That the image signal input is set as TV.5) Whether the Mute function is set or not.2. PC Monitor modeYou should verify:1) Resolution (1280*768 is the best setting).2) Vertical frequency (60 Hz is the best).3) That the image signal input is set as PC.<Note>✽If your PC does not support resolution 1280*768, please use it afterupgrading the PC graphic card to the newest driver. If your graphic cardcannot support resolution 1280*768 60Hz, please use your PC in theresolution 1024*768 or 1280*1024.5) SourceYou can select a source in the following order:PC -> TV -> Composite -> S-video 6) Factory resetThis allows you to reset all the OSD control settings back to the factorysettings.For this adjustment, press the VOL button of the right side of remote controlor turn the OSD power button to the right.■PIP TV1) SourceIt selects a TV broadcasting signals (antenna / cable).2) ChannelIt allows you to change TV channels.✽Channels between 2 and 69 are for “off-air”(antenna) and channel 1 as well as those between 14~69 are for cable channels.Channels between 14 and 69 are for both antenna and cable. To select oneof them, use the source menu of TV menu.3) Tune optionIt selects a channel search mode (manual/auto).30 31DCM-17WT
Specification1.SpecificationDesign and all specifications are subject to change without notice.Product Name 17”Wide TFT-LCD TVLCD Type a-Si TFT-LCDScreen Size 17” Wide (diagonal length)Pixel Pitch 0.291mm x 0.291mmContrast Ratio 400 : 1(Typ.)Luminance 450 cd/m2Active Display Area 372.48 mm (H) x 223.49 mm (V)Viewing Angle L/R:75°/75°, High/Low:50°/ 70°DInterface LVDSTV receiving channels VHF:Channels 2~13 UHF:Channels 14~69Cable : Channels 1, 14~125TV broadcasting systemNTSC-M modeAudio Output MAX 5W x 2 / StereoPC Monitor Horizontal Frequency 30 ~ 61 kHzVertical Frequency 56~ 85 HzColors 16.2M colors (6bit + FRC 2bit)Maximum Resolution WXGA : 1280(H) x 768(V)Other Resolution XGA, SVGA, VGAPower Supply Adapter Input AC 100V~240V, 50~60HzOutput DC 12VPower Consumption Maximum < 40WPower Saving/OFF < 5WPower Saving Mode VESA DPMS✽The present home appliance is certified and approved by EMC/EMI and canbe used in all places including residency area.SIZE ✽Weight : around 5.8kg (Net) / around 7.8kg (Gross) ✽The present unit can bend backward up to 15 degrees (Tilt Angel)32 33DCM-17WT <With stand> <With the stand folded>422mm382mm 338mm422mm262mm262mm180mm373mm 338mm47mm24mm96mm
Troubleshooting If the TV seems to have a problem, follow the list of possible problems andsolutions presented below. If none of these troubleshooting tips applies, callyour nearest service center.1. TV Troubleshooting•Poor picture or sound quality─Check all wire connections & adjust the antenna.─In the areas of poor TV reception conditions or of long distance from TVstations, you can have quality problems in the image and sound received.•No picture or sound─Make sure that the TV is plugged in and check the antenna connections.─Check its input source such as PC, TV, Composite, S-Video.•Screen with lines or unstable image─Check if there is an appliance in use disturbing electricwaves.(radiophone, hair drier, electric drill, etc.)─Do fine tuning by manual adjustment.•Unable to receive certain channels─Check if the channel is set correctly.─Redirect the antenna by moving it right and left.•Picture without sound─Press MUTE button─Control the volume 2. PC Monitor Troubleshooting•No image on the screen ─The VGA cable should be connected completely to the TV and computer.─The display card should be inserted fully in its slot.─Power switch of both PC and TV should be turned on.─Make sure that a supported mode has been selected on the display cardor system in use.─Modify the graphic card mode properly referring to the table of standardsignal modes presented in the previous page.─Check if VGA cable pin is not bent or took off.2.The Standard Signal Mode for PC Monitor If the signal from the system corresponds to the standard signal mode, thescreen is adjusted automatically. However, if the signal discords with it, thescreen may go blank with the power LED on or display <Out of Range> errormessage. Refer to the display card manual and adjust the screen as follows.Resolution Horizontal Vertical Clock Sync Polarity(H x V) Frequency(KHz) Frequency(Hz) Frequency(MHz) (H/V)640 x 480 3 1 . 4 6 9 5 9 . 9 4 2 5 . 1 7 5 - / -640 x 480 3 5 6 6 . 6 6 3 0 . 2 4 - / -640 x 480 3 7 . 8 6 1 7 2 . 8 0 9 3 1 . 5 - / -640 x 480 3 7 . 5 7 5 3 1 . 5 - / -720 x 400 3 1 . 4 6 9 7 0 . 0 8 7 2 8 . 3 2 2 - / +800 x 600 3 7 . 8 7 9 6 0 . 3 1 7 4 0 + / +800 x 600 4 8 . 0 7 7 7 2 . 1 8 8 5 0 + / +800 x 600 4 6 . 8 7 5 7 5 4 9 . 5 + / +1024 x 768 4 8 . 3 6 3 6 0 . 0 0 4 6 5 - / -1024 x 768 5 6 . 4 7 6 7 0 . 0 6 9 7 5 - / -1024 x 768 6 0 . 0 2 3 7 5 . 0 2 9 7 8 . 7 5 + / +1280 x 768(the best) 4 7 . 7 1 2 6 0 . 0 1 5 8 0 . 1 3 6 - / +✽The table of standard signal modes presented above shows only primary modesuitable for each resolution level concerned. In most of the cases, theresolution degrees up to WXGA (1280*768), whether they are included in thetable or not, are adjusted automatically to their best suitable signal modewithout additional adjustment by PC graphic card. If the resolution is notadjusted automatically, please set graphic card’s output mode to signal mode.✽If your PC graphic card does not support resolution 1280*768, please reinstallit by downloading the newest driver from graphic card manufacturer andsetting it to resolution 1280*768, vertical frequency 60Hz, color 16 or 24 bites.✽The present unit has Plug and Play function. The computer perceives themonitors as “Basic Monitor”, “Plug and Play Monitor” or “LCD Monitor”.34 35DCM-17WT
Concerning services For the product’s functional trouble occurred in use, client can benefit from thewarranty during one year from the date of purchase. However, all services forthe troubles caused by client’s erroneous use or by natural calamity will becharged even during the term of warranty validity.Situations of charged services (client’s responsibility to pay)All services will be charged even during the term of warranty validity ifrequested in the situations as below1. The product went out of order because you had put foreign objects (water,liquor, coffee, etc.).2. The product is damaged or out of order because you dropped it or the unitwas exposed to a shock. 3. The product’s external cover is harmed or degraded by organic substancessuch as thinner or benzene.4. Some accessories are lost or damaged due to the client’s voluntarydisassembly of the product. 5. The product fell out of order due to the accessories used other than thosesupplied by manufacturer. (adapter, etc.)6. The product fell into trouble due to the wrong voltage applied.7. The product fell out of order after being serviced by someone other than ourclient service staff.8. Natural calamity (thunderbolt, fire, storm, flood, gas, sea wind, earthquake,etc.) caused trouble to the product.9. User did not respect the present instructions manual and caused trouble tothe product.10. The product has trouble due to client’s other faults.11. If the purchase date cannot be recognized, we count the quality guaranteeterm from the first day of the third month after the date of manufacture.•Unable to turn on the equipment─Check if the AC cord is plugged in correctly and retry to turn on the unit.─Plug the monitor AC cord off the power socket. Connect the AC cordagain in 10~20 minutes.•LED on TV is red flickering without image─Check if the VGA cable is connected to the TV and computer correctly.─Check if the computer is in power-saving mode by touching the keyboardor mouse.•Image is unstable and out of focus─Check if the VGA cable is connected to the computer correctly.─You need to readjust the image when computer display mode changes.Please readjust the image by using Auto setting or adjustment menu.─Check if the monitor and graphic card are compatible and if they are setat the proper refresh rate. If the characters appear distorted, pleasereset the refresh rate to 60Hz.•Image size is strange─Please reset the image size using vertical and horizontal positions funtionof screen adjustment menu.─Please try Auto Adjust function.36 37DCM-17WT
162 mm92 mmThe places of nails to install the unit on the wallThe head size of nail or screw : 3.7mm ~ 4.5mmThe thickness of nail or screw : less than 2.6mmFixing holeFixing holeFixing hole

Navigation menu