DawnSun Electronic Technology ZhongShan TX003E Fan Remote Controller User Manual

DawnSun Electronic Technology.Co.,Ltd.ZhongShan Fan Remote Controller Users Manual

Manual

OPERATION INSTRUCTIONMODEL:TX003TX003-RTX003-ETX003-ERBackFrontBack6Back5BackRemote control functions:1.Fan speed control button To control the ceilingfan speed 1 62.Fan off button To turn the fan off3.Reverse function button To control fan direction4.Light control button To control light on and off.5.CODE setting button With fan power off arrangecode switch to desired code setting.Turn fan power on.:-：.:.::,Remote control functions:1.Fan speed control button To control the ceilingfan speed 1 62.Fan off button To turn the fan off3.Reverse function button To control fan direction4.Light control button To control light on and off.5.CODE setting button With fan power off arrangecode switch to desired code setting.Turn fan power on.6.Extended Function Button.:-：.:.::,Remote control functions:1.Fan speed control button To control the ceilingfan speed 1 6.2.Fan off button To turn the fan off3.Reverse function button To control fan direction4.Light control button To control light on and off.:-：.:.:Remote control functions:1.Fan speed control button To control the ceilingfan speed 1 6.2.Fan off button To turn the fan off3.Reverse function button To control fan direction4.Light control button To control light on and off.5.Extended Function Button.:-：.:.:●.Learning Code Pairing: Within 30 seconds afterpower on, press and hold Button2&5atthesametime for 5 seconds. The light will signify pairing isdone Light will on when it was off, vice versa.●.Learning Code Pairing: Within 30 seconds afterpower on, press and hold Button2&5atthesametime for 5 seconds. The light will signify pairing isdone Light will on when it was off, vice versa.Note:Install the 12-volt battery(not included) to the remote control.TX003 TX003-RTX003-E TX003-ER
OPERATION INSTRUCTIONNote: The receiver(inside the motor)provides the function of multiplicative protection.1.Lock position: The DC motor has a built-in safety feature against obstruction duringoperation. If this occurs, the motor will discontinue operation within 3 seconds ofinterruption. To reset, simply disable power supply to the fan motor and re-start.2.Over 80W protection: When the receiver detects power consumption is greater the 80W,the receiver power will immediately discontinue. To reset, simply disable power supplyto the fan motor and re-start.3.Blade setup of motor is arrange according to loading condition; please only installapproved blades from a certified dealer or this may avoid the factory warranty.●Products shall be subject to any changes without additional notices dueto DawnSun will keep innovation and optimization on the products.FCC STATEMENT1. This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1)This device may not cause harmful interferenceThis device must accept any interference received including interference that maycause undesired operation.2. Changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment..,(2)NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and use in accordance withthe instructions, may cause harmful interference to radio communications.However there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:1.Reorient or relocate the receiving antenna.2.Increase the separation between the equipment and receiver.3.Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.4.Consult the dealer or an experienced radio/TV technician for help.,Caution: Changes or modifications not expressly approved by the party responsible for compliance

Navigation menu