DawnSun Electronic Technology ZhongShan TX007R Fan remote Controller User Manual TX007 TX007 R

DawnSun Electronic Technology.Co.,Ltd.ZhongShan Fan remote Controller TX007 TX007 R

Manual

OPERATION INSTRUCTION①②③④Front●Learning Code -With the main power on, press the& button on the transmitter at the same timeand hold for 5 seconds could achieve the learningcode.MODEL: TX007TX007-RRemote Functions:●●Light Source Auto-recognition Technique :Be able torecognize incandescent and CFL automatically.Switch Off Memory - when power is off and back again,resume the status of both light and fan before switch off.Back Back:,◎◎:.1.Fan speed control button To control theceiling fan speed HIGH MEDIUM,LOW.2.FAN/OFF button: Turn off the fan;Press and hold for 5 secondsto enter Light Delay Off mode.3.LIGHT ON/OFF/DIMMER button To control lighton,off and dimmer:,◎◎:.1.Fan speed control button To control theceiling fan speed HIGH MEDIUM,LOW.2.FAN/OFF button: Turn off the fan;Press and hold for 5 secondsto enter Light Delay Off mode.3.LIGHT ON/OFF/DIMMER button To control lighton,off and dimmer4.Extended FunctionSwitch.Note:Install the 12-volt battery( included) to the remote control.TX007 TX007-R
●Products shall be subject to any changes without additional notices dueto DawnSun will keep innovation and optimization on the products.FCC STATEMENT1. This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1)This device may not cause harmful interferenceThis device must accept any interference received including interference that maycause undesired operation.2. Changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.,(2)NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and use in accordance withthe instructions, may cause harmful interference to radio communications.However there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:1.Reorient or relocate the receiving antenna.2.Increase the separation between the equipment and receiver.3.Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.4.Consult the dealer or an experienced radio/TV technician for help.,OPERATION INSTRUCTION

Navigation menu