DIGI SINGAPORE SD3100 ESL SD CARD User Manual 6wu0

Teraoka Weigh-System Pte Ltd. ESL SD CARD 6wu0

User Manual

COPYRIGHT © 2005 TERAOKA WEIGH-SYSTEM PTE LTD SERVICE MANUAL SD-3100 ESL SD CARD SD-3100 Tentative Edition
Table of Content i) Notice .................................................................................................................................................1 ii) Safety Information..............................................................................................................................2 iii) Safety Regulations.............................................................................................................................2 1. General.............................................................................................................................................................4 1.1 Model Specification............................................................................................................................4 2.1 Dimension (in mm) ...............................................................................................................................5 2.1.1 InfoPad (with protective rubber cover)....................................................................................5 2.1.2 SD-3100 (ESL SD CARD) ......................................................................................................5 2.2 Overall Layout ......................................................................................................................................6 2.3 Key button Layout.................................................................................................................................6 2.4 Location of Magnet Area ......................................................................................................................8 2.5 InfoPad IP Address And Configuration Setting ....................................................................................9 2.5.1 InfoPad Wireless IP Address Setting......................................................................................9 3. Revision Records..........................................................................................................................................11
1 i) Notice DIGI® The material contained in this document is proprietary and for information only and is subject to change without notice. Teraoka Weigh-System assumes no responsibility for any errors or damages arising from misinterpretation of any procedure. Screen displays, operating procedures and supporting features might vary with different software version releases. This document shall not be reproduced whether in part or whole without the written consent from Teraoka Weigh-System Pte Ltd. Teraoka Weigh-System Pte Ltd 4, Leng Kee Road #06-01 SIS Building Singapore 159088
2 ii) Safety Information The operator of the equipment shall comply with the safety and warning indications and procedures outlined in this document. Teraoka Weigh-System Pte Ltd assumes no responsibility or liability for failure to comply with these requirements. • Repair and servicing of product, shall only be carried out by trained and qualified personnel. Disclaimer: Specifications are subject to change without notice. All dimensions shown are approximate. Please be aware that Teraoka has indicated that its hardware and software used in the product may require additional updates in the future as our product is continually under development. The need for such updates most likely applies to the Printer software. CAUTIONS: FOR PLUGGABLE EQUIPMENT, THAT THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. POUR LE MATÉRIEL RACCORDÉ PAR PRISE DE COURANT, LE SOCLE DE PRISE DE COURANT DOIT ÊTRE INSALLÉ À PROXIMITÉ DU MATÉRIEL ET DOIT ÊTRE AISÉMENT ACCESSIBLE. FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE AND RATING OF FUSE. POUR NE PAS COMPROMETTRE LA PROTECTION CONTRE LES RISQUES D’INCENDIE, REMPLACER PAR UN FUSIBLE DE MÊME TYPE ET DE MÊME CARACTÉRISTIQUES NOMINALES. DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISCARD USED BATTERIES ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS IL Y A DANGER D’EXPLOSION S’IL Y A REMPLACEMENT INCORRECT DE LA BATTERIE. REMPLACER UNIQUEMENT AVEC UNE BATTERIE DU MÊME TYPE OU D’UN TYPE RECOMMANDÉ PAR LE CONSTRUCTEUR. METTRE AU RÉBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS DU FABRICANT. iii) Safety Regulations Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver.
3 - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for a portable uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements: 1) Please do not attach any decorative components with metal parts to this equipment. 2) The antenna must not be co-located or operating in conjunction with any other antenna or transmitter. IDA Compliance Statement: (Singapore) This equipment registered to comply with IDA (Info-Communications Development Authority of Singapore) Standard under Dealer’s Class License. Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with IC RF exposure compliance requirements, please follow operation instruction as documented in this manual. For Taiwan 警語警語警語警語：：：： 經型式認證合格之低功率射頻電機經型式認證合格之低功率射頻電機經型式認證合格之低功率射頻電機經型式認證合格之低功率射頻電機，，，，非經許可非經許可非經許可非經許可，，，，公司公司公司公司、、、、商號商號商號商號或使用者均不得擅自變更頻率或使用者均不得擅自變更頻率或使用者均不得擅自變更頻率或使用者均不得擅自變更頻率、、、、加加加加大功率或變更原設計之特性及功能大功率或變更原設計之特性及功能大功率或變更原設計之特性及功能大功率或變更原設計之特性及功能。。。。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信低功率射頻電機之使用不得影響飛航安全及干擾合法通信低功率射頻電機之使用不得影響飛航安全及干擾合法通信低功率射頻電機之使用不得影響飛航安全及干擾合法通信；；；；經發現有干擾現象時經發現有干擾現象時經發現有干擾現象時經發現有干擾現象時，，，，應立即停應立即停應立即停應立即停用用用用，，，，並改善至無干擾時方得繼續使用並改善至無干擾時方得繼續使用並改善至無干擾時方得繼續使用並改善至無干擾時方得繼續使用。。。。前項合法通信前項合法通信前項合法通信前項合法通信，，，，指依電信法規定作業之無線電通信指依電信法規定作業之無線電通信指依電信法規定作業之無線電通信指依電信法規定作業之無線電通信。。。。低低低低功率射頻電機須忍受合法通信或工業功率射頻電機須忍受合法通信或工業功率射頻電機須忍受合法通信或工業功率射頻電機須忍受合法通信或工業、、、、科學及醫療用電波輻射性電機設備之干擾科學及醫療用電波輻射性電機設備之干擾科學及醫療用電波輻射性電機設備之干擾科學及醫療用電波輻射性電機設備之干擾 Actual size 9mm (H) x 17mm (W)
4 1. General 1.1 Model Specification Model : SD-3100 Dimension (in mm) : 36.0mm X 24.0mm X 2.1mm Weight : 10g Operating Temperature : 0 °C to +40 °C Humidity : 85% Max. Non-condensing IP Rating : Power Source : External : NA : Internal : Unitech PA500 SDIO slot
5 2.1 Dimension (in mm) 2.1.1 InfoPad (with protective rubber cover) 2.1.2 SD-3100 (ESL SD CARD) Top View Side View
6 2.2 Overall Layout 2.3 Key button Layout Power Key Display (With Touch Screen) Rear View Side View Cursor Key Enter Key Protecting rubber cover
7 Key Meaning • On/Off key. • Use this key to turn the power to the equipment on or off (This key is called the “POWER” key in this document). ENT • “Enter” key. • Use this key to confirm and execute operations. Cursor keys • Use these keys to move the cursor in the desired direction. Display 240x320 QVGA Colour Transflective TFT & Touch Screen & Backlight Protecting cover To secure the SD-3100 from damage due to drop test Touch panel operation: The equipment has a touch panel display. Tapping on the screen has the same effect as left tapping with the mouse. Method of screen tapping is explained below. Notation Meaning Tap • Similar to left tapping a mouse. Denotes “touching” a point on the screen. This is done to execute an operation. Double tap • Corresponds to double tapping a mouse. Denotes “double touching” a point on the screen. This is done to run a program. When tapping the screen, use your finger or a dedicated accessory stylus (a pen for tapping). Do not use a tool with a sharp edge in place of the dedicated stylus, as this may damage the panel.
8 2.4 Location of Magnet Area i. InfoPad Magnet Area is for activation of reed switch in RF receiver modules for DIGI proprietary communication purpose. ii. InfoPad Magnet Area & Price Tag Magnet Key Area normally is used for InfoPad printing sticker for selected tag item through the wireless sticker printer. Info Pad Magnet Area Price Tag Magnet Key Area InfoPad magnet location
BS-02 Base Station Service Manual 9 2.5 InfoPad IP Address And Configuration Setting 2.5.1 InfoPad Wireless IP Address Setting InfoPad is required to set the IP Address for identified in ESL system network communication. Procedure Picture 1) Press button to power on the InfoPad. 2) In the Info Cast main screen, touch [Exit] button. 3) When the password required message appear, enter the correct password and touch [OK]. Note: - Default password is [0]. - Password can be change in [Environment Setup] mode. 4) When the Windows CE screen display, tap the screen bottom white color bar to call out the function toolbar. 5) The Toolbar will show in bottom of screen.
BS-02 Base Station Service Manual 10 Procedure Picture 6) Select (Start)  Setting  Network and Dial-up Connection. 7) Select [CF8385PN1] icon and press [ENTER] key button. 8) Set the IP Address and Subnet Mask setting, after finish tap [OK] button to save change setting and exit. Example: IP Address: 192.168.50.150 Subnet Mask: 255.255.255.0
BS-02 Base Station Service Manual 11 3. Revision Records Serial No. Date Edition Status Description of Changes Software Version Remarks 001 Feb ‘09 00 First Release Tentative Edition

Navigation menu