Delta Networks EASYWIFI WiFi Router for EasyST User Manual EasyWiFi

Delta Networks, Inc. WiFi Router for EasyST EasyWiFi

Users Manual

IP-based Broadband Wireless Access (BWA) System EasyWiFi WiFi Extension Module for the EasyST Unit Hardware Installation Guide The Innovation Behind Broadband Wireless Connecting the World
Revision Record: EasyWiFi Pub. No. Date Update Description 01 Dec-05 First edition. Author: MD 02 03-06 Additional Input: Author: MF Publication No. : 18120511-01 © Copyright by Airspan Networks Inc., 2005. All rights reserved worldwide. The information contained in this document is proprietary and is subject to all relevant copyright, patent and other laws protecting intellectual property, as well as any specific agreement protecting Airspan Networks Inc. rights in the aforesaid information. Neither this document nor the information contained herein may be published, reproduced or disclosed to third parties, in whole or in part, without the express, prior, written permission of Airspan Networks Inc. In addition, any use of this document or the information contained herein for any purposes other than those for which it was disclosed is strictly forbidden. Airspan Networks Inc. reserves the right, without prior notice or liability, to make changes in equipment design or specifications. Information supplied by Airspan Networks Inc. is believed to be accurate and reliable. However, no responsibility is assumed by Airspan Networks Inc. for the use thereof nor for the rights of third parties which may be effected in any way by the use thereof. Any representation(s) in this document concerning performance of Airspan Networks Inc. product(s) are for informational purposes only and are not warranties of future performance, either express or implied. Airspan Networks Inc. standard limited warranty, stated in its sales contract or order confirmation form, is the only warranty offered by Airspan Networks Inc. in relation thereto. This document may contain flaws, omissions or typesetting errors; no warranty is granted nor liability assumed in relation thereto unless specifically undertaken in Airspan Networks Inc. sales contract or order confirmation. Information contained herein is periodically updated and changes will be incorporated into subsequent editions. If you have encountered an error, please notify Airspan Networks Inc. All specifications are subject to change without prior notice. Headquarters: Airspan Networks Inc. 777 Yamato Road Suite 105 Boca Raton, FL 33431 USA Tel: (+1) 561 893 8670 Fax: (+1) 561 893 8671 Main Operations: Airspan Communications Ltd. Cambridge House Oxford Road Uxbridge Middlesex UB8 1UN United Kingdom Tel: (+44) 1895 467 100 Web site: www.airspan.com
EasyWiFi
This page is intentionally left blank.
EasyWiFi Contents 18120511-01 Airspan Networks Inc. i Contents About this Guide.................................................................................................... iii 1. Introduction .............................................................................................. 1-1 2. Physical Description................................................................................ 2-1 2.1. Physical Dimensions ........................................................................... 2-1 2.2. Ports.................................................................................................... 2-2 2.3. WiFi Antenna....................................................................................... 2-4 2.4. Mounting Parts .................................................................................... 2-5 2.5. LEDs ................................................................................................... 2-6 3. Attaching EasyST..................................................................................... 3-1 4. Connecting to LAN................................................................................... 4-1 5. Mounting ................................................................................................... 5-1 5.1. Desktop Mounting ............................................................................... 5-2 5.2. Wall Mounting...................................................................................... 5-3 6. Connecting Power.................................................................................... 6-1 6.1. Changing the AC/DC Power Adapter's Prongs ................................... 6-2 6.2. Connecting AC/DC Power Adapter ..................................................... 6-3 7. Resetting EasyWiFi.................................................................................. 7-1 A. FCC Interference Statement....................................................................A-1 B. Glossary....................................................................................................B-1 C. EasyWiFi Specifications..........................................................................C-1 D. Power Adapter Specifications.................................................................D-1
EasyWiFi Contents 18120511-01 Airspan Networks Inc. ii This page is intentionally left blank.
18120511-01 Airspan Networks Inc. iii About this Guide This chapter describes the purpose, targeted audience, referenced documentation, and typographical conventions of this document. Purpose This guide provides a description of the EasyWiFi extension module as well as instructions for installing the module. Targeted Audience This guide is intended for the end-user installing the EasyWiFi extension module for the EasyST. This device requires no professional installation. Typographical Conventions This guide uses the following typographical conventions: Convention Meaning Example Bold Command, menu, icon, button, and field Click the Next button. "To" in bold face and at the beginning of a sentence Introduces a numbered procedure To download a SW file: Warning that provides information that can prevent and avoid bodily or mechanical harm -- Note that provides useful information --
EasyWiFi Contents 18120511-01 Airspan Networks Inc. iv Customer Service For service and support for your EasyWiFi, contact your regional Airspan representative or Airspan's Technical Assistance Center (TAC) at:  Web site (Support Request Form): http://www.airspan.com/Ultra/ContactForm/airspansupportform.asp  Americas: (+1)-561-893-8679  International: (+44)-1895-467 467
18120511-01 Airspan Networks Inc. 1 Introduction The EasyWiFi extension module allows you to add extra functionality to your EasyST unit:  WiFi capabilities based on 802.11b and 802.11g  Four Ethernet LAN switches (10/100BaseT)  DC power The EasyST is easily plugged onto the EasyWiFi extension module by means of a 30-pin IDC connector. The EasyWiFi is powered by an AC/DC adapter that is plugged directly into a standard electrical wall outlet (110/220 VAC). In addition, the adapter's plug prongs can be easily removed, and then replaced to suite electrical sockets of the country in which the unit is being installed. 1
EasyWiFi Introduction 18120511-01 Airspan Networks Inc. 1-2 This page is intentionally left blank.
18120511-01 Airspan Networks Inc. 1 Physical Description This chapter provides a physical description of the EasyWiFi extenson module. 2.1. Physical Dimensions The physical dimensions of the EasyWiFi are listed in the table below: Table 2-1: EasyWiFi physical dimensions Parameter Value Dimensions (height x width x length) 30 x 125 x 125 mm Weight 210 grams 2
EasyWiFi Physical Description 18120511-01 Airspan Networks Inc. 2-2 2.2. Ports The EasyWiFi provides various ports on its side panel, as described in the table below: Table 2-2: Easy WiFi port descriptions Port Label Interface 8-pin RJ-45 (x four) lan1, lan2, lan3, lan4 10/100BaseT Ethernet LAN DC power jack power 6 VDC power (supplied by AC/DC power adapter) Reset button reset Resets configuration settings to factory default 30-pin IDC socket -- Interfaces with EasyST, providing: • 802.11 Wi-Fi • LAN switches • DC power (Note: IDC socket accepts flat cables)
EasyWiFi Physical Description 18120511-01 Airspan Networks Inc. 2-3 Figure 2-1 display the EasyWiFi ports. Figure 2-1: EasyWiFi ports (side and top panels)
EasyWiFi Physical Description 18120511-01 Airspan Networks Inc. 2-4 2.3. WiFi Antenna The EasyWiFi provides an integral WiFi antenna located on its side panel that can be orientated in the vertical pane, from 0° (i.e. antenna closed) to 180°. Two positions are used: 90° when EasyWiFi mounted horizontally; and 180° when EasyWiFi mounted vertically on a wall. Figure 2-2: EasyWiFi integral WiFi antenna
EasyWiFi Physical Description 18120511-01 Airspan Networks Inc. 2-5 2.4. Mounting Parts The EasyWiFi unit provides built-in wall-mounting brackets, desktop-mounting feet, as well as locking latches for mounting (attaching) the EasyST to the EasyWiFi extension module. Figure 2-3: EasyWiFi mounting parts (bottom panel)
EasyWiFi Physical Description 18120511-01 Airspan Networks Inc. 2-6 2.5. LEDs The EasyWiFi provides LEDs for indicating the status of various operations. These LEDs are located on the top panel for easy viewing, as shown in the figure below: Figure 2-4: EasyWiFi LEDs (top panel)
EasyWiFi Physical Description 18120511-01 Airspan Networks Inc. 2-7 The EasyWiFi LEDs are described in the table below: Table 2-3: EasyWiFi LED descriptions LED Color Status Description On Unit receiving power Flashing Unit is booting up power Red Off No power On WiFi link with one user or more Flashing Active WiFi link (i.e. data transfer) wlan Green Off No WiFi link On Link (EasyST and EasyWiFi) is active Activity in 10Mbps - Blinks at 3Hz Flashing Activity in 100Mbps – Blinks at 12 Hz wan Green Off EasyST is not connected On 10/100BaseT network device (e.g. PC) is on Flashing Active LAN link (i.e. traffic flow) lan1, lan2, lan3, lan4 Green Off No 10/100BaseT interface connected to port
EasyWiFi Physical Description 18120511-01 Airspan Networks Inc. 2-8 This page is intentionally left blank.
18120511-01 Airspan Networks Inc. 1 Attaching EasyST The EasyWiFi interfaces with the EasyST by means of a 30-pin connector, located on the EasyWiFi's top panel. For securing the connection of the EasyST to the EasyWiFi, the EasyWiFi provides two latches that locks and unlocks the EasyST from the EasyWiFi. The latches are located on the EasyWiFi's bottom and side panels. Figure 3-1: EasyST attached to EasyWiFi 3
EasyWiFi Attaching EasyST 18120511-01 Airspan Networks Inc. 3-2 To attach the EasyST to the EasyWiFi: 1. Align the EasyST with the EasyWiFi by aligning the following:  EasyST 30-pin female connector with EasyWiFi's 30-pin male connector  EasyST RJ-45 port with EasyWiFi RJ-45 port labeled lan2 2. Press the EasyST firmly onto the EasyWiFi so that the 30-pin connectors contact and plug into one another. Figure 3-2: Aligning EasyST with EasyWiFi
EasyWiFi Attaching EasyST 18120511-01 Airspan Networks Inc. 3-3 3. Lock the EasyST to the EasyWiFi using the two latches: a. On the bottom panel, use your thumb to push the latch towards the locking direction (indicated by the "lock" label). b. On the bottom-side panel, use a tool with a pointed edge to move the latch into the EasyST's mounting bracket by inserting the pointed egde into the latch's hole, and then dragging the latch into the EasyST's mounting bracket until it is firmly in place. Figure 3-3: EasyWiFi latches (unlock position)
EasyWiFi Attaching EasyST 18120511-01 Airspan Networks Inc. 3-4 Figure 3-4: EasyWiFi latches (lock position)
18120511-01 Airspan Networks Inc. 1 Connecting to LAN EasyWiFi provides four 8-pin RJ-45 ports for 10/100BaseT (Fast Ethernet) interface with the subscriber's network. These LAN ports are located on the back panel and labeled lan1, lan2, lan3, and lan4. The LAN ports support Half and Full duplexing mode, Auto-Negotiation, and Auto-MDIX. The EasyWiFi-to-computer cable setup is listed below:  Cable: straight-through CAT 5 STP Ethernet cable  Connector: 8-pin RJ-45 at both ends  Connector pinouts: Pin Function 1 Tx+ 2 Tx- 3 Rx+ 6 Rx- To connect EasyWiFi LAN ports to the subscriber's Ethernet network: 1. Plug the Category 5 Ethernet cable into the desired EasyWiFi 8-pin RJ-45 port. 2. Plug the other end of the Category 5 Ethernet cable into your computer's LAN port located at the back of your computer. 4
EasyWiFi Connecting to LAN 18120511-01 Airspan Networks Inc. 4-2 The figures below illustrate the EasyWiFi-to-computer cable connection: Figure 4-1: Connecting EasyWiFi to subscriber's LAN
18120511-01 Airspan Networks Inc. 1 Mounting Warning: The EasyWiFi is an indoor unit and therefore, must be mounted indoors. Warning: To prevent a fire hazard caused by overheating, do not place theEasyWiFi on a carpeted surface where airflow is restricted. EasyWiFi is a self-installable indoor unit, requiring no professional installation by a technician. EasyWiFi must be mounted indoors in a location that provides the following:  High quality RF reception with the Internet service provider (i.e. base station)  Accessibility to subscriber's power supply and LAN network with regards to cable lengths  Strong radio signal strength for the WiFi communication link between EasyWiFi and the subscriber's WiFi computer EasyWiFi can be mounted in the following ways, depending on the EasyST's antenna configuration:  EasyST with clip-on antenna: mounted horizontally on a desktop  EasyST with window-mount external antenna:  Mounted horizontally on a desktop  Mounted vertically on a wall 5
EasyWiFi Mounting 18120511-01 Airspan Networks Inc. 5-2 5.1. Desktop Mounting The EasyWiFi offers quick-and-easy mounting by allowing you to simply place it horizontally on a desktop (as shown in the figure below). The EasyWiFi contains integrated rubber feet (pads) on its bottom panel, providing cushioning as well as insulation from static electricity. Figure 5-1: Desktop mounting EasyWiFi
EasyWiFi Mounting 18120511-01 Airspan Networks Inc. 5-3 5.2. Wall Mounting When EasyST implements the window-mount, external antenna (i.e. no clip-on antenna), the EasyWiFi can be mounted either on a desk (i.e. desktop mounting) or a wall. The figure below shows a wall-mounted EasyWiFi. The EasyST is connected to an RF cable that connects to the external antenna (i.e. clip-on antenna is removed). For mounting to a wall, the EasyWiFi provides two mounting hooks molded into its bottom panel, as shown below: Figure 5-2: Wall-mounted EasyWiFi Note: The EasyWiFi's WiFi antenna must be fully extended (i.e. 180 degrees) when wall mounted.
EasyWiFi Mounting 18120511-01 Airspan Networks Inc. 5-4 To wall mount the EasyWiFi: 1. On the wall, mark the position with a pencil where you want to drill the two holes for the screws onto which the two EasyWiFi mounting hooks will later by guided. The distance between the two wall-mounting hooks (from their centers) is approxiamtely 83 mm (3.27 inches). Ensure that the holes are aligned and level using a spirit level. 2. Drill holes for each hole that you marked in the step above using a no. 6 twist-drill bit. 3. Tap the 6-mm wall anchors (supplied) into each of the drilled holes.
EasyWiFi Mounting 18120511-01 Airspan Networks Inc. 5-5 4. Drive the two 0.75-inch screws (supplied) into the wall anchors. Ensure that at least 0.08-inch gap is exposed between the screw head and the wall anchor to allow insertion into the EasyWiFi mounting hooks. 5. Align the screws with the entrance to the two EasyWiFi mounting hooks, and then pull down the EasyWiFi to lock the screws into the mounting hooks. Figure 5-3: Inserting screws into wall mounting hooks
EasyWiFi Mounting 18120511-01 Airspan Networks Inc. 5-6 This page is intentionally left blank.
18120511-01 Airspan Networks Inc. 1 Connecting Power EasyWiFi is powered by an AC/DC power supply adapter, supplying 6 VDC and 4 Amperes. The AC/DC adapter is plugged into a standard electrical wall outlet (110/240 VAC; 50/60 Hz). The power adapter also provides interchangeable prongs (e.g. American vs. European) that can be replaced to suit country electrical standards in which the EasyWiFi is being installed. To view the AC/DC power adapter specifications, see Appendix C, "Power Adapter Specifications". Note: Any AC/DC power adapter complying with Class 2 and LPS, and safety approved according to national regulations, and that provides rated input of 100-240 V, 50/60 Hz, 0.4 A and output of 6 V, 4 A DC, may be used for powering the EasyWiFi. 6
EasyWiFi Connecting Power 18120511-01 Airspan Networks Inc. 6-2 6.1. Changing the AC/DC Power Adapter's Prongs The AC/DC power adapter provides interchangeable prongs to suit electrical wall outlet sockets in the country in which the EasyWiFi is being installed. To change the plug prongs: 1. Remove the prongs by first moving (with the help of a pen) the LOCK/OPEN switch to OPEN position, and then gently sliding the prongs upwards, away from the power cord. 2. Align the desired prongs with the adapter's prong groove, and then slide the prongs onto the adapter in the orientation as shown in the Figure 6-1. Ensure that the prongs reach the end of the prong groove. Figure 6-1: Replacing AC/DC power adapter plug prongs 3. Secure the prong in place by moving (with the help of a pen) the LOCK/OPEN switch to LOCK position.
EasyWiFi Connecting Power 18120511-01 Airspan Networks Inc. 6-3 6.2. Connecting AC/DC Power Adapter Once you have attached the plug prongs suitable to your country's electrical wall socket, you are ready to connect the EasyWiFi to the electrical wall outlet. To connect the EasyWiFi to the power supply: 1. Before plugging the power cord into the electrical wall outlet, plug the AC/DC power adapter's power cable (i.e. DC power jack) into the EasyWiFi's DC power socket (labeled power). 2. Plug the prongs of the AC/DC power adapter into the electrical wall outlet. Figure 6-2: Connecting DC power to EasyWiFi
EasyWiFi Connecting Power 18120511-01 Airspan Networks Inc. 6-4 This page is intentionally left blank.
18120511-01 Airspan Networks Inc. 1 Resetting EasyWiFi The EasyWiFi provides a button that enables you to reboot the EasyWiFi as well as reset the EasyWiFi settings to default. This button is located on the EasyWiFi's back panel and labeled reset. To reboot or reset to default the EasyWiFi: 1. Using a tool with a pointed edge, insert the edge into the hole labeled reset (located on the back panel next to the DC power jack). Figure 7-1: Resetting EasyWiFi to default using reset button 7
EasyWiFi Resetting EasyWiFi 18120511-01 Airspan Networks Inc. 7-2 2. Push the the tool into the hole until you feel a button being pushed.  To reboot the EasyWiFi: push the button once and then remove the tool  To reset the EasyWiFi to default settings: keep the button pressed for at least 7 seconds
18120511-01 Airspan Networks Inc. A-1 FCC Interference Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: A
EasyWiFi FCC Interference Statement 18120511-01 Airspan Networks Inc. A-2 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
18120511-01 Airspan Networks Inc. B-1 Glossary BS Base station BWA Broadband wireless access dB Decibel dBm Power ratio in dB (decibel) of the measured power referenced to one milliwatt FTP File Transfer Protocol GHz Gigahertz. One GHz represents 1 billion cycles per second GW Gateway HTTP HyperText Transfer Protocol Hz Hertz IP Internet protocol ISP Internet Service Provider LAN Local-Area Network MAC The next layer up from the PHY, known as the media access controller Mbps Megabits per second (one million bits per second) MHz Megahertz (one million cycles per second) MIB Management information base ODU Outdoor unit associated with an ST QAM Quadrature amplitude modulation QoS Quality of service, which is used to specify level of data throughput B
EasyWiFi Glossary 18120511-01 Airspan Networks Inc. B-2 RF Radio frequency Rx Receive SNMP Simple network management protocol SNR Signal-to-noise ratio ST Subscriber terminal (interchangeable with CPE) SW Software Tx Transmit VoIP Voice over Internet protocol WiFi Wireless Fidelity WiMAX WiMAX is a wireless industry coalition whose members are organized to advance IEEE 802.16 standards for broadband wireless access (BWA) networks
18120511-01 Airspan Networks Inc. C-1 EasyWiFi Specifications The EasyWiFi specifications are listed in the table below: Table B-1: EasyWiFi specifications Parameter Value Frequency operation 2412-2472 MHz Wireless modulation • (IEEE802.11g) Orthogonal Frequency Divisional Multiplexing (OFDM) • (IEEE802.11b) Direct Sequence Spread Spectrum (DSSS) WiFi protocols • IEEE 802.11b • IEEE 802.11g Japanese Standard ARIB STD-T66 WiFi antenna Gain: 1 dBi Clients • No. of concurrent assigned users: 1,024 • No. of concurrent active users: 32 Radio technology Tx power max. 19 dBm Networking Working modes Bridge (default) and IP router modes Interfaces • Four 10/100BaseT Ethernet LAN (support Half/Full duplexing, Auto-Negotiation, Auto-MDIX) with subscribers network Radio with EasyST (30-pin IDC connector) • DC power • Default reset button WiFi • WiFi certified: FCC Part 15 ClassA; WiFi; WPA, WPA2 • 802.11 b/g Compliancy Safety • Underwriters Laboratories (UL) 60950 (USA) • IEC 60950 (International) • EN 60950 (ETSI) C
EasyWiFi EasyWiFi Specifications 18120511-01 Airspan Networks Inc. C-2 Parameter Value Environmental ETS 300 019 (ETSI) EMC EN 301489 (ETSI) FCC Part 15 Sub Class B Radio • FCC Part 15 15.247- 2.4 GHz • EN 300 328 2.4 GHz • TELEC STD-33/STD-66 (Japan/Telec) WiFi/WiMAX SNMP and Web-based (HTTP) Management SW Upgrade Via TFTP server (using Web-based tool) Operating Temperature 0 – 50°C ambient Storage temperatures -20 to +75°C ambient Operating Humidity 15 - 90% RH Environmental Conditions Storage Humidity 5 - 95% RH Ports • WiFi antenna • 4 x 8-pin RJ-45 Ethernet LAN ports (Half/Full duplexing, Auto-Negotiation, Auto-MDIX) • DC power socket • 30-pin IDC connector Button for reset • LEDs for LAN, WAN, WiFi, Power Mounting • 2 x wall-mounting brackets • 2 locking clips for attaching EasyST Power requirements • Input Voltage / Amperage: 6V/4A • Input Voltage Accuracy: ± 3% max. Ripple & Noise: 100mVp-p max Note: supplied by AC/DC adapter from 110/220 VAC outlet Dimensions (H x W x L) 30 x 125 x 125 mm Mechanical Weight 210 grams
18120511-01 Airspan Networks Inc. D-1 Power Adapter Specifications The specifications of the AC/DC power adapter are listed in the table below: Table C-1: AC/DC power adapter specifications Parameter Value Input voltage 90 to 264 VAC Input frequency 47 to 63 Hz Input inrush current • 30 A at 115 VAC • 60 A at 230 VAC Input Earth leakage • 0.4 mA max. @ 115 VAC • 0.8 mA max. @ 230 VAC Output rating 6V / 4A Output voltage accuracy ± 2% max. Max. output power 24W Line regulation ± 1% max. Load regulation (full to half load) 6 ~6.5V Transient response (full to half load) ± 1% max. dev. 500 uS recovery Temperature coeffeicient ± 0.04% / °C Ripple and noise 100mVp-p max Output Protections • Over voltage protection (output voltage 7.5V) • Over power protection • Short circuit protection • Over current protection: 130% ~ 160% General Efficiency 70% typical at full load D
EasyWiFi Power Adapter Specifications 18120511-01 Airspan Networks Inc. D-2 Parameter Value Hold-up time 5 ms @ 115 VAC full load EMI / RFI VDE and FCC Class B limits Dielectric withstand Input/output: 3000 Vac Input/Ground: 1500 Vac Safety meet UL/CUL UL60950 CE EN55022 Switching frequency 100 kHz Connector for radio Input: interchangeable prongs Output: DC power jack Cable length 1.25 m Dimensions 86 × 46 × 33 mm Weight 180 g MTBF 100,000 hours (MIL-HDBK-217F) Operating temperature 0 to +40°C Storage temperature -20 to +85°C Humidity 5 to 95% RH non-condensing Vibration 2.4G, 5 to 500 Hz Environmental Cooling Free air convection
EasyWiFi Power Adapter Specifications 18120511-01 Airspan Networks Inc. D-3 This page is intentionally left blank.
How to find out more about Airspan products and solutions Airspan has offices in the following countries: Europe Czech Republic Poland Russia United Kingdom Africa South Africa Americas United States Asia Pacific Australia China Indonesia Japan New Zealand Philippines Sri Lanka For more information about Airspan, its products and solutions, please visit our Web site: www.airspan.com Or write to us at one of the addresses below. We will be delighted to send you additional information on any of our products and their applications around the world. Worldwide Headquarters: Airspan Networks Inc. 777 Yamato Road, Suite 105 Boca Raton, Florida 33431-4408 USA Tel: +1 561 893 8670 Fax: +1 561 893 8671 Main Operations: Airspan Communications Ltd. Cambridge House, Oxford Road, Uxbridge, Middlesex UB8 1UN UK Tel: +44 (0) 1895 467 100 Fax: +44 (0) 1895 467 101

Navigation menu