Dell P14F Notebook Computer (with RFID radios) User Manual 2 of 2

Dell Inc. Notebook Computer (with RFID radios) 2 of 2

Contents

User manual 2 of 2

FCC Radiation Exposure Statement WARNING: The radiated output power of Dell RFID devices is far below the FCC radio frequency exposure limits. Nevertheless, Dell RFID devices should be used in such  a  manner  that  the  potential  for  human  contact  during  normal  operation  is minimized.  This  device  has  also  been  evaluated  for  and  shown  compliant  with  the  FCC  RF exposure limits under portable exposure conditions (antennas are within 20 cm of a person's body) when installed in certain specific OEM configurations. Details of the authorized  configurations  can  be  found  at  http://www.fcc.gov/oet/fccid/help.htmlby entering the FCC ID number on the device. Interference Statement These devices comply with Part 15 of the FCC Rules. Operation of the devices is subject to the following two conditions: (1) The devices may not cause harmful interference, and (2) The devices must accept any interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device,  pursuant  to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide reasonable  protection  against  harmful  interference  in  a  residential  installation.  This equipment  generates,  uses,  and  can  radiate  radio  frequency  energy.  If  the equipment is not  installed  and  used  in  accordance  with  the  instructions,  the  equipment  may  cause harmful interference to radio communications. There is no guarantee, however, that such interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does  cause harmful interference to radio or television reception (which can be determined by turning the  equipment  off  and  on),  the  user  is  encouraged  to  try  to  correct  the  interference  by taking one or more of the following measures: xRelocate this device.xIncrease the separation between the device and the receiver.  xConnect  the  device  into  an  outlet  on  a  circuit  different  from  that  of  other electronics.xConsult the dealer or an experienced radio technician for help.NOTE: Dell RFID devices  must be installed and  used in strict accordance with  the manufacturer’s instructions as described in the  user documentation  that comes with the  product.  Any  other  installation  or  use  will  violate  FCC  Part  15  regulations. Modifications  not  expressly  approved  by  Dell  could  void  your  authority to  operate the equipment.

Navigation menu