Dell CS1A13 Thin Client Terminal User Manual

Dell Inc. Thin Client Terminal

User manual

Cloud Connect Setup and Features InformationModel CSx, Product ID: CS1A13 To find the latest Quick-Start Guide, go to http://www.dellwyse.com/manuals and click on the name of your product.Important: The license at http://www.dellwyse.com/license as of the purchase date is the controlling licensing agreement. By copying, using, or installing the software or the product, you agree to be bound by those terms. Setting Up Your Cloud ConnectBe sure you have read all safety guidelines before setting up and operating this product. Refer to the figures and proceed as follows:1. Connecting Your Cloud Connect to the MonitorHDMI Connection — Plug your Cloud Connect into the HDMI port on the monitor. (If your monitor/TV has multiple video ports, verify that you select the correct video port to display the information from the Cloud Connect.) Connect the Micro end of the provided USB cable to the Cloud Connect’s Micro USB On-The-Go (OTG) port, and connect the standard end of the USB cable to a powered USB port or use a standard USB power adapter for smartphones. The Power status indicator will light blue when connected. As the Cloud Connect starts up, the Activity status indicator will light amber.Note: If you cannot plug in Cloud Connect due to mechanical interference, use the HMI extension cable.MHL Connection — Plug your Cloud Connect into the MHL port on the monitor; no external adapter power is required. The Power status indicator will light blue when connected. As the Cloud Connect starts up, the Activity status indicator will light amber.2. Pairing Your Bluetooth Keyboard and Bluetooth MousePress and hold the Bluetooth pairing button, and then follow the on-screen steps to complete the Bluetooth setup for your Bluetooth keyboard and mouse.3. Turning Off Your Cloud ConnectIt is strongly recommend to use the on-screen button to power off your Cloud Connect.For more information, locate your product and download the Fact Sheet using the Cloud clients tab at:http://www.dellwyse.com/productsSafety GuidelinesImproper connection or use of this product could result in component failure or undesired interference. Read the following guidelines before setting up and operating the device.Setup•Do not force a connector into its socket. If any undue resistance is encountered, ensure that the connector is correctly oriented to the receptacle.•The main unit is not user serviceable; opening or accessing the case will void your warranty. Care•To clean your device, first disconnect it from all connections, and then use a soft cloth dampened with water for cleaning. Do not use liquid or aerosol cleaners.Power Sources•The Cloud Connect product requirements are a minimum of 5.0 V, 0.5 mA. If a USB port is not available on the monitor, you can use a standard USB 2.0 power adapter. •Surge protectors for electrical devices are recommended in areas of lightning. However, when lightning is occurring, your equipment should be properly shut down and unplugged from AC power until the storm has passed.Views * Not all USB devices are supported; check with Dell Wyse or your Dell Wyse representative to find out if a particular device is supported on your product.Need More Information?Dell Wyse Reference Guides - Related documentation is available at:http://www.dellwyse.com/manualsDell Wyse-Approved Accessories - Information about approved accessory options are available at:http://www.dellwyse.com/products/accessoriesDell Wyse Service and Support - Latest software images are available at: http://www.dellwyse.com/downloadsDell Wyse and the Environment - Information about Wyse compliance with RoHS and with the Waste Electrical and Electronic Equipment (WEEE) is available at: http://www.dellwyse.com/greenDell Wyse and E-Recycling - Information about recycling unwanted Wyse product available within the United States is available at:http://www.dellwyse.com/erecyclingDell Wyse Warranty Registration* - Register your product at:http://www.dellwyse.com/registration* The standard warranty is one year from the date of purchase.1Bluetooth pairing button 7Power/Activity status indicators 2Micro SD slot 8Micro USB OTG* port/power input for 3HDMI/MHL connector HDMI connection 4Cap 9Micro USB to Standard USB 2.0* cable5Mini USB 2.0* host port 10 HDMI extension cable 6Wrist strap slot
Wyse Technology LLC5455 Great America ParkwaySanta Clara, CA 95054 USA©2013 Wyse Technology LLC. All rights reserved. This product and/or associated software are protected by copyright international treaties, and various patents, including the following U.S. patents: 6,836,885 and 5,918,039.883958-01L Rev. A August 2013Printed in USAPrinted on 50% post-consumer recycled paperFederal Communications Commission Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee this equipment does not cause harmful interference to radio or TV reception. This can be determined by turning the equipment on and off. The user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio or television technician for help. FCC RF Radiation Exposure Statement 1. This Transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device was tested for typical lap held operations with the device contacted directly to the human body to the back side of the notebook computer. To maintain compliance with FCC RF exposure compliance requirements, avoid direct contact to the transmitting antenna during transmitting.Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.According to FCC 15.407(e), the device is intended to operate in the frequency band of 5.15GHz to 5.25GHz under all conditions of normal operation. Normal operation of this device is restricted to indoor used only to reduce any potential for harmful interference to co-channel MSS operations.Limited One-Year Hardware Warranty For Mobile ProductsPlease Retain Proof of PurchaseWyse Technology LLC warrants this product to be free from defects in material and workmanship for a period of One (1) year after the original date of consumer purchase. During this period Wyse will, at its option, either replace a defective product with a new or rebuilt product or repair it with new or rebuilt parts at no charge except as stated below. The parts or product that are replaced become the property of Wyse.This limited warranty is provided to the original owner only and is not transferable to any third party.This limited warranty does not cover any of the products hardware that you or any third party has modified or altered; you bear the sole responsibility and liability for any such modifications or alteration.WYSE HEREBY DISCLAIMS ALL OTHER EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SOME STATES AND COUNTRIES MAY NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.THIS LIMITED ONE-YEAR WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE OR COUNTRY TO COUNTRY.ExclusionsWyse does not warrant that the operation of this hardware product will be without interruption or error-free. This Hardware Limited Warranty does not extend to any product from which the serial number has been removed or that has been damaged or rendered defective as a result of:•Accident, misuse, abuse, neglect, contamination, improper maintenance or other external causes.•Operation outside the published operating specifications for the product, including improper environment, excessive or inadequate heating or air conditioning or electrical power failures, surges or other irregularities.•Improper site preparation or maintenance.•Software, interfacing, parts or supplies not supplied by Wyse.•Any use other than ordinary commercial or industrial application.•Virus infection.•Loss or damage in transit.•Repair, modification, improper adjustment or installation of options or parts by anyone other than (i) Wyse, (ii) a Factory Authorized Service Center or (iii) your own installation of end-user replaceable Wyse or Wyse approved parts.To Obtain ServiceFor customers in North America, Oceania, and APAC, to obtain an RMA, or to find the nearest Authorized Service Center near your location, visit the Wyse Web site at:http://www.dellwyse.com/support/overviewFor customers in other countries, to find the nearest Authorized Service Center in a country near you, visit the Wyse Web site at: http://www.dellwyse.com/globalTo obtain service under this limited warranty, deliver the product, along with the dated proof of purchase, to Wyse or a Factory Authorized Service Center. If you choose to use Wyse's factory service, call Wyse for a Return Material Authorization (RMA) number. If you cannot deliver the product in person, then please do the following:1. Pack it in its original shipping container (or equivalent).2. Put the RMA number on the address label.3. Insure it (or assume the risk of loss/damage during shipment).4. Pay all shipping charges.Wyse will pay the return shipping charges.If through no fault of the customer Wyse is unable to replace or repair the product as provided for above, Wyse will refund the customer's purchase price. In order to obtain a refund, you must either deliver the product in person or ship the product to the Customer Service Location as directed by the RMA Department. Upon receipt of the product and verification of payment, Wyse will refund the purchase price plus reasonable shipping charges.

Navigation menu