Digi XSTICK2 XStick ZNet 2.5 User Manual XStick ZNet 2 5 Certifications Card

Digi International Inc XStick ZNet 2.5 XStick ZNet 2 5 Certifications Card

Contents

User Manual Addendum

This equipment has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 Subpart B, of the FCC Rules. These limits are designedto provide reasonable protection againstharmful interference in a residentialenvironment. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instruction manual, maycause harmful interference to radiocommunications. However, there is noguarantee that interference will not occur in aparticular installation. If this equipment doescause harmful interference to radio ortelevision reception, which can be determinedby turning the equipment off and on, the useris encouraged to try and correct theinterference by one or more of the followingmeasures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and the receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Modifications (FCC 15.21)Changes or modifications to this equipmentnot expressly approved by Digi may void theuser's authority to operate this equipment.Industry CanadaDeclaration of Conformity(in accordance with FCC Dockets 96-208 and 95-19)Manufacturer's Name: Digi InternationalCorporateHeadquarters: 11001 Bren Road EastMinnetonka MN 55343Manufacturing 10000 West 76th Street,Headquarters: Eden Prairie MN 55344FCC Part 15 Class BRadio Frequency Interference (RFI) (FCC 15.105)Labeling Requirements (FCC 15.19) This device complies with Part 15 of FCC rules.Operation is subject to the following twoconditions:FCC Part 15 Class BRadio Frequency Interference (RFI) (FCC 15.105)Declaration of Conformity(in accordance with FCC Dockets 96-208 and 95-19)Manufacturer's Name: Digi InternationalCorporateHeadquarters: 11001 Bren Road EastMinnetonka MN 55343Manufacturing 10000 West 76th Street,Headquarters: Eden Prairie MN 55344PN:(1P)A90000935-88PN:(1P)A90000935-88Digi International declares, that the product:Product Name:XStick ZNet 2.5 50001547-xxto which this declaration relates, meets the requirements specified by the Federal Communications Commission as detailed inthe following specifications: - Part 15, Subpart B, for Class B Equipment- FCC Docket 96-208 as it applies to Class B- Personal computers and peripherals The product listed above has been tested at an External Test Laboratory certified perFCC rules and has been found to meet theFCC, Part 15, Class B, Emission Limits.Documentation is on file and available from theDigi International Homologation Department.International EMC Standards This product meets the followingelectromagnetic emissions standards: - AS/NZS CISPR 22- VCCI- ICES-003- EN 55022- EN 55024Safety Standards - UL/CUL 60950-1 - IEC/EN 60950-1- CSAThis product meets the following safety standards:Certifications and Agency Approvals - United States (FCC Part 15.247): FCC ID: MCQ-XSTICK2- Industry Canada (IC): IC: 1846A-XSTICK2- Europe (CE): ETSIThis Class B digital apparatus complies with Canada ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.-ICES-003 Annex.Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.This equipment has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 Subpart B, of the FCC Rules. These limits are designedto provide reasonable protection againstharmful interference in a residentialenvironment. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instruction manual, maycause harmful interference to radiocommunications. However, there is noguarantee that interference will not occur in aparticular installation. If this equipment doescause harmful interference to radio ortelevision reception, which can be determinedby turning the equipment off and on, the useris encouraged to try and correct theinterference by one or more of the followingmeasures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and the receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Modifications (FCC 15.21)Changes or modifications to this equipmentnot expressly approved by Digi may void theuser's authority to operate this equipment.Industry CanadaLabeling Requirements (FCC 15.19) This device complies with Part 15 of FCC rules.Operation is subject to the following twoconditions:This Class B digital apparatus complies with Canada ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.-ICES-003 Annex.Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Digi International declares, that the product:Product Name:XStick ZNet 2.5 50001547-xxto which this declaration relates, meets the requirements specified by the Federal Communications Commission as detailed inthe following specifications: - Part 15, Subpart B, for Class B Equipment- FCC Docket 96-208 as it applies to Class B- Personal computers and peripherals The product listed above has been tested at an External Test Laboratory certified perFCC rules and has been found to meet theFCC, Part 15, Class B, Emission Limits.Documentation is on file and available from theDigi International Homologation Department.International EMC Standards This product meets the followingelectromagnetic emissions standards: - AS/NZS CISPR 22- VCCI- ICES-003- EN 55022- EN 55024Safety Standards - UL/CUL 60950-1 - IEC/EN 60950-1- CSAThis product meets the following safety standards:Certifications and Agency Approvals - United States (FCC Part 15.247): FCC ID: MCQ-XSTICK2- Industry Canada (IC): IC: 1846A-XSTICK2- Europe (CE): ETSI

Navigation menu