DVS Korea VXM2300 DVD Player with FM Transmitter User Manual Users manual 2

DVS Korea Co., Ltd. DVD Player with FM Transmitter Users manual 2

Contents

Users manual 2

21Getting StartedGetting StartedConnecting to Car Radio SystemConnecting 2 wires to car antenna and car radio system each other.For use internal FM transmitter any connecting will be required. Wired FM transmitter modelTVVideo SignalAudio SignalCar RadioCar AntennaJust connect antenna to it's connectorSetting the FM transmitter frequencySETUP => Audio Setup Page => FM Tx => Setting FM Frequency (Off, 88.1MHz ~ 88.9MHz)CAUTION- Some Frequency has any broadcasting signal. - Audio signal has noise sometimes followed by moving position or electrical noise.୔Sometimes wireless FM transmitter causes some noise according to setting position of DVD player and environmental condition (high voltage wire or another radio frequency)Wireless FM transmitter modelAudio SignalTVVideo SignalCar RadioCar Antenna
22Getting StartedGetting StartedConnecting to Component Video InputSome TV system has component video signal input terminal. DVD player can output component video signal. At this mode progressive scan will possible.Connect the component video (Y/Pb/Pr or RGB) cable to it's terminal and setting the setup menu.Connecting to Component Video InputSetting the Component video outputSETUP => Video Setup Page => Component (select Off / YUV / RGB)11Setting the Progressive Scan (enable when YUV or RGB selected)SETUP => Video Setup Page => TV Mode (select Interlace / P-SCAN)22Audio OutputAudio InputVideo InputTVVideo OutputComponent CableR (Red)L(White)LYYPbPrPbPrR
23Basic OperationBasic OperationPlaying DVD Video DiscsEnsure that your DVD player is connected correctly to the TV and audio system, which are output components. Turn on the power of the TV and audio system. Ensure that the local code of the DVD player is matched to that of the disc. If not matched, your disc will not be played.Before Playing Your DVD DiscPress the POWER ( )button.11Insert the DVD disc. Ensure that the labeled surface (not the surface where data is recorded) is at the top when placing it.22Your DVD disc will be automatically played depending on the current program mode.1) The Disc menu is displayed on the screen. Select the desired menu using the arrow ( )buttons or NUMBER buttons and press the ENTER button to play your DVD disc.33To Play a DVD Disc
Some DVD discs contain menus. Sometimes these are displayed automatically when you start playback; others only appear when you press MENU or Title remote control.TITLE ( )button: Displays the top menu of a DVD discMENU ( )button: Displays a DVD disc menu-this varies with the disc and may be the same as the top menu.RETURN ( )button: Returns to the previously displayed menu screen.Arrow( ) button: Move the cursor around the screen.ENTER ( )button: Selects the current menu option.Number button: Selects a numbered menu optionPLAY/PAUSE( ) : Starts playback or pause a disc that's playing (press again to restart playback)STOP( ): Stop playbackFR( ): Press for fast backward searching.FF( ): Press for fast forward searchingPREV( ): Skip to the previous chapter.NEXT( ): Skip to the next chapter.24Basic OperationBasic Operation- Don't move the DVD player during playback. During so may damage the disc and the DVD player.- When " " appears on the TV screen while a button is pressed, it means that this function is not available on the disc you are playing.- Depending on the DVD disc, some operations may be different or restricted. Refer to the jacket or case of disc you are playing.NoteBasic Playback ControlsBasic Disc Menu Controls
25Basic OperationBasic OperationPlaying MP3 discsTo Play a MP3 FileInsert the MP3 disc. Make sure that the disc's label is facing up.11MP3 menu screen is displayed automatically depending on MP3 disc's folder (directory) structure22Using the UP( ) or DOWN( ) button to find the desired folder33Press the ENTER( ) button to select. The TV screen shows the file lists under the folder. 44Press the PROGRAM ( ) button repeatedly. Each time you pressed, PROGRAM mode will be changed repeatedly. (Folder a Filelist)55
26Basic OperationBasic Operation- The file name is only displayed in English.- This DVD player is compatible with the "MPEG-1 Audio Layer 3" standard. It is not compatible with such other standards as "MPEG-2 Audio Layer 3", "MPEG-2.5 Audio Layer 3", MP1, MP2, etc.- Do not play CD-R/RW discs containing any files other than music CD files, MP3 and JPEG files. - Programmed playback is not possible with MP3 discs.- When writing MP3 files on CD-R/RW discs, select "ISO9660 level 1" as the writing software format.NotePlaying Kodak picture CD and JPEG file playWhen a Kodak Picture CD is inserted, an automated slide show is launched. When a JPEG file loaded, the table of contents is displayed on TV screen. 16 slideshow transition modes are provided. Use the PROGRAM button to switch the slideshow transition mode. Diagonal Wipe Right Top -> Diagonal Wipe Left Bottom -> Diagonal Wipe Right Bottom -> Extend from Center H -> Extend from Center V -> Compress to Center H -> Compress to Center V -> Window H -> Window V -> Wipe from Edge to Center -> Move in from Top -> None)Each time the ZOOM button is pressed during playback, zoom 125 -> 150 -> 200 ->50 -> 75 -> zoom off is selected repeatedly - UP( ) button : Moving up the zooming picture - DOWN( ) button : Moving down the zooming picture - LEFT( ) button : Moving left the zooming picture - RIGHT( ) button : Moving right the zooming picture22Select the pictureSelect the picture, you want to see, by pressing the UP( ) or DOWN( ) button. The selected item shows as small size picture on the right side of File Menu Screen.11Image rotationThere are 4 modes to rotate a picture: Left, Right, Invert, Mirror - UP( ) button : invert - DOWN( ) button :mirror - LEFT( ) button :Turn left - RIGHT( ) button :Turn right22
27Basic OperationBasic OperationFast Forward/BackwardUse this function to play the DISC contents in fast forward or fast reverse. During searching, audio will be muted (except CD-DA).Press the FR ( ) or FF ( ) button during disc play.11Press the PLAY/PAUSE ( ) button to resume normal playback.22Skip Forward/BackwardUse this function to move to the net or previous chapter for DVD, track for VCD and CD-DA.Press the PREV ( ) button to go to the previous chapter or track.11Press the NEXT ( ) button to go to the next chapter or track.22- This function will not operate if there is only one chapter per a disc.NoteඔඔG x 2 ඔඔG x 4 ඔඔG x 8 ඔඔG x 16 ඔඔG x 32ඖඖG x 2 ඖඖG x 4 ඖඖG x 8 ඖඖG x 16 ඖඖG x 32
28Basic OperaionBasic OperationSlow Forward/BackwardUse this function to play the DISC contents in slow forward or slow reverse. During searching, audio will be muted.Press the PLAY/PAUSE ( ) button during play mode.11Press the PLAY/PAUSE ( ) button to resume normal playback.33Press the ( ) or ( ) repeatedly.22Frame-by-Frame PlaybackPress the PLAY/PAUSE ( ) button during play mode.11Press the ( ) button repeatedly.Each time you pressed, forward one frame is displayed at a time.22Press the ( ) button repeatedly.Each time you pressed, backward one frame is displayed at a time.33Press the PLAY/PAUSE ( ) button to resume normal playback.44 1/2 1/4 1/8 1/161/2 1/4 1/8 1/16ඖඖඖඖඖඖඖඖ
29Advanced OperationAdvanced OperationOSD (On-screen Display)You can display the playback status on TV screen as following; Title, Chapter number, Playing time, Disc.Press the DISPLAY ( )button during playback- Disc, Chapter(DVD), Track(CD-DA), Time information appears on screen.11To turn off the on-screen display, press the DISPLAY ( )button22Selecting Audio LanguageIt is possible to change the audio soundtrack language to a different language from the one selected at the initial settings. This operation works only with discs on which multiple audio soundtrack languages are recorded. If the loaded disc supports multiple languages, you can select the audio language.Press the AUDIO button repeatedly during playback. Each time you pressed, the audio language is changed11
30Advanced OperationAdvanced OperationSelecting SubtitlesIt is possible to change the subtitle language to a different language from the one selected at the initial settings. This operation works only with discs on which multiple subtitle languages are recorded.Press the SUB-T ( )button during disc play.The subtitle info banner appears.The default is Subtitle off.If no subtitle are recorded, the ( ) icon will appear.11Press the SUB-T ( )button repeatedly until the desired subtitle language is displayed.22To turn subtitle off, press the SUB-T ( )button until Subtitle off is displayed.33This function is a disc dependent. There are some DVD discs that prevent selecting subtitle even if it supports multiple subtitles. In this case, the subtitle should be selected via disc menu.Note
31Advanced OperationAdvanced OperationRepeating a Title, Chapter (DVD), Track (CD-DA)You can play the desired title, chapter, section repeatedly.Press the PLAY MODE ( )button during disc play. - Each press of the PLAY MODE button changes the repeat mode in the following sequence. 11To resume normal playback, press the PLAY MODE ( )button repeatedly until the repeat mode indicator disappears on screen.22Repeating a specific sectionDuring playback, press the A-B ( )button at the beginning of the desired section. 11With some DVD discs, there may be times when repeat playback is not possible.Note
32Advanced OperationAdvanced OperationProgram playThis function is used to play the Title, Chapter and Tracks on the disc in order you program.Press the PROGRAM ( ) button on remote controller. Program menu is displayed on screen. 11Press the A-B ( ) button again at the end of the section. "AB" will be displayed on the screen then the A-B section is continually repeated.22To resume normal playback, press the A-B ( ) button repeatedly until the repeat mode indicator disappears on screen.33Select the Title, Chapter (DVD) and Track NO. (CD-DA) is displayed on the TV screen.22Select other NO. to program. Repeat step 2 until the programming is finished. You can add desired tracks up to 20 programs.33DVD CD-DA
33Advanced OperationAdvanced OperationUsing the UP ( ) or DOWN( ) button to select the "Start". And play now begins in the programmed sequence.44Stop all the programmed title, chapter and tracks. Using the UP( ) or DOWN( )button to select the "Exit".55Zooming a PicturePress the ZOOM ( )button during playback.DVD CD-DADVD CD-DA11Each press of the ZOOM ( )button changes the zoom mode in the following sequence. 22If you press the direction button during the ZOOM mode, the ZOOM point will shift.33To resume normal playback, press ZOOM ( )button repeatedly until the repeat mode indicator disappears on screen.442 3 4 1/2 1/3 1/4 NORMAL
34Advanced OperationAdvanced OperationSwitching the Camera AngleSome DVDs contain scenes that have been shot simultaneously from multiple angles.Press the ANGLE ( )button on the remote control during disc play. The ANGLE icon appears. If no additional camera angle are recorded, The ( ) icon will be displayed.11If multiple camera angles are recorded, the ANGLE icon displays the current angle number and the number of available.22Press the ANGLE ( )button again to go to the next camera angle.33This feature does not work if a DVD has not been recorded with multiple camera angleNote
35Advanced OperationAdvanced OperationDIRECT Search (GO TO)This function is used to go to the chapter, track or song of the disc you want.Press the GOTO ( )button during playback.11Select "Chapt" and press DOWN ( ) button.22Enter the title number using numeric button.33DVDPress the GOTO ( )button during playback.11Select "Track" and press the DOWN ( ) button.22Enter the Track number using numeric button.33CD-DAPress the GOTO ( )button during playback.11Select "Song" and press the DOWN ( ) button.22Enter the Song number using numeric button.33MP3
36Using the Setup MenuUsing the Setup MenuBasic OperationsOnce the initial settings have been completed, the player can always be operated under the same conditions whenever the power is switched on. These settings are called SETUP data that are easily modified and stored using the SETUP menu. The SETUP menu includes the information for GENERAL, VIDEO, AUDIO and PREFERENCES system controls.Press SETUP ( )button during stop mode. And use the ARROW ( )button and ENTER ( ) button to navigate and select options. The current setting for any option is marked with a colored box.Press the STOP ( ) button, if the disc is being played.11To call the SETUP menu, press the SETUP ( ) button.22Use the LEFT( ) or RIGHT( ) button to find desired items.33To turn off the SETUP menu, press the SETUP ( )button again.44Depending on the disc, some setup menu selections may not work properly.Note
General SetupTV DISPLAYYou can select a TV screen aspect ratio according to your TV.If the TV on which the movie is played is of 'WIDE' type, choose "WIDE". If it is of "4:3" type, choose NORMAL/PS(Pan & Scan) or NORMAL/LB(Letter Box).NORMAL/PS : Choose this setting if you want the movie to fill the entire screen of your TV. This might mean that the left and right edges won't be seen.NORMAL/LB : Choose this setting if you want to see movies in their original aspect ratio. The movie might appear with black bars at top and bottom of the screen.WIDE : Choose this setting if your DVD player is connected to a wide screen TV.11ANGLE MARKYou can set up so that the angle mark appears on scenes.On: When selected, the screen will show angle mark during disc play.Off: When selected, no angle mark is shown on the screen.2237Using the Setup MenuUsing the Setup Menu
38Using the Setup MenuUsing the Setup menuOSD languageUse this option to set the on-screen display language.When selected, change to set the on-screen display language.33CAPTIONS Adjusts caption selections.On: Choose this setting to display captions.Off: Choose this setting to close captions.44Last MemoryAdjusts Last Memory selections55
39Using the Setup MenuUsing the Setup MenuAudio SetupEQ TypeThis unit can produce a 3D Surround effect, using 3D Surround Sound technology. Choose the desired preset equalizer mode. (Rock, Pop, Live, Dance, Techno, Classic, Soft)11BASS BOOSTThis is enhanced at all levels without distorting other frequency. 22SUPER BASSThis is enhanced at all levels without distorting other frequency.33TREBLE BOOSTThis is enhanced at all levels without distorting other frequency.44
40Using the Setup MenuUsing the Setup MenuREVERB MODETo enjoy various surround sound, features when you can select and desired sound effect. (Concert, Living Room, Hall, Bathroom, Cave, Arena, Church)55SPDIF SETUPTo connect the unit's digital output to an external device equipped with a digital input, this item must be set correctly.1) SPDIF OFF 2) SPDIF / RAW : Output Dolby Digital (or DTS) Bitstream directly. If you connected this unit's DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder).3) SPDIF / PCM : Output Decoded Dolby Digital (or DTS) Bitstreem. Select when connected to a 2ch digital stereo amplifier. This unit outputs sounds in the PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital, MPEG1, or MPEG2 recording system.66
41Using the Setup MenuUsing the Setup MenuVideo SetupSHARPNESSAdjusts the sharpness of the image.Press the ENTER( ) button to select the adjust mode, the use the UP( ) or DOWN( ) buttons to select the image quality adjustment item. 11BRIGHTNESS1) Adjusts the picture's brightness.2) Press the ENTER ( )button to select the adjust mode, then use the LEFT( ) or RIGHT( ) buttons to select the image quality adjustment item.22CONTRAST1) Adjusts the contrast of the picture.2) Press the ENTER ( )button to select the adjust mode, then use the LEFT( ) or RIGHT( ) buttons to select the image quality adjustment item.33
42Using the Setup MenuUsing the Setup MenuPreference SetupPBCThis feature is only available when a (Super) Video CD is loaded. It allows you to disable or enable the PBC (Playback Control) menu of VCD discs. 1) Press the SETUP ( )button when during stop mode.2) Press the LEFT/RIGHT ( )button to move to Preference.3) Press the UP/DOWN ( )button to move PBC.4) Press the ENTER ( )button.5) Press the UP/DOWN ( )button to select On/Off.11AUDIOUse the audio language menu to select the subtitle language that you prefer. If the disc you are playing has that language available, it will display subtitle in that language.22SUBTITLEUse the subtitle language menu to select the subtitle language that you prefer. If the disc you are playing has that language available, it will display subtitle in that language.331) Press the SETUP ( )button when during stop mode.2) Press the LEFT/RIGHT ( )button to move to Preference.3) Press the UP/DOWN ( )button to move Audio.4) Press the ENTER ( )button.5) Press the UP/DOWN ( )button to select desired audio language.1) Press the SETUP ( )button when during stop mode.2) Press the LEFT/RIGHT ( )button to move to Preference.3) Press the UP/DOWN ( )button to move Audio.4) Press the ENTER ( )button.5) Press the UP/DOWN ( )button to select desired subtitle.
43Using the Setup MenuUsing the Setup MenuDISC MENUUse the Disc Menu option to select the language you want a DVD's disc menu to be displayed in (not the same as the player menu)4PARENTALThe Parental feature is a rating limit system, like movie ratings.It works with DVD's that have been assigned a rating. This option lets you determine how your player will react to discs that contain movies that are rated (in the U.S.A., the Motion Pictures Association of America rates movies as G, PG, PG-13, etc.). You decide which ratings require a password and which ones don't. 51) Press the SETUP ( ) button during stop mode2) Press the LEFT/RIGHT ( ) button to move to Preference.3) Press the UP/DOWN ( ) button to move to Sub.4) Press the ENTER ( ) button.5) Press the UP/DOWN ( ) button to select Disc Menu.DEFAULTIf user selects reset from the setup menu, all the value of setup menu will be initialized by factory setting value. (Exception: Parental level, Region code and Password values will not be changed)61) Press the SETUP ( ) button when stop mode2) Press the LEFT/RIGHT ( ) button to move to Preference.3) Press the UP/DOWN ( ) button to move to Parental.4) Press the ENTER ( ) button.5) Press the UP/DOWN ( ) button to select desired parental level.1) Press the SETUP ( ) button when stop mode.2) Press the LEFT/RIGHT ( ) button to move to Preference.3) Press the UP/DOWN ( ) button to move to Default. 4) Press the ENTER ( ) button.5) Press the ENTER ( ) button to select reset.
44Using the Setup MenuUsing the Setup MenuPassword Setup1. PASSWORD MODE11PASSWORD CHANGE1) Select "Password Setup" sub item2) Enter your old password and new password in 4 digits.3) Re-enter new password for confirms then press ENTER button.11- Do not forget the password- The setting cannot be changed without inputting the correct password.Note
45Additional InformationAdditional InformationSpecificationsGeneralSignal SystemVideo outputS-Video outputAudio outputAudio CharacteristicDigital OutputAccessories* OptionalSystemPower SupplyPower ConsumptionWeightExternal Dimensions (mm)Operation TemperatureOperation HumidityNTSC / PAL / MULTIOutput LevelJacksY (luminance) - Output LevelC (color) - Output LevelJacksDuring Audio OutputNumber of ChannelsJacksFrequency ResponseS/N RatioDynamic RangeTotal Harmonic DistortionCoaxial Digital OutputAudio/Video CableRemote Control1.5V(AAA SIZE)IR Module *Cigar Cable *DC Cable *Mounting Bracket for Car *Screws *Manual, Warranty CardDVD-Video/DVD-R/-RW/+R/+RW/Super VCD/VCD/CD/CD-R/RW/ MP3 files/Picture CDDC 12V, 1.5A1A, 12W1,175g178.0(W) x 212.2(D) x 42.0(H)-5୅ ~ 50୅10~80%1.0Vp-p(75ohm)RCA Jack1.0Vp-p(75ohm)0.286Vp-p(75ohm)S-Video Jack2Vrms(1kHz, 0dB)2RCA Jack4Hz to 44kHz(DVD fs: 96kHz)More than 85dB More than 85dB 0.08%RCA Jack112111241
46Additional InformationAdditional InformationTroubleshootingCauseThe power cord is disconnected.No disc in inserted.The equipment connected with the audio cable is not set to receive DVD signal outputThe audio cables are not connected securely.The power of the equipment connected with the audio cable is turned off.The digital audio output is set the wrong position.The TV is not set to receive DVD signal output.The video cable is not connected securely.The disc is dirty.No disc is inserted.An unplayable disc is inserted.The disc is placed upside down.The disc is not place within the guide.A menu is on the TV screen.The rating level is set.SymptomNo powerThe power is on, but the DVD player doesn't workNo soundNo pictureThe playback pictureis poor.CorrectionPlug the power cord into the wall outlet securelyInsert a disc. (Check that the DVD or audio CD indicator in the DVD display is lit.)Select the appropriate video input mode on the TV so the picture from the DVD player appears on the TV screen.Connect the audio cable into the jacks securely.Turn on the equipment connected with the audio cable.Set the Digital Audio Output to the correct position, and then turn on the DVD player again by pressing the POWER button.Select the appropriate video input mode on the TV so the picture from the DVD player appears on the TV screen.Connect the video cable into the jacks securely.Switch TV to appropriate mode using the TV mode using the TV MODE button on the remote control. Check if you pressed the AUDIO ONLY button.Clean the disc.Insert a disc. (Check that the DVD, or audio CD indicator in the DVD display is lit.)Insert a playable disc. (Check that the DVD, or audio CD indicator in the DVD display is lit.)Place the disc with the playback side down.Insert the disc correctly inside the guide.Press the SETUP button to turn off the menu screen.Cancel the rating function or change the rating level.
47Additional InformationAdditional InformationCauseThe remote control is not pointed at the remote sensor of the DVD player.The remote control is too far from the DVD player.There is an obstacle in path of the remote control and the DVD player.The battery in the remote control is exhausted.Incorrect Audio menu settings.If a track name not end in ".mp3" or ".MP3", this player will not recognize it as an MP3 track.SymptomThe remote control doesn't work properly.The analog audio OK, but there appears to be no digital audio signal.The disc containing the MP3 tracks won't playSome MP3 tracks appear to be missing from a disc.CorrectionPoint the remote control at the remote sensor of the DVD player.Operate the remote control within about 23ft(about 7m).Remove the obstacle.Replace the battery with new one.Make sure that the Digital Out setting is set to BITSTREAM or PCM. Check that the BITSTREAM and PCM settings are suitable for your amplifier check the amp's instruction manual.If the disc is a recordable CD, make sure that the disc is finalized.Check that the tracks are in the MPEG1 Audio Layer 3 format.୔GDesigns, Accessories and specifications are subject to change without notice.
Limited WarrantyOne(1) Year Limited WarrantyWHO IS COVERED?A proof of purchase is required to received to warranty service. A sales receipt or other document showing original date purchase is considered proof of purchase.Warranty repair is one (1) year limited warranty coverage :* Parts and labor are included under warranty repair.WHAT IS NOT COVERED ?NOTE : If you don't have proof of purchase, then your unit will be considered out-of-warranty. Out-of-warranty repairs will be charge at a flat labor rate, including any necessary parts.WHAT IS EXCLUDED ?Your warranty does not cover :* Labor charges for installation ro setup of the product, adjustment of customer controls on the product, and installation or repair of antenna systems outside of the product.* Product repair and / or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of its manufacturer.* A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and / or authorized, or repair of products damaged by these modifications.* Incidental or consequential damages resulting from the product. (Some states do not allow the incidental or consequential damages, so the above exclusion may not apply to you. This includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted.)MAKE SURE YOU KEEPPlease keep your sales receipt or other document showing proof purchase. Also keep the original box and packing material in case you need to return your product.This warranty gives you specific legal right.You may have other right which vary from state / province to state / provaice.CUSTOMER SUPPORTMODEL #SERIAL #

Navigation menu