Diasonic Technology Co RVM-804 TOUCH SCREEN VEHICLE MONITOR User Manual

Diasonic Technology Co Ltd TOUCH SCREEN VEHICLE MONITOR

User Manual

http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0078 EMC compliance Ltd. Page: 1 of 1 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. Appendix 6. User manual
Rearview MonitorModel : RVM-804Table of ContentsUSER MANUAL( Ver 1.0)Table of Contents1. Caution2. Components of the product 3. How to use the product4. How to install the product5. Product Specification6. Warranty statements• Thank you for purchasing our touchscreen vehicle monitor.• Please read this manual before you use the product.• The product may be different than described in the manual;depending on renewal and/or upgrade of S/W version andperformance it can be altered without notice.pHome page:Product inquiry:
1. Caution●For your safe operation please read this manual before you start●For your safe operation, please read this manual before you startto use the product. We inform you that our company shall not beresponsible for failures and troubles that are occurred due tomisuse or neglect of the cautions written on this manual.● Operating this equipment when driving a vehicle might cause an. accident. Use the equipment after parking or stopping the vehiclein a safe area.● When wiping off the dust, use a soft fabric instead of liquidsolvents (thinner, benzene etc.) solution or a wet rag.● Do not press the liquid crystal screen hard. It might be damagedby hard pressure.● Do not drop or give shock. It might cause breakdown or damage. ●Do not dismantle the product arbitrarily We do not supply free●Do not dismantle the product arbitrarily. We do not supply freeafter service for an arbitrarily dismantled product. ● Touching the power with a wet hand causes electric shock.Caution required.● For accessories or cables to connect with the product, it isrecommended to use proper goods from our company. We arenot responsible for any problems caused by wrong articles.● Do not disconnect the power cable during using the product.It might cause damage to the productIt might cause damage to the product.● Please conform the failure of the User’s Guide and precautions,If a fault occurs in the operations.# Amplified explanation is as follows.●Cti Thi tif httk i id d td●Caution: This part inform what to keep in mind or understandand what caution is required to use the product.● Ref(reference): Reference is about functional explanation.
2.Components of the product①①②③①Touch Screen②③● By touching one of the small picture during multi screen mode, the concerning small picture will be enlarged into full screen mode.● By touching the screen it is possible to control the equipment orto change the settings. ②Power On/Off● Press the power button for 0.5 seconds to turn on the screen.● Press the power button for 0.5 seconds to turn on the screen pwhen it is turned on.③illuminance sensor● Behind this window a sensor detects the actual light conditions inthe area around the screen. When activated via the menu settings,this sensor automatically controls the brightness of the screen.(Day/Night control)
④⑤⑥⑦④ Bluetooth phone menu On/Off● Bluetooth phone menu screen appears when you touch the button.⑤ LCD Display On/Off● Lcd screen appears when you touch the button.⑥Split Screen●A split screen appears●A split screen appears.⑦ Menu Button● The main menu appears.
Rear Panel③①④①Power Input②④①Power Input● Connect the power cable. ( VCC/GND/TRG1~TRG5/Speed SW )②Camera Input②Camera Input● Connect the camera cable. ( Cam1 ~ Cam4 )③AUX In③AUX In● AUX in 2 port ④Ext. MIC / Speakerp● Connect an external mic and speake..
Components● Please check that you have the correct contents before using thisProduct.● If any items are missing, please contact your dealer.Top Case Bottom CasePower + Camera CableManual
3. How to use the product● When the booting is ready, the multi screen as below will be displayedStart screenWhen the small window is When the small window is touched, it is enlarged.touched, it is enlarged.● When the small window on the multi screen are touched, the channel is enlarged into full screen mode. One more touchreturns it back to the multi screen mode.● : Adjust the volume of the speaker.● : Setting menu..
Volume Control● Press the button to display volume Pop-up.②③②③①①① Press the button to mute.② Press the button to increase the volume.③Press the button to decrease the volume③Press the button to decrease the volume.
Multi screen●P th lti b tt t di id th●Press the multi screen button to divide the screen.①②③④Press multi screenButton once:Press multi screenButton 3 times: Cam1234③④Button once: Cam1,Cam2Cam1,2,3,4①② ③④Press multi screen button twice: C3C4Cam3,Cam4
Setting Mode●P th tti b tt t th tti●Press the setting menu button to open the setting screen.● CAM : Adjust brightness of Camera input screen●AUX : Adjust brightness of AUX screen●AUX Adjust brightness of AUX screen
DisplayInput the name into each channel.● Mirror : Mirror image or normal image● Reverse : Mirror image or reverse image● Shutter : Enable to operate Shutter/Heater Camera
DisplaySetup screen position of each channel※ Caution: Cam1and AUX1 cannot be setup at the same time.Setup the screen on each trigger.
DisplayDi l th f ll di t hDisplay the full screen according to eachChannel setup when setting up OnDisplay the dividing lines of the screenDisplay the dividing lines of the screen
DisplayAdjust Parking line of each Trigger.Trig 1Front & RearCalibrationTrig.1Front & RearCalibration
FunctionTh i t d O t ti llThe screen is turned On automaticallyWhen starting the vehicle전원 Off 전의 화면Mode로 On됩니다.Automatic brightness adjustment by sensorin the front housingSensitivity of automatic brightness adjustment, level 0 to 10 controlled by actual light conditions (Day/Night)
FunctionKeep Trigger activated during setup time afterKeep Trigger activated during setup time after Trigger off in order to bridge temporary powerloss,e.g. from vehicle’s turnlight signalRe-adjust center Point of Touch panelSTEP 1 of 3Click on center of '+' iconfor Touch screen calibration.
FunctionDetect speed of a vehicle from 10 to 200HzTo switch automatically into the screen ON To switch automatically into the screen ONmode, by detecting a speed signal (tacho signal)
SystemSet time displaying the Menu screen.Set time displayed on the screenSet time displayed on the screen.설정시간 동안 Touch등 Key 입력이 없으면 화면이 꺼집니다.
SystemSet a password to lock the Menu button.Support languages for each country. ( Option )
SystemInitializing set points of MenuDisplay Firmware Version and Model name
Bluetooth Phone ● Press the button to start Bluetooth.Screen of Bluetooth startStart-up screen displays the Phone Book list of phone paired.: Displays call lists during absence.:Di l h llli t i d: Displays phone call lists received.: Displays phone call lists sent.: Use for making a call dialing numbers.: Displays a Phonebook list.: Setup of Bluetooth.: Finishes Bluetooth.
Bluetooth Phone ● Enter the Pairing Mode for Paring with Bluetooth by pressingthe button1. Pairing mode is set by pressing the button.2. Connect Bluetooth to a cell phone you want searching Bluetoothdevice.(Enter the Pin code depending on type of cell phones)device.(Enter the Pin code depending on type of cell phones)3. Message is displayed when it is connected as below.4Returntothestartup screen of Bluetooth by pressing4. Return to the start-up screen of Bluetooth by pressing the button.
Bluetooth Phone ●:Displays devices Paired.* Display devices paired up to 8 devices•Displays devices paired•Deletes devices connected by the button•Connects devices by pressing the button•Deletes all devices by pressing the button< Devices paired are connected automatically in order >
Bluetooth Phone ● :Connection automatically when receiving a call● :Incoming call automatically after a set timewhen receiving a call from the set on the state.•Name : Phone on display during Pairing is the name of thatinstrument.•Address : Bluetooth Address.•Bluetooth Soft ware Version is displayed.
Bluetooth Phone ● Down load phonebook list after pairing succeed.•Call after press the number in the list.
4. Installation
6.Specification- LCD : Built in 8“ TFT LCD (WVGA 800x480, with Touch Panel)- Camera : 4Ch input (1 Vp-p, 75Ω) /NTSC, PAL ( Video & Audio )- Audio Output 1Chp- AUX1, AUX2 - Trigger 5 input (Cable Input : 12 ~ 24V)- ALS Sensor (Night & Daytime Brightness detection)- Power : 12~24Vdc (12Vdc 1.3A)- Operating Temp. : -20’C ~ 55’C- Storage Temp. : -30’C ~ 85’C- Dimensions (W x H x D) : 218mm x 150mm x 59mm- Weight : 약 1775g

Navigation menu